Engineering Commons^™

Advanced Manufacturing Applications Of Cost Estimating Techniques For Metal Cutting Industries, Zubair Hamid

Theses

In this work, different cost estimating techniques in metal cutting industry were studied. A basic understanding of estimation concepts were given. The typical breakdown of total cost was also given and discussed in details. Practical applications of cost estimating is studied. The effect of different parameters which relate to the lot sizes or quantity were discussed. All these results show that total cost is minimum at a point which is called least cost point, after that cost increases because of the addition of extra resources, in terms of man, machine and increase in administrative expenses.

Biodegradation Of Tnt (2,4,6-Trinitrotoluene), Jin Lou

Theses

This study summaries the results of various methods treating 2,4,6-trinitrotoluene (TNT). Review of available literatures revealed that the most commonly used techniques in full-scale plant for TNT removal are chemical oxidation and carbon adsorption.

From economic point of view, the biological treatment system will be much more cost-effective. Various methods for improving the efficiency of biological system treating TNT wastewater were developed in the laboratory. Current laboratory results show that by isolating appropriate microorganisms under adequate conditions, TNT wastes can be degraded successfully.

At the some time, some pretreatment technologies are recommended in this study for improving the performance of …

Design For Manufacturability (Computer Aided Optimum Gear Design), Narayan R. Mareddy

Theses

Design for manufacturing has design as the first manufacturing step. It is important to recognize the importance of design clubing with manufacturing to reduce the production, set up time. In this thesis concepts of design, manufacturing and four different ways of bringing design and manufacturing together are discussed in detail.

As there are large number of variables in the gear rating equations, it is very difficult to achieve optimum design by manual methods unless an extensive trial and error process is carried out. An algorithm has been developed which allows rapid convergence to the optimum gear design. The algorithm has …

A Color Petri Net Simulation Tool, Sanjaykumar V. Desai

Theses

A user friendly, modular and highly interactive graphical tool for drawing, editing and simulating color Petri nets is developed. The tool is designed to model concurrent and interlocked systems, such as flexible manufacturing systems, communication protocols and computer systems. A Color Petri Net(CPN) has a more concise graphical system representation than a standard Petri net, because net entities in CPN carry information. The CPNS(Color Petri Net Simulation) tool simulates a net having conflicts, reveals deadlocks, and creates a log file with the state history of the system yielding performance measures.

Comparison Of Timing Jitter In External And Monolithic Cavity Mode-Locked Semiconductor Lasers, Dennis J. Derickson, P. A. Morton, J. E. Bowers, R. L. Thornton

Electrical Engineering

A comprehensive timing jitter comparison is made for mode-locked semiconductor lasers using active, passive, and hybrid mode-locking techniques in both external and monolithic cavity configurations. Active mode locking gives the lowest residual rms timing jitter of 65 fs (150 Hz-50 MHz), followed by the hybrid and passive mode-locking techniques. It is found that monolithic cavity devices with all active waveguides have higher timing jitter levels than the comparable external cavity case.

Limits Of Limit Equilibrium And Finite Element Techniques Applied To Cracked Debris Dams On Collapsing Foundations, Stanley Soliday Jr.

Dissertations and Theses

Limits of slope stability, limit equilibrium methods, and of the finite element code FEADAM are reached in the application of these methods to the problem of cracked dams constructed on collapsing soils.

Utilizing a generic dam, various classic slope stability approaches are tested as possible dam slope failure mechanisms. Slope stability methods are rejected as a way to accurately define and quantify the collapse problem. As a result of this work a block rotation mode of collapse is postulated. Then the finite element method (FEM) is used to try to define and quantify the collapse problem. The FEM is applied …

Ignoring Interprocessor Communication During Scheduling, Chintamani M. Patwardhan

Dissertations and Theses

The goal of parallel processing is to achieve high speed computing by partitioning a program into concurrent parts, assigning them in an efficient way to the available processors, scheduling the program and then executing the concurrent parts simultaneously. In the past researchers have combined the allocation of tasks in a program and scheduling of those tasks into one operation. We define scheduling as a process of efficiently assigning priorities to the already allocated tasks in a program. Assignment of priorities is important in cases when more than one task at a processor is ready for execution. Most heuristics for scheduling …

A Multiple Coupled Microstrip Transmission Line Model For High-Speed Vlsi Interconnect Simulation, Lawrence Stevan Uzelac

Dissertations and Theses

A model is presented which incorporates the advantages of a mixed mode simulation to characterize transmission line behavior in multiple coupled Transmission line systems. The model is intended for use by digital circuit designers who wish to be able to obtain accurate transmission line behavior for complex digital systems for which continuous time simulation tools such as SPICE would be time prohibitive.

The model uses a transverse electromagnetic wave approximation to obtain solutions to the basic transmission line equations. A modal analysis technique is used to solve for the attenuation and propagation constants for the transmission lines. Modal analysis done …

Method For Gaseous Component Indentification With #3 Polymeric Film, Edward S. Kolesar Jr.

AFIT Patents

A sensor having an interdigitated gate electrode field effect transistor (IGEFET) coupled to an electron beam evaporated copper phthalocyanine thin film is used to selectively detect parts-per-billion concentration levels of atmosphere contaminants such as nitrogen dioxide (NO₂) and diisopropyl methylphosphonate (DIMP). The sensor is excited with a voltage pulse, and its time- and frequency-domain response are examined. The envelopes of the magnitude of the normalized difference frequency spectrums reveal features which unambiguously distinguish the NO₂ and DIMP exposures.

An Investigation Of Digital Microprocessor Algorithms In Active Suspension Systems, Toby L. Mcclellan

Graduate Research Papers

The need for knowledge and understanding of these systems at the technician level will increase dramatically as other manufacturers develop production systems in the 90's. Current technical literature on the subject of active and semi-active suspension systems does not well explain a major aspect of these systems, the origin and nature of the control algorithms used. A review of 30 articles and technical papers, and a title search of over 300 others discovered only 2 vague presentations of the actual control logic used in such systems. Furthermore, the control information that was printed was presented in terms of Laplace transforms …

Migrating A C-Based Cad Tool To An Object-Oriented Database/C++ Environment: Conversion Costs And Performance Analysis, Mark A. Roth, Timothy M. Jacobs

AFIT Documents

his paper examines the potential of object-oriented databases to support complex design applications. To do this we migrated the Magic very large scale integrated (VLSI) circuit design tool written in the C language to a new environment in which Magic's existing file management code is replaced with a C++ language interface to the commercial object-oriented database management system (OODBMS) product Object Store. In our initial implementation we found the performance of this tool as implemented on the OODBMS to be marginally faster than the tool as currently implemented with a flat file system in several critical areas. Increased functionality, including …

Spectral And Spatial Quantum Efficiency Of Algaas/Gaas And Ingaas/Inp Pin Photodiodes, Steven Alan Tabor

Dissertations and Theses

This thesis reports a novel system capable of testing both the spectral responsivity and the spatial quantum efficiency uniformity of heterostructure photodiodes using optical fiber coupled radiation. Testing was performed to confirm device specifications. This study undertakes to quantify the spectral bandwidth of an AlGaAs I GaAs double heterostructure photodiode and two InGaAs I InP double heterostructure PIN photodiodes at D.C., through the use of spatial scanning. The spatial scanning was done using lasers at 670 nm, 780 nm, 848 nm, 1300 nm, and 1550 nm, coupled through singlemode optical fiber. The AlGaAs I GaAs material system covers the 600 …

Unsteady Flow In Vertical, Converging Tubes, Hamid Johari, William W. Durgin

Office of the Provost Scholarship

The discharge of liquids from vertical tubes with various contraction geometries was studied via the unsteady Bernoulli equation. The temporal variations of the exit velocity and fluid level in the tube were found from the numerical integration of nonlinear differential equations. Sudden, quadratic, and exponential contraction geometries were considered. For inlet to exit area ratios greater than two, the flow initially accelerates to a maximum speed and then it decelerates for the geometries studied. The exponential contraction has the shortest discharge time. The solutions also reveal that the largest possible velocity and the shortest discharge time are achieved in a …

Acuta Enews December 1991, Vol. 20, No. 12

ACUTA Newsletters

In This Issue

10-XXX gives occasion for fraud

President's Message

YaleNET, a variety of services

Think ahead to prevent fraud

MOREnet links 12 campuses

Positions available

Part 1 Of The Mcmaster University Laboratory Test Program On Brick Veneer/Steel Stud Wall Systems, Robert G. Drysdale, Normand Breton

CCFSS Library (1939 - present)

The behaviour of steel stud backup wall panels subjected to lateral loads was investigated experimentally and analytically. In addition, various steel stud to track connections were investigated experimentally.

The experimental work consisted of the fabrication and testing of 109 steel stud to track connections. Thirty-two full size steel stud backup wall panels were also tested. Some of the panels were braced with various types of commonly used steel bridging while others were braced with gypsum board sheathing or Styrofoam SM insulation. Twelve beam tests were also performed in order to establish the flexural bending capacity of the steel studs tested. …

Illustrative Examples Based On The Asce Standard Specification For The Design Of Cold-Formed Stainless Steel Structural Members, Shin-Hua Lin, Wei-Wen Yu, Theodore V. Galambos

CCFSS Library (1939 - present)

PREFACE During the past four years, two methods were developed for the design of stainless steel structural members at the University of Missouri-Rolla with consultation of Professor T. V. Galambos at the University of Minnesota. One of the methods is based on the load and resistance factor design (LRFD) and the other is based on the allowable stress design (ASD). Both design methods are now included in the new ASCE Standard 8-90, Specification for the Design of Cold-Formed Stainless Steel Structural Members. At the September 21, 1990 meeting of the Control Group of the ASCE Stainless Steel Cold-Formed Section Standards …

Evaluation Of Torsional Provisions In Seismic Codes, Anil K. Chopra, Rakesh K. Goel

Civil and Environmental Engineering

The effects of plan asymmetry on the earthquake response of code-designed, one-story systems are identified with the objective of evaluating how well these effects are represented by torsional provisions in building codes. The earthquake-induced deformations and ductility demands on resisting elements of asymmetric-plan systems, designed according to several different codes, are compared with their values if the system plan were symmetric. The presented results demonstrate that the design eccentricity in building codes should be modified in order to achieve the desirable goal of similar ductility demands on asymmetric-plan and symmetric-plan systems. The design eccentricity should be defined differently for elastic …

9th Conference On Senior Engineering Design Projects, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 9th Conference on Senior Engineering Design Projects was held on December 10, 1991 at the College of Engineering and applied Sciences on the Parkview Campus of Western Michigan University. The college sponsors the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

Composite Damage Assessment Employing An Optical Neural Network Processor And An Embedded Fiberoptic Sensor Array, Barry G. Grossman, Xing Gao, Michael H. Thursby

Electrical Engineering and Computer Science Faculty Publications

This paper discusses a novel approach for composite damage assessment with potential for DoD, NASA, and commercial applications. We have analyzed and modeled a two dimensional composite damage assessment system for real-time monitoring and determination of damage location in a composite structure. The system combines two techniques: a fiberoptic strain sensor array and an optical neural network processor. A two dimensional fiberoptic sensor array embedded in the composite structure during the manufacturing process can be used to detect changes in the mechanical strain distribution caused by subsequent damage to the structure. The optical processor, a pre-trained Kohonen neural network, has …

Evolution And Impact Of Changes Of Technological Development In Some Of The French Manufacturing Organizations, T S Nagabhushana

IIMB Management Review

No abstract provided.

Computerized Aircraft Accident Investigation: Federal Aviation Administration Aviation Safety Inspectors' Perceptions, David S. Ryan

Master's Theses - Daytona Beach

The purpose of this study was to solicit the perceptions of Federal Aviation Administration (FAA) Aviation Safety Inspectors (ASIs) on the use of a personal computer in the aircraft accident investigation process. A descriptive study survey questionnaire was used to collect the data for the study, which was sent to 150 FAA ASIs. The data collected supported the hypothesis that aircraft accident investigators think the use of a computer will help them with accident report form completion, managing the accident data collected, and in determining the factors contributing to an accident. Furthermore, the data supported the hypothesis that the use …

The Calendar - December 1991, Nova University

The Calendar

No abstract provided.

Seat Belt Attitudinal Survey, Kenneth R. Agent

Kentucky Transportation Center Research Report

The primary objective of this study was to conduct a statewide survey to determine public opinion of a statewide mandatory safety belt law. The survey was conducted so that opinions could be analyzed by areas of the state. The method used to separate the state into geographic regions was to use the boundaries of the 15 Area Development Districts (ADD). A mail survey was conducted with 1,000 questionnaires sent to each ADD. A response rate of 51 percent was obtained.

The respondents were in favor of a statewide law requiring use of safety belts. The statewide percentage in favor of …

An Investigation Of The Floor Attachment Assembly Of A Large Transport Aircraft Seat Subjected To Crash Dynamic Loadings, Mark William Creager

Master's Theses - Daytona Beach

Accident investigations by the National Transportation Safety Board concluded that the passenger seat and restraint systems found in today's aircraft used by the airlines are inadequate to protect the occupant in airplane crashes. Computer models were developed of the seat-track assembly and finite element analyses were performed subjected to crash dynamic loadings. The seat-track interface was modeled with gap elements to accurately model the geometric interaction between the track and seat-track fittings. Results showed large deformations and stresses above yielding in both the seat and track when subjected to accelerations prescribed for certification under the Federal Aviation Administration (FAA) regulations.

High-Resolution Tvd Schemes For The Analysis Of 1. Inviscid Supersonic And Transonic Flows. 2. Viscous Flows With Shock-Induced Separation And Heat Transfer, Mark A. Driver

Theses and Dissertations

Application of TVD schemes to both inviscid and viscous flows is considered. The mathematical and physical bases of TVD schemes are discussed. First and second-order accurate TVD schemes and a second-order accurate Lax- Wendroff scheme are used to compute solutions to the Riemann problem in order to investigate the capability of each to resolve shocks, rarefactions, and contact surfaces. Second-order finite-volume and finite-difference TVD schemes are used to obtain solutions to inviscid supersonic and transonic cascade flow problems. TVD schemes are shown to be superior to the Lax-Wendroff family of schemes for both transient and steady-state computations. TVD methodology is …

Crack Growth Rate Modeling Of A Titanium-Aluminide Alloy Under Thermal-Mechanical Cycling, John J. Pernot

Theses and Dissertations

In this study, a model is developed to predict crack growth rates in a titanium-aluminide alloy under thermal-mechanical fatigue (TMF). This TMF crack growth rate prediction model, which requires only isothermal data to define its parameters, is distinguished from earlier models in two ways. First, it accounts for mechanical-fatigue and environmental crack growth rate contributions while it also considers a retardation mechanism thought to be caused by creep blunting of the crack tip. This is the first study to account for such a retardation mechanism during TMF. The second uniqueness of the model is that its general form can account …

A Comparative Analysis Of Computer End-User Support In The Air Force And Civilian Organizations, Maureen C. Casey, Douglas A. Kveene

Theses and Dissertations

This study compared end-user computing support provided by the Air Force to support provided by civilian organizations with information centers and those without. Factors measured included the end user's demographics, applications used, the effect of computing on perceived confidence, productivity, quality and quantity of output, the importance of various types of support, and satisfaction with the support received from different sources. A survey was administered to 450 Air Force and 265 civilian end users; 416 were returned (response rate of 58.18%). Although there were significant demographic differences between end users, there were no differences in types of support required. Training, …

Software Cost Estimating Models: A Calibration, Validation, And Comparison, Gerald L. Ourada

Theses and Dissertations

This study was a calibration, validation and comparison of four software effort estimation models. The four models evaluated were REVIC, SASET, SEER, and COSTMODL. A historical database was obtained from Space Systems Division, in Los Angeles, and used as the input data. Two software environments were selected, one used to calibrate and validate the models outside their environment of calibration. REVIC and COSTMODL are COCOMO derivatives and were calibrated using Dr. Boehm's procedure. SASET and SEER were found to be un-calibratable for this effort. Accuracy of all the models was significantly low; none of the models performed better against the …

Relative Utility Of Selected Software Requirement Metrics, James H. Byers

Theses and Dissertations

The objective of this study was to determine the relative utility of selected software requirement metrics in assessing the productivity of the software requirements analysis process and the quality of the products of this process. This objective was met by collecting information about the perceptions that practicing software professionals have of the usefulness of various requirement metrics. The study employed a two part methodology. The first part utilized Basili's goal/question/metric paradigm to identify specific goals of the measurement effort and to identify requirement metrics worthy of further investigation. The second part employed a typical research design to gather perceptions that …

Structured Hypermedia Application Development Model (Shadm): A Structured Model For Technical Documentation Application Design, Peter W. Cassell

Theses and Dissertations

This research was conducted to determine how a Royal Australian Air Force technical maintenance publication could be transformed into a task oriented hypermedia application and to develop a model that could be used for future similar transformations. The model was developed following in-depth analysis of the existing USAF F-15E maintenance publication set and validation was conducted using a prototype developed in HyperWriter, a commercial hypermedia product. The prototype model was based around the performance of three maintenance tasks on an aircraft sub-subsystem and incorporated online user access to the necessary support data for task completion. Publication managers, producers, and users …