Engineering Commons^™

The Electrochemical Behaviors Of A Novel Ferrocene Alkylthiol Sams On Au Electrode, Xiao-Gang Zhang, Yan-Li Shi, Hu-Lin Li

Journal of Electrochemistry

A novel alkylthiol molecule containing ferrocene and pyridium moieties and its hydrogenated products were synthesized and subsequently assembled on Au electrode as SAMs. Cyclic voltammogram(CV) was used to investigate the structure-dependent electrochemical response of the SAMs in 0.1 mol/L HClO₄ aqueous solution.

Initial Stages Of Pd Deposition Onto Au(111) Electrodes From Pdso4, Jing Tang, Petri M., Kibler L.A., Kolb D.M.

Journal of Electrochemistry

Metal thin films have attracted considerable interest in relation to catalysis, energy, material, corrosion and environmental protection. Pd thin film is capable of proton reduction and strong hydrogen absorption, which has shown electrocatalytic activity to the oxidation of small organic molecules. In this paper, in-situ STM measurements are performed to study the deposition process and the influence of the surface structure and anion adsorption. When Pd is deposited from PdSO₄ solution on Au(111) in the UPD range, a monolayer of Pd with pseudomorphic (1×1) structure was formed on the substrate with induced (3×7) R19° SO₄^2- adsorption. With …

Recent Progress In The Research On Electrodeposition Of Composite Coatings, Xiao-Bing Liu, Xu-Cheng Wang, Yu Chen, Dan-Hong Cheng, Zu-Zhan Yu

Journal of Electrochemistry

Recent progress in the research on composite coatings prepared by electroplating technology is reviewed. The nanoscaled particles, electrocatalytic, photoactive composite coatings are emphatically discussed. The composite coatings prepared by dispersing nanoscaled particles could attain better hardness, wear resistance and corrosion resistance than those of composite coatings which prepared by adding micronscaled particles. As compared with pure metal electrode and alloy electrode, some electrocatalytic composite coatings electrode could markedly reduce the overvoltages of cathodic and anodic electrode reaction. In recent years, the electrocatalytic composite coatings which based on metal oxides and conductive polymer as matrix materials become a newest field of …

Preparation And Electrochemical Preformance Of Zn-La Alloys, Xian-Ling Meng, Hua-Bin Yang, En-Dong Yang, Xiao-Dan Wang, Hai-Chang Zhang, Jun-Hong Wang, Zuo-Xiang Zhou

Journal of Electrochemistry

Zn-La alloys were prepared by solid phase diffusion method and the effects of La on the electrochemical performance of zinc electrodes were investigated using potentiostatic polarization technique and charging/discharging cycle test. The results showed that adding La to zinc electrode remarkably suppressed the zinc dendrite, the shape of zinc electrode and zinc corrosion, and hence, markedly improved the cycle performance of zinc electrodes. The discharging capacity of the zinc electrode containing 0.5at.% La which was the optimum was still 520 mAh/g after it cycled 80s at the current of 100 mA. The XPS showed that La element mainly adhered on …

Microstructure And Electrochemical Characteristics Of The Anodic Film Formed On Aluminum Surface, Jeng-Kuei Chang, Chi-Min Liao, Chih-Hsiung Chen, Wen-Ta Tsai

Journal of Electrochemistry

The thickness, morphology, chemical composition, and crystallinity of the anodized film formed on aluminum were examined in a transmission electron microscope (TEM). Thin foil for TEM analysis was prepared by ultramicrotomy. The relationship between the microstructure and the electrochemical characteristics of the alumina film forming on the pure aluminum was discussed in this investigation. At the forming voltage less than 100V, the anodized films formed at 85 ℃in aqueous ammonium adipate electrolyte was amorphous in nature. Although the film resistance was increased with the forming voltage, its dielectric constant was not changed significantly. As the forming voltage exceeded 100V, crystalline …

Oxidation Behavior Of Zr-Cu-Al-Ni Amorphous Alloys In Air At 300～500℃, H. H. Hsieh, W. Kai, T. G. Neih, Y. Kawamura

Journal of Electrochemistry

The oxidation behavior of the Zr- based bulk amorphous alloy (BMG; Zr-30Cu-10Al-5Ni in at.%) was studied in dry air over the temperature range 300～500 ℃. The kinetic results indicated that the amorphous alloy oxidized linearly at 300 ℃, while the parabolic oxidation was observed at 350～425 ℃, and the oxidation behavior at 500 ℃ was irregular and complicated. In general, the scales formed on the surface of the amorphous alloy were temperature-dependent, consisting of tetragonal-ZrO₂ at 300 ℃, and of mostly tetragonal-ZrO₂ as well as minor amounts of monoclinic-ZrO₂ and CuO at T ≥ 350 ℃.

Selective Corrosion In Duplex Stainless Steel, Wen-Ta Tsai, Kuen-Ming Tsai, Chang-Jian Lin, Yan Fu

Journal of Electrochemistry

In duplex stainless steel, the two constituent phases, namely ferritic (α) and austenitic (γ) phases, have different crystal structure and chemical composition. They may thus exhibit different corrosion resistances in aqueous environment. In this investigation, an electrochemical technique with spatial resolution was employed to measure the potential difference between these two constituent phases in 2205 duplex stainless steel. Image analyzing techniques were also used to examine the preferential corrosion between α and γ phases. The experimental results showed that ferrite had a higher potential than austenite in 0.01 mol/L NaCl solution. In 2 mol/L H₂SO₄+x mol/L …

Electrochemical Monitoring On The Deactivation Of A Metallic Oxide Anode, Li-Kun Xu, Shi-Zhe Song, Ting-Yong Wang, Guang-Zhang Chen

Journal of Electrochemistry

The process of accelerated life test of an IrO₂/Ta₂O₅ coated titanium anode was monitored using cyclic voltammetry and electrochemical impedance spectroscopy. The vatiation with electrolysis time of anodic voltammetric charge Q^*, the double layer capacitance C_dl,the oxide film resistance R_f and the charge transfer resistance R_ct for oxygen evolution was measured. A deactivation mechanism was proposed based on the observation results.

Corrosion Behavior Of Reinforcing Steel In Concrete Subjected To Chloride Contamination By Eis, Rong-Gang Hu, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

Electrochemical impedance spectroscopy(EIS) was employed to study the influence of chloride on the corrosion behavior of reinforcing steel in concrete. In Nyquist plot, the spectrum consists of two semicircles, indicating that the reinforced concrete system contained two time constants,one derived from electrical double layer of reinforcing steel and the other from the deposition film of concrete layer. The depressed semicircle in lower frequency featured the non-faradic behavior of the electrical double layer (EDL) deviated from idea capacitor due to diffusive effect which was attributed to the surface roughness of rebar and the inhomogenity of concrete layer. Then the EDL was …

Corrosion Behavior Of Mg1.85Mm0.15Ni Hydrogen Storage Alloy Modified By Electroless Cu In Ch3Ohâ·H2O Solutions, Hua-Bin Yang, Hai-Chang Zhang, Hua Sun, Xiao-Dan Wang, Zuo-Xiang Zhou

Journal of Electrochemistry

The corrosion behavior of the Mg_1.85Mm_0.15Ni (Mm:Ce-rich mischmetal) alloy modified by electroless Cu coating in different CH₃OH-H₂O solutions has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy. These results showed that the corrosion behavior was improved after electroless Cu. The potentiodynamic polarization and electrochemical impedance spectroscopy results showed that the alloy electrode had more promising anti-corrosion behavior after coated in a 40%CH₃OH-H₂O solution. The values of corrosion current density and electrode reaction resistance were 5.6 mA·cm^-2 (11.7 mA·cm^-2 for uncoated alloy electrode) and 22.25 Ω·cm …

Synthesis And Electrochemical Characteristics Of Nickel-Based Complex Oxide LiANi0.78Co0.2Cd0.02O2, Rong-Zhong Yuan, Mei-Zhen Qu, Zuo-Long Yu

Journal of Electrochemistry

The nickel-based complex oxide Li_aNi_0.78Co_0.02O₂ cathode materials for lithium-ion rechargeable batteries was synthesized by the improved solid-state reaction method with LiOH·H₂O, ball-like Cd-doped Ni(OH)₂ and Co₂O₃ as raw materials. The analysis ICP-AES proved that the as-prepared compounds were near the stoichiometric form. The XRD, SEM and electrochemical characteristics testing were also carried out. The results showed that the complex cathode material Li_aNi_0.78Co_0.2Cd_0.02O₂ has layered structure, homogeneous surface distributions,uniform particles with good crystal morphology as well as stable electrochemical …

Perfluorinated Sulfonic Acid Lithium Conductivity Humidity Sensor, Hong-Feng Xu, Jing Liu, Li Wan

Journal of Electrochemistry

Treat carbon paper with 3% PTFE solution and dried in 340 ℃ for 40 minutes to enhance its intension, and level off the surface of the carbon paper with a mixture of XC-72 carbon black and PTFE solution. With those treated carbon paper as electrodes, recast Nafion thin film from 5% Nafion solution as humidity sensitive material, a solid polymer electrolyte humidity sensor was prepared on a thin PET film. Take the relative humidity data from several saturated salt solutions, the relationship between conductivity response and relative humidity was studied at different relative humidies .The results showed: when the polymer …

Conductance Properties For Electrolyte Of Lithium Ion Battery At Low Temperature, Jing-Li Han, Yan-Mei Yu, Jian Chen, Chun-Tong Wang

Journal of Electrochemistry

The system of LiPF₆-ethylene carbonate (EC)-methy1 acetate (MA) was studied. The conductivities of this system were measured under various composition and various salt concentrations at temperature range of 20～-50 ℃. The optimum composition of this system was selected. The tests of cyclic voltammography and charge-discharge were carried out. This system was compared with commercial electrolyte solution.

Corrosion Prediction Of Carbon Steel In Concentrated Lithium Bromide Solutions At High Temperature Using Bp Neural Network, Nai-Bao Huang, Cheng-Hao Liang

Journal of Electrochemistry

Neutral network model has been developed for the computation of corrosion rate of carbon steel in LiBr solutions.The results indicate that the model is capable of reproducing the effects of changes in alkalinity, temperatures, LiBr and Na₂MoO₄ concentrations on the rates of general corrsion and good agreement between calculated and experimental corrosion rate is obtained. The model can be used to satisfactorily predict the corrosion rate of carbon steel in different concentrations of LiBr solutions containing different inhibitors at different temperatures. It also provides a novel method for corrosion monitoring of metals used in LiBr absorption chiller.

Effect Of Scn- On The Transition Current Of Zn During The Electrodeposition Zn-Co Alloys, Ren-He Yin, Wei-Min Cao, Zheng-Hua Fang

Journal of Electrochemistry

For co-deposition of Zn-Co alloys at sufphate baths with micro-concentration of SCN^- the transition current of Zn was found with the deposition process changing from normal Co-deposition to anomalous co-deposition, and the value of transition current increased with increasing SCN^- concentration, but decreased with increasing value of pH. The existence of SCN^- decreases the evolution overpotential of Co metal, but has no effects on the evolution overpotential of Zn metal and H₂.

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications Trp Task-10: Quarterly Progress Report (March 01 – May 31, 2003), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the elevated temperature tensile properties of Alloy EP- 823, a leading target material for accelerator-driven waste transmutation applications. This alloy has been proven to be an excellent structural material to contain the lead-bismuth-eutectic (LBE) nuclear coolant needed for fast spectrum operations. Very little data exist in the open literature on the tensile properties of this alloy. The test material will be thermally treated prior to the evaluation of its tensile properties at temperatures relevant to the transmutation applications. The deformation characteristics of tensile specimens, upon completion of testing, will be evaluated by …

Evaluation Of Nonlinear Static Procedures Using Strong-Motion Building Records, Rakesh K. Goel

Civil and Environmental Engineering

The objective of this investigation is to evaluate the FEMA-356 Nonlinear Static Procedure (NSP) and a recently developed Modal Pushover Analysis (MPA) procedure using recorded motions of buildings that were damaged during the 1994 Northridge earthquake. It is found the FEMA-356 NSP typically underestimates the drifts in upper stories and overestimates them in lower stories. The MPA procedure provides much-improved estimates of the response compared to the FEMA-356 NSP. In particular, the MPA procedure, unlike the FEMA-356 NSP, is able to capture the effects of higher modes.

Security Watch: No-Fly Zones And Flying Blind, Ibpp Editor

International Bulletin of Political Psychology

The article evaluates the gain in security from no-fly zones from a security perspective.

Unlv Transmutation Research Program Proposal Year Iii: Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The objective of this project is the design and evaluation of manufacturing processes for transmuter fuel fabrication. The large-scale deployment of remote fabrication and refabrication processes will be required for all transmutation scenarios. Current program emphasis is on a five-year effort to determine the feasibility of transmutation as a technology to limit the need for repository storage of spent commercial fuel. The evaluation of the fabrication processes will create a decision support data base to document design, operations, and costs. Fabrication processes required for different fuel types differ in terms of equipment types, throughput, and cost. Differential cost Implications of …

Preface, The Editors

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

No abstract provided.

Investigation Of Initial Fouling Rates Of Calcium Sulfate Solutions Under Non-Boiling Conditions (Work-In-Progress), Feridoun Fahiminia, A. Paul Watkinson , Norman Epstein

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

This study initiates an experimental investigation of how process variables such as temperature and velocity affect the initial precipitation fouling rate of the inverse solubility salt, calcium sulfate, under sensible heating conditions. The effect of fluid velocity and temperature on the delay time is also being measured.

Large-Scale Plasma Polymer Coating On Heat Exchanger Fins For Improving The Wettability, Ki-Hwan Kim, Dae-Hwan Yeu, Samchul Ha, Seok-Keun Koh

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

This research presents the results of the recently developed large-scale hydrophilic polymer coating by plasma polymerization, optimum plasma zone (OPZ) process. The excellent hydrophilicity of heat exchanger fin surface could give good effects to efficient drainage of condensate water as well as heat transfer performance. The hydrophilicity of layer treated by large-scale OPZ system is excellent irrespective of line speed from 0.6 m/min to 2.4 m/min. The good lateral uniformity of the hydrophilicity could be acquired in large scale OPZ treatment. The application of OPZ technique to the heat exchanger could enhance the efficiency of heat transfer, resulting from decrease …

Heat Exchanger Fouling In Phosphoric Acid Evaporators - Evaluation Of Field Data -, R. M. Behbahani, H. Müller-Steinhagen, M. Jamialahmadi

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

Multistage evaporators are frequently used in phosphoric acid plants to increase the concentration of dilute phosphoric acid to 52-55 wt% P₂O₅. The concentrated phosphoric acid solution is supersaturated with respect to calcium sulfate. As a result, part of the calcium sulfate in the liquor deposits on the heat exchanger tube walls. Since the thermal conductivity of these scales is very low, thin deposits can create a significant resistance to heat transfer. Therefore, regular cleaning of heat exchangers is required, frequently at less than biweekly intervals. As the major costs in modern phosphoric acid plants are the …

Fouling During The Use Of Seawater As Coolant - The Development Of A ‘User Guide’, S. Pugh, G.F. Hewitt, H. Müller-Steinhagen

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

ESDU International of London, UK has recently published a ‘User Guide’ on fouling in heat exchange systems using seawater as the coolant. Developed over a period of eighteen months in close collaboration with a team of oil refiners, heat transfer equipment and services suppliers and universities, with valuable input from the power industry, the User Guide is a practical guide to the current state of knowledge relating to fouling in cooling systems using seawater. Its objective is to provide the designer and the operator of both onshore and offshore equipment with a practical source of guidance on the occurrence, the …

Study Of The Influence Of Bulk Properties And Surface Tension On The Deposition Process Of Calcium Phosphate On Modified Stainless Steel, R. Rosmaninho, G. Rizzo, H. Müller-Steinhagen, L. F. Melo

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

In order to reduce the fouling caused by milk during heat treatment, it is important to know more about the deposition process of calcium phosphate, one of the main components of milk fouling, on stainless steel surfaces. The fouling behaviour of calcium phosphate is controlled by several factors related to both the fouling solution properties and the surface characteristics. The present work is focused on the influence of two of these factors: 1) the size and size distribution of the calcium phosphate aggregates formed in solution upon heating and 2) the surface tension values of the deposition surface. It was …

Crystallisation Fouling Of Mixed Salts During Convective Heat Transfer And Sub-Cooled Flow Boiling Conditions, A. Helalizadeh, H. Müller-Steinhagen, M. Jamialahmadi

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

The mechanisms of mixed salt crystallisation fouling on heat transfer surfaces have been investigated for convective and sub-cooled flow boiling heat transfer. Effects of various operating parameters such as solution composition and hydrodynamics of the system, on crystallisation fouling of mixtures of calcium sulphate and calcium carbonate have been studied experimentally. The results of the experiments were used to develop a mechanistic model for prediction of fouling resistances. Model predictions were compared with the measured experimental data when calcium sulphate and calcium carbonate form and deposit on the heat transfer surface, simultaneously. Deviations ranging from 6% to 25% were observed …

Sodium Aluminosilicate Solid Phase Specific Fouling Behaviour , Jonas Addai-Mensah, Jun Li, Marek Zbik, Scott Rosencrance

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

Process heat transfer equipment fouling due to sodium aluminosilicate precipitation is a serious problem that confronts high-level nuclear waste liquor and Bayer process alumina processing plants. The fouling of 316 stainless steel substrate by thermodynamically stable and unstable sodium aluminosilicate polytypes: amorphous solid, zeolite A, sodalite and cancrinite crystals, been has studied in an isothermal, batch precipitation system at 65 °C. Fouling invariably occurred via heterogeneous nucleation, crystal growth and particulate adsorption processes, accompanied by solution-mediated, phase transformation and morphological changes. For the thermodynamically stable cancrinite fouling, the amount of scale deposited increased systematically with increasing crystallization time before levelling …

Permanent Hydrophilic Surface Formation By Ion Assisted Reaction, Ki-Hwan Kim, Jun Sik Cho, Sung Han, Young Whoan Beag, Byung Ha Kang, Samchul Ha, Seok-Keun Koh

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

Since totally wettable hydrophilic polymer surfaces from hydrophobic polymers (PMMA, PTFE, PET and PC) have been demonstrated for the first time at Materials Research Society meeting, 1995 Fall meeting, Boston, the application of ion assisted reaction (IAR), in which energetic ions (0.5~1.5 keV) are irradiated on materials with blowing reactive gases near the irradiating surfaces, has been extended to various polymer, ceramic and metal for creating permanent hydrophilic surfaces. The surface energy was measured by Youngs equation and the highest energy, E_s, of 60~70 mN/m, which is similar to surface energy of water (E_s of H_{2 …}

Crystallization Fouling Of The Aqueous Two-Component System Caso4/Caco3, Volker Höfling, Wolfgang Augustin , Matthias Bohnet

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

Solutions, which cause fouling problems, consist mostly of more than one single component. Up to now only few studies concerning the fouling phenomena in such multicomponent systems exist. Therefore batch and continuous experiments with the aqueous two-component system CaSO₄/CaCO₃ were carried out, investigating especially the influence of pH-value on the fouling behaviour. As measure for the crystalline deposit the fouling resistance R_f was used.

The composition of the obtained fouling layers were analysed by x-ray diffraction and scanning electron microscopy (SEM). Further the strength of the crystalline deposits were determined in abrasion experiments. The measured abrasion …

A Comparison Of The Operating Characteristics Of Two Cooling Water Systems Using Chlorine And Chlorine Dioxide Biocides, T. R. Bott, I.E. C. Mott

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

Tests using side streams from an industrial cooling water system have been made to compare the corrosion rates associated with the use of chlorine and chlorine dioxide biocides. Two streams were employed, a "once through" and a recirculating system employing a cooling tower. The water used in the plant originated from a canal. The results of the tests revealed differences in characteristics between the circuits, depending on the biocide used and the operating conditions. The data obtained demonstrated a higher corrosion rate of 1.5 mpy with chlorine compared to 1.0 mpy using chlorine dioxide.