Engineering Commons^™

Safety Effectiveness Of Pedestrian Crossing Enhancements, Christopher M. Monsere, Miguel Figliozzi, Sirisha Kothuri, Ali Razmpa, Daniel R. Hazel

Civil and Environmental Engineering Faculty Publications and Presentations

Over the last decade, the Oregon DOT and other agencies have systematically implemented many pedestrian crossing enhancements (PCEs) across the state. This study explored the safety performance of these enhanced crossing in Oregon. Detailed data were collected on 191 crossings. Supplemental data items included crossing location information, route characteristics, surrounding land use and crossing enhancement descriptions. Pedestrian volume at the crossing locations was a highly desirable but unavailable data element. To characterize pedestrian activity, a method was developed to estimate ranges for pedestrian crosswalk activity levels based on the land use classification at the census block level and the presence …

Utilizing High Resolution Bus Gps Data To Visualize And Identify Congestion Hot-Spots In Urban, Nicholas B. Stoll, Travis B. Glick, Miguel Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Congestion and travel delay on urban roadways can influence the roadways’ operating costs and service attractiveness. This research used high-resolution bus data to examine sources of delay on urban arterials. A set of tools was created to help visualize trends in bus behavior and movement; these tools allowed larger traffic trends to be visualized along urban corridors and streets. With buses as probes and examining aggregated bus behavior, contoured speed plots were used to understand the behavior of roadways outside the zone of influence of bus stops. Speed plots were used to discover trends and travel patterns with only a …

Development Of A Pedestrian Demand Estimation Tool, Kelly Clifton, Patrick Allen Singleton, Christopher D. Muhs, Robert J. Schneider

Civil and Environmental Engineering Faculty Publications and Presentations

Most research on walking behavior has focused on mode choice or walk-trip frequency. In contrast, this study is one of the first to analyze the destination choice behaviors of pedestrians. Using about 4,500 walk trips from a 2011 household travel survey in the Portland, OR, region, we estimated multinomial logit pedestrian destination choice models for six trip purposes. Independent variables included terms for impedance (walk-trip distance); size (employment by type, households); supportive pedestrian environments (parks, a pedestrian index of the environment variable called PIE); barriers to walking (terrain, industrial-type employment); and traveler characteristics. Unique to this study was the use …

Toward A Spatial-Temporal Measure Of Land-Use Mix, Steven R. Gehrke, Kelly Clifton

Civil and Environmental Engineering Faculty Publications and Presentations

Urban planning and public-health research has long been interested in the connection between land-use mix and travel. Interest from urban planners stems from the potential of transportation efficiency gains achieved by an increased land-use mix and subsequent shortening of trip lengths; whereas, public-health research advocates an increased land-use mix as an effective policy for facilitating greater physical activity. Yet, despite the transportation, land-use, and health benefits related to improving land-use mix and the extent of topical attention given by researchers, no consensus has been reached regarding the magnitude of its effect on travel. This absence of agreement may largely be …

Development Of A Pedestrian Demand Estimation Tool: A Destination Choice Model, Christopher D. Muhs, Kelly Clifton, Patrick Allen Singleton, Robert J. Schneider

Civil and Environmental Engineering Faculty Publications and Presentations

There is growing support for improvements to the quality of the walking environment, including more investments to promote pedestrian travel. Planners, engineers, and others seek improved tools to estimate pedestrian demand that are sensitive to environmental and demographic factors at the appropriate scale in order to aid policy-relevant issues like air quality, public health, and smart allocation of infrastructure and other resources. Further, in the travel demand forecasting realm, tools of this kind are difficult to implement due to the use of spatial scales of analysis that are oriented towards motorized modes, vast data requirements, and computer processing limitations.

To …

A Level-Of-Service Model For Protected Bike Lanes, Nick Foster, Christopher Monsere, Jennifer Dill, Kelly Clifton

Civil and Environmental Engineering Faculty Publications and Presentations

Several methods exist for quantifying the quality of service provided by a roadway from a bicyclist’s perspective; however, many of these models do not consider physically protected bike lanes and, of those that do, none is based on empirical data from the US. This is problematic as engineers, planners, and elected officials are increasingly looking to objective performance measures to help guide transportation project design and funding prioritization decisions. This paper addresses this gap by presenting a cumulative logistic model to predict user comfort on protected bike lanes developed from data collected during in-person video surveys. The surveys were conducted …

Modeling And Analyzing The Impact Of Advanced Technologies On Transit Performance Measures In Arterial Corridors, Miguel A. Figliozzi, Wei Feng

Civil and Environmental Engineering Faculty Publications and Presentations

Transportation and transit agencies have implemented advanced technologies like transit signal priority (TSP) and Sydney Coordinated Adaptive Traffic System (SCATS) to reduce travel times and improve reliability. However, due to the lack of detailed empirical data, the joint impact of these factors and improvement strategies on bus travel time has not been studied at the stop-to-stop segment level. With the aim of assessing the performance of an existing TSP/SCATS system, this study had access to a unique set of high-resolution bus and traffic signal data. Novel algorithms and performance measures to measure TSP performance are proposed. Results indicate that a …

Design And Implementation Of Pedestrian And Bicycle-Specific Data Collection Methods In Oregon, Miguel Figliozzi, Christopher Monsere, Krista Nordback, Pamela Johnson, Bryan Philip Blanc

Civil and Environmental Engineering Faculty Publications and Presentations

Although there is a growing need to access accurate and reliable pedestrian and bicycle data, there is no statewide system to collect data or plan future data collection efforts in the state of Oregon. To address these issues this research conducted a comprehensive review of pedestrian and bicycle data collection methods and counting technologies. Oregon data sources were also compiled and AADT estimation techniques were reviewed and applied to Oregon data. A pilot study was conducted to test bicycle and pedestrian counting methods at signalized intersections with 2070 controllers. The report also provides a summary of recommendations regarding factoring methods …

2012 Portland Metropolitan Region Transportation System Performance Report, Robert L. Bertini, Dean George, Matthew Downey

Civil and Environmental Engineering Faculty Publications and Presentations

Our transportation system is a key ingredient in the economy, quality of life and urban fabric of the Portland metropolitan area. It has been stated in the past that it is not possible to manage our transportation system tomorrow unless we understand how it is performing today. In this spirit, Portland State University has been working with regional and statewide partners to develop new capabilities to measure, monitor and track the performance of the transportation system in real time and using archived data sources. We believe that it is possible to leverage these disparate data sources toward providing better transportation …

Improving The Representation Of The Pedestrian Environment In Travel Demand Models, Phase I, Kelly J. Clifton, Patrick Allen Singleton, Christopher Devlin Muhs, Robert J. Schneider, Peter Lagerwey

Civil and Environmental Engineering Faculty Publications and Presentations

There is growing support for improvements to the quality of the walking environment, including more investments to promote pedestrian travel. Metropolitan planning organizations (MPOs) are improving regional travel demand forecasting models to better represent walking and bicycling and to expand the evaluative capacity of models to address policy-relevant issues like air quality, public health, and the smart allocation of infrastructure and other resources. This report describes an innovative, spatially disaggregate method to integrate walking activity into trip-based travel models. Using data for the Portland, OR, metropolitan area, the method applies trip generation at a new micro-scale spatial unit: a 264-foot-by-264-foot …

Contextual Influences On Trip Generation, Kelly J. Clifton, Kristina Marie Currans, Christopher D. Muhs

Civil and Environmental Engineering Faculty Publications and Presentations

There is national interest in building data that expands upon the existing Institute of Transportation Engineers (ITE) trip generation rates to include sites located in a multi-modal context. Current ITE rates represent travel behavior for development in single lots and uses, primarily measured in low-density suburban areas. Despite evidence that a more compact urban form, access to transit and a greater mix of uses generates fewer and shorter vehicle trips, local governments are often compelled to use current ITE trip generation rates to evaluate transportation impacts and calculate transportation system development charges (TSDCs). This is due to: a) the expense …

Analysis Of Travel Time Reliability For Freight Corridors Connecting The Pacific Northwest, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

A new methodology and algorithms were developed to combine diverse data sources and to estimate the impacts of recurrent and non-recurrent congestion on freight movements’ reliability and delays, costs, and emissions. The results suggest that traditional traffic sensor data tend to underestimate the impacts of congestion on commercial vehicles travel times and variability. This research also shows that congestion is not only detrimental for carriers and shippers costs but also for the planet due to major increases in GHG emissions and for the local community due to large increases in NOx, PM, and other harmful pollutants.

The methodologies developed throughout …

Analyzing And Quantifying The Impact Of Congestion On Ltl Industry Costs And Performance In The Portland Metropolitan Region, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Increased congestion during peak morning and afternoon periods in urban areas is increasing logistics costs. In addition, environmental, social, and political pressures to limit the impacts associated with CO2 emissions are mounting rapidly. A key challenge for transportation agencies and businesses is to improve the efficiency of urban freight and commercial vehicle movements while ensuring environmental quality, livable communities, and economic growth. However, research and policy efforts to analyze and quantify the impacts of congestion and freight public policies on carriers operations and CO2 emissions are hindered by the complexities of vehicle routing problems with time-dependent travel times and the …

A Study Of Headway Maintenance For Bus Routes: Causes And Effects Of “Bus Bunching” In Extensive And Congested Service Areas, Miguel A. Figliozzi, Wu-Chi Feng, Gerardo Lafferriere, Wei Feng

Civil and Environmental Engineering Faculty Publications and Presentations

A healthy and efficient public transit system is indispensable to reduce congestion, emissions, energy consumption, and car dependency in urban areas. The objective of this research is to 1) develop methods to evaluate and visualize bus service reliability for transit agencies in various temporal and spatial aggregation levels; 2) identify the recurrent unreliability trends of bus routes (focusing on high-frequency service periods) and understand their characteristics, causes and effects; and 3) model service times using linear regression models.

This research utilized six months of archived automatic vehicle location (AVL) and automatic passenger count (APC) data from a low-performance route (Route …

Freight Distribution Problems In Congested Urban Areas: Fast And Effective Solution Procedures To Time-Dependent Vehicle Routing Problems, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Congestion is a common phenomenon in all medium to large cities of the world. Reliability of freight movement in urban areas is an important issue to manufacturing or service companies whose operation is based in just-in-time approaches. These companies tend to provide high value or time sensitive products/services. As congestion increases, carriers face increasing challenges to satisfy their time sensitive customers in an economical way. Route designs or schedules which require long computation times or ignore travel time variations will result in inefficient and suboptimal solutions. Poorly designed routes that lead freight vehicles into congested arteries and streets not only …

2007 Portland Metropolitan Region Transportation System Performance Report, Robert Bertini

Civil and Environmental Engineering Faculty Publications and Presentations

Our transportation system is a key ingredient in the economy, quality of life and urban fabric of the Portland metropolitan area. It has been stated in the past that it is not possible to manage our transportation system tomorrow unless we understand how it is performing today. In this spirit, the Portland State University Center for Transportation Studies has been working with regional and statewide partners to develop new capabilities to measure, monitor and track the performance of the transportation system in real time and using archived data sources. We believe that it is possible to leverage these disparate data …

A Strategy For Reducing The Impact Of Driving Under Influence Of Intoxicants In Portland, Oregon, Christopher Monsere, Delia Chi

Civil and Environmental Engineering Faculty Publications and Presentations

Driving under the influence of intoxicants (DUII) applies to operating a vehicle under the influence of any substance that can impair driving performance. Nationally and locally there is a strong desire to reduce the societal impacts of this significant social problem. The trend in U.S. alcohol-related motor vehicle crashes was generally decreasing in the mid to late 1980’s but has remained fairly flat since the early 1990s. In 1982, approximately 60% of all US traffic fatalities were alcohol-related. By 1994, this had decreased to 43% but in the decade that followed it has changed little. In 2005, nearly 39% of …