Engineering Commons^™

Design For Manufacturability : Re-Design Of Pencil Sharpener For The Ease Of Assembly, Amit R. Rathod

Theses

A Design For Manufacturability (DFM) approach is used to analyze the existing design of a pencil sharpener, and to reduce and re-design the parts of pencil sharpener for the ease of assembly. The procedure for the selection of a suitable and economical assembly method is based on the Boothroyd and Dewhurst methods. Analysis of the initial design for manual assembly and re-design for automatic as well as manual assembly is presented. An algorithmic approach for simplified generation of all mechanical assembly sequences and selection of the assembly sequences is presented using De Fazio and Whitney approach.

The Application Of Adaptive Step-Size Control In The Numerical Simulation Of Calcium Release In Vascular Smooth Muscle, Michael John Sydor

Theses

An algorithm for the adaptive control of numerical integration step-size is developed and implemented for the simulation of a three compartment model for Vascular Smooth Muscle. The three compartment model accounts for the simultaneous diffusion of Ca, ⁴⁵Ca, EGTA, Ca-EGTA, and ⁴⁵Ca-EGTA, and is an extension of a two compartment model by Diecke for the simultaneous diffusion of Ca, EGTA, and Ca-EGTA. The addition of the third compartment is to account for the presence of the Sarcoplasmic Reticulum which stores the calcium needed for contraction and is the primary regulator of calcium in the VSM cell. The SR …

Charcoal Catalyzed Ozone Decomposition Of Organic Pollutants In Water, Kin Ho

Theses

A laboratory study has been performed on the wastewater treatment (destruction of organic species in water) using a novel process called Integrated Adsorption-Oxidation (IAO) where activated carbon is being utilized as a catalyst-adsorbent, and ozone as oxidant. The results of ozonation alone on the pollutants in water are also reported to provide a comparison with the adsorption-oxidation scheme in semi-batch reactions. All experiments were conducted at room temperature in a semi-batch reactor using five (water soluble) representative chemicals as pollutants: Aniline, Acetamide, Pyridine, N,N-dimethyl formamide and O-cresol. We also studied two volatile compounds: Trichloroethylene and Chloroform. Phenol was studied in …

Catalytic Oxidation Of Chlorinated Compounds Over Pdo/Al2o3 On A Monolith, Tai-Chiang Yu

Theses

The catalytic oxidation of trichloroethylene(TCE) and dichloromethane (DCM) was investigated over a catalyst containing 4% PdO on Al₂O₃ washcoat and on a cordierite monolith with 400 channels per in². Reactivity and selectivity of the catalyst for the destruction of 200 ppm C₂HCl₃ and 500 ppm CH₂Cl₂ in air was evaluated over the temperature range 250 to 550 °C. This research was conducted in a tubular reactor system at space velocities of 4,000 to 24,000 v/v/hr. It was found that complete oxidation occurs at 500°C for DCM and 550°C for …

3-D Structure Recovery Using Unified Optical Flow Field Approach, Anees Ahmad

Theses

Recovery of the 3-D structure that is characterized by an N^th order factorable and/or non-factorable polynomial equation is studied in this thesis. Analytical tools have been employed to analyze and solve the problem. The solution is based on the direct method, which is derived from the unified optical flow field, which, in turn, is an extension of optical flow to spatial image sequences. Least squares formulation has been employed for optimum estimation. The method used does not require the establishment of point to point correspondence, nor the estimation of the optical flow, as an intermediate step.

The theoretical results …

The Design And Testing Of A Personal Computer Controlled Scanning Acoustic Microscope For Orthopaedic Surgical Applications, Hubert Heinrich Berndt

Theses

This thesis describes scanning acoustic microscopy and ultrasonic image processing to characterize and evaluate materials of known properties, as well as novel materials. This work describes the assembly and testing of a PC based device for nondestructive evaluation of bone materials for usage in orthopaedics research. It includes the identification of some hardware problems and their solution, and it also describes different image processing techniques that have been developed and applied in this work. In a growing number of disciplines it has been discovered that an acoustic microscope can provide new information, especially about the elastic properties of specimens and …

Synthesis And Characterization Of Lpcvd Silicon Carbide Thin Films For X-Ray Lithography, Mahalingam Bhaskaran

Theses

Amorphous silicon carbide thin films were fabricated using low pressure chemical deposition method with a single liquid precursor, di tertiary butyl silane. The films were deposited for a temperature range of 500-850°C and at different pressures ranging from 0.05 to 1 torr. The growth rate of the films deposited at constant pressure of 0.2 torr with a flow rate of 60 sccm, was found to follow an Arrehenius Behavior in the temperature range of 600 - 675°C, yielding an activation energy of 32.5 k cal mol^-1 . IR spectroscopic study showed an absorption peak centered at 780 cm^{-1 …}

Electroretinogram Modeling : Parameter Identification And Intensity-Response Function Fits, Juan J. Castro

Theses

Electroretinography testing provides many useful techniques for clinical diagnosis of the visual system. However, the interpretation of the electroretinogram data involves a great amount of subjectivity. The use of mathematical models and parameter estimation techniques to fit the electroretinogram data supply a non-subjective and more standard way for analysis of the electroretinogram data. Mathematical models provide a way of summarizing the information enclosed in the raw electroretinogram response into a small set of parameters that define the response.

This thesis presents a mathematical model for the electroretinogram response due to light stimuli. It also provides a non-subjective method for obtaining …

The Bandwidth Allocation Of Atm Control By Neural Networks, Jin-Syan Chou

Theses

In this thesis, we develop a neural network method based on Adaptive Resonance Theory to train and control the optimum bandwidth allocation of ATM network. In Broadband Integrated Service Digital Network (BISDN), the Asynchronous Transfer Mode (ATM) is already adopted as the transfer facility by CCITT. ATM is a high-bandwidth, low- delay, fast-packet switching and multiplexing technique. Using ATM technique, we can flexibly rearrange the network and reassign the bandwidth to meet the requirement of all types of services. As an effective optimization method, Genetic Algorithm (GA) is applied to implement the bandwidth allocation of ATM. Then, we use Adaptive …

Androx Implementation Of Nonlinear Filter, Keh-Chao Chu

Theses

Nonlinear filters, such as morphological operations, play an important role in image processing. Several software implementations of nonlinear filters are presented in this thesis. There may exist more than one method to implement a specific operation. The methods used in this thesis are chosen to be most suited for the machine used according to its structure. These most suited methods are also generally best for software implementations on other machines as well. The machine used here is the Androx image computing workstation.

A Process For Implementing Cim In A Small Manufacturing Facility, Tushar R. Desai

Theses

This work is dedicated to small manufacturing enterprises seeking to explore Computer Integrated Manufacturing (CIM) technology, which is the recent trend in the manufacturing world. The main theme of this thesis is to improve productivity, product quality and reliability, and to reduce costs by integrating various discipline in small manufacturing environment, using computer technology.

To achieve this goal, a hypothetical small manufacturing company was chosen as a subject. The typical functional and organizational structures were analyzed and possible problem areas were highlighted. The problems relating to manufacturing process were studied in detail, and possible solutions were proposed to computerize the …

A Modified M/G/1/N System And Its Application, Bernice Annette Figueroa

Theses

We study a single server queueing system with finite buffer, Poisson arrivals and exceptional service requirements for the first customer in each busy period. The system is studied as a Markov Chain and the limiting probability distributions are obtained. The explicit form sorution for the queue length distribution, blocking probability, waiting time distribution as well as the busy period are derived through the Laplace-Stieltjes transform method. These results are then applied to a tandem system with a finite buffer in front of the first station and no intermediate buffer between the two stations. Finally, similar results are obtained for the …

Application Of Non-Imaging Optical Inspection To The Detection Of Pinhole Defects In Latex Condoms, Paul Micha Gelencser

Theses

An optical technique was demonstrated for the detection of pinhole defects in latex condoms. To evaluate the optical inspection concept, a prototype inspection apparatus was constructed. In order to maximize contrast between pinhole transmitted signal and optical signal transmitted through the latex condom material, ultraviolet (u.v.) light of wavelength 253nm has been used. This inspection was performed during rotation of the condom, with the light source inside the condom and the photomultiplier photodetector outside. The form on which the condoms were mounted was made of quartz in order to allow the u.v. light to be transmitted through it.

Background signal …

Load-Deformation Behavior Of Reinforced Fibrous Concrete Beams, Rujun He

Theses

This study deals with the load-deformation behavior of steel fiber reinforced concrete beams.

Theoretical development of moment-curvature and load-deformation relationships is presented in this paper. It is based on the assumption that the failure at a section occurs either when the force equilibrium equation is violated or when the concrete elements start to get crushed in the member. The complete stress-strain relationship of plain fibrous concrete in reference [2] was used in this study.

A special computer program is presented herein to carry out the theoretical studies of load-deformation behavior of simply supported beam under two-point loading. The validity of …

Representing Tolerances In A Geometric Modeller, Chih-Tsung Huang

Theses

Current geometric modeller contains dimension information only. This thesis describes how tolerance can be added to a geometric modeller. The modeller is based on a hybrid design of the Constructive Solid Geometry (CSG) scheme and Boundary Representation (B-Rep). Various tolerances based on the ANSI standard are considered.

The Neural Network Based Control System For Dynamic Channel Allocation In Pcn Communications, Ching-Yao Huang

Theses

A neural network based control system (NNCS) is adopted in this paper to conduct the channel allocation task in the personal communication networks (PCN). Binary adaptive resonance theory (ART-1) that was modified for pattern matching and provided the corresponding responses is selected as the basic algorithm for the system. Digital portable radio technology can provide reliable access to high quality wireless service for many users. Low power transmission requirement and small cell size configuration that can support more users and diverse services than cellular radio system are the attractive attributes of PCN. Assigning multiple time slots to a user in …

Automatic Infrared And Visual Inspection Of Solder Joints On Pcbs, Jiang Huang

Theses

This thesis reports the research results of automatic inspection of solder joints on printed circuit boards (PCBs). The previous work on this regard has been advanced significantly in the following three aspects. With the application of some microlens and the principle of geometric optics solder joints of real size are inspected in this work instead of larger simulation solder joints in the previous work. A new set of features is formulated and used for infrared inspection. Consequently, better results have been achieved in this work.

Reasonably good results demonstrate the capability of infrared inspection of solder joints on PCBs. Once …

Direct Recovering Of Composite Surface Using Uoff, Zhesheng Huang

Theses

The research work reported in the thesis is motivated by the problem raised in the computer vision area. It utilizes direct method to recover surface structure of objects in 3-D space from a pair of stereo images. The direct method, compared with optical flow-based approach and feature-based approach, is robust and computationally efficient. However it can only recover planar surface structure so far. A new approach to recover structure from a pair of stereo images based on unified optical flow field (UOFF) is developed recently. It can recover curved surface structure.

In this thesis, the problem of recovering surface structure …

A Cmos Logic Circuit To Reduce Substrate Current/Hot Carrier Effect, Tejinder K. Jaswal

Theses

A new C-MOS NAND and CMOS full adder logic circuits which reduces hot carrier problems are discussed. The application of new circuit lowers the channel electric field in N-MOSFET during switching transient and leads to suppression of the N-MOSFET substrate current. The simulation results shows that about 3.99 and 3.75 times smaller peak substrate current are obtained in C-MOS NAND and adder with new circuit compared to the conventional logic circuits. These logic circuits also gives better noise and shows shorter rise and fall times. The new concept provides highly reliable logic circuits without any change of device structure or …

Brushless Dc Motor Speed Control System With Saturation Nonlinearity, Khawja M. Kamal

Theses

A study of a three-phase, pulse-width modulated, velocity controlled brushless DC motor speed control system is presented. Previous works on brushless DC drive systems could not explain global instability, due to linear approximations. A complete three-phase system model is presented here, along with a simplified single-phase model, which is similar to a conventional DC motor model. The models incorporate saturation nonlinearity. The brushless DC drive system is analyzed and simulated. Special emphasis is laid on the study of the limit-cycle phenomenon, due to saturation nonlinearity. Global instability is accounted for and relevant parameter regions are established for global stability. The …

Expert System For Blown Film Extrusion, Jiachyi Li

Theses

Expert systems and blown film extrusion are two subjects to deal with in this thesis. Expert systems are an aspect of artificial intelligence, or a computer's ability to think. The determination of a suitable expert system for particular problem is an important factor in current societies. Blown film is extruded as a continuous tube which is air cooled, collapsed, and wound onto a roll as a double layer of film. Such film, if heat sealed and perforated, makes a roll of bags. There are many factors that affect blown film extrusion. Therefore, using expert system to evaluate blown film extrusion …

Application Of Expert System For Control Of Heating Distribution Network : A Case Study, Jun Li

Theses

The use of an expert system for the heating distribution network is an application of artificial intelligence to the domain of energy engineering.

The development of an expert system for a heating distribution network is explained. The expert system is implemented through the software Kee. The expert system is used to monitor the heating distribution network, and to complement some functions of the controls such as balancing the system pressure, stabilizing output, in addition to fault diagnosis, system process simulation. It serves also as a medium to system moniting, and operator training. Many other functions will be developed on the …

Workstation Allocation Schemes For Response Time Improvement In A Multiserver Pc Lan, Asit V. Merchant

Theses

Microcomputer Local Area Networks have recently become quite popular. Higher demand in term of number of users who contribute a variable amount of load has led to Multiple File servers in a LAN. As a result of variable load, response time at workstations differ significantly depending not only on total load on the network but also on workstation distribution across servers. The goal of this study is to develop schemes to keep response time as low as possible and constant among workstations. This study is based on minimizing response time and containing it or keeping it constant by distributing workstations …

A Comparative Study Of Image Coding Techniques : Filter Banks Vs. Discrete Cosine Transform, Hosam Fawzi Mutlag

Theses

Subband coding of still image frames using Binomial PR-QMF has been presented in this thesis. Simulation results have shown that the performance of subband coding using a low complexity coder is practically the same as the performance of the industry standard (8 x 8) DCT based image coder.

A low bit rate adaptive video coding technique is also introduced in this thesis. The redundancy within adjacent video frames is exploited by motion compensated interframe prediction. The Motion Compensated Frame Difference (MCFD) signals are filtered by employing Binomial PR-QMF structure into four subbands. Then, the subbands are quantized using an efficient …

Automated Determination Of Air Content In Hardened Concrete, Anita R. Navalurkar

Theses

An automated system was developed for the microscopic determination of air content and the related parameters in hardened concrete using the principles of Image Analysis and Computer Technology. Slices taken from the concrete specimen were viewed through a microscope with 40X magnification. The magnified image of the concrete slice is digitized by an Image Analyzing Software. Methodologies were developed for analysis of the digitized image and determination of air content and the required parameters. The automated system included a motorized positioner which translated microscope stage in a frame by frame sequence so that the whole image is digitized. Several tests …

Evaluation Of Cracking Mechanism In Fiber Reinforced Concrete Subjected To Impulsive Loading, Rajendra K. Navalurkar

Theses

This thesis presents an experimental evaluation of J-Integral for plain and fiber reinforced concrete subjected to impact loading. A computer assisted instrumented Charpy test system was employed in applying the impact loads. Twenty two three point bend specimens with two different notch lengths were tested under impact velocity of 43.29 in/sec. Development and testing of a new fiber optic sensor, for the determination of internal Crack Tip Opening Displacements (CTOD) in concrete is described.

Evaluation of J_IC values from experimental results of this study indicate that J_IC can be characterized as a material constant. The Dynamic value of …

Minimized Test Patterns For Sequential Logic, Chetan Patel

Theses

This thesis presents a novel algorithmic approach which can be used to reduce the total test pattern lengths for testing a sequential logic circuit. Test generation for sequential circuits has long been recognized as a difficult task. Several approaches have been made in the past to solve the problems of test generation stage for sequential circuits but they were either an extension of the classical D-algorithm or based on the random techniques. When number of states of the sequential circuit is larger and the test demands long input sequences, they can be quite ineffective for the test generation. The STALLION …

Synthesis And Characterization Of Boron Nitride Masks For X-Ray Lithography, Venkat Paturi

Theses

Boron nitride thin films were deposited on silicon and fused quartz substrates by low pressure chemical vapor deposition using liquid precursor source consisting of Triethyl amine borane complex over a temperature range of 600-900°C. In the range of 600-800°C, the deposition rate, measured at a constant pressure of 0.35 Torr and flow rate of 30 sccm, was observed to follow an Arrhenius behavior yielding an activation energy of 11 kcal/mol. In the temperature range of 800-900°C, the addition of ammonia to Triethylamineborane complex produced films that are stoichiometric, as estimated by RBS measurements, and hydrogen free as determined by Infrared …

Parallel Implementation Of Spatial Domain Image Processing Algorithms On The Mesh Connected Computer Simulator, Adury Devi Prasad

Theses

The performance of conventional computers in image processing applications is known to be inadequate due to the enormous computational requirements. Almost all image processing applications can be implemented in parallel. This thesis is the parallel implementation of neighborhood averaging and edge detection by the Sobel and Laplacian operators on the Mesh Connected Computer Computer Simulator (MCCS), a package developed at NJIT to study the behavior of SIMD machines. Expressions for speedup, utilization and efficiency have been derived. Suggestions for further improvements that can be incorporated in MCCS and its instruction set have been made.

Analysis And Implementation Of A Navigation System Using Vanishing Points In A Generalized Environment, Rolf Schuster

Theses

The development of accurate sensors is of crucial importance in navigation of mobile autonomous robots. The following master's thesis analyzes the use of vanishing points for robot navigation. Parallel lines in the environment of the robot are used to compute vanishing points which serve as a reference for guiding a robot. To accomplish the navigation tasks, three subtasks are to be performed: detection of straight lines, computation of vanishing points, and robot navigation with vanishing points.

An edge detection algorithm is presented that combines Sobel and Laplacian of Gaussian operators. The algorithm preserves the precision of the Laplacian of Gaussian …