Engineering Commons^™

Bioactivities Of A Tumour Necrosis Like Factor Released By Chicken Rnacrophages, Silke Rautenschlein, Anuradha Subramanian, Jagdev M. Sharma

Papers in Biotechnology

To test for tumour necrosis-like factor (TNF) of chickens, supernatants of a lipopolysaccharide (LPS)-stimulated chicken macrophage cell line MQ-NCSU were analysed. A sequence of ion-exchange and gel-permeation chromatography was utilised to isolate TNF-like activity from the culture supernatant. The peak of TNF-like cytotoxic activity corresponded to the fractions with a nlolecular weight of 81 kDa or higher. Polyclonal anti-human TNF-a antiserum cross-reacted by Western blotting with a 17 kDa protein in the TNF-containing fraction ~ ~ n d e denaturing conditions. This result indicated that chicken TNF-like factor in the biologically active form may be a protein multimer of monomers …

Bioactivities Of A Tumour Necrosis Like Factor Released By Chicken Macrophages, Silke Rautenschlein, Anuradha Subramanian, Jagdev M. Sharma

Papers in Biotechnology

To test for tumour necrosis-like factor (TNF) of chickens, supernatants of a lipopolysaccharide (LPS)-stimulated chicken macrophage cell line MQ-NCSU were analysed. A sequence of ion-exchange and gel-permeation chromatography was utilised to isolate TNF-like activity from the culture supernatant. The peak of TNF-like cytotoxic activity corresponded to the fractions with a nlolecular weight of 81 kDa or higher. Polyclonal anti-human TNF-a antiserum cross-reacted by Western blotting with a 17 kDa protein in the TNF-containing fraction ~ ~ n d e denaturing conditions. This result indicated that chicken TNF-like factor in the biologically active form may be a protein multimer of monomers …

Composite Comprising A Metal Substrate And A Corrosion Protecting Layer, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Funded Proposals

A composite comprising a metal substrate and as a corrosion protecting layer on at least one major surface of said substrate, a composition comprising a thermoset or thermoplastic polymeric matrix, and a conductive filler component, where said filler component comprises electrically conductive particles.

Genetic Transformation And Regeneration Of Plants, Vincent Lee C. Chiang, Chung-Jui Tsai, Gopi K. Podila

Michigan Tech Patents

An Agrobacterium-mediated transformation and regeneration method for plants including a transformation method to produce transgenic plants with an altered lignin composition.

An Efficient Finite Difference Time Domain (Fdtd) Technique For Modeling A Reflector Antenna System With Partial Circular Symmetry, Dean Arakaki, Wenhua Yu, Raj Mittra

Electrical Engineering

This paper presents an efficient method for solving a large body scattering problem, viz., a paraboloidal reflector antenna system with only partial circular symmetry. The asymmetry in the system is introduced by two factors, viz., the microstrip feed and an inhomogeneous radome. The paper presents a novel approach, based on the reciprocity principle and the “equivalent aperture” theory, to handle the asymmetry problem and still take advantage of the circular symmetry of the large paraboloid of revolution to render the problem manageable

Design And Performance Characterization Of Simultaneous Reflectance And Surface-Mapping Laser Scanner For Application In Underwater Inspection, Frank M. Caimi, Donna M. Kocak, Coy Colquitt

Electrical Engineering and Computer Science Faculty Publications

Considerable advancements have been made in undersea imaging over the past decade enabling long-range detection and observation of underwater objects in clear and turbid (cloudy) water. The image transfer characteristics of the medium (i.e. scattering and absorption) have been primary obstacles in developing high performance systems. However, the application of lasers to the imaging formation process is currently providing a means for acquiring long-range images, over 5-6 attenuation lengths in comparison to 1 -2 attenuation lengths for more conventional methods. In addition, laser technology is now offering the promise of systems capable of forming range maps and depth resolved images. …

A Translation And Rotation Independent Fingerprint Identification Approach, Hongyu Wang

Graduate Theses - Electrical and Computer Engineering

This thesis describes a new approach for fingerprint identification that will be shift and rotation independent. Detailed descriptions of directional filtering, foreground and background segmentation, feature extraction, and matching based on structural correlation are the main topics of this thesis. The fingerprint identification system consists of image preprocessing, feature extraction, and matching which run on a PC platform. The preprocessing step includes histogram equalization, block-based directional filtering, thinning, and adaptive thresholding to enhance the original images for successful feature extraction. The features extracted will be stored in the database for matching. The matching algorithm presented is a modification and improvement …

Particle Pressure And Marginal Stability Limits For A Homogeneous Monodisperse Gas-Fluidized Bed: Kinetic Theory And Numerical Simulations, Ashok S. Sangani, Donald L. Koch

Biomedical and Chemical Engineering - All Scholarship

A linear stability analysis is performed for the homogeneous state of a monodisperse gas-fluidized bed of spherical particles undergoing hydrodynamic interactions and solid-body collisions at small particle Reynolds number and finite Stokes number. A prerequisite for the stability analysis is the determination of the particle velocity variance which controls the particle-phase pressure. In the absence of an imposed shear, this velocity variance arises solely due to the hydrodynamic interactions among the particles. Since the uniform state of these suspensions is unstable over a wide range of values of particle volume fraction &phgr; and Stokes number St, full dynamic simulations cannot …

Guest Editorial: Special Section On Acousto-Optic Devices And Optical Information Processing: Research And Developments, Partha P. Banerjee, Ting-Chung Poon

Electrical and Computer Engineering Faculty Publications

This guest editorial provides an overview of the topical area and an introduction to the articles featured in the special section.

Design Of Cfs Members And Connections For Cyclic Loading, Wei-Wen Yu, Roger A. Laboube

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Design Of Cold-Formed Steel Structural Members And Connections For Cyclic Loading (Fatigue), Roger A. Laboube, Wei-Wen Yu

CCFSS Library (1939 - present)

PREFACE Fatigue in a structural steel member or connection is the process of initiation and subsequent growth of a crack under the action of a cyclic or repetitive load. The fatigue process commonly occurs at a stress level less than the static failure condition. Although fatigue design guidelines have existed for hot-rolled steel structural members and connection, there have been no generally accepted design guidelines in the AISI Specification for addressing fatigue in a cold-formed steel member or connection. Therefore, the intent of the research reported herein was to develop general design rules for design of cold-formed steel members and …

Closure To Period Formulas For Concrete Shear Wall Buildings, Anil K. Chopra, Rakesh K. Goel

Civil and Environmental Engineering

No abstract provided.

Assessment And Modeling Of Stream Mitigation Procedures, Bobby W. Meade, Bernadette Dupont, Sudhir Palle, Theodore Hopwood Ii

Kentucky Transportation Center Research Report

This study evaluates the construction and performance of KyDOH stream disturbance mitigation projects. The initial study tasks were to conduct a literature search, review of stream performance models, a review of Kentucky's and other agency's regulations pertaining to stream mitigation, identification of representative stream mitigation projects, and evaluation of those sites. Th results of this study will produce a tool for evaluating stream mitigation projects after they are constructed.

Experimental Maintenance Painting By Overcoating On The I-64, I-71 And Ky-22 Bridges, Theodore Hopwood Ii, Bobby W. Meade

Kentucky Transportation Center Research Report

In 1995, KYTC let three experimental maintenance-painting projects. Two of those projects involved the painting of multiple bridges along interstate routes. Those projects encompassed four mainline steel bridges on 1-64 in Franklin County, 16 mainline and overpass steel bridges along 1-71 in six counties, and 660 steel rockers on 36 concrete bridges on 1-71. The steel projects included mainline deck girder structures on the 1-64 project and a mix of mainline and overpass deck girder structures and steel bearings on concrete bridges in the 1-71 project. The third project entailed the painting of a single steel truss bridge, KY -22 …

A Blind Deconvolution Approach For Resolution Enhancement Of Near-Field Microwave Images, Ali Mohammad-Djafari, Nasser N. Qaddoumi, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper we propose a blind deconvolution method to enhance the resolution of images obtained by near-field microwave nondestructive techniques using an open ended rectangular waveguide probe. In fact, we model such images to be the result of a convolution of the real input images with a point spread function (PSF). This PSF depends mainly on the dimensions of the waveguide, the operating frequency, the nature of the object under test and standoff distance between the waveguide and the object. Unfortunately, it is very difficult to model this PSF from the physical data. For this reason, we consider the …

Gap Analysis On The Product And Organization Levels For Benchmarking Industrial Enterprises, Hany Mohie El Din Awadain

Archived Theses and Dissertations

No abstract provided.

Impulse, Robin Eh. Bagley, Rod Thormodsgaard, Lisa Umiker

Impulse (Jerome J. Lohr College of Engineering Publication)

Features:
[Page 2] Undergraduate research: a unique opportunity
[Page 3] Brown lectures in Japan
[Page 4] Galipeau named Researcher of the Year
[Page 5] Come-home companies
College:
[Page 6] Sander bids farewell to College
[Page 7] Sander named South Dakota Engineer of the Year
[Page 8] Three faculty members retire
[Page 9] Distinguished Engineers honored at banquet
[Page 10] Engineering Resource Center provides outreach services
[Page 11] Company developing Crothers bid criteria
Faculty:
[Page 12] Entrepreneur of Year enjoys phonathon work
[Page 13] Burckhard conducts practical research
[Page 14] SDSU to have fir t astronomical research facility in the state …

Designed Reduction Of Radiated Noise Characteristics From Two-Bladed General Aviation Propellers, Chandra K. Stich

Master's Theses - Daytona Beach

In recent years increased public awareness has made the reduction of environmental noise pollution a top priority for the aviation industry. Utilizing current technology, this study examines the reduction of noise generated by two bladed general aviation propellers, through design. The Aircraft Noise Prediction Program - Propeller Analysis System (ANOPP-PAS) is used to predict the noise and performance characteristics for an industry typical reference propeller as well as for the final quiet and efficient design.

This investigation is based on the use of a 200 hp engine rotating a 76 inch propeller. Typically, such a propeller would be rotated at …

Acuta Enews July 1999, Vol.28, No. 7

ACUTA Newsletters

In This Issue

New Board for 1999-2000

ACUTA EVENTS

Fall Seminars Focus on Customer Service & New Technologies

DC Update

Legislative & Regulatory Alert

They Answered Our Call

Board Report

Welcome New Members

Positions Available

Fluid Dynamic Parameters In Bubble Columns With Internals, Jinwen Chen, Fan Li, Sujatha Degaleesan, Puneet Gupta, Muthanna H. Al-Dahhan, Milorad P. Duduković, Bernard A. Toseland

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Knowledge of Gas Holdup, Liquid Recirculation and Turbulent Parameters is Important for Design and Performance Calculation of Bubble Column Reactors. Although Numerous Experimental Studies Have Been Reported on This Subject, Most Are Point Measurements Limited to Columns Without Internals Operated at Low Gas Velocities. in This Study, We Present the Results Obtained for the Gas Holdup Profiles, Time-Averaged Liquid Velocity Profiles, Turbulent Stresses and Eddy Diffusivities (Radial and Axial) Obtained in a 18″ (44 Cm) Diameter Column Without and with Internals Similar to Those Used in Industrial Scale Units (E.g., Heat Exchanger Tubes) using Both Air/water and Air/drakeoil 10 …

Two-Phase Flow Distribution In 2d Trickle-Bed Reactors, Y. Jiang, M. R. Khadilkar, M. (Muthanna) H. Al-Dahhan, M. P. Dudukovic

Chemical and Biochemical Engineering Faculty Research & Creative Works

An Extended Discrete Cell Model (DCM), based on Minimization of Energy Dissipation Rate, is Applied to Predict Two-Phase Flow Distribution in the Two-Dimensional Trickle-Bed Reactors. the Main Advantages of DCM Are that It Can Qualitatively Capture the Experimental Observations, and Readily Distinguish between Flow Distribution in Prewetted and Non-Prewetted Beds, as Well as Reflect the Effects of Bed Structure and Inlet Liquid Distributor on Two Phase Flow Distribution. for Comparison Purpose, the Results of Liquid Distribution Obtained by DCM Are Compared with Both Computational Fluid Dynamics (CFD) Simulations and Experimental Observations in a 2D Bed. the Achieved Qualitative and Quantitative …

Comparative Hydrodynamics Study In A Bubble Column Using Computer-Automated Radioactive Particle Tracking (Carpt)/Computed Tomography (Ct) And Particle Image Velocimetry (Piv), Jinwen Chen, Abdenour Kemoun, Muthanna H. Al-Dahhan, Milorad P. Duduković, D. J. Lee, Liang Shih Fan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Hydrodynamics of a 10-Cm-Diameter Cylindrical Bubble Column at the Superficial Gas Velocity of 2, 4, and 8 Cm/s Are Investigated by Computer-Automated Radioactive Particle Tracking (CARPT), Particle Image Velocimetry (PIV), and Computed Tomography (CT). These Experimental Techniques Are Capable of Providing the Knowledge of Velocity and Holdup Fields in a Bubble Column System, Which Are Essential as the Experimental Benchmark for Modeling of Such Systems. the Flow Field of Liquid Phase, as Well as the Reynolds Stresses, Obtained by CARPT and PIV in an Air-Water System Are Compared in Detail. the Results Indicate that CARPT and PIV Complement Each …

Parametric Study Of Unsteady-State Flow Modulation In Trickle-Bed Reactors, M. R. Khadilkar, M. (Muthanna) H. Al-Dahhan, M. P. Duduković

Chemical and Biochemical Engineering Faculty Research & Creative Works

Unsteady-State Liquid Flow Modulation (Periodic Operation) Was Investigated for Hydrogenation of Alpha-Methylstyrene to Cumene in a Hexane Solvent over 0.5% Pd on Alumina Spheres. This Test Reaction Was Run under Both Gas and Liquid Reactant-Limited Conditions. It is Shown that Periodic Liquid Flow Modulation Can Alter the Supply of Liquid and Gaseous Reactants to the Catalyst and Result in Reactor Performance Different from that Obtained under Steady-State Conditions. the Effect of Key Parameters Such as Extent of Gas/liquid Limitation, Total Cycle Period, Cycle Split, and Liquid Mass Velocity Were Investigated Experimentally to Demonstrate the Cause-Effect Relationships in Periodic Operation. Performance …

Laser Beam Profile Deformation Effect During Bragg Acousto-Optic Interaction: A Non-Paraxial Approximation, Ray S. Huang, Chen-Wen Tarn, Partha P. Banerjee, Doungchin Cao

Electrical and Computer Engineering Faculty Publications

It is commonly known that the spatial profiles of the diffracted light beams during Bragg acousto-optic interaction are distorted due to the Bragg angle selection mechanism. All the conventional studies on this effect use the paraxial approximation. But this approximation should be amended when the incident angle of the light is large enough that the diffracted light waves do not propagate closely along the optic axis of the acousto-optic diffraction system. By using a spatial Fourier transform approach, we rigorously study the light beam profile deformation effect of the diffracted light during the Bragg acousto-optic interaction beyond the paraxial approximation. …

Examination Of Beam Propagation In Misaligned Holographic Gratings And Comparison With The Acousto-Optic Transfer Function Model For Profiled Beams, Monish Ranjan Chatterjee, David D. Reagan

Electrical and Computer Engineering Faculty Publications

A transfer function formalism developed earlier for the propagation of profiled optical beams through acousto-optic Bragg cells is revisited and applied to a thick holographic grating. The results based on the holographic coupled wave model and the acousto-optic multiple scattering model are shown to be compatible, and equivalent parameters such as the Q and grating strength are defined for the two systems. Results for a Gaussian spatial profile are numerically computed and compared. For the holographic grating, a profiled beam may be interpreted as an angular misalignment or Bragg-angle mismatch problem. The case of Bragg-wavelength mismatch is also investigated for …

Manufactured Gas In California, 1852-1940: Basis For Remedial Action, Allen W. Hatheway

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

California was a relatively late entry (1852) in the manufactured gas industry. However, its gas entrepreneurs showed considerable invention and enterprise in establishing more than 250 separate gas plants, this in a total geographic environment approximating a whole nation of separate-operating and now environmentally endangering, conditions. Virtually all of the many gas generation processes and patent variations were employed in the state, and a wide variety of geologic conditions have created an even wider variety of fate and transport conditions related to their far and other residuals. A complex development of holding companies and other management forms also need interpretation …

Exploring Participation Processes For Technology Development: Case Studies Of Biotechnology Research And Development Projects In Thailand, Omjai Yuktavetya

Engineering Management & Systems Engineering Theses & Dissertations

There is increased awareness in the organizational and management literature that participation can make contributions in technology development. One of the problems in developing biotechnology in Thailand is that only a small portion of publicly funded research and development projects directly result in commercial success. Among the reasons cited (TDRI 1992a) is a lack of collaboration between various stakeholders; therefore, an effective technology policy to support their participation is needed. This research explores current participation processes in biotechnology research and development projects in Thailand in which there were different perspectives among various stakeholders. The quantitative and qualitative methodologies developed here …

Field Enhancement In Silicon Nanotip Field Emitter Arrays, Ajith Varghese

Electrical & Computer Engineering Theses & Dissertations

No abstract.

Dynamic And Interactive 3d Simulation Over The World Wide Web, Rajesh Vennam

Electrical & Computer Engineering Theses & Dissertations

The thesis presents the development of a new and novel three-dimensional simulation tool over the WWW using Virtual Reality Modeling Language (VRML). VRML is a 3D analog to HTML and serves as a simple, multiplatform language for publishing 3D Web pages. In general, most people use VRML for developing three-dimensional models or worlds that provide little or no interaction for the users. This tool combines interaction and dynamic object creation. A thorough study of VRML is done to explore the features of VRML that could be combined to develop methodologies for creation of dynamic and interactive 3D objects over the …

Ls-Dyna3d Modeling And Simulation For Uncontained Engine Debris Impact On Fuselage Skins, Robin Eileen Lawson

Mechanical & Aerospace Engineering Theses & Dissertations

Impact and penetration events for uncontained engine debris on fuselage skins are simulated using the LS-DYNA3D finite element analysis code. The LS-DYNA3D code is a nonlinear transient dynamic simulation tool with contact algorithms for impact. A finite element analysis is used to simulate the penetration of aluminum plates impacted by titanium impactors on aircraft-like skin panels. By gaining a more comprehensive understanding of this dynamic impact event, this work is meant to contribute to improving designs for damage tolerance and residual strength by providing modeling and analysis guidelines for the analyst.

Parametric studies are performed to determine the influence of …