Engineering Commons^™

Case Histories Of Two Kinds Of Composite Function − Constructing Buildings Over-Crossing Canals, Niu Zhirong, Zhou Changyong

International Conference on Case Histories in Geotechnical Engineering

Two kinds of ground treatment methods of two buildings with 6 stories over-crossing irrigation canal will be inquired in the paper. The author analyses and compares respectively the design methods, action mechanisms, construction methods and treatment effects of sand column, powder deep mixing method (PDM), and chooses the best ground treatment method from the two. Moreover, the reason why the effects of obliterating liquefaction with PDM are little is discussed in the paper.

Design Of Contaminated Dredged Fills Utilizing Geosynthetics, Ronald C. Chaney, Kenneth Demars, Gregory N. Richardson

International Conference on Case Histories in Geotechnical Engineering

Throughout the Great Lakes, about four million cubic yards of sediments are dredged annually to maintain navigation in channels and harbors for commercial, military and recreational users, and as part of environmental projects. CDF design criteria based on contaminant level and partitioning potential of sediments is presented. CDF designs reflect the level of isolation which the sediments under consideration warrant. In this paper the application of geosynthetic components for limiting contaminant pathways in the CDF containment basin and final closure arc discussed.

Effects Of Effluents Of Industrial Waste On Soil Properties (A Case Study Of Nandesari Area, Vadodara), D. L. Shah, A. V. Shroff

International Conference on Case Histories in Geotechnical Engineering

Around Vadodara City (Gujarat) number of chemical industries dispose of water, air and oil based pollutant everyday. The pollution process in soil due to the industrial effluent discharge on to the land and its effect on the geotechnical properties of soil arc discussed in the present case study. Uncontrolled exploitation of the natural resources have resulted in an unanticipated soil behaviour due to environmental degradation. This resulted in an increased interest in the study of environmental geotechnics which is a means of forecasting soil behaviour to the changing environment.

Case Histories Of Foundations. Paper No. Gr-I, Alan J. Lutenegger, Carole L. B. Mitchell

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Case Histories Of Soil Improvement, Grouting, Geosynthetics, Dynamic Compaction, Vibroflotation, Blasting And Other Methods Including Geo Economics. Paper No. Gr-Vii, Steven J. Winter

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Conference Snapshots, Multiple Participants

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Using Simulation To Model Time Utilization Of Army Recruiters, James D. Cordeiro Jr., Mark A. Friend

Theses and Dissertations

It is a well-known fact Army recruiters work very long hours in a demanding environment. In many cases, recruiting stations are geographically isolated from military bases, with recruiters often tolerating a high cost of living, crime, and other such adverse conditions that characterize the communities they work in. The job itself demands self-starting, motivated individuals with a wide range of skills, from street-savvy to salesmanship, in order to succeed. A number of factors in recent years have made military recruiting more difficult, which include scandals involving highly-placed soldiers and changes in attitudes towards military service among eligible men and women. …

Flight Physician - March, 1998, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A sixteen page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Acuta Enews March 1998, Vol.27, No. 3

ACUTA Newsletters

In This Issue

Nominate Now for Board of Directors

Change Reflects Our Growth

Student Paper Competition Deadline

Board Report

"Click Here to Enter a Sweepstakes"

ACUTA Local Event

Spotlight

Maureen Trimm Is New Director-at-Large

Are You Listening?

DC at a Glance

Positions Available

Welcome New Members

Adding Fuzzy Integral To Fuzzy Control, Hung T. Nguyen, Vladik Kreinovich, Richard Alo

Departmental Technical Reports (CS)

Sugeno integral was invented a few decades ago as a natural fuzzy-number analogue of the classical integral. Sugeno integral has many interesting applications. It is reasonable to expect that it can be used in all application areas where classical integrals are used, and in many such areas it is indeed useful. Surprisingly, however, it has never been used in fuzzy control, although in traditional control, classical integral is one of the main tools.

In this paper, we show that the appropriately modified Sugeno integral is indeed useful for fuzzy control: namely, it provides numerical characterization of stability and smoothness …

The Rationale For Negligible Risk Exemptions In The Telecommunications Act Of 1996: Cellular Phone And Personal Communication System Transmitters, Gregg H. Claycamp

RISK: Health, Safety & Environment (1990-2002)

Dr. Claycamp explains the adequacy of current legislation and regulation.

Design Of Automotive Structural Components Using High Strength Sheet Steels Effect Of Strain Rate On Material Properties And The Structural Strength Of Cold-Formed Steel Members, Wei-Wen Yu

CCFSS Library (1939 - present)

PREFACE The research work on automotive components conducted at the University of Missouri-Rolla under the sponsorship of the American Iron and Steel Institute began in 1982. During the first six years, studies were made on the basis of static loading. Since May 1988, studies have been concentrated on the effect of strain rate on material properties and the structural strength of cold-formed steel members along with the behavior of hybrid members. The research findings for the period from 1988 through 1997 are summarized in this report. Special thanks are expressed to General Motors Corporation (Dr M. Y. Sheh, Mr. B. …

How To Divide A Territory? A New Simple Differential Formalism For Optimization Of Set Functions, Hung T. Nguyen, Vladik Kreinovich

Departmental Technical Reports (CS)

In many practical problems, we must optimize a set function, i.e., find a set A for which f(A) is maximum, where f is a function defined on the class of sets. Such problems appear in design, in image processing, in game theory, etc.

Most optimization problems can be solved (or at least simplified) by using the fact that small deviations from an optimal solution can only decrease the value of the objective function; as a result, some derivative must be equal to 0. This approach has been successfully used, e.g., for set functions in which the desired set A …

Computational Complexity And Feasibility Of Fuzzy Data Processing: Why Fuzzy Numbers, Which Fuzzy Numbers, Which Operations With Fuzzy Numbers, Hung T. Nguyen, Misha Kosheleva, Olga Kosheleva, Vladik Kreinovich, Radko Mesiar

Departmental Technical Reports (CS)

In many real-life situations, we cannot directly measure or estimate the desired quantity r. In these situations, we measure or estimate other quantities r1,...,rn related to r, and then reconstruct r from the estimates for r_i. This reconstruction is called data processing.

Often, we only have fuzzy information about ri. In such cases, we have fuzzy data processing. Fuzzy data means that instead of a single number ri, we have several numbers that describes the fuzzy knowledge about the corresponding quantity. Since we need to process more numbers, the computation time for fuzzy …

Operations With Fuzzy Numbers Explain Heuristic Methods In Image Processing, Olga Kosheleva, Vladik Kreinovich, Bernadette Bouchon-Meuiner, Radko Mesiar

Departmental Technical Reports (CS)

Maximum entropy method and its heuristic generalizations are very useful in image processing. In this paper, we show that the use of fuzzy numbers enables us to naturally explain these heuristic methods.

Decision Making Based On Satellite Images: Optimal Fuzzy Clustering Approach, Vladik Kreinovich, Hung T. Nguyen, Scott A. Starks, Yeung Yam

Departmental Technical Reports (CS)

In many real-life decision-making situations, in particular, in processing satellite images, we have an enormous amount of information to process. To speed up the information processing, it is reasonable to first classify the situations into a few meaningful classes (clusters), find the best decision for each class, and then, for each new situation, to apply the decision which is the best for the corresponding class. One of the most efficiently clustering methodologies is fuzzy clustering, which is based on the use of fuzzy logic. Usually, heuristic clusterings are used, i.e., methods which are selected based on their empirical efficiency …

Towards The Use Of Aesthetics In Decision Making: Kolmogorov Complexity Formalizes Birkhoff's Idea, Misha Kosheleva, Vladik Kreinovich, Yeung Yam

Departmental Technical Reports (CS)

Decision making is traditionally based on utilitarian criteria such as cost, efficiency, time, etc. These criteria are reasonably easy to formalize; hence, for such criteria, we can select the best decision by solving the corresponding well-defined optimization problem. In many engineering projects, however, e.g., in designing cars, building, airplanes, etc., an important additional criterion which needs to be satisfied is that the designed object should be good looking. This additional criterion is difficult to formalize and, because of that, it is rarely taken into consideration in formal decision making. In the 1930s, the famous mathematician G. D. Birkhoff has proposed …

Joint Wavelet Transform Correlation With Separated Target And Reference Planes, Boon Yi Soon, Mohammad A. Karim, Russell C. Hardie, Mohammad S. Alam

Electrical and Computer Engineering Faculty Publications

In recent years, we realize the usefulness of feature extraction for optical correlator and hereby, we investigate the capability of Laplace operator in feature extraction of multiple targets. The first-order terms and the false alarm terms in the correlation output would be removed using electronic power spectrum subtraction technique. Most importantly, the entire magneto-optic SLM is completely utilized for displaying only targets in the input scene. A new cost efficient hardware implementation is proposed and aforementioned result of the proposed system is evaluated through computer simulation.

Evaluations Of Wall Structures In Kentucky (Kyspr-85-107), L. John Fleckenstein, Brad W. Rister, David L. Allen

Kentucky Transportation Center Research Report

Approximately 209 retaining wall structures were visually evaluated under this study for long-term performance. The inspection included concrete crib, single-barrel and double-barrel culvert wing, metal bin, Gabion, rigid concrete, Keystone block, tiedback, mechanically stabilized earth (M.S.E.), Tech Wall, and sound walls. Significant structural distress was observed in several of the wall systems. This report discusses the performance of each wall system and makes recommendations on the future use of these systems.

Modified Multiple Model Adaptive Estimation (M3Ae) For Simultaneous Parameter And State Estimation, Mikel M. Miller

Theses and Dissertations

In many estimation problems, it is desired to estimate system states and parameters simultaneously. However, inherent to traditional estimation architectures of the past, the designer has had to make a trade-off decision between designs intended for accurate state estimation versus designs concerned with accurate parameter estimation. This research develops one solution to this trade-off decision by proposing a new architecture based on Kalman filtering (KF) and Multiple Model Adaptive Estimation (MMAE) techniques. This new architecture, the Modified-MMAE (M³AE), exploits the benefits of an MMAE designed for accurate parameter estimation, and yet performs at least as well in state …

Calculating A Value For Dominant Battlespace Awareness, Eric A. Beene

Theses and Dissertations

In times of ever-tightening military budgets, methodologies are required that can compare the contributions of various systems involved in the warfighting process. While many tools are in use that directly measure the effects of greater numbers of enhanced hardware, and even improved processes, no validated methodology exists to measure elements that contribute to Command, Control, Communications, and Computers (C4); Intelligence, Surveillance, and Reconnaissance (ISR); or to analytically compare these elements with more traditional hardware. This thesis develops a methodology for mathematically quantifying awareness in a military command and control (C2) environment. This methodology begins with the Observe-Orient-Decide-Act Loop to show …

Sensitivity Analysis Of Brawler Pilot Skill Levels, Daniel C. Buschor

Theses and Dissertations

BRAWLER is a high resolution air to air combat simulation model used for engagement level analyses of few on few air combat. It uses a value driven decision logic to help simulate pilot behavior. In order to account for varied pilot skill levels, BRAWLER has defined three skill levels; Rookie, Pilot, and Ace. A Rookie can track up to three aircraft in its mental model, the Pilot, up to five aircraft, while an Ace has no limit. Further, each skill level varies the amount of time before a known aircraft, which has not been recently observed, is purged from the …

An Airlift Hub-And-Spoke Location-Routing Model With Time Windows: Case Study Of The Conus-To-Korea Airlift Problem, David W. Cox

Theses and Dissertations

Traditionally, the United States Air Force's Air Mobility Command (AMC) has used the concept of direct delivery to airlift cargo and passengers from a point of embarkation to a point of debarkation. This study develops an alternative hub-and-spoke combined location-routing integer linear programming prototype model, and uses this model to determine what advantages a hub-and-spoke system offers, and in which scenarios it is better-suited than the direct delivery method. Additionally, the analysis suggests that the C-17 may be better-suited, in certain airlift situations, for theater airlift versus strategic (direct delivery) airlift. The model features the following elements: time windows, cargo …

Sensitivity Analysis Of The Thunder Combat Simulation Model To Command And Control Inputs Accomplished In A Parallel Environment, David A. Davies

Theses and Dissertations

This research had two objectives. The first was to develop a methodology to demonstrate the parallel processing capability provided by Air Force's Aeronautical System's Command (ASC) Major Shared Resource Center (MSRC) and apply that methodology to the SIMAF Proof of Concept project. Secondly, AFSAA/SAAB requested a sensitivity analysis of THUNDER to the modeled command and control (C2) inputs. The power of parallelization can not be overemphasized. The data collection phase of this thesis was accomplished at the MSRC using a script developed to automate the processing of an experimental design, providing the analyst with a launch and leave capability. On …

A Life Cycle Cost Model For Innovative Remediation Technologies, Osman S. Dereli

Theses and Dissertations

LCC analysis is a powerful tool for investigating the costs of competing systems. This thesis investigates the cost scaling methods to improve the traditional LCC modeling techniques. The motivation for this research is finding a good estimate for the remediation technologies when the contaminant volume is not exactly known. This specific case lead researcher to investigating the methods of cost scaling and effects of inflation in the cost estimation. As a result of study a generic LCC model is developed. Methods for considering inflation and scaling are recommended and embodied into the model. The developed model is applied the specific …

Anderson-Darling And Cramer-Von Mises Based Goodness-Of-Fit Tests For The Weibull Distribution With Known Shape Using Normalized Spacings, Eric W. Frisco

Theses and Dissertations

Two new goodness-of-fit tests are developed for the three-parameter Weibull distribution with known shape parameter. These procedures eliminate the need for estimating the unknown location and scale parameters prior to initiating the tests and are easily adapted for censored data. This is accomplished by employing the Anderson-Darling and Cramer-von Mises statistics based on the normalized spacings of the sample data. Critical values of the new tests are obtained for common significance levels by large Monte Carlo simulations for shapes 0.5(0.5)4.0 and sample sizes 5(5)40 with up to 40% censoring (Type II) from the left and/or right. An extensive Monte Carlo …

An Operational Review Of Air Campaign Planning Automation, William R. Haas

Theses and Dissertations

The air campaign planning process is a complex and dynamic process. Operations research has been applied to this problem to shorten the planning cycle with mixed results. The Joint Force Air Component Commander Planning Tool was developed as an air campaign planning aid. It uses the Conventional Targeting and Effectiveness Model (CTEM) as the force analysis model for master air attack plan (MAAP) planning. This thesis reviews the limitations and assumptions of CTEM and CTEM in JPT from and operational perspective. A new approach to using models in air campaign planning, collaborative planning, is being developed for use with JPT. …

Investigating Sorbent Geometry Response Surfaces From Sorption Rate Data, H. Michael Harrison

Theses and Dissertations

Sorption and desorption of hydrophobic organic compounds (HOCs) into soil particles occurs at Air Force contamination sites. Long-term desorption extends clean up time, costing billions. Accurately modeling desorption will reduce costs and improve clean up designs. State of the art models depict soil as uniform spherical particles which lose the effect of longer sorption path lengths. An alternate approach, the multiple sites in series (MSS) model, describes the sorption capacity of a mixture of soil particle sizes and shapes using a composite particle defined by a two parameter statistical distribution. When the MSS model uses a general radial geometry function …

An Evaluation Of Frequency Domain Ensemble Averaging To Improve Aircraft Stability Derivative Estimation, Lawrence M. Hoffman

Theses and Dissertations

This research evaluated a process to improve aircraft stability derivative estimation results. The Have Derivatives process used overlap ensemble averaging in the frequency domain to minimize noise on the original time domain signals. The process estimated average complex frequency response functions that were then transformed back into the time domain as a set of discrete pulse responses with far less noise than the original signals. These clean signals were used in a parameter estimation program to estimate better stability derivatives than were estimated with the original noisy signals. Both simulation and flight test data were used to study the effects …

A New Sequential Goodness Of Fit Test For The Three-Parameter Weibull Distribution With Known Shape Based On Skewness And Kurtosis, Jonathan C. Clough

Theses and Dissertations

The Weibull distribution finds wide applicability across a broad spectrum of disciplines and is very prevalent in reliability theory. Consequently, numerous statistical tests have been developed to determine whether sample data can be adequately modeled with this distribution. Unfortunately, the majority of these goodness-of-fit tests involve a substantial degree of computational complexity. The study presented here develops and evaluates a new sequential goodness-of-fit test for the three-parameter Weibull distribution with a known shape that delivers power comparable to popular procedures while dramatically reducing computational requirements. The new procedure consists of two distinct tests, using only the sample skewness and sample …