Engineering Commons^™

Bulletin - Fall, 1991, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

An eight page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Acuta Enews October 1991, Vol. 20, No. 10

ACUTA Newsletters

In This Issue

President's message

Wireless alternative to cable

AT&T donates computers

ACUTA budget for 1991-92

Voice messaging is "hit"

Publications Editor profiled

Flexural Behavior Of Web Elements With Openings, Roger A. Laboube, Wei-Wen Yu, Ming-Yang Shan, K. D. Batson

CCFSS Library (1939 - present)

INTRODUCTION The purpose of this research project has been to investigate the flexural behavior of C-shaped members with web openings. Three common industry standard C-sections have been studied as summarized in the First and Second Progress Reports. To date two testing sequences have been completed. Test sequence No.1 investigated sections with web openings fabricated from nominally low yield strength material. Test sequence No.2 examined sections both with and without web openings. Specimens in test sequence No. 2 have nominally higher yield strengths. This report summarizes the test procedure and results of the research to date.

Santa Clara Magazine, Volume 34 Number 1, Fall 1991, Santa Clara University

Santa Clara Magazine

12 - FROM SLAVERY TO SAINTHOOD? With the impending canonization of Pierre Toussaint, many feel the Church is finally beginning to recognize the contributions of its African-American worshippers. By Kathy Daile-Molle '85

18 - AND THEY SAID IT WOULDN'T LAST 4-Remembering Dave 2 Letters to the Editor 4 Santa Clara Today 10 Santa Clara Sports 32 Alumni Class Notes 42 University Calendar Tales of freshman roommates who beat the odds and stayed friends. By Kathryn Bold '81

22 - HISPANIC CALIFORNIANS AND CATHOLIC HIGHER EDUCATION The second of a two-part article featuring the diaries of a Hispanic student who attended …

The Calendar - October 1991, Nova University

The Calendar

No abstract provided.

A Conservation Tillage Educational Program, Elbert C. Dickey, Paul J. Jasa, David P. Shelton

Department of Agricultural and Biological Systems Engineering: Faculty Publications

An educational program was conducted to enhance the adoption of conservation tillage practices in targeted areas to reduce soil erosion and on-farm fuel use. Traditional extension methods such as meetings, field days, demonstrations, and plots were used extensively. In addition, the following nontraditional educational methods were used to achieve project objectives: targeting high priority areas, local program guidance committees, surveys to evaluate perceptions and use of conservation tillage, employment of extension assistants to work in the target areas, use of a rainfall simulator to demonstrate the effectiveness of residue cover in reducing erosion, and small group or "coffee shop" meetings …

Ole Miss Engineer 1991

Ole Miss Engineer

No abstract provided.

Study Of Cathodoluminescence In Semiconductors, Mandakini V. Kale

Electrical & Computer Engineering Theses & Dissertations

Cathodoluminescence in Zn doped GaAs and ZnSe, the materials of interest for electron-beam controlled semiconductor switches, has been investigated. A new diagnostic technique, using telescopic setup of lenses, was developed to study the spatially resolved cathodoluminescence. The setup eliminated the light, other than rays from the sample, parallel to the optical axis, resulting in an enhanced spatial resolution. At high e-beam energies, light was detected, from the Zn layer region in the GaAs. It is proposed to be due to the radiative recombination of electron-hole pairs, created by the e-beam. For the polycrystalline ZnSe no light emission was detected. This …

Linearized Dynamics Of Space Structures With Articulated Appendages, Gopichand Koganti

Mechanical & Aerospace Engineering Theses & Dissertations

The inherent difficulties of the conventional spacecraft design, which first considered the optimization with respect to structural variables and then with respect to control variables, have led to the concept of Controls-Structures Interactive Design. The success of the CSI design of Space structures without articulated appendages has prompted the extension of the CSI design to systems with articulated appendages. The presentation is of two parts, the first part deals with the derivations of the equations of motion and the second part deals with the eigenvalue/vector approximations.

Three approaches, namely: the multibody approach, the finite element based approach with hinge joints …

Experimental Study Of Transition In A Supersonic Free Shear Layer, Rudolph A. King

Mechanical & Aerospace Engineering Theses & Dissertations

The transition behavior of a free shear layer above a cavity with high and low levels of freestream acoustic disturbances has been investigated at Mach 3.5 in the Supersonic Low-Disturbance Pilot Tunnel located at NASA Langley Research Center. Schlieren photography, mean pitot pressure data, and hot-wire surveys were used to detect transition locations. The transition Reynolds numbers obtained were between Re_Tr = 3.6 x 10⁵ and 5.3 x 10⁵ in good agreement with conventional ("noisy") wind tunnel results. The study indicated that the effects of a decrease in freestream noise on Re_Tr were minimal but, as …

An Experimental Investigation Of Composite Sensors For Crack Length Measurement, Manickam Ramasamy

Mechanical & Aerospace Engineering Theses & Dissertations

Structural defects such as cracks can cause catastrophic failure in engineering components or structures. There are many techniques to measure the crack growth in materials and are commercially available. In this thesis, bondable crack length measurement gages have been investigated and these gages give electrical signal as the output and measure the crack length continuously. Silver paint, nickel powder impregnated epoxy and carbon powder impregnated polymer composite gages are investigated and tests are conducted by resistance measurement method with simple instrumentation and by potential drop method with a constant current output source. Rectangular shape gages have been investigated and as …

Finite Element Frequency Domain Solution Of Nonlinear Panel Flutter With Temperature Effects And Fatigue Life Analysis, David Yongxiang Xue

Mechanical & Aerospace Engineering Theses & Dissertations

A frequency domain solution method for nonlinear panel flutter with thermal effects using a consistent finite element formulation has been developed. The von Karman nonlinear strain-displacement relation is used to account for large deflections, the quasi-steady first-order piston theory is employed for aerodynamic loading and the quasi-steady thermal stress theory is applied for the thermal stresses with a given change of the temperature distribution, ΔΤ (x, y, z). The equation of motion under a combined thermal-aerodynamic loading can be mathematically separated into two equations and then solved in sequence: (1) thermal-aerodynamic postbuckling and (2) limit-cycle oscillation. The Newton-Raphson iteration technique …

Evaluation Of Pe Film, James E. Funk, Theodore Hopwood Ii, Christopher M. Oberst

Kentucky Transportation Center Research Report

Laboratory tests were conducted to assess the ability of a 3-mil thick adhesive-backed polyethylene film (Polymask) to protect vehicle paint finishes from acid-rain damage. The laboratory tests employed conditions known to be relevant to actual service conditions including: 1) automotive paints of various colors, 2) simulated acid-rain solutions (of pH values from 2.2 to 5.5), and 3) service temperatures (120 to 160 °F). Laboratory tests included cyclic evaporation and soak tests similar to those employed in a previous series of tests for Toyota (1). Cyclic evaporation tests were performed for 12 cycles and the soak tests were performed for 5 …

Value Of Research, Kentucky Transportation Center

Kentucky Transportation Center Research Report

Transportation research in Kentucky has been ongoing since 1914. The Road Materials Testing Laboratory was established that year at the University of Kentucky. Operation of the laboratory commenced in 1915 under the guidance of Professor D.V. Terrell who later became Dean of the College of Engineering. Dean Terrell often noted that the purpose of research was not to save money but to make it go farther. Public funding was never sufficient to accomplish all that various agency personnel considered essential nor that which the public deemed necessary and research was conducted most often for the purpose of gaining more for …

Center For Computer And Information Sciences Master Of Science In Computer Computer Science Fall Courses 1991, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Instrumentation And Control For A Microprocessor-Based Coronary Perfusion System, Daniel L. Priester

Master's Theses (1922-2009) Access restricted to Marquette Campus

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Area Conservation Tillage Meetings-A Successful Educational Program, Elbert C. Dickey, Paul J. Jasa, David P. Shelton, Robert Grisso, Keith Glewen

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Interest in conservation tillage began to increase in the early 1980s, and farmers wanted information on how to adopt and manage various tillage and planting systems. Area conservation tillage meetings were developed by the University of Nebraska Cooperative Extension to provide the needed information on a regional basis. Local extension agents and Soil Conservation Service personnel helped extension specialists determine program content. The multidisciplinary meetings included farmer presentations and allowed space and time for commercial exhibits. About 80% of respondents to meeting evaluations indicated they planned to change their tillage practices as a result of the information presented.

Dna Mapping Algorithms: Clone Sequencing, Judith H. Lewis, Will Gillett

All Computer Science and Engineering Research

The DNA restriction mapping problem can be abstracted to the Shortest Common Matching String problem by viewing the restriction fragment lengths as symbols and the clones as bags. The Shortest Common Matching String problem can be decomposed into the Bag Sequencing problem and the Symbol Sequencing problem. All three of these problems have bene shown to be NP-hard. Rhee has proposed a family of greedy algorithms to compute polynomial time approximations to the Bag Sequencing problem, which produced surprisingly good performance results on abstracted data. In the test data generated by Rhee for pragmatic analysis, the symbols in bags represented …

Domain Limitations And Interface Requirements For Expert Developed Knowledge Based Systems, Bernard Lee Lewis

Engineering Management & Systems Engineering Theses & Dissertations

The expanded use of graphical, case-based and object oriented techniques in expert systems creation has made it more practical for domain experts to develop their own applications. This thesis focuses on the elements necessary in an expert/developer interface and looks at various forms and techniques that exemplify such an approach. The spreadsheet metaphor is used for an interface or managed set of interfaces that a domain expert can use in building his own expert system or prototype. criteria are established for such interfaces and recent commercial offerings that make expert-created knowledge-bases more practical are reviewed for techniques that qualify. Approaches …

Thermal Characterization Of Carbon Monoxide Oxidation Catalysts Using Thermogravimetric Analysts And Differential Scanning Calorimetry, Rene A. Bartgis

Chemistry & Biochemistry Theses & Dissertations

Catalysts composed of platinum and/or palladium on tin (IV) oxide supports, with and without silica gel, as well as catalysts composed of gold on manganese oxide, have been developed for the recombination of carbon monoxide and oxygen to form carbon dioxide for use in carbon dioxide lasers. A thermogravimetric method and a differential scanning calorimetric method have been developed for the thermal characterization of these catalysts. The mass loss data and the enthalpy changes determined as the catalysts lost water were then related to existing activity data for these catalysts. No relationship was found between the thermal data and the …

Radiation From The Cylindrical Dielectric Taper, Tor-Odd Hoydal

Theses

The radiation problem of the cylindrical dielectric taper, excited by the HE₁₁ dominant mode, is studied. A theoretical model and a numerical investigation into the radiation characteristics of such a tapered structure are presented. The model is based upon the combination of the exact modal field solutions for a step profile cylindrical dielectric waveguide, Local Mode Theory, and the Equivalence Principle for the determination of equivalent current densities.

The far-zone radiation field is considered to be the summation of the fields produced by two radiative components in the dielectric rod/conical structure: The "aperture" of the uniform dielectric rod at …

Stability Of Hot Mix Asphalt With Petroleum Contaminated Soils, De-Rong Lobo Huang

Theses

One of the most effective ways of reducing petroleum contaminated soil is to use it in the production of hot mix asphalt. Both asphalt cement and petroleum contaminates have similar chemical properties. Therefore, The contaminates will be locked within the asphalt matrix without potential leaching.

The six different petroleum contaminate soil samples from New Jersey were used in this research. Since those samples have different physical properties (such as moisture content, specific gravity, plastic limit, liquid limit, grain size distribution) and chemical properties( such as concentration of the contaminate, and type of contaminates) the maximum amount of petroleum contaminated soil …

Deconvolution Applications In Arterial Dynamics, Shanthi Ganesan

Theses

This thesis deals with the computation of the Arterial Impulse Response Function by deconvolving aortic pressure and flow signals in time domain. Several methods have been developed in the past to obtain a solution for the convolution integral. These are (1) Transform method, and (2) Numerical Approximation methods : a. Conventional method b. Relaxation methods.

These methods have been applied in the past to the RC network model and it was found to work well. In this thesis, the methods are applied to data from more realistic models and also on data obtained from dogs. The model considered is a …

Bio-Mechanics Of The Hip Joint And The Engineering Considerations In The Treatment Of Unstable Intertrochanteric Fractures, Manoj D. Nene

Theses

Numerous previous attempts have been made to determine the magnitude and the direction of forces acting on the hip joint. The mechanism of femoral neck fractures and the frequently occurring failure of its internal fixation has led engineers to analyze the forces involved. An unstable intertrochanteric fracture is one which lacks continuity of the bone cortex on the opposing surfaces of the proximal and digital fragments. A mathematical model is created in this study to examine the 135° and 150° nail plate. The results give an approximate estimation of stresses on the two plates. A 3D finite element model of …

Knowledge Based Designing Of Broadband Coaxial Cable Networks, Tauqir Hameed

Theses

The objective of this research was to build a broadband coaxial cable network. One of the basic requirement of a network is the physical link transmission medium. For the purposes of this research, broadband coaxial cable was chosen as a physical medium of data communication. The approach taken in this research was to divide network design into three main steps. In the first step, the decision on topology of the network was determined. Both Star and Minimum Spanning Tree topologies were used and then the Esau-Williams Algorithm was employed to minimize the cable length. In the second step, various signal …

Sol-Gel Derived, Air-Baked Indium And Tin Oxide Films, Douglas M. Mattox

Materials Science and Engineering Faculty Research & Creative Works

A sol-gel derived, transparent, electrically conducting tin-doped In₂O₃ film system has been developed which only requires air baking. The films approximate the properties of sputtered and hot-sprayed films but are simpler and less expensive to apply by dipping and spinning procedures. Substrate sodium interference was seen to be minimal. © 1991.

Composite Stock Cutting Through Simulated Annealing, Pipatpong Poshyanonda, Cihan H. Dagli

Computer Science Technical Reports

This paper explores the use of Simulated Annealing as an optimization technique for the problem Composite Material Stock Cutting. The shapes are not constrained to be convex polygons or even regular shapes. However, due to the composite nature of the material, the orientation of the shapes on the stock is restricted. For placements of various shapes, we show how to determine a cost function, annealing parameters, and performance.

Composite Stock Cutting Through Simulated Annealing, Pipatpong Poshyanonda, Cihan H. Dagli

Computer Science Technical Reports

This paper explores the use of Simulated Annealing as an optimization technique for the problem Composite Material Stock Cutting. The shapes are not constrained to be convex polygons or even regular shapes. However, due to the composite nature of the material, the orientation of the shapes on the stock is restricted. For placements of various shapes, we show how to determine a cost function, annealing parameters, and performance.

Temperature Dependence Of Optical Properties Of Gaas, Huade Yao, Paul G. Snyder, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

Pseudodielectric functions (ε) = (ε₁) + i (ε₂) of GaAs were measured by spectroscopic ellipsometry (SE), in the range of 1.W.45 eV, at temperatures from room temperature (RT) to ~610 ° C. A very clean, smooth surface was obtained by first growing an epitaxial layer of GaAs on a GaAs substrate and immediately capping it with a protective layer of arsenic. The cap prevented surface oxidation during transport to the measurement chamber, where it was evaporated under ultrahigh vacuum at ~350 °C. Room-temperature SE results from this surface are in good agreement with those in the …