Engineering Commons^™

A Numerical Investigation Of Interior Resonances In The Hybrid Fem/Mom Method, Yun Ji, Hao Wang, Todd H. Hubing

Electrical and Computer Engineering Faculty Research & Creative Works

The interior resonance problem that can occur when using a hybrid finite-element method/method of moments (FEM/MoM) method to model electromagnetic scattering problems is investigated. Calculations of the bistatic radar cross section of a coated dielectric sphere are presented using different formulations, solution approaches, and solvers. The solutions using the electric-field integral equation have significant errors near an interior resonance frequency. When the combined-field integral equation is employed, satisfactory solutions can be obtained that do not depend on the particular solution approach or solver.

Comparison Of Particle Swarm Optimization And Backpropagation As Training Algorithms For Neural Networks, Ganesh K. Venayagamoorthy, Venu Gopal Gudise

Electrical and Computer Engineering Faculty Research & Creative Works

Particle swarm optimization (PSO) motivated by the social behavior of organisms, is a step up to existing evolutionary algorithms for optimization of continuous nonlinear functions. Backpropagation (BP) is generally used for neural network training. Choosing a proper algorithm for training a neural network is very important. In this paper, a comparative study is made on the computational requirements of the PSO and BP as training algorithms for neural networks. Results are presented for a feedforward neural network learning a nonlinear function and these results show that the feedforward neural network weights converge faster with the PSO than with the BP …

An Experimental Investigation Of Whirl Instability Including Effects Of Lubricant Temperature In Plain Circular Journal Bearings, Darryl, Jr. Chauvin

LSU Master's Theses

The purpose of this thesis is to experimentally investigate the effect of lubricant temperature on the presence of whirl instability in journal bearings. The first set of conditions that are studied is an extremely low eccentricity rotor and the occurrence of oil whirl at the start-up of the experiment. Lubricant temperature, bearing temperature, frequency and amplitude of vibration, and rotational speed are monitored and analyzed in relation to presence of whirl instability. Additionally, another rotor with a slightly higher eccentricity is tested with respect to the presence of such instability. Particularly with this rotor, the system is brought just below …

Nebraska Summary: S305 Challenger Mt 545, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S558 Massey Ferguson 5465, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1826: Case Ih Mx 230 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1832: New Holland Tg 285 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1823: Challenger Mt 835 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary S360a: Challenger Mt 445, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 412: Fendt 412 Vario Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 440: Fendt 712 Vario Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 443: John Deere 6415 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 558: Massey Ferguson 5465 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Self-Assembly Of Fept Nanoparticles Into Nanorings, Weilie L. Zhou, Jibao He, Jiye Fang, Tuyet-Anh Huynh, Trevor J. Kennedy, Kevin L. Stokes, Charles J. O'Connor

Physics Faculty Publications

The application of nanoparticles as quantum dots in nanoelectronics demands their arrangement in ordered arrays. Shape controlled self-assembly is a challenge due to the difficulties of obtaining proper self-assembling parameters, such as solvent concentration, organic ligands, and nanoparticle size. In this article, hard magnetic FePt nanoparticles were synthesized using a combination approach of reduction and thermal decomposition. The nanoparticles are about 4.5 nm and appeared as truncated octahedral enclosed by the

{100} and {111}

crystal facets of fcc structure. The nanoparticles are of hexagonal close packing and orient randomly in the self-assembly nanoarrays.  By diluting the solution for large-area self-assembly, …

Analytical Study On Flood Induced Seepage Under River Levees, Senda Ozkan

LSU Doctoral Dissertations

A common and potentially dangerous phenomenon associated with flooding is seepage under levees and the formation of sand boils. Seepage flow due to hydrostatic head gradients of floods may cause deformation of pervious layers leading to heave, piping and sand boils. Underseepage may also cause irreversible changes in the characteristics of the porous medium. A series of independent flood events may have cumulative effects on pervious layers causing sand boils to grow. Current underseepage analyses for levees are based on steady-state flow. Transient seepage flow due to rapid changes in river head may contribute to cumulative effects and cause critical …

Progressive Fatigue Effects On Manual Lifting Factors, Anthony D'Wayne Banks

LSU Doctoral Dissertations

Much evidence suggests that the cause of lower back pain (LBP) and injury is frequently related to the posture of lifting, the load, muscle fatigue, and other factors. The purpose of this study was to evaluate the effect of progressive fatigue on factors that have previously been associated with increased risk of LBP in various occupational settings, during a repetitive lifting task where freestyle lifting technique was utilized. A laboratory experiment was conducted to evaluate several fatigue analysis, electromyography amplitude, kinematic, and kinetic parameters of repetitive freestyle lifting during a 2-hour lifting period. Each of ten (10) young adult male …

Dynamic Modeling And Parameter Estimation For An Ethlyene-Propylene-Diene Polymerization Process, Rujun Li

LSU Doctoral Dissertations

New Page 1

A general dynamic model for continuous EPDM polymerization in which crosslinking and gel formation are attributable to reactions between pendant double bonds has been developed. A pseudo-kinetic rate constant method is introduced to construct a moment model for a pseudo-homopolymer that approximates the behavior of the actual terpolymer under long chain and quasi-steady state assumptions. The pseudo-homopolymer model is then used as the basis for application of the numerical fractionation method. The proposed dynamic model is capable of predicting polydispersities and molecular weight distributions near the gel point with as few as eleven generations, and in the …

Block-Level Discrete Cosine Transform Coefficients For Autonomic Face Recognition, Willie L. Scott, Ii

LSU Doctoral Dissertations

This dissertation presents a novel method of autonomic face recognition based on the recently proposed biologically plausible network of networks (NoN) model of information processing. The NoN model is based on locally parallel and globally coordinated transformations. In the NoN architecture, the neurons or computational units form distributed networks, which themselves link to form larger networks. In the general case, an n-level hierarchy of nested distributed networks is constructed. This models the structures in the cerebral cortex described by Mountcastle and the architecture based on that proposed for information processing by Sutton. In the implementation proposed in the dissertation, the …

The Behaviour Of Long-Span Reinforced Concrete Beams Under Various Loading Conditions., Ciaran O'Leary

Theses

The relative ease of design and construction of simple reinforced concrete beams provides an attractive option for structural engineering designers. However, where longer spans are involved it is more likely that prestressed concrete or possibly some form of steel beams will be preferred.

The primary cause of failure of longer span reinforced concrete beams is likely to be bending. However, the excessive deflection that might be associated with such beams must also be considered. When designing these beams, structural engineers make considerable use of span/effective depth ratios to select trial sections and check deflection limits. Such ratios are provided in …

Design For Signal Integrity In High Frequency, High Density Circuit Boards, Juan Manuel Talavera Martinez

Theses

The electronics market is continually seeking fast and small high performance products. The clock frequency in computer systems is often above 2GHz and new generations of laptops have considerably reduced in size. These features make printed circuit board (PCB) design more difficult than in the past.

This thesis is an investigation of the current design of high speed PCB. The complexity of this type of circuit makes the designer needs an extensive knowledge of the techniques used to generate a reliable signalling, in other words, signal integrity. To achieve this objective, the design community has to overcome several problem related …

Performance Evaluation Of Sip Based Services In Umts, Maria Isabel Pous Fenollar

Theses

With ever increasing penetration of IP technologies and the tremendous growth in wireless data traffic, the wireless industry is evolving the mobile core networks towards IP technology. The 3rd Generation Partnership Project (3GPP) is specifying an IP Multimedia Core Network Sub-System (IMS) in UMTS Release 5 and Release 6, which is adjunct to the UMTS GPRS core network. This IP-based network will allow mobile operators to provide commonly used Internet applications to wireless user. The UMTS IMS uses the Internet Engineering Task Force (IETF) defined text based Session Initiation Protocol (SIP), to control a wide range of anticipated IP-based services …

Transmission Property And Evanescent Wave Absorption Of Cladded Multimode Fiber Tapers, Shangping Guo, Sacharia Albin

Electrical & Computer Engineering Faculty Publications

Cladded multimode fiber optic tapers are proposed as chemical sensors using evanescent wave absorption. There is no need to strip the cladding; therefore, fabrication is easy and the taper is mechanically stronger than the taper without cladding. The transmission property and evanescent wave absorption are modeled using ray theory and wave theory, respectively. Effects of some parameters on the absorption sensitivity are analyzed numerically. Due to the presence of the cladding, the taper core is not in direct contact with the external medium, leading to some significant differences from the uncladded one, especially when the index of the external medium …

Forced Bubble Columns, Jia Ma

LSU Master's Theses

In many chemical, biochemical and pharmaceutical industrial processes, bubble breakage is very important for gas component to dissolve and react with surrounding liquid. The overall mass transfer performance can be improved greatly when the interfacial gas-liquid area is increased due to bubble breakup. In forced bubble columns operating at low forcing frequency (<30Hz) and small forcing amplitude (<3mm), bubbles undergo phenomenal breakage. Mass transfer coefficient, kLa, is increased to 250%~625% of the no forcing value depending on flow regime and configuration of membrane and piston. Two different mechanisms, induced shear slug breakage in the gas feeder tube for bubbly flow and resonant frequency bubble breakage in the column fluid phase for jet flow, seem to at work.

Structure And Mechanical Properties Of Ti-Si-N Coatings, Xiaodong Zhang

LSU Master's Theses

In order to better define conditions under which ~{!0~}super-strengthening~{!1~} occurs in the Ti-Si-N system, we performed detailed experimental studies on how the structure and mechanical properties of Ti-Si-N coatings are influenced by the deposition temperature. Different series of Ti-Si-N specimens were prepared in an inductively coupled plasma (ICP)-assisted reactive sputtering system at both low and high temperatures. Coating compositions were measured by Rutherford backscattering spectrometry (RBS) technique, surface roughness was examined on an atomic force microscope (AFM), coating thicknesses were obtained by performing cross-sectional scanning electron microscopy (SEM), and their structure examined with transmission electron microscopy (TEM). Vibrational frequency results …

A Disjoining Pressure For Small Contact Angles And Its Applications, Qingfang Wu

LSU Master's Theses

A thin liquid film experiences additional intermolecular forces when the film thickness h is less than roughly 100 nm. The effect of these intermolecular forces at the continuum level is captured by the disjoining pressure . Since dominates at small film thicknesses, it determines the stability and wettability of thin films. To leading order, a thin film can be treated as uniform and . This form, however, cannot be applied to films with non-zero contact angles. A recent ad-hoc derivation to include the slope leads to a that allows a contact line to move without slip. This work derives a …

Heat Transfer In Outdoor Aquaculture Ponds, Jonathan Lamoureux

LSU Master's Theses

An energy balance was developed for heated and unheated earthen aquaculture ponds to 1) determine the relative importance of energy transfer mechanism affecting pond temperature; 2) predict pond temperatures; 3) estimate the energy required to control pond temperatures, and 4) recommend efficient heating and cooling methods. PHATR (Pond Heating and Temperature Regulation), a computer program using 4th order Runge-Kutta numerical method was developed to solve the energy balance using weather, flow rate and pond temperature data. By comparing measured and modeled pond temperatures, the average difference (the average bias) was 0.5°C for unheated ponds and 2.4°C for heated ponds. The …

Thermohydrodynamic Analysis Of Compressible Gas Flow In Compliant Foil Bearings, Zhengchun Peng

LSU Master's Theses

This thesis deals with the development of mathematical models and numerical schemes for simulating the hydrodynamic pressure and temperature rise of compliant foil bearings lubricated by a thin gas film in between its compliant bearing surface and the rotating shaft. The model accounts for the compressibility of gas, the compliance of the bearing surface, and the interaction between the pressure field and temperature field of the gas film in the bearing system. Numerical solutions obtained over a fairly large range of operating speeds show excellent agreement with existing experimental data from both load performance test and bearing temperature measurement. A …

Immiscible And Miscible Gas-Oil Displacements In Porous Media, Madhav Mukund Kulkarni

LSU Master's Theses

Gas Injection is the second largest EOR process in U.S. To increase the extent of the reservoir contacted by displacing fluids, gas and water are injected intermittently - water-alternating-gas (WAG) process, is widely practiced. This experimental study is aimed at evaluating the WAG process performance in short and long cores as a function of gas-oil miscibility and brine composition. This performance evaluation has been carried out by comparing oil recoveries between WAG injection and continuous gas injection (CGI). Miscible (2500 psi) and immiscible (500 psi) floods were conducted using Berea cores, n-Decane and two different brines, namely the commonly used …

Precipitate Growth Features In The Duplex Size Gamma Prime Distribution In The Superalloy In738lc, Indranil Roy

LSU Master's Theses

IN738LC is a modern, nickel base superalloy utilized at high temperatures in aggressive environments. Durability of this superalloy is dependent on the retention of strengthening by Gamma Prime precipitates. The precipitate growth features in the duplex size (fine and coarse) precipitate distribution was studied by heating the alloy for various times in vacuum at selected temperatures in the range 800 °C to 1100 °C. Increasing the holding times from 1 hour to 100 hours shows joining of the fine particles to form bigger particles, leading to distinct raft patterns. Two different Gamma Prime precipitate growth processes had been observed: merging …

Freeway Accident Analysis Using Second Order Statistics, Khasim Khasimul Shaik

LSU Master's Theses

This research focuses on the use of historical freeway traffic data for comparison of the precursory traffic conditions to that accident occurrence by using 15-minute traffic speed contour maps. The second order statistics measures, namely angular second moment (ASM), contrast and entropy were used as the traffic performance measures in order to compare the two situations. The data used is from I-4 freeway traffic condition database, stored in a SQL server and 1999 year accident database for the same I-4 freeway. The study section is located in Orlando, Florida. The approach shows an approach to understand the performance of the …