Engineering Commons^™

An Efficient And Effective Approach To Column-Based Input/Output Encoding In Functional Decomposition, Michael Burns, Marek Perkowski, Stanislaw Grygiel, Lech Jozwiak

Electrical and Computer Engineering Faculty Publications and Presentations

Encoding in Curtis-style decompositions is the process of assigning codes to groups of compatible columns (or cubes) so that the binary logic descriptions of the predecessor and successor sub-functions can be created for further decomposition. In doing so, the sub-functions created are functionally equivalent to the set of care values specified in the original function. In this paper an input/output encoding algorithm DC_ENC is presented that is designed to achieve the simplest total complexity of the predecessor and successor sub-functions, and to increase the total number of don't cares for their further utilization in subsequent decomposition steps of these sub-functions.

Production And Propagation Of Hermite–Sinusoidal-Gaussian Laser Beams, Lee W. Casperson, Anthony A. Tovar

Electrical and Computer Engineering Faculty Publications and Presentations

Hermite–sinusoidal-Gaussian solutions to the wave equation have recently been obtained. In the limit of large Hermite–Gaussian beam size, the sinusoidal factors are dominant and reduce to the conventional modes of a rectangular waveguide. In the opposite limit the beams reduce to the familiar Hermite–Gaussian form. The propagation of these beams is examined in detail, and resonators are designed that will produce them. As an example, a special resonator is designed to produce hyperbolic-sine-Gaussian beams. This ring resonator contains a hyperbolic-cosine-Gaussian apodized aperture. The beam mode has finite energy and is perturbation stable.

Pneumatic Fracture Propagation And Particulate Transport In Geologic Formations, Suresh Puppala

Dissertations

Pneumatic fracturing is an in situ remediation enhancement technology developed to increase the permeability of contaminated geologic formations. This technology can also be used to deliver atomized liquid and particulate supplements to geologic formations, thereby enhancing in situ processes such as bioremediation and reactive dechlorination.

The main objective of this study was the development of a mathematical model that simulates the propagation of pneumatic fractures in soil and rock formations. Pneumatic fracture propagation differs from other fluid fracturing phenomena in the propagation velocity (1-3 m/sec) and the viscosity of the fracturing fluid (1.9E-05 Pa•sec). For the purposes of model development, …

Automatic Analysis Of Electronic Drawings Using Neural Network, Yi Shi

Dissertations

Neural network technique has been found to be a powerful tool in pattern recognition. It captures associations or discovers regularities with a set of patterns, where the types, number of variables or diversity of the data are very great, the relationships between variables are vaguely understood, or the relationships are difficult to describe adequately with conventional approaches.

In this dissertation, which is related to the research and the system design aiming at recognizing the digital gate symbols and characters in electronic drawings, we have proposed: (1) A modified Kohonen neural network with a shift-invariant capability in pattern recognition; (2) An …

Adaptive Bootstrap Signal Separators For Bpsk/Qam-Modulated Wireless Cdma Systems In A Multipath Environment, Nico J.M. Van Waes

Dissertations

CDMA is an attractive multiple-access scheme, because of its potential capacity increase and its anti-multipath fading capability. For satisfactory performance, however, the effect of the "near-far" problem has to be resolved. This problem can be combated by using power-control, which, however, results in an overall reduction in communication ranges, and thus in a loss of capacity. Among other methods for mitigating the near-far problem is the use of decorrelating receivers, both of fixed type, which directly utilizes the cross-correlation of the users codes, and of adaptive type, which uses recursive algorithms that leads to signal decorrelation. Not to lessen the …

Analysis Of Multi-Lead Qt Dispersion By Means Of An Algorithm Implemented On Labview, Zafer Sahinoglu

Theses

QT dispersion measurement is significant in diagnostic ECG, and several methods are proposed in the literature to implement QT measurement.

This study consists of two parts: The first part was the development of an algorithm to measure both QT interval and QT dispersion. To check the reliability of the algorithm, 25 single channel ECGs were recorded and their QT intervals were computed. On two subjects, three and four lead ECG data were recorded respectively and their QT dispersions were statistically analyzed. Another part of this study dealt with the effect of the electric dipole of the heart on QT dispersion. …

Telephone-Accessed Controller Using Cebus For Device Control Over Power Line, Gerald Aska

Theses

The CEBus standard has made it possible for devices developed by different manufacturers to communicate over the power line. Further, the standard allows analog adjustments of devices besides transmitting and receiving binary information. This Controller extends the distance from which these devices can be controlled.

To extend the distance of communication with a device, a telephone line interface was developed that allows the user to communicate with a CEBus device via the Controller. The Controller responses [sic] to Central Office signaling and opens its communication channel to allow the user to provide it with the commands by using the telephone …

Analysis And Applications Of Ftir Systems, Gunjan Navin Doshi

Theses

Fourier Transform Infrared Spectroscopy (FTIR) is a dynamical instrumental technique used in industry for measuring high quality infrared spectra. Over the last 25 years, the increased demand for having an efficient real-time quantitative measurement technique has led to extensive research and development in the field of FTIR Spectroscopy. Through the use of FTIR, sensitivity has increased, size of the smallest sample that can be analyzed has been reduced, and the number of new applications has exploded. In this thesis, an attempt is made to study the principles, theory, instrumentation and applications of FTIR Spectrometry. We survey the working of spectrometer, …

Utilizing Gis Technology For Brownfields Redevelopment, Jeffrey J. Duteau

Theses

Typically, when developers, banks and other organizations have an interest in a piece of property they perform an extensive information search to determine if the site is worth purchasing. This search could consist of tax and title information, the location of utilities and major roadways in the area, information on population demographics and environmental contaminant data. An information search of this type could take days, weeks or even months to compile. With a geographic information system (GIS), this search could take a matter of minutes and is displayed in an easy to understand graphic or map form along with a …

Reuse Of Cold Top Ex-Situ Vitrified Chromium Contaminated Soils In Hot Mix Asphalt Concrete, Gerald Charleston

Theses

This research investigated the pilot scale feasibility of the remediation of chromium contaminated soil through cold top ex-situ vitrification and the reuse of the vitrified products as highway construction aggregates. There are more than two million tons of chromite ore residues from the chromate extraction manufacturing leftover in Hudson County, New Jersey. They contained both un-leached hexavalent and unoxidized trivalent chromium. Hexavalent chromium is well known as a group A human carcinogen. It is also considered an environmental and health hazard. Of the many ex- situ and in-situ physical, chemical, and biological treatment technologies for chromate production waste, the ability …

Synthesis And Characterization Of Silicon Dioxide Films Using Diethyl Silane And Oxygen, Kiran Kumar

Theses

This study focuses on producing thin and thick silicon dioxide films towards the fabrication of integrated optical sensor capable of monitoring and determining in-situ, the concentration of numerous analyze species simultaneously. In this study, diethylsilane (DES) has been used as a precursor to produce silicon dioxide films by low pressure chemical vapor deposition. The films were synthesized with two different flow ratios of oxygen to DES in the temperature range of 550°C to 800°C at a constant pressure of 200mTorr. The films deposited with lower oxygen to DES flow ratio have very high growth rate but suffer from high tensile …

Object Oriented 3d Dynamic Simulation Of Flow Of Material Through Hopper, Krishnendu Roy

Theses

Development of object oriented 3D dynamic simulation of the particle is considered. This code is based on the soft sphere model dealing with both normal force , tangential force and the friction. The development of such a model and the code is motivated by the need to understand the flow patterns of granular material. The prime effort while developing this code was focused on the data encapsulation and secured access to all the attributes of all physical parameters of the bulk solid, which might be endangered by the random access of the interface of the software. A dynamically bound array …

The Determination Of 2-Methylisoborneol And Geosmin In Water Using Fluorescence Spectroscopy, Ramesh Chandra Sharma

Theses

Geosmin and 2-Methylisoborneol are responsible for imparting earthy, musty taste and odor qualities to water. The human threshold odor concentrations (TOCs) for 2-MIB and Geosmin vary over a wide range. TOCs of 10ng/1 for Geosmin and 30ng/1 for 2-MIB have been reported.

Currently available methods are time consuming and require use of sophisticated technique and expensive equipment.

Fluorescence spectroscopy has been successfully used in the identification of many organic compounds. Geosmin and 2-MIB have organic origin. This research explores the possibility of using the technique of fluorescence spectroscopy in the determination of Geosmin and 2-MIB. The excitation and emission wavelengths …

Composite Columns, Magnar Berge

Theses

The purpose of this thesis is to provide an introduction in the design of composite columns. The design methods according to AISC and Eurocode 4 are summarized and provide a procedure to design a composite column. In addition, equation are derived to determine the nominal flexural strength of typical composite cross-sections.

Tools For The Design Of Flexible Manufacturind Systems, Prashant A. Patel

Theses

Flexibility in manufacturing systems can broaden the horizons for a company. But the means for achieving it are far more critical. This trend is created by the increase in competitiveness, growth of technology along with demand variations, more customization, and short product life cycles. But "Flexible Manufacturing Systems" to most of the manufacturers sounds like a synonym for automation.

A real Flexible Manufacturing System is designed when every unit of the company is synchronized in such a way to respond in a harmony to any changes that come against it. Fine-tuning of each and every part of the company is …

Measurement Of The Baroreceptor Sensitivity Index (Brsi) In The Frequency Domains, Tanvir Raquib

Theses

Time domain analysis for calculating the Baroreceptor Sensitivity Index (BRSI) did not always provide an accurate result. It also had another limitation in that it could not show the influence of the autonomic nervous system for different subjects. The correlation coefficient is a mechanism that was used to either accept or reject the BRSI values in the time domain but the correlation coefficient values changed drastically depending on how many sample points were selected for the calculation.

On the other hand, frequency domain analysis for the BRSI calculation was relatively easier and provided more accurate information compared to the time …

Improving The Run Time Of The Decomposition Algorithm For Fault Tolerant Clos Interconnection Networks Through Swap Re-Ordering, Andrea Laura Mcmakin

Theses

Clos interconnection networks, used in data networks and computing systems, can contain extra switches to be used in faulty conditions. The speed of such fault tolerant Clos interconnection networks is improved through the use these switches in no-fault situations. The network can be represented by a matrix, which is then decomposed using an algorithm, and the switch settings are thus assigned.

The original decomposition algorithm consisted of four element swaps in the following order: wild swap, simple swap, next simple swap, and successive swap. However, by re-arranging these swaps with the simple swap first, followed by the next simple and …

Nanofiltration With Organic Solvents And Its Possible Applications To Organic Syntheses, Jose Antonio Whu

Theses

Experimental results on the nanofiltration (NF) separation behavior of three different solvent- compatible membranes are presented for three organic solutes of molecular weights 351, 826 and 1355 in methanol; the manufacturer-specified molecular weight cut-offs (MWCO) of the membranes are 250, 400 and 700. Membranes were primarily tested at 440 psig, at different concentrations of the solutes in methanol; the effect of varying the applied pressure was also briefly explored. The solvent permeation flux and the solute rejection were time dependent for an extended initial period; the membranes had to be compacted to achieve steady-state results. Furthermore, the manufacturer-specified MWCO was …

Stabilization Of Water Treatment Plant (Wtp) Residuals Using Sorbond, Rituraj Sinha

Theses

Disposal of water treatment plant (WTP) residuals has always been an important consideration for the water industry. Stringent water quality standards, environmental regulations, and unavailability of land for ultimate disposal affect disposal of large amounts of this residual. The search for alternate economical disposal options and beneficial use are probably the next most logical and economical step to take.

This study was performed to explore the possibility of stabilization of water treatment plant (WTP) residuals using additives. Three water treatment plant (WTP) residuals from treatment plants in New Jersey were used for the analysis. The objective of this research is …

Direct Electrochemical Reaction Of Cytochrome C At The Poly (Ethylene Oxide) Film Modified Gold Electrodes, Xiao-Gang Qu, Gong-Quan Sun, Hui Yang, Tian-Hong Lu

Journal of Electrochemistry

In this paper, the direct electrochemical reaction of cytochrome c was sudied at the poly (ethylene oxide) film modified gold electrodes. It was found the PEO is a good promoter for the electrochemical reaction of cytochrome c, and the reversibility of reaction of cytochrome c was found to depend on the molecular weight of PEO and the morphology of the PEO films.

Ac Impedance Study Of The La0.8Sr0.2Mno3/Ysz Electrode, Shi-Zhong Wang, Yi Jiang, Ya-Hong Zhang, Jing-Wang Yan, Wen-Zhao Li

Journal of Electrochemistry

Electrochemical reaction of oxygen on the La_0.8Sr_0.2MnO₃/YSZ electrode has been investigated in detail with AC impedance. The results demonstrated that the rate determining step(rds) of the reaction varies with the temperature, oxygen partial pressure and overpotential applied. At open circuit potential, the rds is the dissociative adsorption of oxygen on the LSM surface. A large number of electron holes are generated at high anodic overpotentials, while oxygen vacancies are formed at high cathodic overpotentials. The formation of the electron holes results in the electronic conduction of the YSZ electrolyte and the extension of the …

The Hydrogen Evolution Reaction On The Hydrogen Storage Alloy Electrode, Shi-Gang Lu, Qun Li, Qing-Guo Liu, Chun Lu, Bing Dang, Han-Xi Yang

Journal of Electrochemistry

The hydrogen evolution reaction was studied in 1 mol/L KOH solution on the hydrogen storage alloy Mm(NiCoMnAl)₅ electrode using open circuit potential decay and ac impedance technique. The reaction was found to proceed by the Volmer(discharge)-Tafel(recombination)mechanism. The measured overpotential η can be subdivided into two components η 1 and η 2 corresponding to the elementary Volmer and Tafel reaction. The Faradaic impedance was analyzed and characterized by the Volmer reaction. Then the exchange current density was evaluated . It was founded that the activity of hydrogen storage alloy electrode for the hydrogen evolution reaction was similar to that of …

Modification Of Carbon Anode Materials Of Lithium-Ion Secondary Battery, Yuping Wu, Chun-Rong Wan, Chang-Yin Jiang, Jiang-Iun Li

Journal of Electrochemistry

In this paper, the latest research work on modification of carbon anode materials of lithium ion secondary battery is reviewed. Modification methods include: incorporation of nonmetal elements such as boron, silicon, nitrogen, phosphorus and sulfur, metal elements such as potassium, aluminum, gallium and transitional metal elements such as vanadium, nickel, cobalt, copper and iron and surface treatment such as oxidation and formation of surface layer. Since these methods can affect the carbon materials' electronics state, crystal structure and surface structure, the electrochemical properties of the carbon materials could probably be improved. Besides, mechanisms for lithium storage in carbonaceous materials are …

Formation And Effect Of Tribo Cell For Fe Cr Alloy, Dong-Bai Sun, Tao Li, Hong-Ying Yu, De-Ji Yang

Journal of Electrochemistry

The micro galvanic corrosion of 1Cr18 alloy and its effects on the triboelectrochemical behavior were investigated and analyzed in this article. It is shown that the micro galvanic corroson is due to the electrochemical inhomogenity on the surface of the alloy during the friction process. Like galvanic corrosion,the micro galvanic corrosion behaviors are greatly affected by the area ratio of unrubbed to rubbed surface.The load effects on electrochemical behavior of 1Cr18 alloy are also attributed to existence of electrochemical inhomogenity on the surface of materal.

Lithiun Insertion In Carbon Nanotubes, Guo-Tao Wu, Chun-Sheng Wang, Zhong-Fu Qi, Wenz-Hu Li

Journal of Electrochemistry

Carbon nanotubes were produced by chemical vapour deposition(CVD) of acetylene under hydrogen gas.The reversible specific capacity of carbon nanotubes is up to 700 mAh/g, much higher than the theoretical specific capacity of graphite(372 mAh/g).After twenty charge/discharge cycles,the discharge capacity of carbon nanotube anode still maintains 65.3% of its original discharge capacity . Besides, the charge/discharge efficiency of carbon nanotube in the first charge/discharge cycle was found to improve from 42.6% up to 55.9% by coating carbon nanotubes with copper.

External Transducing Measurement Of The Internal Pressure In Sealed Battery By Resistance Strain Gauge, Han-Xi Yang, Rong-Hui Hu, Xin-Ping Ai, Cong-Zhi Yang, Sheng-Xian Li

Journal of Electrochemistry

A novel method to monitor dynamically the internal pressure of sealed battery with no damage of the battery by using of resistance strain measurement technique is presented. This technique employs the resistence strain gauges in touch of the battery case and to detect the minimal change in the battery deformation due to the increasing internal pressure, electrode expantion or intrenal temperature rise. Application of the technique for the study of the effects of the battery processing factors on the battery performance is described taking Ni MH battery as example.

Photoelectrochemical Studies On Nanoporous Tio2/Pan Film Electrode, Min-Sheng Liu, Yan-Zhong Hao, Xue-Bin Qiao, Mai-Zhi Yang, Sheng-Min Cai

Journal of Electrochemistry

The photon to electricity conversion process of nanoporous TiO₂/PAn film electrode was studied in electrolytes with and without redox couple by using the photocurrent action spectra and potential dependence of photocurrent. It is concluded that the nanoporous TiO₂/PAn film electrode has a structure of duplex n type semiconductor layers. The band gap of PAn film is 2.88eV.The TiO₂ nanoporous film electrode modified by PAn can extend the range of optical absorption into visible and infrared region and effectively increase the photocurrent in the visible and infrared region. The photocurrent threshold shifts to>600nm and conversion …

Studies On The Electrode Kinetics Of Electrooxidation Of Mn2+, Wan-Li Hu, Tong Su, Wei Guo, Ding Zhou

Journal of Electrochemistry

The mechanism of electrooxidation of MnSO₄ on Pb Sb As alloy anode was investigated by using rotating disc electrode technique. The results shown that the conditional standard potential of Mn(Ⅲ)/Mn(Ⅱ)in 40% H₂SO₄ is 0.886 4 V.The rate controlling step of electrode process is mixed controlled by charge transfer and diffusion.

Electrochemical Behavior Of Chemically Prepared Ring-Substituted Polyanilines, Li-Zong Dai, Hui-Huang Wu

Journal of Electrochemistry

Polyaniline (PAn) has been known as a promising conducting polymer for technological applications. In research work elecrochemically synthesized PAn has been frequently used since electropolymerization is convenient to prepare the polymer film with controllable thickness or dopingon electrodes. However , the processibility of elecrosynthesized PAn is too poor to produce largearea devices because of its insolubility and infusibility. Recently, therefore, chemical polymerization has attracted a considerable attentionfl-3],  especially suitably derivatized ring substituted (e.g. alkyl or alkoxy) polyanilines have been synthesized, and their appreciable solubility in commonorganic solvents enable the preparation of film on industrial scale by casting. Moreover, emulsionpolymerization reduces …

Study Of Proton Exchange Membrane Fuel Cells(Pemfc), Shan-Hai Ge, Bao-Lian Yi, Hong-Fen Xu, Ming Han, Zhi-Gang Shao

Journal of Electrochemistry

The electrode kinetic parameters for proton exchange membrane fuel cells(PEMFC) were investigated by measuring the relations of cell potential and current density. An experimental stack of PEMFC which can be operated at E cell =0.7V, I =0.55A/cm² steadily is presented, and the effects of electrode structure and operation conditions such as temperature, pressure, humidification, flow rate on the performance of PEMFC are discussed.