Engineering Commons^™

Acid Characteristics Of Dissolved Organic Matter In Wastewater, Jianmin Wang, C. P. Huang, Herbert E. Allen, Luis R. Takiyama, Ira Poesponegoro, Haryanto Poesponegoro, Dan Pirestani

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The presence of dissolved organic matter (DOM) in a wastewater treatment system can significantly affect the uptake of heavy metals by sludge particulates. The characteristics of DOM, its concentration, and the solution pH are important parameters governing the heavy metals uptake reaction. The characteristics of DOM of various wastewater and sludge (primary, secondary, and tertiary) samples collected from four municipal wastewater treatment plants were investigated. Results showed that the dissolution of DOM from sludge is significantly affected by pH and suspended solids concentration. Results also showed that DOM contains two discrete acid groups that are available for metals complexation. The …

Attitude Measurement, Mark A. Stedham, Partha P. Banerjee, Seiji Nishifuji, Shogo Tanaka

Electrical and Computer Engineering Faculty Publications

In many practical situations, it is important to determine and measure the attitude of a particular vehicle, such as a ship, an airplane, a piece of mechanical equipment such as a, crane lifter, or a spacecraft. For this reason, many attitude sensors have been developed with advanced computer and semiconductor technologies. This section first introduces the various attitude sensors with an explanation of their operating principles and then presents several methodologies for attitude measurement and determination, including ships and crane lifters, aircraft, and spacecraft applications.

A Study Of The Fundamental Operations Of A Capillary Driven Heat Transfer Device In Both Normal And Low Gravity Part 1-Liquid Slug Formation In Low Gravity, Jeffrey S. Allen, Kevin P. Hallinan, Jack Lekan

Mechanical and Aerospace Engineering Faculty Publications

Research has been conducted to observe the operation of a capillary pumped loop (CPL) in both normal and low gravity environments in order to ascertain the causes of device failure. The failures of capillary pumped heat transport devices in low gravity; specifically; evaporator dryout, are not understood and the available data for analyzing the failures is incomplete.

To observe failure in these devices an idealized experimental CPL was configured for testing in both a normal-gravity and a low-gravity environment. The experimental test loop was constructed completely of Pyrex tubing to allow for visualization of system operations. Heat was added to …

Effects Of Temperature, Water Hardness, And Recirculation On Copper Corrosion, Brian R. Weiss

Electronic Theses and Dissertations

In previous work, the effects of water quality have been shown to influence the formation of scale from copper corrosion. A general understanding of the effects of water quality on copper corrosion have been difficult to obtain because of complex interactions of water quality variables on copper corrosion in different water supply systems. The objective of this study was to examine the effects of temperature and water hardness on copper corrosion occurring in a household water supply system. The effects of recirculation were also studied in concurrence with the above water quality parameters. Electrochemical corrosion testing and corrosion by -product …

Compensation Of Processes With Time Delays, Thomas Heeg, Aidan O'Dwyer

Conference papers

Methods which allow comparisons in the use of PI and PID controller strategies for the control of first order lag plus time delay processes (FOLPD) are worthy of investigation because of the relative lack of work done in this area. In this paper, strategies for comparing performance and robustness for a PI or PID controlled FOLPD process are analysed and designed. The use of different PID controller structures for processes with time delay is also worth considering in detail. Various PID controller structures are compared by means of servo and regulator time responses, Bode plots and Nyquist plots.

The Identification And Control Of Processes With Time Delay, Susan Carr, Aidan O'Dwyer

Conference papers

The identification of the frequency response and process model parameters of systems with time delay using frequency domain techniques is evaluated in this paper. The performance of both Fourier Transform and Power Spectral Density techniques is considered. The benefits of employing modern model based design and delay compensation techniques, based on the identified process data, are assessed.

Gaseous Cah Removal By Biofiltration In Presence And Absence Of A Nonionic Surfactant, J. O. Kim, Purush K. Terkonda, S. D. Lee

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The objectives of this study were to investigate the biodegradation of gaseous trichloroethylene (TCE) and tetrachloroethylene (PCE) in an activated carbon biofilter inoculated with phenol-oxidizing microorganisms and to study the effect of surfactant concentration below its critical micelle concentration (CMC) on the removal efficiency of TCE or PCE. For the enhanced biofiltration, a biodegradable nonionic surfactant was added to biofilters. The investigation was conducted using two specially built stainless steel biofilters, one for TCE and the other for PCE. The removal efficiency of gaseous TCE was 100% at a residence time of 7 min and its average inlet concentration of …

Evaluation Of Implicit Numerical Methods For Building Energy Simulation, Michael Crowley, Saleem Hashmi

Articles

The stability of numerical methods used for finite-difference thermal modelling of buildings is discussed. A known instability in a commonly used process is described and alternative numerical methods with suitable stability properties are identified. With a view to selecting the optimum numerical method, the building energy simulation problem is characterized mathematically and appropriate implicit solvers are compared on the basis of accuracy and computational effort using a building related test problem prepared for this purpose. A recently developed numerical method with the necessary strong stability is found to possess higher computational efficiency than methods frequently used in this application and …

Strategies For Evaluating Software Usability, Ronan Fitzpatrick

Articles

This paper presents a usage analysis and taxonomy of methods which are used to evaluate the usability of computer systems. To accommodate the analysis and taxonomy, a matrix of strategies which can be used for effective usability evaluation is presented. Such an analysis, taxonomy and strategies support human-computer interaction (HCI) professionals who have the responsibility for ensuring computer system usability. The strategies outlined are named Virtual Engineering, Soft Modelling, Hard Review and Real World. This paper also uses a composite set of existing popular generic evaluation methods which can be used as part of these strategies. The methods used are …

Euroconstruction Report 1, Louis Gunnigan, Trevor Orr

Reports

This report was prepared on behalf of the Construction Industry Federation as Ireland’s initial contribution to the Leonardo da Vinci Project: Euroconstruction.

The report is divided into 3 sections.

Section 1 concentrates on the recent and likely future changes in the structure of the Irish construction market and the impact of these changes on project management and project financing. The recent growth of the industry is documented and predictions for the future of the industry in Ireland are summarised. The conclusions reached show that an increased involvement in the financing of public projects is required from the private sector if …

Functional Radionuclide Imaging Algorithm Based On The Appended Curve Deconvolution Technique And Its Use In The Diagnosis Of Renovascular Hypertension, İrfan Karagöz, Hi̇kmet Bayhan

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, a new method called the pixel basis functional radionuclide imaging (PBFRI) algorithm based on the appended curve deconvolution technique, in order to be able to increase the medical diagnostic capability of a conventional gamma camera, is presented together with the clinical results. In the PBFRI method, retention function of each pixel is obtained from the renograms and cardiac curves generated by processing the filtered segments of the kidney and heart, using a special deconvolution method. The deconvolution operation is done by using the Fourier transform technique. High frequency artifacts presented by the Fourier transform are removed by …

Embankment Construction Using Shale, Tommy C. Hopkins, Tony L. Beckham

Kentucky Transportation Center Research Report

Shales have been used extensively in the construction of highway embankments, and other earthen structures, because of the vast amounts of these materials located in many areas of the country and the lack of economical and alternate available materials. Because shales exhibit a wide range of engineering properties and behaviors, many problems have occurred. Numerous shale embankment failures have occurred generally some 1 to 10 years after construction. Settlements of 1 to 3 feet (0.3 - 0.9 m) have been observed in many old embankments and required numerous asphaltic overlays. Shale embankments that settle continuously have been observed to fail …

Nebraska Summary 287: John Deere 6210 Powrquad Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 288: John Deere 6310 Syncroplus Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 278: Massey Ferguson 4345, 4245 And 4243 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 286: John Deere 6110 Powrquad Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 320: Massey Ferguson 8270 And 8170 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 290: John Deere 6410 Powrquad Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 321: Massey Ferguson 8280 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1805: Kubota M9000dt Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1774: Zetor 10641/Zetor 10741 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1895: Case Ih Cx 70/Case Ih C 70/Mccormick C 70 & Cx 70 & Cx 75 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1896: Case Ih Cx 80/Case Ih C80/Mccormick C 80 & Cx 80 & Cx 85 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1898: Case Ih Cx 90/Case Ih C90/Mccormick C 90 & Cx 90 & Cx 95 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1801: New Holland Ts100 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1800: Challenger Mt 465 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1770: Challenger Mt 655 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1896: Case Ih Cx 80/C 80 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1898: Ih Cx 90/C 90 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Sr‐ And Ni‐Doped Lacoo3 And Lafeo3 Perovskites: New Cathode Materials For Solid‐Oxide Fuel Cells, Kevin Huang, Hee Y. Lee, John B. Goodenough

Faculty Publications

An improved cathode material for a solid‐oxide fuel cell would be a mixed electronic and oxide‐ion conductor with a good catalytic activity for oxygen reduction at an operating temperature T _op ≥ 700°C and a thermal expansion matched to that of the electrolyte and interconnect. We report on the properties of Sr‐ and Ni‐doped LaCoO₃ and LaFeO₃ perovskites that meet these criteria. Single‐phase regions were determined by X‐ray diffraction, and thermogravimetric analysis measurements were used to obtain the temperatures above which oxygen loss, and hence oxide‐ion conductivity, occurs. The conductivity and Seebeck measurements indicate the coexistence of both …