Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2004

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 1501 - 1530 of 2785

Full-Text Articles in Engineering

Design And Implementation Of A String Matching System For Network Intrusion Detection Using Fpga-Based Bloom Filters, Sarang Dharmapurikar, Michael Attig, John Lockwood Mar 2004

Design And Implementation Of A String Matching System For Network Intrusion Detection Using Fpga-Based Bloom Filters, Sarang Dharmapurikar, Michael Attig, John Lockwood

All Computer Science and Engineering Research

Modern Network Intrusion Detection Systems (NIDS) inspect the network packet payload to check if it conforms to the security policies of the given network. This process, of-ten referred to as deep packet inspection, involves detection of predefined signature strings or keywords starting at an arbitrary location in the payload. String matching is a computationally intensive task and can become a potential bottleneck without high-speed processing. Since the conventional software-implemented string matching algorithms have not kept pace with the increasing network speeds, special purpose hardware solutions have been introduced. In this paper we show how Bloom filters can be used effectively …

Go to article

Structural Health Monitoring And Damage Detection Using An Intelligent Parameter Varying (Ipv) Technique, Soheil Saadat, Mohammad N. Noori, Gregory D. Buckner, Tadatoshi Furukawa, Yoshiyuki Suzuki Mar 2004

Structural Health Monitoring And Damage Detection Using An Intelligent Parameter Varying (Ipv) Technique, Soheil Saadat, Mohammad N. Noori, Gregory D. Buckner, Tadatoshi Furukawa, Yoshiyuki Suzuki

Office of the Dean (CENG) Scholarship

Most structural health monitoring and damage detection strategies utilize dynamic response information to identify the existence, location, and magnitude of damage. Traditional model-based techniques seek to identify parametric changes in a linear dynamic model, while non-model-based techniques focus on changes in the temporal and frequency characteristics of the system response. Because restoring forces in base-excited structures can exhibit highly non-linear characteristics, non-linear model-based approaches may be better suited for reliable health monitoring and damage detection. This paper presents the application of a novel intelligent parameter varying (IPV) modeling and system identification technique, developed by the authors, to detect damage in …

Go to article

Mar 2004, Tractor Museum Mar 2004

Mar 2004, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Curator's Report Director's Report Treasurer's Report

Go to article

Coplanar Air Launch With Gravity-Turn Launch Trajectories, David W. Callaway Mar 2004

Coplanar Air Launch With Gravity-Turn Launch Trajectories, David W. Callaway

Theses and Dissertations

The purpose of this study was to determine the feasibility of launching a vehicle based on the Boeing AirLaunch System in a coplanar, direct to rendezvous trajectory with gravity-turn. The focus of the research was to model the launch trajectory and determine the ability to reach different coplanar orbits. The launch trajectory was modeled using two-dimensional equations of motion and a boundary value problem was posed and solved for the gravity-turn trajectory. Trajectories were then created in an attempt to reach different altitudes through coasting and transfer orbits. Finally a specific orbital altitude was chosen and the trajectories were analyzed …

Go to article

Analytical Results For A Single-Unit System Subject To Markovian Wear And Shocks, Daniel E. Finkelstein Mar 2004

Analytical Results For A Single-Unit System Subject To Markovian Wear And Shocks, Daniel E. Finkelstein

Theses and Dissertations

This thesis develops and analyzers a mathematical model for the reliability measures of a single-unit system subject to continuous wear due to its operating environment and randomly occurring shocks that inflict a random amount of damage to the unit. Assuming a Markovian operating environment and shock arrival mechanism, Laplace-Stieltjes transform expressions are obtained for the failure time distribution and all of its moments. Moreover, an analytical expression is derived for the long-run availability of the single-unit system when it is subject to an inspect-and-replace maintenance policy. The analytical results are illustrated, and their results compared with those of Monte Carlo-simulated …

Go to article

Bioactive Materials, D. E. Day, Erik M. Erbe, Marina Richard, Joshua A. Wojcik Mar 2004

Bioactive Materials, D. E. Day, Erik M. Erbe, Marina Richard, Joshua A. Wojcik

Materials Science and Engineering Faculty Research & Creative Works

Bioactive substantially silica-free glass material with a hydroxyapatite layer thereon is described, as well as methods for producing hydroxyapatite on a borate glass.

Go to article

Analysis And Forecasting Of U.S. Navy Operating And Support (O&S) Costs For Rotary Aircraft, Christopher J. Wilkes Mar 2004

Analysis And Forecasting Of U.S. Navy Operating And Support (O&S) Costs For Rotary Aircraft, Christopher J. Wilkes

Theses and Dissertations

This research explores forecasting techniques to estimate the Cost per Flying Hour (CPFH) for Navy rotary aircraft. Three separate forecasting techniques were evaluated to better predict the CPFH for better estimating and budgeting by the U.S. Navy. The process begins by empirically analyzing Operating & Support cost categories for each helicopter. Trends were examined in CPFH. For forecasting purposes, actual CPFH figures were compiled from 1997 to 2003 for the CH-46D, the CH-53D, the MH-53E, the SH-60F, the UH-1N, and the UH-3H helicopters. The forecasting techniques explored were the 3-year moving average, the single exponential smoothing method, and Holt's linear …

Go to article

Coordinated Uav Target Assignment Using Distributed Calculation Of Target-Task Tours, David H. Walker Mar 2004

Coordinated Uav Target Assignment Using Distributed Calculation Of Target-Task Tours, David H. Walker

Theses and Dissertations

This thesis addresses the improvement of cooperative task allocation to vehicles in multiple-vehicle, multiple-target scenarios through the use of more effective preplanned tours. Effective allocation of vehicles to targets requires knowledge of both the team objectives and the contributions that individual vehicles can make toward accomplishing team goals. This is primarily an issue of individual vehicle path planning --- determining the path the vehicles will follow to accomplish individual and team goals. Conventional methods plan optimal point-to-point path segments that often result in lengthy and suboptimal tours because the trajectory neither considers future tasks nor the overall path. However, cooperation …

Go to article

Dynamic Contact Angles Under Evaporation, Robert M. Ybarra, Partho Neogi Mar 2004

Dynamic Contact Angles Under Evaporation, Robert M. Ybarra, Partho Neogi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Wetting kinetics in the presence of heat transfer, evaporation, and Marangoni effect has been explored using a method used by Joanny and de Gennes [C. R. Acad. Sci. Ser. II 299, 279 (1984)]. The method solves for the dynamic contact angle alpha by equating the rate of surface work to the rate of dissipation. The result in the form of dynamic contact angle alpha as a function of capillary number Ca agrees well with existing experimental data. Qualitative comparisons have been made in cases where quantitative data do not exist. Finally, a form of contact line instability is predicted, for …

Go to article

Explosion Dynamics Of Pyroclastic Eruptions At Santiaguito Volcano, Jeffrey B. Johnson, Andrew J. L. Harris, Steve T. M. Sahetapy-Engel, Rudiger Wolf, William I. Rose Mar 2004

Explosion Dynamics Of Pyroclastic Eruptions At Santiaguito Volcano, Jeffrey B. Johnson, Andrew J. L. Harris, Steve T. M. Sahetapy-Engel, Rudiger Wolf, William I. Rose

Department of Geological and Mining Engineering and Sciences Publications

In Jan. 2003 we monitored explosions at Santiaguito Volcano (Guatemala) with thermal, infrasonic, and seismic sensors. Thermal data from 2 infrared thermometers allowed computation of plume rise speeds, which ranged from 8 to 20 m/s. Rise rates correlated with cumulative thermal radiance, indicating that faster rising plumes correspond to explosions with greater thermal flux. The relationship between rise speeds and elastic energy is less clear. Seismic radiation may not scale well with thermal output and/or rise speed because some of the thermal component may be associated with passive degassing, which does not induce significant seismicity. But non-impulsive gas release is …

Go to article

Causes Of Proteolytic Degradation Of Secreted Recombinant Proteins Produced In Methylotrophic Yeast Pichia Pastoris: Case Study With Recombinant Ovine Interferon-Τ, Mehmet İnan, Michael M. Meagher, Bradley A. Plantz, Jayanta Sinha Mar 2004

Causes Of Proteolytic Degradation Of Secreted Recombinant Proteins Produced In Methylotrophic Yeast Pichia Pastoris: Case Study With Recombinant Ovine Interferon-Τ, Mehmet İnan, Michael M. Meagher, Bradley A. Plantz, Jayanta Sinha

Papers in Biochemical Engineering

It was observed that during fermentative production of recombinant ovine interferon-τ (r-oIFN-τ) in Pichia pastoris, a secreted recombinant protein, the protein was degraded increasingly after 48 h of induction and the rate of degradation increased towards the end of fermentation at 72 h, when the fermentation was stopped. Proteases, whose primary source was the vacuoles, was found in increasing levels in the cytoplasm and in the fermentation broth after 48 h of induction and reached maximal values when the batch was completed at 72 h. Protease levels at various cell fractions as well as in the culture supernatant were …

Go to article

Low Temperature Hall Measurements Of Neutron Irradiated Silicon Carbide, Angelo M. Bonavita Mar 2004

Low Temperature Hall Measurements Of Neutron Irradiated Silicon Carbide, Angelo M. Bonavita

Theses and Dissertations

The purpose of this research was to search for evidence of low temperature annealing from neutron irradiated 4H-silicon carbide. No features suggesting annealing were found below a temperature of 340K. Temperature dependant Hall effect measurements were taken over a range of 100K to 340K recording resistivity, carrier densities, and mobility. Resistivity was noted to increase with irradiations, and carrier densities appeared to decrease, while mobility appeared minimally affected by neutron irradiation. This suggests the creation of active acceptor defects decreasing carrier concentrations. N-type samples measured were 5mm x 5mm square with Nickel contacts, and irradiated to 1010 and 10 …

Go to article

The Contextable: Building And Testing An Intelligent, Context-Aware Kitchen Table, Daniel Matthew Hoopes Mar 2004

The Contextable: Building And Testing An Intelligent, Context-Aware Kitchen Table, Daniel Matthew Hoopes

Theses and Dissertations

The purpose of this thesis was to design and evaluate The ContexTable, a context-aware system built into a kitchen table. After establishing the current status of the field of context-aware systems and the hurdles and problems being faced, a functioning prototype system was designed and built. The prototype makes it possible to explore established, untested theory and novel solutions to problems faced in the field.

Go to article

A Comprehensive Model For Technology Push Product Development, Gregory Loren Bishop Mar 2004

A Comprehensive Model For Technology Push Product Development, Gregory Loren Bishop

Theses and Dissertations

Successful product development has been a fundamental part of many of today's companies and their continued prosperity depends on continuing to develop new products in the future. There are many models of product development. The two most common classes of development are market pull (MP) and technology push (TP). TP product development differs from MP in that the development begins with a specified technology rather than a specified customer. Because TP development is generally considered more difficult and challenging, most of the product development research has focused on MP development and many researchers and practitioners favor MP development over TP …

Go to article

Transmission Strategies For Wireless Multi-User, Multiple-Input, Multiple-Output Communication Channels, Quentin H. Spencer Mar 2004

Transmission Strategies For Wireless Multi-User, Multiple-Input, Multiple-Output Communication Channels, Quentin H. Spencer

Theses and Dissertations

Multiple-Input, Multiple-Output (MIMO) processing techniques for wireless communication are of interest for next-generation systems because of their potential to dramatically improve capacity in some propagation environments. When used in applications such as wireless LAN and cellular telephony, the MIMO processing methods must be adapted for the situation where a base station is communicating with many users simultaneously. This dissertation focuses on the downlink of such a channel, where the base station and all of the users have antenna arrays. If the transmitter has advance knowledge of the users' channel transfer functions, it can use that information to minimize the interuser …

Go to article

High-Torque Capacity Compliant Centrifugal Clutches, Ryan G. Weight Mar 2004

High-Torque Capacity Compliant Centrifugal Clutches, Ryan G. Weight

Theses and Dissertations

This thesis developed high-torque-capacity floating opposing arm clutches that are manufactured with standard economical manufacturing processes, while maintaining critical performance characteristics. Contact engagement speed and torque capacity models were created for the Hoffco-Comet, floating-opposing-arm (FOA), and floating 1 (F1) clutches. Sensitivity analyses were performed to identify key design parameters. A robust compliant FOA clutch was designed by minimizing the tolerance for both contact engagement speed and torque capacity. The robust design insures that the clutch will operate within the prescribed application constraints. Additional modeling showed that using a layered clutch would significantly tighten the contact engagement speed and torque performance …

Go to article

Floodplain Risk Analysis Using Flood Probability And Annual Exceedance Probability Maps, Christopher M. Smemoe Mar 2004

Floodplain Risk Analysis Using Flood Probability And Annual Exceedance Probability Maps, Christopher M. Smemoe

Theses and Dissertations

This research presents two approaches to determining the effects of natural variability and model uncertainty on the extents of computed floodplain boundaries. The first approach represents the floodplain boundary as a spatial map of flood probabilities -- with values between 0 and 100%. Instead of representing the floodplain boundary at a certain recurrence interval as a single line, this approach creates a spatial map that shows the probability of flooding at each point in the floodplain. This flood probability map is a useful tool for visualizing the uncertainty of a floodplain boundary. However, engineers are still required to determine a …

Go to article

Reports Of The Das02 Working Groups, Elisa Barney Smith, David Monn, Harsha Veeramachaneni, Koichi Kise, Alessio Malizia, Leon Todoran, Adnan El-Nasan, Rolf Ingold Mar 2004

Reports Of The Das02 Working Groups, Elisa Barney Smith, David Monn, Harsha Veeramachaneni, Koichi Kise, Alessio Malizia, Leon Todoran, Adnan El-Nasan, Rolf Ingold

Electrical and Computer Engineering Faculty Publications and Presentations

This document is a collection of four working group reports in the areas of digital libraries, document image retrieval, layout analysis, and Web document analysis. These reports were the outcome of discussions by participants at the Fifth IAPR International Workshop on Document Analysis Systems held in Princeton, NJ on 19-21 August 2002.

Go to article

Analysis And Design Of Low-Jitter Oscillators, Justin Jennings Fitzpatrick Mar 2004

Analysis And Design Of Low-Jitter Oscillators, Justin Jennings Fitzpatrick

Theses and Dissertations

This thesis presents an examination of the jitter performance of different oscillator types in the presence of flicker noise, white noise and power supply noise. Key results are achieved using time domain simulations to determine cycle jitter of several different oscillator architectures, semiconductor processes and component features. In the end, a design procedure is developed for creating a low-jitter oscillator in a TSMC .25mm CMOS semiconductor process.

Go to article

Bio-Chip, Photoluminescent Methods For Identifying Biological Material, And Apparatuses For Use With Such Methods And Bio-Chips, Ravi F. Saraf Mar 2004

Bio-Chip, Photoluminescent Methods For Identifying Biological Material, And Apparatuses For Use With Such Methods And Bio-Chips, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Patents

A method detects binding of molecules, advantageously without tagging molecules in the sample. A sensor is used in which is included a single stranded nucleic acid sequence and a photoluminescent material in respective layers. After the sensor is exposed to a biological sample for sufficient time for its single stranded nucleic acid sequence to bind to a material of interest, photoluminescence from the sensor can be measured. An apparatus for tagging-free detection of binding of molecules also is provided. Methods of making tagging-free sensors are provided. Also, tagging-free methods to detect binding of antigens and related devices are disclosed.

Go to article

Purchasing And Supply Chain Management Costing: An Air Transport Perspective Derived Through Commercial Air Cargo Firms, Kurt Ettrich Mar 2004

Purchasing And Supply Chain Management Costing: An Air Transport Perspective Derived Through Commercial Air Cargo Firms, Kurt Ettrich

Theses and Dissertations

The Air Force has struggled to completely understand the costs associated with its operations. The issue of understanding cost is complex, involving many perspectives, methods and techniques. When examined from a broad standpoint, total supply chain costs can include a firm's costs plus upstream and downstream costs. This perspective takes vendors, suppliers and end customers into consideration. From this broad standpoint, the Air Force does not know its total supply chain cost. Since the Air Force's supply chain is too broad to be a focus of this study, a smaller segment was chosen for a closer look. Specifically, air cargo …

Go to article

Full-Scale Lateral-Load Tests Of A 3x5 Pile Group In Soft Clays And Silts, Jeffrey L. Snyder Mar 2004

Full-Scale Lateral-Load Tests Of A 3x5 Pile Group In Soft Clays And Silts, Jeffrey L. Snyder

Theses and Dissertations

A series of static lateral load tests were conducted on a group of fifteen piles arranged in a 3x5 pattern. The piles were placed at a center-to-center spacing of 3.92 pile diameters. A single isolated pile was also tested for comparison to the group response. The subsurface profile consisted of cohesive layers of soft to medium consistency underlain by interbedded layers of sands and fine-grained soils. The piles were instrumented to measure pile-head deflection, rotation, and load, as well as strain versus pile depth.

Go to article

A Linear Subspace Approach To Burst Communication Signal Processing, Daniel E. Gisselquist Mar 2004

A Linear Subspace Approach To Burst Communication Signal Processing, Daniel E. Gisselquist

Theses and Dissertations

This dissertation focuses on the topic of burst signal communications in a high interference environment. It derives new signal processing algorithms from a mathematical linear subspace approach instead of the common stationary or cyclostationary approach. The research developed new algorithms that have well-known optimality criteria associated with them. The investigation demonstrated a unique class of multisensor filters having a lower mean square error than all other known filters, a maximum likelihood time difference of arrival estimator that outperformed previously optimal estimators, and a signal presence detector having a selectivity unparalleled in burst interference environments. It was further shown that these …

Go to article

Experimental Investigation Into The Aerodynamic Performance Of Both Rigid And Flexible Wing Structured Micro-Air-Vehicles, Anthony M. Deluca Mar 2004

Experimental Investigation Into The Aerodynamic Performance Of Both Rigid And Flexible Wing Structured Micro-Air-Vehicles, Anthony M. Deluca

Theses and Dissertations

The Air Force Research Lab, Munitions Directorate, Eglin Air Force Base, Florida has designed a man-portable carbon-fiber Micro-Air-Vehicle (MA V) used for on-the-spot surveillance by Special Operations Forces (SOF) for enemy reconnaissance as well as post-strike Battle Damage Assessment (BDA).The main goals of this experiment are: 1) characterize the flow quality of the new AFIT 3' x 3' wind tunnel and 2) determine the aerodynamic performance characteristics of the 24" span, 6" chord flexible and rigid wing MA V s. The turbulent intensity of the wind tunnel was approximately 2%. Both MA Vs had an average lift slope within 3.5% …

Go to article

Evaluating The Navigation Potential Of The National Television System Committee Broadcast Signal, Ryan J. Eggert Mar 2004

Evaluating The Navigation Potential Of The National Television System Committee Broadcast Signal, Ryan J. Eggert

Theses and Dissertations

The accuracy and worldwide availability of the Global Positioning System (GPS) make it the dominant system for navigation and precise positioning. Unfortunately, many situations arise in which GPS may not be adequate, e.g., urban navigation. This research evaluates the navigation potential of the National Television System Committee (NTSC) broadcast signal using a time-difference-of-arrival (TDOA) algorithm. TDOA measurements are made using NTSC broadcast signals collected from low and high multipath environments. These measurements are then used to evaluate the severity and dynamic effects of NTSC broadcast multipath signals. Three data reduction algorithms were developed--one that modifies the classical cross-correlation TDOA approach, …

Go to article

Simulating A Chromotomographic Sensor For Hyperspectral Imaging In The Infrared, Anthony J. Dearinger Mar 2004

Simulating A Chromotomographic Sensor For Hyperspectral Imaging In The Infrared, Anthony J. Dearinger

Theses and Dissertations

Hyperspectral imaging systems passively sense radiant electromagnetic energy from a remote scene to form a three dimension profile of the remote scene. The data contained in this profile describes real images of the remote scene for a certain number of spectral wavelength bands across a finite spectral range of electromagnetic radiation. Typical grating type hyperspectral imaging systems collect spectral electromagnetic radiation in the visible and near infrared spectral range, by incrementally scanning across the spatial extent of the remote scene. The legacy of low optical throughput because of the optical scanning techniques employed in these systems means adapting these systems …

Go to article

Monotonic, Creep-Rupture, And Fatigue Behavior Of Carbon Fiber Reinforced Silicon Carbide (C/Sic) At An Elevated Temperature, John M. Engesser Mar 2004

Monotonic, Creep-Rupture, And Fatigue Behavior Of Carbon Fiber Reinforced Silicon Carbide (C/Sic) At An Elevated Temperature, John M. Engesser

Theses and Dissertations

The main objective of this research effort was to examine the impact that cyclic loading frequency has on the life of a C/SiC composite at an elevated temperature of 550°C. Cyclic loading of C/SiC was investigated at frequencies of 375 Hz, 10 Hz, 1 Hz, and 0.1 Hz. Creep-Rupture tests and tests that were combinations of creep-rupture and fatigue were also accomplished. A monotonic tensile test was performed at 550°C and compared to a room temperature monotonic test. This study showed that an elevated temperature of 550°C has very little effect on the Ultimate Tensile Strength (UTS) of C/SiC. The …

Go to article

An Experimental Design For Measuring In Situ Radiation Damage To A Piezoelectric Transducer, Michael R. Severson Mar 2004

An Experimental Design For Measuring In Situ Radiation Damage To A Piezoelectric Transducer, Michael R. Severson

Theses and Dissertations

An experiment was conducted investigating the use of an acoustic pulse waveguide to collect response measurements from three piezoelectric acoustic emission (AE) transducers while the transducers were exposed to an active nuclear reactor neutron flux ranging from 1 x 1011 to 2.4 x 1012 neutrons per sq cms. Material, mechanical, and radiation studies were performed to determine a practical design for the construction of the experiment. Discreet frequency pulses generated by an Arbitrary Waveform Generator were transmitted by an aluminum waveguide to the core of the Ohio State University Research Reactor (OSURR). Three AF transducers coupled to the …

Go to article

An Analysis Of The Potential For Using Over-The-Horizon Radar Systems For Space Surveillance, Matthew J. Colbert Mar 2004

An Analysis Of The Potential For Using Over-The-Horizon Radar Systems For Space Surveillance, Matthew J. Colbert

Theses and Dissertations

The Australian Defence Force is investigating the development of a space surveillance system. While several dedicated facilities for space surveillance are in operation around the world, Australia s Over-The-Horizon Radar (OTHR) network has some potential for this role. The OTHR operates in the HF band and is constrained by the propagation effects of the ionosphere. A spherically stratified ionospheric model and a model for a nominal OTHR antenna are developed that allow calculation of path propagation, power distribution, and clutter returns. A software-based radar receiver processing system is modeled to determine detection probabilities and the minimum detectable radar cross-section of …

Go to article

Autonomous Landing Of A Rotary Unmanned Aerial Vehicle In A Non-Cooperative Environment Using Machine Vision, Joshua Martin Hintze Mar 2004

Autonomous Landing Of A Rotary Unmanned Aerial Vehicle In A Non-Cooperative Environment Using Machine Vision, Joshua Martin Hintze

Theses and Dissertations

Landing an Unmanned Aerial Vehicle (UAV) is a non-trivial problem. Removing the ability to cooperate with the landing site further increases the complexity. This thesis develops a multi-stage process that allows a UAV to locate the safest landing site, and then land without a georeference. Machine vision is the vehicle sensor used to locate potential landing hazards and generate an estimated UAV position. A description of the algorithms, along with validation results, are presented. The thesis shows that software-simulated landing performs adequately, and that future hardware integration looks promising.

Go to article

First Prev Next Last