Engineering Commons^™

Quantitative Analysis And Synthesis Of The Electrokinetic Mass Transport And Adsorption Mechanisms Of A Charged Adsorbate In Capillary Electrochromatography Systems Employing Charged Adsorbent Particles, B. A. Grimes, Athanasios I. Liapis

Chemical and Biochemical Engineering Faculty Research & Creative Works

The dynamic mathematical model of Grimes and Liapis [J. Colloid Interf. Sci. 234 (2001) 223] for capillary electrochromatography (CEC) systems operated under frontal chromatography conditions is extended to accommodate conditions in CEC systems where a positively charged analyte is introduced into a packed capillary column by a pulse injection (analytical mode of operation) in order to determine quantitatively the electroosmotic velocity, electrostatic potential and concentration profiles of the charged species in the double layer and in the electroneutral core region of the fluid in the interstitial channels for bulk flow in the packed chromatographic column as the adsorbate adsorbs onto …

A Preliminary Comparison Of The Mechanical Properties Of Chemically Cured And Ultrasonically Cured Glass Ionomer Cements, Using Nano-Indentation Techniques, Mark R. Towler, A. J. Bushby, R. W. Billington, R. G. Hill

Chemical and Biochemical Engineering Faculty Research & Creative Works

There is a requirement for a dental cement with properties comparable or superior to conventional glass ionomer cements (GICs) but with the command set properties of the resin modified GICs. The objective of this work was to show that the application of ultrasound to conventional Fuji IX commercial glass ionomer cement imparts a command set, whilst improving the short-term surface mechanical properties. Nano-indentation techniques were employed to highlight the improvements in hardness and creep resistance imparted to the cement through the application of ultrasound. The instant set imparted by the application of ultrasound provides improved surface hardness and creep, particularly …

Neural Networks For Estimating Concrete, Lokman M. Sharara

Archived Theses and Dissertations

No abstract provided.

Simulation Of Oil Spills At Environmentally Sensitive Areas Along Egyptian Coasts, Peter Fayez Nasr

Archived Theses and Dissertations

No abstract provided.

Assessment Of The Recycled Concrete Aggregates Structural Suitability For Road Construction, Abdulla Yousef Ali Al-Ali

Theses

In most aspects of modem life, there is a consensus among practitioners and decision makers of the importance of preserving the environment, and to find alternatives to the scarce natural materials. This can be accomplished by better utilization of the natural materials and/or recycling or reclaiming their waste, specially, if they are of finite resources. The recycled material could be an attractive alternative (both environmentally and economically) if its characteristics are proven to be close to those of the natural material.

Utilizing recycled mineral aggregates in the construction field in general and in highway pavement in specific is somehow governed …

Evaluation Of Some Organic Inhibitors For Stainless Steel Corrosion Using Different Electrochemical And Surface Techniques, Maryam Hassan Saeed Al-Hassan

Theses

Stainless steels have been extensively used in automotive, industrial, electronics, etc., applications. Iron (Fe) and chromium (Cr) are the main elements with weight percentage contribution of 60-75% and 10-25% respectively. Other elements, such as Ni, Co, Mo, Mn, C etc. are also present with variable concentrations. The purpose of this work is to use different electrochemical and surface techniques to study the corrosion behavior of stainless steel type 316 (percent composition of different chemical elements are listed in table 1) in acid media in presence and absence of different thiophene derivatives (list of inhibitors in figure 1). Moreover, other important …

2001 Summary Of Road And Street Inventory Data For Indiana Lpa's For Adams County, In, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

This report provides roadway mileage summary information for each incorporated agency within Adams County as well as statewide summaries of mileage broken down by agency type, roadway functional classification, surface type, and federal-aid system for all local roads and streets within Indiana. The body of this report has been divided into three distinct sections: Reference Reports, Statewide Summary Reports, and County Specific Reports.

In Section l, Reference Reports, the statewide functional classifications, surface types, and federal-aid systems are given in three reports. These three reports serve as an overview of the possible functional classifications, surface types, or federal-aid systems, which …

Effects Of Nox And Α-Fe2o3 On Mercury Transformations In A 7-Kw Coal Combustion System, Kevin C. Galbreath, Christopher J. Zygarlicke, Donald L. Toman, Richard L. Schulz

EERC Publications, Papers, & Presentations

In this investigation, the effects of NO₂ and α-Fe₂O₃ on Hg speciation were evaluated by injecting them into coal combustion flue gases produced from burning bituminous, subbituminous, and lignitic coals in a 7-kW combustion system.

Bs News

Building Services Engineering

No abstract provided.

Human Head-Neck Response To Impact Acceleration: Comparison Of Oblique To Combined Frontal And Lateral Response, Salvadore J. Guccione Jr., Edit J. Kaminsky

Electrical Engineering Faculty Publications

This paper relates human oblique head-neck kinematics to human frontal and lateral head-neck kinematics for three subjects of varying anthropometry. Head-neck kinematic response to indirect impact acceleration for an oblique test is compared to the superposition of the head/neck behavior of appropriate frontal and lateral tests for the same subject. The results have important implications in terms of the complexity required in the design and validation of omni-directional biofidelic crash test manikins and mathematical models of human head-neck response.

The Effect Of Reliability Consideration On The Application Of Quality Index, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

Quality index (QI) has been proposed as a screening mechanism for machine-part matrices in the development of cellular manufacturing systems. In this paper the effect of reliability consideration on the application of QI and the relative sensitivity of job shop and cellular manufacturing systems to reliability changes are evaluated by simulation modeling. Performance measures such as mean flow time and work-in-process inventories are used in the comparative study of job shop and cellular manufacturing.

Characterizing And Calibrating A Large Helmholtz Coil At Low Ac Magnetic Field Levels With Peak Magnitudes Below The Earth's Magnetic Field, Robert A. Schill, Karin V. Hoff

Electrical & Computer Engineering Faculty Research

Characterizing and calibrating a low impedance large Helmholtz coil generating 60 Hz magnetic fields with amplitudes well below the earth’s magnetic field is difficult and imprecise when coil shielding is not available and noise is an issue. Parameters influencing the calibration process such as temperature and coil impedance need to be figured in the calibration process. A simple and reliable calibration technique is developed and used to measure low amplitude fields over a spatial grid using a standard Hall effect probe gaussmeter. These low amplitude fields are typically hard or impossible to detect in the presence of background fields when …

Bi-Decomposition Of Multi-Valued Relations, Alan Mishchenko, Marek Perkowski, Bernd Steinbach

Electrical and Computer Engineering Faculty Publications and Presentations

This presentation discusses an approach to decomposition of multivalued functions and relations into networks of two-input gates implementing multi-valued MIN and MAX operations. The algorithm exploits both the incompleteness of the initial specification and the flexibilities generated in the process of decomposition. Experimental results over a set of multi-valued benchmarks show that this approach outperforms other approaches in the quality of final results and CPU time.

Cooperative Control Of Uav Rendezvous, Timothy W. Mclain, Phillip R. Chandler, Steven Rasmussen, Meir Pachter

Faculty Publications

The cooperative control of timing and synchronization of tasks of multiple unmanned air vehicles (UAVs) represents a valuable capability for a wide range of potential multi-UAV missions. This research addresses the specific problem of cooperative rendezvous in which multiple UAVs are to arrive at their targets simultaneously. The development of a rendezvous manager state machine and a cooperative control decomposition approach are described. Simulation results demonstrating the feasibility of the approach are presented.

Parametric Study Of Heavy Metal Partitioning In A Pilot Scale Incinerator Burning Simulated Municipal Solid Waste, Sukrut S. Thipse

Dissertations

Incineration is a combustion process used to convert toxic waste to benign gases and residue in presence of excess air. The products of the incineration process are bottom ash, fly ash and the flue gas. Most of the metal-based phases formed in incineration are toxic and their emissions need to be strictly controlled. Therefore, behavior of metal species during incineration must be well understood. Such understanding is possible based on the experimental identification of the metal phases formed in the waste combustion and determination of their concentration in various incineration products.

A pilot-scale incinerator of 140,000 Btu/hr capacity was constructed, …

Turbo Space-Time Coded Modulation : Principle And Performance Analysis, Dongzhe Cui

Dissertations

A breakthrough in coding was achieved with the invention of turbo codes. Turbo codes approach Shannon capacity by displaying the properties of long random codes, yet allowing efficient decoding. Coding alone, however, cannot fully address the problem of multipath fading channel. Recent advances in information theory have revolutionized the traditional view of multipath channel as an impairment. New results show that high gains in capacity can be achieved through the use of multiple antennas at the transmitter and the receiver. To take advantage of these new results in information theory, it is necessary to devise methods that allow communication systems …

Low Energy Implantation Of Boron With Decaborane Ions, Maria Angela Albano

Dissertations

The goal of this dissertation was to determine the feasibility of a novel approach to forming ultra shallow p-type junctions (tens of nm.) needed for future generations of Si MOS devices. In the new approach, B dopant atoms are implanted by cluster ions obtained by ionization of decaborane (B₁₀H₁₄)vapor. Each B atom carries only ~9% of the cluster kinetic energy and the B dose per unit charge is 10 times larger than in the case of monomer ion beams. Thus, the problems of spacecharge, limiting the extraction and transport of low energy (< = 1 keV) beams of B⁺ ions, can …

A Conceptual Framework Of Cost/Benefit Justification For Ergonomic Projects To Reduce Musculoskeletal Disorders In The Workplace, Nitipong Boon-Long

Dissertations

A framework for justifying ergonomic projects to the overall cost savings is developed which estimates the extent of musculoskeletal disorders (MSDs) exposures to a specific industry. A cost structure is developed to estimate the investment needed for an ergonomics program and the costs related to MSDs problems including workers' compensation costs, work-related costs, and labor turnover costs. Data was adopted from sources including Bureau of Labor Statistics (BLS), the Healthcare Cost and Utilization Project (HCUP-3), and estimates suggested in OSHA's former Ergonomics Standard. Top fifteen manufacturing industries with the highest MSDs rates were selected to apply the framework. Results showed …

Scheduling Algorithms For High-Speed Switches, Jinhui Li

Dissertations

The virtual output queued (VOQ) switching architecture was adopted for high speed switch implementation owing to its scalability and high throughput. An ideal VOQ algorithm should provide Quality of Service (QoS) with low complexity. However, none of the existing algorithms can meet these requirements.

Several algorithms for VOQ switches are introduced in this dissertation in order to improve upon existing algorithms in terms of implementation or QoS features. Initially, the earliest due date first matching (EDDFM) algorithm, which is stable for both uniform and non-uniform traffic patterns, is proposed. EDDFM has lower probability of cell overdue than other existing maximum …

Fractionation & Segregation Of Suspended Particles Using Acoustic And Flow Fields, Nazhat Aboobaker

Dissertations

The fractionation of particles by size or by density has many applications in a variety of technologies. Decontamination and separation of fine sediments is useful in treating sediments. The application of acoustic standing wave fields for the fractionation and segregation of suspended particles was studied.

The above technology was implemented at the bench scale by building a Plexiglas chamber. Two ultrasound transducers were fixed to opposite sides of the chamber to generate the acoustic standing wave field. The technology was evaluated using silica dioxide (Si02) (1-5 ~tm) and silicon carbide (SiQ (5-20 ~tm) particle suspensions in deionized water. Due to …

2d And 3d Surface Image Processing Algorithms And Their Applications, Jianlin Gao

Dissertations

This doctoral dissertation work aims to develop algorithms for 2D image segmentation application of solar filament disappearance detection, 3D mesh simplification, and 3D image warping in pre-surgery simulation. Filament area detection in solar images is an image segmentation problem. A thresholding and region growing combined method is proposed and applied in this application. Based on the filament area detection results, filament disappearances are reported in real time. The solar images in 1999 are processed with this proposed system and three statistical results of filaments are presented.

3D images can be obtained by passive and active range sensing. An image registration …

An Investigation Of Centrifugal Blood-Cell Separation, Timothy Edward Roche

Dissertations

This dissertation investigated the centrifugal, batch separation of whole blood into subpopulations of red blood cells (erythrocytes) and white blood cells (leukocytes). Separations took place in a custom-built centrifuge (using a seal-less, anti-twisting feed/withdrawal system) containing, a 25-ml capacity separation chamber. The blood separation chamber had dart-shaped geometry in the radial plane and a constant depth in the axial direction. Separation experiments were performed on whole bovine blood at varying hematocrit, centrifuge speed, and batch duration. A small, companion study of whole human blood separation runs also were conducted; they concentrated on batch duration effect and achieved superior separations.

A …

Channel Estimation And Signal Enhancement For Ds-Cdma Systems, Kun Wang

Dissertations

This dissertation focuses on topics of Bayesian-based multiuser detection, space-time (S-T) transceiver design, and S-T channel parameter estimation for direct-sequence code-division multiple-access (DS-CDMA) systems.

Using the Bayesian framework, various linear and simplified nonlinear multiuser detectors are proposed, and their performances are analyzed. The simplified non-linear Bayesian solutions can bridge the performance gap between sub-optimal linear multiuser detectors and the optimum multiuser detector.

To further improve the system capacity and performance, S-T transceiver design approaches with complexity constraint are investigated. Novel S-T receivers of low-complexity that jointly use the temporal code-signature and the spatial signature are proposed. Our solutions, which lead …

An Experimental Study Of Dry Particle Coating : Devices, Operating Parameters And Applications, Michelle Ramlakhan Mohan

Dissertations

Dry particle coating, which mechanically coats fine guest particles onto the surfaces of larger host particles, without binders or solvents, is investigated. Several systems of host and guest particles are coated in different devices to study various aspects of dry particle coating. The devices used are Magnetically Assisted Impaction Coating (MAIC) device, Mechanofusion, and the Hybridizer.

MAIC is used to coat fine SiO₂ guest particles onto the surface of larger cornstarch and cellulose host particles. This is done to simultaneously improve the flowability of the host particles, as well as reduce their hydrophilicity. Dry particle coating is used to …

Modeling, Design And Scheduling Of Computer Integrated Manufacturing And Demanufacturing Systems, Ying Tang

Dissertations

This doctoral dissertation work aims to provide a discrete-event system-based methodology for design, implementation, and operation of flexible and agile manufacturing and demanufacturing systems. After a review of the current academic and industrial activities in these fields, a Virtual Production Lines (VPLs) design methodology is proposed to facilitate a Manufacturing Execution System integrated with a shop floor system. A case study on a back-end semiconductor line is performed to demonstrate that the proposed methodology is effective to increase system throughput and decrease tardiness. An adaptive algorithm is proposed to deal with the machine failure and maintenance. To minimize the environmental …

Transit Productivity Analysis In Heterogeneous Conditions Using Data Envelopment Analysis With An Application To Rail Transit, Manuel J. Martinez

Dissertations

This dissertation extends transit productivity analysis by developing a new method of Data Envelopment Analysis (DEA), the linear programming approach to productivity analysis. The new model analyzes productivity of transit working under heterogeneous operating conditions. It is named Two-Farrell DEA for it applies DEA in two stages, DEA (1), that calculates the productivity frontiers at given operating conditions and DEA (2), that uses inputs adjusted by multipliers calculated in DEA (l). The model Two Farrell DEA calculated productivity benchmarks for each rail transit agency and estimated its potential for higher revenue or lower expense improvement. Additionally, the results identify two …

Joint Source Channel Coding For Progressive Image Transmission, Minyi Zhao

Dissertations

Recent wavelet-based image compression algorithms achieve best ever performances with fully embedded bit streams. However, those embedded bit streams are very sensitive to channel noise and protections from channel coding are necessary. Typical error correcting capability of channel codes varies according to different channel conditions. Thus, separate design leads to performance degradation relative to what could be achieved through joint design. In joint source-channel coding schemes, the choice of source coding parameters may vary over time and channel conditions. In this research, we proposed a general approach for the evaluation of such joint source-channel coding scheme. Instead of using the …

Predicting Thermodynamic And Transport Parameters For Metal Contaminant Sorption To Hydrated Metal Oxides In Aquatic Systems, Paras Trivedi

Dissertations

Hydrated oxides such as HAO,'HFO, goethite, and BA40 are prevalent in soils and sediments as discrete particles or as coatings. These microporous oxides have large surface areas and high affmity for metal ions, and hence they act as both a sink and a source for anthropogenically released metal contaminants. To better understand risks posed by metals in the environment and to develop effective waste management programs, mechanistic models are needed to accurately predict their fate in soils and sediments.

To achieve this objective, sorption of metal ions Sr, Cd, Zn, Ni, and Ca to these oxides were studied with macroscopic …

Novel Multiuser Detection And Multi-Rate Schemes For Multi-Carrier Cdma, Pingping Zong

Dissertations

A large variety of services is [sic] expected for wireless systems, in particular, high data rate services, such as wireless Internet access. Users with different data rates and quality of service (QoS) requirements must be accommodated. A suitable multiple access scheme is key to enabling wireless systems to support both the high data rate and the integrated multiple data rate transmissions with satisfactory performance and flexibility. A multi-carrier code division multiple access (MC-CDMA) scheme is a promising candidate for emerging broadband wireless systems. MC-CDMA is a hybrid of orthogonal frequency division multiplexing (OFDM) and code division multiple access (CDMA). The …

Plasma Induced Damage To Si And Sige Devices And Materials, Wei Zhong

Dissertations

This thesis studied the plasma-induced damage to Si and strained Si_1-xGe_x, and the resulting change in device characteristics. The energetic particles (ions, electrons and photons) in plasma reactor present a potentially hostile environment for processing VLSI devices. An inductively coupled plasma (ICP) reactor was used to study its damage effects to thin gate oxides. Electrical characterizations by C-V, ramped voltage breakdown (RVB) and deep-level transient spectroscopy (DLTS) measurement, and x-ray photoelectron spectroscopy (XPS) analysis were employed to investigate the damages to thin gate oxides and Si/SiO₂ interface. The shift of flat band voltage, the reduction …