Engineering Commons^™

Long Term Risks Associated With Brownfield Containments, Shailesh Shirish Chirputkar

Dissertations

The sites at which the development is hindered by real or perceived contamination are called as Brownfield sites. It is a common trend in industry to develop these types of sites with surface and peripheral containments. It might prove unwise to develop the sites in this manner from a long term perspective without considering the associated risk. Because of this, a model has been proposed for long term risk assessments of brownfield containments.

Objectives of this study were to develop a contaminant transport model for flow of contaminants towards the surface and peripheral containments inside the site, a model for …

Utilization Of Processed Fly Ash In Mortar, Walairat Bumrongjaroen

Dissertations

Grinding process is introduced to provide fine particles of coal fly ash that enhances the strength gain of cement mortars. It is discovered that grinding can make all the studied fly ashes more suitable for concrete use at higher replacement value than previously anticipated even when the effect of high carbon content is considered.

In this study, new mechanisms for strength gain of fly ash mortars are proposed. They are dispersion and nucleation, which are results from the presence of fly ash in the cement mortar. These effects are shown to enhance the hydration of cement. The pozzolanic action of …

A Methodology For Solving The Network Toll Design Problem, Mei Chen

Dissertations

Congestion pricing has been regarded as an efficient method to reduce network-wide travel cost. In this dissertation, a methodology for toll design is developed to provide policy-makers with suggestions on both where to charge tolls and how much the tolls should be. As opposed to the traditional approach of marginal social cost pricing, this methodology is capable of dealing with the more realistic case, in which only a small number of links can be tolled. Furthermore, this methodology is expanded to accommodate multiple user groups.

The toll design problem can be formulated using both deterministic and stochastic route choice models. …

Physical And Geotechnical Characterization Of Water Treatment Plant Residuals, Swamy C. Basim

Dissertations

The study of Water Treatment Plant (WTP) residuals is of recent origin and very little information is available in literature regarding these residuals. These waste materials have high solids contents, even in the mechanically dewatered condition, making it difficult to handle. These, along with stringent environmental regulations have forced the water utilities to look for new disposal options for these residuals. For this purpose as well as for evaluating suitable options for the beneficial reuse of residuals, it is essential to characterize WTP residuals.

As the dewatered residuals are plastic, the researcher may be prompted to treat these materials as …

On Scheduling Input Queued Cell Switches, Shizhao Li

Dissertations

Output-queued switching, though is able to offer high throughput, guaranteed delay and fairness, lacks scalability owing to the speed up problem. Input-queued switching, on the other hand, is scalable, and is thus becoming an attractive alternative. This dissertation presents three approaches toward resolving the major problem encountered in input-queued switching that has prohibited the provision of quality of service guarantees.

First, we proposed a maximum size matching based algorithm, referred to as min-max fair input queueing (MFIQ), which minimizes the additional delay caused by back pressure, and at the same time provides fair service among competing sessions. Like any maximum …

On-Line State And Parameter Estimation In Nonlinear Systems, David A. Haessig

Dissertations

On-line, simultaneous state and parameters estimation in deterministic, nonlinear dynamic systems of known structure is the problem considered. Available methods are few and fall short of user needs in that they are difficult to apply, their applicability is restricted to limited classes of systems, and for some, conditions guaranteeing their convergence don't exist.

The new methods developed herein are placed into two categories: those that involve the use of Riccati equations, and those that do not. Two of the new methods do not use Riccati equations, and each is considered to be a different extension of Friedland' s parameter observer …

Optimization Of Urban Traffic Control Strategies By A Network Design Model, Wu Sun

Dissertations

The efficiency of congested urban transportation networks can be improved by implementing appropriate traffic control strategies, such as signal control timing, turning movement control; implementation of one-way traffic policies, lane distribution controls etc.. In this dissertation, the following strategies are addressed: 1) Intersection left turn addition/deletion, 2) Lane designation,. and 3) Signal optimization.

The analogy between the network design problem (NDP) and the optimization of traffic control strategies motivated the formulation of an urban transportation network design problem (UTNDP) to optimize traffic control strategies. An UTNDP is a typical bi-level programming program, where the lower level problem is a User …

Development Of Computer Model And Expert System For Pneumatic Fracturing Of Geologic Formations, Brian Michael Sielski

Dissertations

The objective of this study was the development of a new computer program called PF-Model to analyze pneumatic fracturing of geologic formations. Pneumatic fracturing is an in situ remediation process that involves injecting high pressure gas into soil or rock matrices to enhance permeability, as well as to introduce liquid and solid amendments. PF-Model has two principal components: (1) Site Screening, which heuristically evaluates sites with regard to process applicability; and (2) System Design, which uses the numerical solution of a coupled algorithm to generate preliminary design parameters.

Designed as an expert system, the Site Screening component is a high …

Fdtd-Based Full Wave Co-Simulation Model For Hybrid Electromagnetic Systems, Tong Li

Dissertations

In high-frequency ranges, the present electronic design automation software has limited capabilities to model electromagnetic (EM) systems where there are strong field effects influencing their characteristics. In this situation, a full-wave simulation tool is desired for the analysis and design of high-speed and non-linear EM systems. It is necessary to explore the interaction between the field and electronic components during a transient process when field effects are more significant. The finite-difference time-domain (FDTD) technique receives growing attention in the area of EM system analysis and simulation due to its simplicity, flexibility and robustness. It is a full-wave simulation method that …

Observers For Discrete-Time Nonlinear Systems, Walter D. Grossman

Dissertations

Observer synthesis for discrete-time nonlinear systems with special applications to parameter estimation is analyzed. Two new types of observers are developed. The first new observer is an adaptation of the Friedland continuous-time parameter estimator to discrete-time systems. The second observer is an adaptation of the continuous-time Gauthier observer to discrete-time systems. By adapting these observers to discrete-time continuous-time parameter estimation problems which were formerly intractable become tractable.

In addition to the two newly developed observers, two observers already described in the literature are analyzed and deficiencies with respect to noise rejection are demonstrated. improved versions of these observers are proposed …

Ultrasound To Decontaminate Organics In Dredged Sediments, Kanya Veerawat

Theses

In this research, it was attempted to decontaminate and separate dredged sediments contaminated with organic compounds by the application of ultrasound energy coupled with sub-atmospheric pressures. The decontamination and separation of contaminated sediments was achieved by integrated two processes. For Process 1, ultrasound energy was used to decontaminate the sandy fraction in dredged sediments, and sub-atmospheric pressure was used to separate and remove fines. For Process 2, ultrasound was again used to decontaminate fines with bulk fluid, and sub-atmospheric pressure was used to remove the contaminants with water. Process 1 was evaluated and found to have four variables contributing to …

Study Of Reactive Media For Chromium Removal From Groundwater By Permeable Barriers, Hemant S. Desai

Theses

The purpose of the study was to select reduction media for application in permeable barriers for removing chromate ions from groundwater emanating from chromium refining sites in New Jersey. The high pH condition of groundwater in such sites is expected to pose limitations on the use of metallic iron (Fe⁰) as the sole reductive medium.

Reasonable reduction kinetics was achieved using iron at pH < 9.2. Several pH lowering media were investigated and were found to have either very slow or very fast dissolution kinetics, which rendered them impractical for use in passive permeable barriers. Two other media, namely: pyrite and siderite minerals have shown promising results, but fell short of achieving the required performance. Detailed investigation of interfacial processes in a batch reactor have shown that the addition of a small amount of a neutral salt can significantly improve chromate reduction kinetics, even at high pH conditions around 10.9.

The formation of passivating layers, which can slowdown the reaction significantly, was found to be important at high pH conditions. It is recommended that an injection system be used with the reactive barrier to …

Development Of Icejet Machining Technology, Dimitri V. Shishkin

Theses

This work was concerned with the application of ice powder for material processing. Material cutting and surface cleaning were also studied. As a result, innovative cleaning and etching technology was pioneered. The corresponding technology was designed and demonstrated.

The study involved investigation of water freezing, crushing of generated ice, ice transportation, formation of ice water and ice air streams and, finally, use of this stream for material cutting and cleaning. The theoretical work included investigation of the phase change in water and ice formation, effect of ice temperature on particles behavior and entrainment of ice particles by the water stream. …

Fundamentals Of Dry Coating In Fluidized Bed, Rakesh Iyer

Theses

This thesis is devoted to the study of a novel dry coating method in fluidized bed - Dry Coating of Particles in Spouted bed (DCPS). The main objectives of this work were to study the feasibility of the process, both quantitatively and qualitatively, and to compare the results with coating by conventional mechanical mixing. Aerosol mechanics is applied to account for the following: 1) collision between the guest and host particles in a spouted bed (analysis of guest-host particle inertial fluid-dynamic interaction), and 2) to show how collision efficiency of guest particles with host particles affects the coating efficiency. An …

Multi-Lifecycle Assessment Design Tools And Software Development, Ji Jin

Theses

This thesis introduces the concept of Multi-lifecycles and a Multi-lifecycle assessment (MLCA) methodology for evaluating the energy consumption and environmental emissions of a product. MLCA quantifies materials, energy, and environmental burdens associated with end-of-life options, as well as obtains the value of returning parts and materials back to use, through demanufacturing, reengineering and remanufacturing.

A Multi-lifecycle Assessment software is developed as a tool to implement MLCA methodologies. By this software, one can practice a full life-cycle analysis on a product, or compare the environmental impacts of different products. Detailed designs on MLCA software including the databases, user interfaces, and algorithm …

Radiative Properties Of Ir Materials, Manish R. Babladi

Theses

The objective of this thesis is to study the radiative properties of materials of interest in the infrared range of wavelengths. In particular, three distinct materials have been considered here - Erbium oxide, alumina and quartz. Erbium oxide has unique selective line emission, which gives a high emittance at a particular wavelength and low emittance in the rest of the infrared spectrum. It has applications in the design and development of thermophotovoltaic (TPV) generators. Because of its selective emission properties, erbium oxide assists in concentrating the radiant energy into a narrow band near the bandgap energy of the TPV cell, …

Assessing The Impact Of Design For Environment Guidelines : A Case Study Of Office Telephones, Hussam Fawzi Al-Okush

Theses

This research addresses a fundamental question: How much of the improvement in a product's environmental performance is directly attributable to the Design for Environment (DFE) tools and guidelines, and how much results simply from other design objectives or enabling technologies? The research examines four generations of a business telephone over the last thirty years, including the current generation, which has been designed using DEE guidelines. A lifecycle assessment (LCA) and demanufacturing analysis were performed on each of the first three generations to determine various technology and non-DEE trends. This information was used to forecast the progression to a 1997 non-DEE …

Design And Engineering Of A Tensile Fabric Structure, Jairo Rios

Theses

Fabric structures are designed in an iterative process between architect and engineer, analysis input and output, and detail and patterning. There are three main steps in designing a fabric structure: shape finding, loading, and patterning/ detailing.

Shapefinding consists of finding the shape of the fabric where the fabric forces are in equilibrium. This type of structure is geometrically nonlinear which require iterative analysis to converge on a unique solution.

The loading of the structure is similar to that of any conventional structures. The departure is in the major effects that suction and ponding have on fabric surfaces.

Usually the details …

Effect Of Postural Tilt On The Autonomic Nervous System In Gulf War Veterans, Shrenik Dagli

Theses

Time-frequency signal representations characterize signals over a joint time-frequency plane. They combine time-domain and frequency-domain analysis to yield a potentially more revealing picture of the temporal localization of a signal spectrum. Time-frequency distributions (TFDS) of signals map a one-dimensional function of time, x (t), into a two-dimensional function of time and frequency, p(t, f). Most TFDs are "time-varying representations' which are similar conceptually to a musical score with time running along one axis and frequency along the other axis.

Many Gulf War Veterans complained of symptoms like unexplainable tiredness. This condition is known as the Gulf War Syndrome. The purpose …

Vibration Control Of Ultra-High Precision Magnetic Leadscrew Using Recurrent Neural Network, Bhaskar Vinayak Dani

Theses

Ultra-high precision positioning is of strategic importance to modern industrial processes such as semiconductor manufacturing. Traditional drives with mechanical transmission elements exhibit nonlinearities such as friction, backlash and hysteresis which limit the system performance significantly. The magnetic leadscrew in this work belongs to the class of contactless drives which overcome the above mentioned limitations of contact-type drives. The operation is based on leadscrew/nut coupling but unlike mechanical Ieadscrews, the threads of the nut and the leadscrew are aligned magnetically and do not come in contact. Thus, "hard" nonlinearities are substantially reduced resulting in high precision and high resolution.

The dynamics …

A Signal Conditioning Approach For The Extraction Of The Oscillatory Petential From The Electroretinogram, Peter Haines Derr

Theses

The oscillatory potential (OP), a signal component of the electroretinogram (ERG), was investigated to determine correlation of the OP and pathological conditions of the inner retina. Large transients characterize the ERG. Such transients stimulate a filter's natural response. Since these responses can co-occur with the OP, a distorted OP will be extracted. A proposed signal windowing and padding technique for conditioning the ERG signal has been implemented for the extraction of a ntnimally distorted OP.

Windowing is used to capture only the OP period. The windowed ERG signal is then signal conditioned to generate initial values for the filter's state …

Development Of An Ion Source For Implantation Of Decaborane, Ravidath Gurudath

Theses

Future generations of Si technology will require ultra shallow junctions (tens of nm) in the drain and source regions of MOS transistors. Fabrication of such shallow p-type junctions requires implantation of boron at ultra low energies (≡1keV), below the limits of standard ion implantation technology. A proposed solution involves implantation of B₁₀H_X⁺ ions in which boron atoms carry less than 10% of the beam energy. Thus shallow implantation may be possible with standard ion implanters operating at tens of kV.

This thesis is a part of the feasibility study of this novel technology. The ionization of …

Production Of Submicron Aerosols By Powder Depressurization, Amit Haryani

Theses

Disaggregation of dry powders in shear flow has limitations in producing submicron particles. This study explores a new method for the production of submicron particles by the depressurization of powder aerosols. The depressurization mechanism is based on the rapid depressurization of the aggregated powder through a specially designed nozzle. As the pressure suddenly decreases from very high values inside the aggregates (800 psi) to ambient at the surface of such aggregates, disaggregation takes place due to the force exerted by the gas escaping through their pore structure.

he effect of various process parameters, namely: nozzle diameter, pressure and pretreatment with …

Thermodynamic And Kinetic Analysis On Cl.+Rci -- Cl2+R.Reactions, Ch3cjo+O2= Products And Cjcho+O2= Products, Jongwoo Lee

Theses

Thermodynamic Parameters, ΔH°_f(298), S°₍₂₉₈₎ and Cp(T) are evaluated for C₁ and C₂ chlorocarbon molecules and radicals. These thermodynamic properties are used in evaluation and comparison of R.+ Cl₂ => R-Cl + Cl. (defined forward direction) reaction rate constants from the kinetics literature. Data from some 20 reactions in the literature show linearity on a plot of Ea_fwd vs. ΔH_rxn,fwd, yielding a slope of (0.38 ± 0.04) and intercept of (10.10 ± 0.77) kcal/mole. Thermodynamic properties (ΔH°₍₂₉₈₎, S°₍₂₉₈₎ and Cp(T) from 300 to 1500 K) for reactants, adducts, transition …

Dual Frequency Bi-Othogonally Polarized Antennas For Gps Applications, Anand Arun Mahale

Theses

Dual frequency bi-orthogonally polarized antenna to be used in Global Positioning System applications operating in Li (1575.42 ± 10.23 MHz) and L2 (1227.60 ± 10.23 MHz) Bands has been studied. To ensure compatibility with existing applications, the antenna size is limited in dimensions to 4.120" x 4.680" x 1.250" including the radome. Orthogonally placed two dual frequency probe excited patches were designed using a high dielectric constant substrate (ε r = 9.8 and thickness of 250 mils, Rogers TMM10i material) to obtain vertical and horizontal polarization for each band. The measured performance of this antenna showed good agreement with the …

Design Of Components For A Generic Microprocessor Architecture, Pradnesh R. Mohare

Theses

The objective of this thesis was to develop a generic microprocessor design that can be adapted to many of the existing 16 bit microprocessors. Common features of various microprocessors were used to develop the design of many generic components which can then be used to design the required microprocessors instead of custom-designing each one of them separately. The components were designed using a CISC based micro-programmed design approach as that was more suitable in terms of design and verification time for generic implementation. The generic parts designed include the Register File for temporary data storage, the Effective Address Calculator that …

Handoff Effect On Prma (Packet Reservation Multiple Access) In Micro-Cellular System, Dongsuk Park

Theses

PRMA(Packet Reservation Multiple Access) has been proposed for third generation wireless information network by Goodman et al. [5] [4]. Due to small micro cell radius mobile initiated handoff has been proposed to disperse the burden of BS(Base Station) [14]. Even though these frequent handoffs will not burden on BS, increased contends due to handoff will affect the over all performance of PRMA.

In this paper, we analyze the handoff effect on PRMA performance under micro-cellular system. Steady state speech terminal model with handoff is proposed.. Stabilities are derived based on proposed steady state terminal model[F(c_s)=M] and also increased …

In Situ Aortic Root In Vitro Testing Of The Stented And Stenless Porcine Aortic Heart Valves, Sean Parker

Theses

Background - The stent, Delrin® support frame, for porcine heart valves has been blamed for reduced durability of these valves due to the additional stress caused by the relative stiffness of the stent. There is a tendency among surgeons to do away with the stent in the aortic position and use porcine stentless valves which are sewn directly in the aortic position after removing diseased valve. These stentless valves are extremely difficult to test and no appropriate holder has been designed for this purpose. New approach for in vitro testing of these valves has been developed at Sheihigh, Inc., Millburn …

Analysis And Modeling Of Ultrasound To Decontaminate Heavy Metals In Dredged Sediments, Ruvini Perera

Theses

Sediments contaminated with heavy metals due to past disposal practices threatens the environment and requires remediation. This research is an attempt to develop a technology to decontaminate heavy metals in the dredged sediments with an integrated set of processes using ultrasound. Acoustic cavitation caused by ultrasound energy can be used to remove chromium from the sediments. Two coupled processes were used to treat both coarse (Process#1) and fine (Process#2) fractions of the sediments. Full factorial experimental designs were carried out to evaluate the treatment technique and to statistically model and optimize the processes. The model for Process#1 had four contributing …

Development Of A Context-Specific Search Engine, An Executive Information System, And A Novel Www Ready External Cost Model, Amit V. Revankar

Theses

NJPIES is associated with Information Ecology and Sustainability, a holistic approach to environmental data collection, compilation, integration and provision that puts people, not technology, at the center of the environmental information world.

The first main goal of this project was to develop an algorithm and associated computer-based tool that could perform a lifecycle cost analysis for a model system. The application developed solved the primary problem associated with the lifecycle cost analysis of a product: it accounted for all costs (e.g., environmental costs such as ecological costs and health costs associated with emissions) of the activity. A lifecycle cost analysis …