Engineering Commons^™

Investigation Of Biogas Burner Optimum Operating Conditions With Respect To Nox And Combustion Efficiency, Michel Samir Sadek Farag

Archived Theses and Dissertations

The formation of pollutants emissions in any fuel combustion process is always depending on various factors, such as the fuel c01nposition, the air to fuel ratio, and combustion system aerodynamics. This work investigates the pollutants formation during the combustion of commercial n1ethane with the presence of CO2 as a diluent in varying proportions. Carbon dioxide could be found with methane in some natural gases, in biogas produced through the fermentation of organic waste, in landfills, etc. The work discusses how such presence with variable burner aerodynamics as combustion air split, and secondary combustion air swirl 1nodify significantly the thermodynamics and …

Impact Of Flow Control Structures On River's [Sic] Self Assimilative Capacity, Dahlia Mohamed Eid

Archived Theses and Dissertations

The assessment of environmental impacts associated with existing and new water-level and flow control structures is becoming increasingly important these days. This study investigates the effect of water level control structures on the self-assimilative capacity of a river as well as other environmental impacts like the effect on fish habitat. A computer assisted model is developed to predict the change in the waste loading capacity of the river as well as its water quality, taking the dissolved oxygen as the main criteria, as a result of the change in its hydrologic and hydraulic regime. The model comprises four modules: (I) …

Incommensurate Magnetic Fluctuations In Yba₂Cu₃O₆.₆, Pengcheng Dai, Herbert A. Mook, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

We use inelastic neutron scattering to demonstrate that the low-frequency magnetic fluctuations in YBa₂Cu₃O_6.6 (T_c = 62.7 K) change from commensurate to incommensurate on cooling with the incommensurability first appearing at temperatures above T_c. For the energies studied, the susceptibility at incommensurate positions increases on cooling below T_c, accompanied by a suppression of the spin fluctuations at the commensurate points. These results suggest that incommensurate spin fluctuations may be a common feature for all cuprate superconductors.

Neural Network Based Optimizing Controllers For Smart Structural Systems, Rajendra Damle, Vittal S. Rao

Electrical and Computer Engineering Faculty Research & Creative Works

Neural network-based controllers for vibration suppression of smart structural systems have been reported in several recent studies. These studies have shown that in addition to conventional controller design methodologies, neural networks offer an effective basis for design and implementation of controllers. With the introduction of neural network chips like the electronically trainable analog neural network (ETANN) chip i80170NX by Intel and the Ni1000 chip by Nestor Corp., stand-alone hardware implementation of neural network-based controllers is possible. In this paper the capabilities of Intel's ETANN chip to implement linear and nonlinear controllers for smart structural systems have been investigated. A neural …

A Study Of Piezoelectric Orthorhombic Ta2O5, B. R. Jooste, Hendrik J. Viljoen

Hendrik J. Viljoen Publications

In 1985 it was first reported that monoclinic Ta₂O₅ has piezoelectric properties comparable to ZnO. In this work we report on the deposition, characterization, and qualitative assessment of the piezoelectric behavior of orthorhombic Ta₂O₅. Reactive magnetron sputtering was used to deposit thin films of Ta₂O₅ onto substrates of 316L stainless steel. Without substrate heating the crystallinity was poor. A rapid thermal anneal improved the crystallinity. The orthorhombic phase was dominantly present on all substrates. The piezoelectric property was qualitatively assessed, including a high temperature test at 650 °C.

Optimum Preventive Maintenance Policies For The Amraam Missile, Scott J. Ruflin

Theses and Dissertations

The overall objective of this research effort was to formulate a preventive maintenance strategy for AMRAAM missiles subject to extended captive carry flight time. A preventive maintenance policy is only applicable if the item in question is aging, or deteriorating with time. Therefore, a supporting objective of this research is to characterize the aging process of the missile system through a non-parametric analysis of its Mean Residual Life (MRL) function. Three non-parametric, censored-data MRL function estimation techniques discussed in the literature are examined via a numerical example. All three estimation techniques provide MRL functions that exhibit greatly exaggerated decreasing trends …

Determination Of Bumper Styling And Engineering Parameters To Reduce Pedestrian Leg Injuries, Peter J. Schuster, Bradley Staines

Mechanical Engineering

The European Commission is proposing legislation aimed at reducing the severity of injuries sustained by pedestrians in the event of an impact with the front-end of a motor vehicle. One aspect of this proposed legislation is reducing the pedestrian's leg injuries due to contact with the bumper and frontal surfaces of a vehicle, assessed using a 'pedestrian leg impact device,' or 'leg-form.'

This proposed legislation presents the challenge of designing a bumper system which achieves the required performance in the leg-form impact-without sacrificing the bumper's primary function of vehicle protection during low-speed impacts. The first step in meeting this challenge …

Pulmonary Disposition Of Lipophilic Amine Compounds In The Isolated Perfused Rabbit Lung, Said H. Audi, Christopher A. Dawson, John H. Linehan, Gary S. Krenz, S. B. Ahlf, David L. Roerig

Biomedical Engineering Faculty Research and Publications

We measured the pulmonary venous concentration vs. time curves for [³H]alfentanil, [¹⁴C]lidocaine, and [³H]codeine after the bolus injection of each of these lipophilic amine compounds (LAC) and a vascular-reference indicator (fluorescein isothiocyanate-dextran) into the pulmonary artery of isolated perfused rabbit lungs. A range of flows and perfusate albumin concentrations was studied. To evaluate the information content of the data, we developed a kinetic model describing the pulmonary disposition of these LAC that was based on indicator dilution theory, and we sought a robust approach for interpreting the estimated model parameters. We found that the …

Microengineered Sensor Devices With Field Emission Electron Sources, Chao Sun

Dissertations

This dissertation describes the design, simulation, fabrication, and characterization of a microengineered pressure sensor device and a microengineered mass spectrometer device, both of which use field emission cathode tip arrays as electron sources. VLSI and MEMS process techniques are used to scale down the dimensions from existing vacuum pressure sensors and mass spectrometers.

The microengineered pressure sensor device is fabricated on a silicon substrate approximately 1cm by 1cm. It consists of an electron source in the form of cathode tip array structure, an electron accelerating space which includes a gas ionization volume, and an ion collection electrode. The electrons emitted …

Performance Analysis Of The Interference Adaptation Dynamic Channel Allocation Technique In Wireless Communication Networks, Ziqiang Xu

Dissertations

Dynamic channel allocation (DCA) problem is one of the major research topics in the wireless networking area. The purpose of this technique is to relieve the contradiction between the increasing traffic load in wireless networks and the limited bandwidth resource across the air interface. The challenge of this problem comes from the following facts: a) even the basic DCA problem is shown to be NP-complete (none polynomial complete); b) the size of the state space of the problem is very large; and c) any practical DCA algorithm should run in real-time.

Many heuristic DCA schemes have been proposed in the …

Orthogonal Transmultiplexers : Extensions To Digital Subscriber Line (Dsl) Communications, Xueming Lin

Dissertations

An orthogonal transmultiplexer which unifies multirate filter bank theory and communications theory is investigated in this dissertation. Various extensions of the orthogonal transmultiplexer techniques have been made for digital subscriber line communication applications.

It is shown that the theoretical performance bounds of single carrier modulation based transceivers and multicarrier modulation based transceivers are the same under the same operational conditions. Single carrier based transceiver systems such as Quadrature Amplitude Modulation (QAM) and Carrierless Amplitude and Phase (CAP) modulation scheme, multicarrier based transceiver systems such as Orthogonal Frequency Division Multiplexing (OFDM) or Discrete Multi Tone (DMT) and Discrete Subband (Wavelet) Multicarrier …

Enhanced Terahertz Pulse Generation And Detection Using Electric Field Singularities In Photo-Conducting Antennas, Yi Cai

Dissertations

In recent years, generation of ultra-short electromagnetic pulses with frequency components in the terahertz (THz) range has been achieved by various techniques. Among those different methods, photo-conducting antennas have proven to be the most efficient source of THz radiation. THz spectrometers utilizing such photo-conducting antennas as transmitters and receivers are meanwhile routinely used for spectroscopic studies in the frequency regime between 0.1 to 5THz, which can be covered by neither conventional optical nor microwave spectrometers. However, THz emission power from the existing photo-conducting antenna is not sufficient for many applications (such as electro-optic sampling for real time THz detection and …

A Model For Travel Mode Switching, Lei Cao

Dissertations

Transportation policy research assesses the effect of policy changes such as the imposition of a parking charge or the augmentation of passenger rail service, on individual travel behavior. Over the last few decades, Conditional Lo it Model has been strongly advocated among discrete choice models for transportation policy study due to its ease of estimation and realistic outcomes.

This dissertation analyzes the necessity of the entry of constraints in the indirect utility function. These functions are used in discrete choice models and form the basis for travel demand modeling. This dissertation proposes a hypothesis that the explicit entry of constraints …

Design And Characterization Of Ultra High Frame Rate Burst Image Sensors, Rakesh K. Kabra

Dissertations

This thesis research was aimed at investigating and designing novel architectures required for ultra high frame rate (UHFR) imagers capable of operating at frame rates in excess of 10⁶ frames/sec. To demonstrate the feasibility of these architectures, a 180 x 180 element UHFR-I imager was designed and fabricated. The imager chip stored the latest 32 frames at its on-chip memory locations rather than performing a continuous readout. It was demonstrated that this architecture approach could achieve a frame acquisition rate of 2 x 10⁶ frames/sec. Additionally, other novel design features were incorporated to minimize optical cross talk and …

Dual Material Gate Field Effect Transistor (Dmg-Fet), Wei Long

Dissertations

Improving performance and suppressing short channel effects are two of the most important issues in present field effect transistors development. Hence, high performance and long channel like behaviors are essential requirements for short channel FETs. This dissertation focuses on new ways to achieve these significant goals. A new field effect transistor - dual material gate FET (DMG-FET) - is presented for the first time. The unique feature of the DMG-FET is its gate which consists of two laterally contacting gate materials with different work functions. This novel gate structure takes advantage of material work function difference in such a way …

Decentralized Reliable Control For Large-Scale Lti Systems, Zhengfang Chen

Dissertations

Reliable control concerns the ability of closed loop system to maintain stability and regulation properties during arbitrary sensor, controller, and actuator failure. Reliable control research has been an active research topic for more than 10 years.

Recent approach for reliable control includes the H∞ method, the algebraic factorization design, and the robust servomechanism control. These methods have been surveyed and discussed in this thesis with the robust servomechanism control methodology serving as the basis of the research development of this work.

In this thesis, the reliable control for large-scale, multi-input/output linear system is considered. Two concepts of reliable control …

Cantilever Beam Microactuators With Electrothermal And Electrostatic Drive, Murat M. Okyar

Dissertations

Microfabrication provides a powerful tool for batch processing and miniaturization of mechanical systems into dimensional domain not accessible easily by conventional machining. CMOS IC process compatible design is definitely a big plus because of tremendous know-how in IC technologies, commercially available standard IC processes for a reasonable price, and future integration of microma-chined mechanical systems and integrated circuits. Magnetically, electrostatically and thermally driven microactuators have been reported previously. These actuators have applications in many fields from optics to robotics and biomedical engineering.

At NJIT cleanroom, mono or multimorph microactuators have been fabricated using CMOS compatible process. In design and fabrication …

Micro Electromechanical Relays And Their Application In Variable Inductor Networks, Shifang Zhou

Dissertations

A family of microrelay devices together with integrated inductor networks has been designed, simulated, fabricated and experimental characterized. These switched networks utilize microelectromechanical systems (MEMS) as a fabrication technology and take advantage of the economies of semiconductor cleanroom batch-processing.

A new type of microrelay has been developed using a suspended TaSi₂/SiO₂ bimorph cantilever beam, gold-to-gold electrical contact, aluminum as sacrificial layer, and a combined thermal and electrostatic means of actuation. For the first time a micro variable inductor network which is digitally controlled by microrelays has been demonstrated. A test structure for electrical micro contact characterization has …

Numerical Study Of Three-Dimensional Free Convection From Semi-Enclosed Geometry And Discontinuous Heat Sources, Aklilu T.G. Giorges

Dissertations

Three-dimensional natural convection from three-by-three array of isoflux heat sources mounted on one vertical wall of semi-enclosed region has been numerically investigated. Detailed thermal information of this important engineering configuration is currently not available. The major objective of this study was to obtain this needed thermal and velocity information.

The semi-enclosed geometry can be viewed as a thin rectangular region with four closed and two open sides. The open surfaces are located at the top and adjacent side. For the fluid air, Pr = 0.71, the study covered a heat flux based Rayleigh number (Ra) range of (10² ≤ …

Removal Of Vocs From Superfactant-Flushed Wastewater By Membrane Based Modified Pervaporation Process, Anirban Das

Theses

An aqueous solution of a volatile organic compound (VOC) e.g. trichloroethylene (TCE) is passed through the bores of hydrophobic microporous polypropylene hollow fibers having a plasma polymerized silicone coating on the fiber outside diameter; a vacuum is maintained on the shell side of the fiber to remove the VOC and recover it by condensation. Process performance has been obtained over a range of feed flow rates, concentrations of VOC and the surfactant (sodium dodecyl sulfate (SDS)). In solutions without surfactant or low surfactant concentrations, the pores are not wetted and remain gas-filled. The VOC is stripped from the solution into …

Kinematic Analysis Of A Swash-Plate Mechanism Using Transformation Matrices, David Edgar Evans

Theses

The swash-plate mechanism is used to transfer rotational motion into translational motion and vice versa. Using transformation matrices to describe each joint, the displacements of the swash-plate mechanism were analyzed. The general transformation matrix model for the plane joint, not previously developed using transformation matrices, was presented. The solution was tested using a computer program. Examples of three different swash-plate angles; 10, 45, and 25' were considered. The solution was found to agree with previous solutions while offering a more complete description of the mechanism. Future work in this area could include a complete static, velocity, and/or dynamic analysis of …

Design, Fabrication And Characterization Of The Infrastructure For A Two Part Non Volatile Ram, Suma Madapur

Theses

The present trend is to be able to develop cheaper and more convenient methods to design and fabricate non volatile RAM that will lead to an alteration of the computer architecture itself This will help replace the DRAM, which the computers currently have in their memory. The proposed NVRAM is designed to overcome the common difficulties faced with the use of ferroelectric materials used in the fabrication of NVRAM. The new idea essentially consists of fabricating the circuitry component separately and the substrate component separately and binding the two with the help of a conducting material. Electrical properties such as …

Introduction To Pollution Prevention Concepts In Freshman Chemistry Through Simulations And Hypermidia, Aniraban Bhaumik

Theses

As citizens of the 20th century, a key issue we all are aware of is degradation of the environment. In the interest of teaching the environmental issues to freshmen engineers, this study develops a computer aided learning/teaching (CAL/T) tool.

This CAL/T tool consists of Internet based multimedia courseware and intelligent simulations. The courseware assembles the fundamentals of chemistry associated with current environmental issues such as air pollution, stratospheric ozone layer depletion and environmentally sensitive or 'clean' manufacturing. The courseware targets early and comprehensive understanding of pollution prevention concepts with a focus on environmentally friendly manufacturing. The courseware includes: on-line text, …

Optimal Synthesis Of A Planar Four-Bar Function Generator Based On Imderect Measure Of Structural Error, Robert Ellis

Theses

A novel technique for optimal synthesis of a planar four-bar function generator is presented. An indirect measure of structural error is used to formulate an objective function which, along with its derivatives, is straightforward to evaluate and results in an elegant and robust algorithm. Lagrange multipliers are used to incorporate the loop closure constraint into the objective function.

In this thesis, the formulation of the objective function and the minimization algorithm are described, examples are presented, and the virtues and shortcomings of the algorithm are discussed.

Performance Enhancement Of Linear Robotic Workcell Using Dsp Based Control, Kedar Arvind Godbole

Theses

Robotic Controllers have for the major part been computer implementations of PID or similar controllers. In this thesis DSP based control of a Robotic Workcell is presented. The control algorithms used with the DSP based controller are Input Shaping and also State Feedback. Input Shaping is a Feed Forward strategy for eliminating vibration under certain conditions. In this thesis Input Shaping is applied to the performance enhancement of a linear robot system. Although feedback control strategies offer higher accuracy and are much more robust, feedforward strategies offer possibilities for improving the response time. Input Shaping is successfully applied to the …

Parameter Optimization For Curl Distortion In Building Parts Using 3-D Laser Stereolithography, Laurel A. Hanesian

Theses

The curl distortions in rapid prototyping using 3-D laser stereo lithography occur as the top layers shrink after being drawn and attaching to the bottom layers. The amount of curl is dependent upon the how much shrinkage the layer has finished prior to adhesion. It is also dependent on how deep the cure of the top layer amounts to as it adheres into the bottom layer. This thesis investigated the effect of build parameters on the distortions associated with the diagnostic 'Letter-H' shaped test part. The same parameters were also considered in a time optimization study, using calculated, predicted results …

Development And Characteristics Of Carbon Nitride Thin Solid Films For Advanced Coating Applications, Muhammad A. Hussain

Theses

Carbon nitride films were synthesized on silicon substrate by reactive magnetron sputtering of graphite target in an environment of Ar and nitrogen gas. The performance of a negative carbon ion source was also investigated to use the source in negative ion-beam-assisted deposition. These films were synthesized at room temperature at a constant pressure of 5 mtorr and at 300 Watts R.17 power, but at different composition of nitrogen in Ar-N₂ gas mixture ranging from 0-53 percent. The films deposited were microscopically smooth, amorphous and their properties found to be varied with nitrogen composition in plasma. The deposition rate was …

Evaluating The Communications Capabilities Of The Generalized Hypercube Interconnection Network, Sanjay Krishnamurthy

Theses

This thesis presents results of evaluating the communications capabilities of the generalized hypercube interconnection network. The generalized hypercube has outstanding topological properties, but it has not been implemented in a large scale because of its very high wiring complexity. For this reason, this network has not been studied extensively in the past. However, recent and expected technological advancements will soon render this network viable for massively parallel systems.

We first present implementations of randomized many-to-all broadcasting and multicasting on generalized hypercubes, using as the basis the one-to-all broadcast algorithm presented in [3]. We test the proposed implementations under realistic communication …

Low Pressure Chemical Vapor Deposition Of Boron Nitride Thin Films From Triethylamine Borane Complex And Ammonia, Narahari Ramanuja

Theses

Boron nitride thin films were synthesized on Silicon and quartz substrates by low pressure chemical vapor deposition using triethylamine-borane complex and ammonia as precursors. The films were processed at 550°C, 575°C and 600°C at a constant pressure of 0.05 Torr at different precursor flow rates and flow ratios.

Several analytical methods such as Fourier transform infrared spectroscopy, x- ray photo-electron spectroscopy, ultra-violet/visible spectrophotornetry, ellipsometry, surface profilometry and scanning electron microscopy were used to study the deposited films. The films deposited were uniform, amorphous and the composition of the films varied with deposition temperature and precursor flow ratios. The stresses in …

A Study To Analyze And Improve Mechanical And Electro-Mechanical Designs Using Design For Quality Manufacturability (Dfqm) Technique, Bhavani P. Veerapaneni

Theses

The competitive nature of modern manufacturing demands that an innovative approach be used to build advanced and robust designs. Shortening the product development time, which is the period from initial design to full production, is a priority to most manufacturers today. Design for Quality Manufacturability (DFQM) is a methodology to address manufacturing / assembly quality issues during product design. As a consequence DFQM helps shorten the product development time.

The DFQM methodology addresses the issue of quality manufacturability (QM) - the likely hood that defects will occur during the manufacture of a product in a standard plant. The DFQM architecture …