Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2002

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 1741 - 1770 of 1791

Full-Text Articles in Engineering

Tapered Liga Mold Insert, Ryan Anthony Turner Jan 2002

Tapered Liga Mold Insert, Ryan Anthony Turner

LSU Master's Theses

The applications of microstructures produced by the LIGA process are useful in a broad range of fields including: microfluidics, heat transfer, and mechanics. The Microsystems Engineering Team at Louisiana State University has used the LIGA process as a foundation for the team’s productivity in these areas. Many advances in the processes involved in producing these microstructures have been made in the past increasing the efficiency of the entire process. A modified exposure technique in the lithography stage of the LIGA process is being developed to produce microstructures with a draft angle as opposed to the standard straight walled structures. Electroformed …

Go to article

Surfactant-Induced Relative Permeability Modifications For Oil Recovery Enhancement, Subhash C. Ayirala Jan 2002

Surfactant-Induced Relative Permeability Modifications For Oil Recovery Enhancement, Subhash C. Ayirala

LSU Master's Theses

Surfactants have been considered for enhanced oil recovery by reduced oil-water interfacial tension. However, these surfactants may enhance oil recovery via wettability alteration as well. This study experimentally determines the influence of surfactant type and concentration on oil recovery, oil-water relative permeabilities and wettability in reservoir rocks. Several coreflood experiments were conducted using Yates reservoir fluids in Berea rocks and two types of surfactants (nonionic and anionic) in varying concentrations. A coreflood simulator was used to calculate oil-water relative permeabilities by history matching recovery and pressure drop measured during the corefloods. These relative permeability variations were interpreted using Craig's rules-of-thumb …

Go to article

Numerical Studies Of Reactive Polymer Flows In Porous Materials, Honggao Liu Jan 2002

Numerical Studies Of Reactive Polymer Flows In Porous Materials, Honggao Liu

LSU Doctoral Dissertations

This dissertation presents a new numerical model of reactive polymer flow in heterogeneous porous media. A moment representation of the log-normal polymer molecular weight distribution is used to model polymer as a multi-component species. Three leading moments are used to simulate the polymer transport and reaction processes in a two-dimensional porous medium. A new operator splitting technique that allows the moment equations for polymerization to be incorporated into a finite-difference transport model is developed. The novelty of this approach is the use of two different dependent variables (for the transport versus reaction parts of the problem). It is significant from …

Go to article

Development Of A Phosphorus Management Model To Address Filamentous Algae In A Shallow, Subtropical, Urban Hypereutrophic Lake, Jennifer Eileen Ruley Jan 2002

Development Of A Phosphorus Management Model To Address Filamentous Algae In A Shallow, Subtropical, Urban Hypereutrophic Lake, Jennifer Eileen Ruley

LSU Master's Theses

City Park Lake is a shallow, subtropical, urban hypereutrophic lake located in Baton Rouge, Louisiana. By the late 1970’s, this artificial lake had experienced extreme eutrophication and suffered from frequent algal blooms and fish kills. Restoration of City Park Lake occurred in 1983 and consisted of dredging nutrient-laden sediments and the rehabilitation of sewage pipelines. Pre- and post-restoration water quality monitoring programs have provided valuable information by which to gage the long-term success of the restoration work. Following the restoration effort, dramatic improvements were observed in the lake including lower nitrogen, phosphorus and chlorophyll-a concentrations, reduced frequencies in algal blooms …

Go to article

Non-Linear Kinematic Hardening Model For Multiaxial Cyclic Plasticity, Marcio Costa Araujo Jan 2002

Non-Linear Kinematic Hardening Model For Multiaxial Cyclic Plasticity, Marcio Costa Araujo

LSU Master's Theses

A model of kinematic work hardening based on Frederick and Armstrong (1966), Phillips and Weng (1975), Chaboche (1979), and Voyiadjis and Basuroychowdhury (1998) is proposed for metal like behavior materials. In this proposed model, ratcheting is taken into account through the observation of the backstress evolution equation, modified by the addition of a new term, . Experimental observations made by Phillips and Lee (1979) showed that the direction of the movement of the center of the yield surface occurs in between the stress rate tensor and the plastic strain rate tensor directions. The new term, added to Chaboche model (1979), …

Go to article

Prediction Of Heat Transfer & Flow In Rotating Two-Pass Channels Connected By Holes., Achintya Kumar Pramanick Jan 2002

Prediction Of Heat Transfer & Flow In Rotating Two-Pass Channels Connected By Holes., Achintya Kumar Pramanick

LSU Master's Theses

A computational study of the effect of rotation on the velocity and thermal field for a two-pass channel connected by rows of holes on the divider wall has been conducted. Detailed velocity and Nusselt number distributions are presented inside the rotating two-pass coolant channel. The enhanced cooling in this passage design is achieved by a combination of impingement and crossflow-induced swirl. The cross flow is generated from one coolant passage to the adjoining coolant passage through a series holes placed along the dividing wall. The holes deliver the flow from one passage to another typically achieved in a conventional design …

Go to article

Cpl: A Language For Real-Time Distributed Object Programming, Erhan Saridoğan, Nadi̇a Erdoğan Jan 2002

Cpl: A Language For Real-Time Distributed Object Programming, Erhan Saridoğan, Nadi̇a Erdoğan

Turkish Journal of Electrical Engineering and Computer Sciences

As processing and time requirements of computer systems increase over the borders of single processor architectures, it is becoming more and more attractive to use distributed computing with additional real-time capabilities. In several cases, traditional programming languages have become insufficient to build distributed systems easily, especially when real-time issues and basic software quality factors are concerned. In this paper, a concurrent, object-oriented, distributed real-time programming language, CPL, with a supportive run-time system, namely the CORD-RTS, is introduced and new language features are described. The new language provides an efficient solution for command and control systems by embedding distribution and real-time …

Go to article

Approximations On The Aggregate Mpeg Video Traffic And Their Impact On Admission Control, Fati̇h Alagöz Jan 2002

Approximations On The Aggregate Mpeg Video Traffic And Their Impact On Admission Control, Fati̇h Alagöz

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, we investigate the aggregate traffic approximations for the Motion Pictures Expert Group (MPEG) coded variable bit rate (VBR) video traffic and their impact on admission control at a desired Quality of Service (QoS) level. In order to generate the MPEG coded VBR video traffic, we use a novel source model that employs a mixture of two first-order autoregressive processes with lognormally distributed residuals (2LAR). The model parameters are found based on least square estimates to capture the marginal distribution and autocorrelation function as well as the single server queuing behavior of an MPEG coded empirical bitstream. We …

Go to article

New Oscillator Topologies Using Inverting Second-Generation Current Conveyors, Ali̇ Toker, Hakan Kuntman, Oğüzhan Çi̇çekoğlu, Mehmet Di̇şçi̇gi̇l Jan 2002

New Oscillator Topologies Using Inverting Second-Generation Current Conveyors, Ali̇ Toker, Hakan Kuntman, Oğüzhan Çi̇çekoğlu, Mehmet Di̇şçi̇gi̇l

Turkish Journal of Electrical Engineering and Computer Sciences

In this work, new oscillator topologies based on a recently introduced active element, namely inverting second-generation current conveyor, are presented. This recently introduced unity gain based active element is suitable for integrated circuit realization and can easily be implemented with CMOS technology. Considering this fact, basic oscillator topologies employing a single, two and three conveyors are proposed. Several oscillator circuits based on these topologies are obtained. Expressions for oscillation conditions and frequencies are derived both for ideal and non-ideal cases. Some of them are single frequency and the others are variable frequency oscillators. The oscillators employing two and three active …

Go to article

Preface, Levent Sevgi̇ Jan 2002

Preface, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

No abstract provided.

Go to article

A Personel Note, Leopold B. Felsen Jan 2002

A Personel Note, Leopold B. Felsen

Turkish Journal of Electrical Engineering and Computer Sciences

No abstract provided.

Go to article

Electromagnetic Engineering In The 21^{St} Century: Challenges And Perspectives, Leopold B. Felsen, Levent Sevgi̇ Jan 2002

Electromagnetic Engineering In The 21^{St} Century: Challenges And Perspectives, Leopold B. Felsen, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

This paper aims at a broad-brush look at certain technological and educational challenges that confront wave-oriented electromagnetic (EM) engineering in the 21^{st} century, in a complex computer and technology-driven world with rapidly shifting societal and technical priorities. Simulation strategies for complex EM systems, both analytic and numerical, are reviewed and categorized, and are illustrated on selected practical complex multicomponent system scenarios currently under investigation in Turkey. Educational issues to ensure proper multidisciplinary exposure of new generations of computer-weaned students, who will have to deal with these problems, are touched upon as well.

Go to article

Iterative Solution Of Field Problems With A Varying Physical Parameter, Anton G. Tijhuis, Martijn C. Van Beurden, A. Peter M. Zwamborn Jan 2002

Iterative Solution Of Field Problems With A Varying Physical Parameter, Anton G. Tijhuis, Martijn C. Van Beurden, A. Peter M. Zwamborn

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, linear field problems with a varying physical parameter are solved with the conjugate-gradient FFT method and a dedicated extrapolation procedure for generating the initial estimate. The scheme is formulated and illustrated for two simple example problems. The importance of the choice of the stop criterion and the step size are demonstrated for the case of a straight thin-wire segment. A brief summary is given of the applications that have appeared in the open literature until now, and actual three-dimensional scattering problems for a rectangular conducting plate and an inhomogeneous, dispersive dielectric body are discussed. Finally, the case …

Go to article

Time-Domain Simulation Of Thin Material Boundaries And Thin Panels Using Digital Filters In Tlm, J. Paul, V. Podlozny, Dave Thomas, C. Christopoulos Jan 2002

Time-Domain Simulation Of Thin Material Boundaries And Thin Panels Using Digital Filters In Tlm, J. Paul, V. Podlozny, Dave Thomas, C. Christopoulos

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, the design and implementation of digital filters for the time-domain simulation of electromagnetic wave interaction with thin material boundaries and thin panels using the Transmission-Line Modelling (TLM) method are described. The technique is applied to the description of thin ferrite layers placed on the external boundaries of the modelled space and to plastic panels placed inside the modelled space. The approach is validated using one-dimensional examples having analytic solutions. Finally, the results obtained for the Shielding Effectiveness (SE) of a practical equipment enclosure are presented to demonstrate the utility of the method in Electromagnetic Compatibility (EMC) prediction.

Go to article

Network--Oriented Modeling Of Radiating Electromagnetic Structures, Peter Russer Jan 2002

Network--Oriented Modeling Of Radiating Electromagnetic Structures, Peter Russer

Turkish Journal of Electrical Engineering and Computer Sciences

The application of network-oriented modeling for radiating electromagnetic structures is investigated. Network methods are applied to the field problem using the segmentation technique and by specifying canonical Foster representations as compact models of reciprocal linear lossless electromagnetic structures. Connection between different subdomains is obtained via connection circuits exhibiting only ideal transformers. In the case of radiating structures, the complete structure is embedded into a sphere and the field outside the sphere is expanded into orthogonal spherical TM- and TE- waves. For each radiation mode a Cauer canonic circuit representation is given.

Go to article

Novel Time Domain Radiowave Propagators For Wireless Communication Systems, Funda Akleman, M. O. Özyalçin, Levent Sevgi̇ Jan 2002

Novel Time Domain Radiowave Propagators For Wireless Communication Systems, Funda Akleman, M. O. Özyalçin, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, novel time domain wave propagators are used in path loss calculations for macro and micro cell coverage planning in wireless communication systems. Both Transmission Line Matrix (TLM) and Finite-Difference Time-Domain (FDTD) based propagators, which were introduced recently and validated and verified on different canonical propagation scenarios, are used for this purpose. Examples are chosen both in rural and urban areas, where two propagators are compared with each other. Excellent agreement between the results obtained via two propagators is presented. The results presented here are very encouraging and these propagators are shown to be powerful tools for not …

Go to article

Aspects Of Radar Polarimetry, Ernst Luneburg Jan 2002

Aspects Of Radar Polarimetry, Ernst Luneburg

Turkish Journal of Electrical Engineering and Computer Sciences

This contribution is a tutorial introduction to the phenomenological theory of radar polarimetry for the coherent scatter case emphasizing monostatic backscattering and forward scattering (transmission). Characteristic similarities and differences between radar polarimetry and optical polarimetry and the role of linear and antilinear operators (time-reversal) are pointed out and typical polarimetric invariants are identified.

Go to article

Two-Dimensional Photonic Crystal L-Shaped Bent Waveguide And Its Application To Wavelength Multi/Demultiplexer, Yoshihiro Naka, Hiroyoshi Ikuno Jan 2002

Two-Dimensional Photonic Crystal L-Shaped Bent Waveguide And Its Application To Wavelength Multi/Demultiplexer, Yoshihiro Naka, Hiroyoshi Ikuno

Turkish Journal of Electrical Engineering and Computer Sciences

The bent waveguide is a key element for integrated optical signal processing waveguide devices. We propose a new type of two-dimensional photonic crystal L-shaped bent waveguides with additional pillars at the corner. Using the FDTD method based on the principle of multidimensional wave digital filters we simulate its transmission characteristics and show an excellent transmission of light in L-shaped bent waveguide. As an application we design compact size multi/demultiplexer composed of the L-shaped bent waveguides and directional couplers and realize multi/demultiplexer with low-insertion loss and high extinction ratio device whose size is of the order of the wavelength of light.

Go to article

Discrete Array Representation Of Continuous Space-Time Source Distributions, Amir Shlivinski, Ehud Heyman Jan 2002

Discrete Array Representation Of Continuous Space-Time Source Distributions, Amir Shlivinski, Ehud Heyman

Turkish Journal of Electrical Engineering and Computer Sciences

We consider the realization of a continuous space-time source distributions using a sparse non-uniform point-source array. The construction determines the largest possible cells corresponding to the local source parameters in order to obtain a sparse array, while meeting an error criterion on the pulsed radiation pattern. The scheme is applied for the realization of collimated short-pulse beam fields. The error criterion is imposed within the main beam direction, while outside this region the relative realization error can be large but it is negligible since the field there is small compared to the main beam field.

Go to article

Floquet Wave Diffraction Theory For Tapered Planar Strip Array Green's Function, F. Capolino, F. Mariottini, S. Maci, L. B. Felsen Jan 2002

Floquet Wave Diffraction Theory For Tapered Planar Strip Array Green's Function, F. Capolino, F. Mariottini, S. Maci, L. B. Felsen

Turkish Journal of Electrical Engineering and Computer Sciences

This paper deals with the derivation and physical interpretation of a uniform high frequency representation of the Green's function for a planar phased array of dipoles. The asymptotic representation is based on Floquet wave edge diffraction theory herein extended to accommodate slowly varying tapered amplitude illumination with possible inclusion of dipole amplitudes that tend to zero at the edge. The phased array is assumed to be infinite with uniform amplitude excitation in the z-direction but finite and amplitude-tapered in the x-direction. This geometry permits study of diffraction phenomena occurring at the tapered edge of a rectangular array when the observation …

Go to article

Development Of A Cylindrical Waveguide Antenna Array With A High Isolation Between Receive - Transmit Sub Arrays: Theory And Experiment, Vladimir I. Okhmatovsky, Konstantina S. Nikita, Stavros Koulouridis, Nikolaos K. Uzunoglu Jan 2002

Development Of A Cylindrical Waveguide Antenna Array With A High Isolation Between Receive - Transmit Sub Arrays: Theory And Experiment, Vladimir I. Okhmatovsky, Konstantina S. Nikita, Stavros Koulouridis, Nikolaos K. Uzunoglu

Turkish Journal of Electrical Engineering and Computer Sciences

The possibility of developing an antenna system consisting of transmit and receive arrays and being able to work simultaneously in full duplex mode at the same frequency is a very attractive task. This could only be achieved if the isolation between the transmit and receive arrays is sufficiently high not to cause a parasitic oscillation which will ruin the proper operation of a transponder system to which the arrays will be connected. Specifically, in this paper the operation of two peripheral open waveguide arrays placed on a cylindrical surface and being isolated with a radial line operating as a space …

Go to article

2d Complex Point Source Radiation Problem I. Complex Distances And Complex Angles, E. Gago-Ribas, M. J. Gonzalez Morales Jan 2002

2d Complex Point Source Radiation Problem I. Complex Distances And Complex Angles, E. Gago-Ribas, M. J. Gonzalez Morales

Turkish Journal of Electrical Engineering and Computer Sciences

A methodology based on the complex spaces analysis, which allows to generalize the study of wave radiation and scattering problems is presented in this paper. From the analytic continuation of functions defined in the real domain (real propagation or scattering spaces) into the complex space (space of complex coordinates), general non homogeneous phase field solutions are obtained for a particular wave problem. From these general solutions, other common solutions obtained under different approximations will arise. This procedure allows to obtain a complete classification of the solutions for the wave problem under analysis, and also to study both the ranges of …

Go to article

2d Complex Point Source Radiation Problem Ii.~Complex Beams, M. J. Gonzalez Morales, E. Gago-Ribas Jan 2002

2d Complex Point Source Radiation Problem Ii.~Complex Beams, M. J. Gonzalez Morales, E. Gago-Ribas

Turkish Journal of Electrical Engineering and Computer Sciences

The complex point source analytic continuation, and the analysis into the spaces of complex distances, angles, and other related magnitudes, may be applied to describe a wide variety of 2D wave propagation problems. This step will be essential in order to establish a complete complex methodology which may be applied to obtain general descriptions of more practical problems involving the scattering of waves under some kind of field incidence. A particular application of the methodology presented in Part I will be used in Part II. The specific problem under analysis in these papers will be the general complex beam solution …

Go to article

An Efficient Preconditioner For Iterative Solvers, V. V. S. Prakash, Raj Mittra Jan 2002

An Efficient Preconditioner For Iterative Solvers, V. V. S. Prakash, Raj Mittra

Turkish Journal of Electrical Engineering and Computer Sciences

The method of moments solution of the Maxwell's equations leads to a dense system of complex equations. Direct solution of these equations using LU factorization becomes unwieldy as the size of the scatterer increase in terms of wavelength. Iterative solvers, such as those based on Krylov projection methods, offer an alternative approach for solving large system of equations. Most often, the iterative methods are used in combination with some kind of preconditioning to improve the condition number of the system matrix A in order to acheive accelerated convergence [1-2]. This paper discusses the application of Multi-Frontal Preconditioners (MFPs) for the …

Go to article

An Exact Line Integral Representation Of The Po Radiation Integral From A Flat Perfectly Conducting Surfaces Illuminated By Elementary Electric Or Magnetic Dipoles, Matteo Albani, Stefano Maci Jan 2002

An Exact Line Integral Representation Of The Po Radiation Integral From A Flat Perfectly Conducting Surfaces Illuminated By Elementary Electric Or Magnetic Dipoles, Matteo Albani, Stefano Maci

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a line integral representation for the PO radiation integral from a flat perfectly conducting surface, illuminated by an arbitrary oriented elementary either electric or magnetic dipole, is presented. No restriction is imposed on the position of the source and of the observation point. The main application of this result is the acceleration of the numerical PO integration for electrically large surfaces. The formulation is based on the application of the equivalence principle to a projecting surface which allows the analytical evaluation in closed form of one of the two-fold surface integral which define the radiated field at …

Go to article

Stability Analysis Of A Closed-Loop Control For A Pulse Width Modulated Dc Motor Drive, Fatma Gürbüz, Eyüp Akpinar Jan 2002

Stability Analysis Of A Closed-Loop Control For A Pulse Width Modulated Dc Motor Drive, Fatma Gürbüz, Eyüp Akpinar

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, the effect of the variation of amplitude and the chopping period of a PWM signal on the stability of a closed-loop control for a DC motor drive is investigated. First, the entire system is formulated as a Linear Quadratic (LQ) tracker with output feedback [1]. Then, stability analysis for the varying amplitude and the varying chopping period is carried out by the methods of root locus and the Jury test. Finally, stability limits obtained from a root locus and Jury test are checked by the simulation of the system in MATLAB.

Go to article

Plane Wave Diffraction By A Dielectric Loaded Open Parallel Thick Plate Waveguide, Bahatti̇n Türetken, Ali̇ Alkumru Jan 2002

Plane Wave Diffraction By A Dielectric Loaded Open Parallel Thick Plate Waveguide, Bahatti̇n Türetken, Ali̇ Alkumru

Turkish Journal of Electrical Engineering and Computer Sciences

A uniform asymptotic high-frequency solution for a two-dimensional diffraction problem of plane electromagnetic waves by a dielectric loaded open parallel thick plate waveguide is investigated rigorously using the Fourier transform technique in conjunction with the mode matching method. This mixed method of formulation gives rise to scalar modified Wiener-Hopf equations of the second kind for which the solution contains a set of infinitely many constants satisfying an infinite system of linear algebraic equations. A numerical solution of this system is obtained for various values of plate thickness, incidence angle and permittivity, and the effect of these parameters on the diffraction …

Go to article

Array Pattern Nulling By Phase And Position Perturbations With The Use Of A Modified Tabu Search Algorithm, Ali̇ Akdağli, Keri̇m Güney Jan 2002

Array Pattern Nulling By Phase And Position Perturbations With The Use Of A Modified Tabu Search Algorithm, Ali̇ Akdağli, Keri̇m Güney

Turkish Journal of Electrical Engineering and Computer Sciences

A useful and flexible method based on the tabu search algorithm for the pattern synthesis of linear antenna arrays with the prescribed nulls is presented. Nulling of the pattern is achieved by controlling both the phase and the position of each array element. To show the versatility of the present method, some design specifications such as the maximum sidelobe level and the null depth level are considered by introducing a set of weighting factors in the cost function constructed for the tabu search algorithm. Several illustrative examples of a Chebyshev pattern with the imposed single, multiple and broad nulls are …

Go to article

Active Clamped Zvs Forward Converter With Soft-Switched Synchronous Rectifier, A. Açik, Işik Çadirci Jan 2002

Active Clamped Zvs Forward Converter With Soft-Switched Synchronous Rectifier, A. Açik, Işik Çadirci

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents the analysis, design and implementation of an active-clamped, ZVS forward converter equipped with a soft-switched synchronous rectifier (ACFC-SR) proposed for high-efficiency, low output voltage dc-dc converter applications. The converter efficiency is maximized due to the soft-switching of the main, active clamp, synchronous rectifier and freewheeling MOSFET switches. The operating principles of the ACFC-SR are analyzed in detail and the converter performance is compared with the alternative forward converter schemes employed in low output voltage dc-dc converters. Experimental results are presented for a converter with a dc input voltage of 48 V, an output voltage of 5 V, …

Go to article

Boundary Effects On Multiplication Noise In Thin Heterostructure Avalanche Photodiodes: Theory And Experiment [Al/Sub 0.6/Ga/Sub 0.4/As/Gaas], Majeed M. Hayat, Oh-Hyun Kwon, Shuling Wang, Joe C. Campbell, Bahaa E.A. Saleh, Malvin Carl Teich Jan 2002

Boundary Effects On Multiplication Noise In Thin Heterostructure Avalanche Photodiodes: Theory And Experiment [Al/Sub 0.6/Ga/Sub 0.4/As/Gaas], Majeed M. Hayat, Oh-Hyun Kwon, Shuling Wang, Joe C. Campbell, Bahaa E.A. Saleh, Malvin Carl Teich

Electrical and Computer Engineering Faculty Research and Publications

The history-dependent recurrence theory for multiplication noise in avalanche photodiodes (APDs), developed by Hayat et al., is generalized to include inter-layer boundary effects in heterostructure APDs with multilayer multiplication regions. These boundary effects include the initial energy of injected carriers as well as bandgap-transition effects within a multilayer multiplication region. It is shown that the excess noise factor can be significantly reduced if the avalanche process is initiated with an energetic carrier, in which case the initial energy serves to reduce the initial dead space associated with the injected carrier. An excess noise factor reduction up to 40% below the …

Go to article

First Prev Next Last