Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Conference

Discipline
Institution
Keyword
Publication Year
Publication
File Type

Articles 3991 - 4020 of 13031

Full-Text Articles in Engineering

Flexural Strength Of Continuous-Span Z-Purlins With Paired Torsion Braces Using The Direct Strength Method, Michael Seek Nov 2018

Flexural Strength Of Continuous-Span Z-Purlins With Paired Torsion Braces Using The Direct Strength Method, Michael Seek

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

A procedure is presented to calculate the local and distortional flexural buckling strength of continuous span purlins with paired torsion braces using the Direct Strength Method. Displacement compatibility is utilized to determine the forces interacting between the purlin, the flexible diaphragm and the torsion braces. The biaxial bending and torsion effects caused by this interaction are superimposed, and the actual distribution of stresses within the cross section are calculated at critical locations along the span. With this distribution of stresses, a finite strip buckling analysis is performed to determine the local and distortional buckling strength. In current design practice, results …

Go to article

Experimental Investigation Into The Behavior Of Back-To-Back Gapped Built-Up Cold-Formed Steel Channel Sections Under Compression, Krishanu Roy, Tina Chui Huon Ting, Hieng Ho Lau, James B. P. Lim Nov 2018

Experimental Investigation Into The Behavior Of Back-To-Back Gapped Built-Up Cold-Formed Steel Channel Sections Under Compression, Krishanu Roy, Tina Chui Huon Ting, Hieng Ho Lau, James B. P. Lim

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Back-to-back gapped built-up cold-formed steel channel-sections are used as compression members in cold-formed steel structures, such as trusses, space frames and portal frames etc. Because of the complex and non-uniform cross section of the back-to-back gapped built- up cold-formed steel channel columns, it is difficult to calculate the strength of these sections accurately. Current guidance by the direct strength method in the AISI Specification and the Australian/New Zealand Standard doesn’t include the gap between the back-to-back channels, thus not being able to predict the axial capacities of these sections accurately. In the literature, very few results have been reported for …

Go to article

Cyclic Performance And Behavior Characterization Of Steel Deck Sidelap And Framing Connections, S. Torabian, D. Fratamico Nov 2018

Cyclic Performance And Behavior Characterization Of Steel Deck Sidelap And Framing Connections, S. Torabian, D. Fratamico

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

A wide variety of steel deck sidelaps and framing connections have been experimentally studied to characterize the cyclic performance required in seismic evaluation of steel deck diaphragms. This study intends to provide cyclic test results of common steel deck connections including screw nestable and top arc seam sidelaps; and powder actuated fasteners, arc spot weld, and arc seam weld framing connections. A total of 24 sidelap and 36 framing connection tests have been performed in the Thin-Walled Structures Laboratory at Johns Hopkins University by NBM Technologies. The connection test results have been used to parameterize a nonlinear hysteretic spring element …

Go to article

Screw And Pin Fastener Tests For Cold-Formed Steel, Brian S. Wilson, Fredrick R. Rutz, James R. Harris Nov 2018

Screw And Pin Fastener Tests For Cold-Formed Steel, Brian S. Wilson, Fredrick R. Rutz, James R. Harris

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Because of limited available information on strength and ease of installation of specific fasteners for a particular application to a steel deck diaphragm, a preliminary testing program comparing the shear strength of commercially available screws and gas-actuated shot pins was conducted by J. R. Harris and Company at the University of Colorado Denver in 2018. A test was designed to explore the behavior and capacity of various fasteners, securing two and three pieces of sheet steel of various thicknesses together. Specimens were fabricated and load tested, with the sheet steel pieces in tension, so the fasteners were subject to shear. …

Go to article

Bearing Strength Of Untightened Double-Shear Bolted Connections In Cold-Formed Steel Construction, Refat Bhuiyan, Lip H. Teh Nov 2018

Bearing Strength Of Untightened Double-Shear Bolted Connections In Cold-Formed Steel Construction, Refat Bhuiyan, Lip H. Teh

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper presents the experimental investigation of cold-formed steel double-shear bolted connections where both the bolt head and the nut are not in contact with the outer sheets. The inner sheet of each specimen is not constrained from out-of-plane distortion or bulging downstream of the bolt, and fails in bearing. Based on a series of tests involving specimens having bolt diameters ranging from 12 to 16 mm and sheet thicknesses ranging from 1.5 to 3.0 mm, it has been found that the absence of out-of-plane constraint in untightened bolted connections leads to much lower bearing capacities than predicted by the …

Go to article

Sdi Steel Deck On Cold-Formed Steel Framing Design Manual, Thomas Sputo Nov 2018

Sdi Steel Deck On Cold-Formed Steel Framing Design Manual, Thomas Sputo

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Go to article

Transverse Shear Stiffness Of Bolted Cold-Formed Steel Storage Rack Upright Frames With Channel Bracing Members, Nima Talebian, Benoit P. Gilbert, Hassan Karampour Nov 2018

Transverse Shear Stiffness Of Bolted Cold-Formed Steel Storage Rack Upright Frames With Channel Bracing Members, Nima Talebian, Benoit P. Gilbert, Hassan Karampour

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Accurately evaluating the transverse shear stiffness of cold-formed steel storage rack upright frames is crucial to calculate the frame elastic buckling load, perform earthquake design and serviceability checks. This is especially essential for high-bay racks, which are subjected to large second-order effects, and racks supporting the building enclosure, which are exposed to transverse wind loads. The shear behaviour of these frames is poorly understood and experimental testing is usually required to measure their stiffness. Previous studies have shown that Finite Element Analyses (FEA), solely using beam elements, fail to reproduce experimental test results and may overestimate the transverse shear stiffness …

Go to article

Biaxial Bending Of Cold-Formed Steel Storage Rack Uprights – Part Ii: Design Methods, Nima Talebian, Benoit P. Gilbert, Cao Hung Pham, Hassan Karampour Nov 2018

Biaxial Bending Of Cold-Formed Steel Storage Rack Uprights – Part Ii: Design Methods, Nima Talebian, Benoit P. Gilbert, Cao Hung Pham, Hassan Karampour

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper uses the results from the parametric studies reported in the companion paper to verify the accuracy of different forms of published direct strength method (DSM) equations. They consist of the classical DSM equations and considering the inelastic reserve capacity into these equations, with and without an extended range of the cross-sectional slenderness. The verifications are made for local and distortional buckling modes. Results show that for all investigated buckling modes, the DSM results in better predictions when the inelastic reserve capacity is considered. The appropriate form of the DSM to predict the biaxial capacity of unperforated cold-formed steel …

Go to article

Finite-Element Analysis Of The Eaves Joint Of Cold-Formed Steel Portal Frames Having Single Channel-Sections, Pouya Pouladi, John Ronaldson, George Charles Clifton, Jason Maxwell Ingham, Andrzej M. Wrzesien, Paul Milewski, James B. P. Lim Nov 2018

Finite-Element Analysis Of The Eaves Joint Of Cold-Formed Steel Portal Frames Having Single Channel-Sections, Pouya Pouladi, John Ronaldson, George Charles Clifton, Jason Maxwell Ingham, Andrzej M. Wrzesien, Paul Milewski, James B. P. Lim

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

A finite element model is described for the eaves joint of a cold-formed steel portal frame that comprises a single channel section for the column and rafters eaves connections. The members are connected to the brackets through both screws and bolts. Such a joint detail is commonly used in practice in New Zealand and Australia, where the function of the screws is to prevent slip of the joint during frame erection since the bolt holes are detailed for nominal clearance. The results of the finite element model are compared against two experimental test results. In both, the critical mode of …

Go to article

Influence Of Fire On The Shear Capacity Of Cold-Formed Steel Framed Shear Walls, M. S. Hoehler, B. Andres Nov 2018

Influence Of Fire On The Shear Capacity Of Cold-Formed Steel Framed Shear Walls, M. S. Hoehler, B. Andres

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper presents experimental investigations of the performance of common lateral force-resisting systems used in cold-formed steel construction under sequential thermal (fire) and mechanical (earthquake) loading. Wall specimens with gypsum-sheet steel composite sheathing, Oriented Strand Board (OSB) sheathing, or steel strap bracing were tested. The results demonstrate that the lateral capacity of wall systems can be reduced by exposure to fire. Additionally, fire performance of wall systems can be affected by pre-damage to the fire-resistive components that provide fire protection to these walls. The results are useful for fire compartmentation design when significant lateral deformation of a building is anticipated …

Go to article

Finite Element Modeling And Validation Of Steel Sheathed Cold-Formed Steel Framed Shear Walls, Amanpreet Singh, Tara C. Hutchinson Nov 2018

Finite Element Modeling And Validation Of Steel Sheathed Cold-Formed Steel Framed Shear Walls, Amanpreet Singh, Tara C. Hutchinson

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The objective of this paper is to validate the concept of utilizing a truss-element based finite element model for capturing the in-plane cyclic response of steel sheathed cold-formed steel (CFS) framed shear wall. The model is developed within the OpenSees finite element platform. Steel sheathed CFS shear walls show shear buckling of their sheathing as a tension field develops. This inelastic behavior of the shear walls is replicated by using the Pinching4 material for truss elements acting along the tension field. Importantly, the model employs beam-column elements for framing members, rotational springs for representing frame stiffness and vertical springs for …

Go to article

Performance Of Cold-Formed Steel Shear Walls With Frame Blocking And Double-Sheathing, Robert Rizk, Vincent Briere, Veronica Santos, Colin A. Rogers Nov 2018

Performance Of Cold-Formed Steel Shear Walls With Frame Blocking And Double-Sheathing, Robert Rizk, Vincent Briere, Veronica Santos, Colin A. Rogers

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper summarizes a laboratory based research program on blocked and double-sheathed cold-formed steel framed shear walls. The intent was to develop walls whose in-plane shear resistance exceeds that of configurations currently listed in the AISI S400 Standard. The results showed that the frame blocking can be used in the construction of walls whose resistance is at the limit of that found in AISI S400; however, the blocking will not adequately restrain the framing members if thicker sheathing is used. An approach was needed to minimize the effect of the eccentric loading caused by the sheathing and to account for …

Go to article

Cloud Oriented Additive Technology Use For Fast Prototype Development, Betim Shabani, Vladimir Dukovski Oct 2018

Cloud Oriented Additive Technology Use For Fast Prototype Development, Betim Shabani, Vladimir Dukovski

UBT International Conference

Digitalization has already affected every segment of the industry and especially manufacturing. Based on market requires that are more specific and faster than ever, there is a need to use some of the online platform packages called Cloud Manufacturing (CM). CM operate through the digital data then here comes the expression CAD models or in particular STL files that are currently adequate for Additive Technologies (AT). On the other hand, there is a rapid increase in the measurement aspects via non-contact forms (3D scanners) where their data are stored in various digital formats: IGES, OBJ, PLY, etc.). Those formats can …

Go to article

The Importance Of Cad/Cae Systems In Development Of Product Design And Process Of Optimization, Fatmir Azemi, Xhemajl Mehmeti, Bekim Maloku Oct 2018

The Importance Of Cad/Cae Systems In Development Of Product Design And Process Of Optimization, Fatmir Azemi, Xhemajl Mehmeti, Bekim Maloku

UBT International Conference

Computer Aided Design (CAD) and Computer Aided Engineering (CAE) are the most important technology tools that today designers are using in development of product (design and in process of optimization). Thus, this study is carried out to present the importance of CAD/CAE system on process of design and process of optimization of spur gear. The paper presents the usage of CAD system for modeling parts and CAE software for analysis of stress-strain of spur gear and the results of calculation of pair spur-gears that it used in the gearbox transmission of the bucket wheel excavator located in “Bardhi i Madh …

Go to article

Adaptation Of Wood Processing Engineers To New Technologies, Ramadan Topuzi, Arben Bejtja Oct 2018

Adaptation Of Wood Processing Engineers To New Technologies, Ramadan Topuzi, Arben Bejtja

UBT International Conference

New technologies have recently got a rapid and wide spread. They consist of softwares, systems and advanced engineering machinery, but not limited to these. In the furniture manufacturing industry they have found a wide application for their own specific nature. Wood Processing Engineers, given their university education, have a very important role applying their knowledge in the use of technologies. Today CAD CAM systems are becoming part of furniture design and manufacturing through digitally commanded machineries. The problem faced is the qualified staff for the use of these systems and machineries. This requires scientific preparation and training of specialists on …

Go to article

Investigation Of Production Of Brick With Waste Coal Powder Additive, Mehmedi Vehbi Gökçe, Semiha Akçaözoğlu, Besian Sinani Oct 2018

Investigation Of Production Of Brick With Waste Coal Powder Additive, Mehmedi Vehbi Gökçe, Semiha Akçaözoğlu, Besian Sinani

UBT International Conference

Wastes in coal quarries and coal power plants are significant issues. Coal washing plant tailings as waste coal powder is one of these issues. Today, their ecological and economical utilization, control and management are of main subjects for ongoing researches throughout the world. On the other hand, researchers still carry out intense investigations on the production of lightweight and sustainable products for construction industry. In Turkey, approximately 20 coal mines and 1 coal power plant do have coal washing plant. In this study, waste coal powder obtained from Soma, Manisa were replaced with clay obtained from Niğde Kolsuz Region in …

Go to article

Multithreading Technique Improvement In Processing Client Server Communication By Utilizing Object Oriented Language, Eda Tabaku, Kliv Shapllo, Senada Bushati Oct 2018

Multithreading Technique Improvement In Processing Client Server Communication By Utilizing Object Oriented Language, Eda Tabaku, Kliv Shapllo, Senada Bushati

UBT International Conference

A comparison of an application’s performance, when a program is executed through multiple threads and only a thread to complete a specified task by using Java techniques. In this paper will be expounded how a Java programmer can profit by technology facilities. How to create a program that executes in a parallel way, that solves independent tasks not one after the other, but all at the same time. The application that is developed(the environment used is Eclipse) aims to speed up the time needed to download images from a specific website, but it is flexible for downloading images also from …

Go to article

Performance Analysis Of Java Persistence Api Providers, Besart Pllana Oct 2018

Performance Analysis Of Java Persistence Api Providers, Besart Pllana

UBT International Conference

Nowadays, fast and accurate access to data is very important. Usually data is managed and processed through software applications. In recent years, the most preferred programming model by most application developers is Object Oriented Programming (OOP) where data is represented through objects. These data must be persistent and therefore needs to be stored, and storage can be done on a variety of databases. The most common databases are Relational Database Management Systems (RDBMS). While persistence of objects in RDBMS is limited by object-relational mismatch which is the inconsistency of the direct interaction between two components based on different approaches, OOP …

Go to article

The Moving Object Reflected Under Matlab Test-Bench (Simulation Model Through Buit-In Functions), Virtyt Lesha, Jozef Bushati, Dea Strica Oct 2018

The Moving Object Reflected Under Matlab Test-Bench (Simulation Model Through Buit-In Functions), Virtyt Lesha, Jozef Bushati, Dea Strica

UBT International Conference

Digital image processing is an area that finds many applications in three-dimensional graphics. One of the subjects considered in image processing is detection of moving objects. In this paper, we have analyzed the performance of an algorithm that detects a moving object. The performance relates to the speed of moving object during a pre-determined time interval. The methodology supports Matlab integrated with built-in functions. Specifically, as input of the simulation model is a video material containing moving objects. The model reads a video file presenting moving objects; after the model is executed in Matlab, the output emits moving objects associated …

Go to article

Designing A Controller Via Simulated Annealing, Zemerart Asani, Selvet Rexhepi Oct 2018

Designing A Controller Via Simulated Annealing, Zemerart Asani, Selvet Rexhepi

UBT International Conference

With Proportional-Integral-Derivative (PID) controllers being widely used in industry for optimum solutions. Optimization of the PID controller is an important problem in Control Engineering. Therefore, in this paper work we have implemented Simulated Annealing to tune the controller parameters. Optimizing the controller parameters on the basis of the Simulated Annealing algorithm, based on criteria defined using an objective function, allows us to find optimal solutions for the controller parameters that give us minimum error. In terms of performance, the PID controller designed with Simulated Annealing gives us great results with regard to the rise time, settling time, overshoot and steady-state …

Go to article

Nb-Iot: A Network Slice For Massive Iot, Xhafer Krasniqi Oct 2018

Nb-Iot: A Network Slice For Massive Iot, Xhafer Krasniqi

UBT International Conference

Network virtualisation is a concept that has been around for some time now, but the concept of network slicing is more recent and only started to be mentioned in the context of 5G. In essence, network slicing is a specific form of network virtualisation that enables sharing of physical resources by multiple logical network slices used to serve different applications and use cases. One such a use case would be to allocate network resources to small things, e.g. sensors and very low power consumption objects. To allow these small objects access to network resources or to a slice of such …

Go to article

Small-Scale Physical Modelling Of Slope Failures In Sands, M. Tasevska, B. Susinov, J. Josifovski Oct 2018

Small-Scale Physical Modelling Of Slope Failures In Sands, M. Tasevska, B. Susinov, J. Josifovski

UBT International Conference

This paper deals with small-scale physical and numerical calculation of slope stability. The aim is to define the critical slope angle at which failure occurs. The slope is constructed from material used in tailings dam construction. Many laboratory tests have been made to determine the physical and mechanical properties of the soil. The analyzed results show that the material is classified as silty sand. The first physical model refers to infinite slope with 45° slope angle under loaded conditions which represent an upslope extension. The second model wasn’t subjected to an external load, but raised upward to increase the slope …

Go to article

Water Losses Management In Mitrovica Region, Faruk Hajrizi, Izet Ibrahimi Oct 2018

Water Losses Management In Mitrovica Region, Faruk Hajrizi, Izet Ibrahimi

UBT International Conference

The purpose of this paper is to reduce water losses by presenting the unregistered customer situation, the number and where they are mainly distributed. In the context of analyzing the commercial and technical losses of the water in the Mitrovica region, a project for the reduction of water losses was devised. Financial support for project realization is ensured by the project funded by the Luxembourg Government for the Regional and Water Company Mitrovica, which has enabled to implement a project with significant activities to reduce water losses. During the project development we undertook site visits, field work evaluations were conducted …

Go to article

Review Of Cloud Migration Strategies And Providers – An Iaas Migration Strategy, Florinda Imeri, Agon Memeti Oct 2018

Review Of Cloud Migration Strategies And Providers – An Iaas Migration Strategy, Florinda Imeri, Agon Memeti

UBT International Conference

Companies are addressing the Cloud Computing issue more actively recently, as a part of a move towards a more agile and flexible IT infrastructure since benefitting from an IT infrastructure that is flexible, scalable, high-performance and up-to-date is no longer a luxury or the exception to a rule. The issue they address is “Which is the best strategy?” Of course, this is not a simple issue given that the cloud can impact an organization’s application picture across several dimensions. When an organizations made the decision to consider cloud services for its application or infrastructure deployment, it’s important to understand the …

Go to article

Simulation Based Optimisation Of Ground Crews: Case Of A Regional Airport, Blaz Rodic, Alenka Baggia Oct 2018

Simulation Based Optimisation Of Ground Crews: Case Of A Regional Airport, Blaz Rodic, Alenka Baggia

UBT International Conference

Paper presents the simulation models built within an airport ground crew scheduling automatization project at a regional airport. Our goal was to develop robust ground crew task scheduling and shift generation algorithms that would improve on existing heuristic rules. We have utilized simulation modeling to develop and validate the algorithms, starting with a model of the existing scheduling process coded and visualized in spreadsheet software and ending with a hybrid Discrete Event and Agent Based model used for the visualization and verification of the optimized processes. Explicit and tacit expert knowledge was recorded through meetings with airport personnel managers and …

Go to article

The Relationship Between Teamwork Knowledge And Teamwork Behavior, Jeeun Yi, Glenn E. Littlepage Oct 2018

The Relationship Between Teamwork Knowledge And Teamwork Behavior, Jeeun Yi, Glenn E. Littlepage

River Cities Industrial and Organizational Psychology Conference

Many organizations utilize a team-focused work structure in the workplace. Researchers have studied how working as a team can improve organizational outcomes such as productivity and employee satisfaction (Katzenbach & Smith, 1993). However, not all teams make positive outcomes (Hackman, 1998). Previous research has shown that effective teamwork can facilitate group and organizational effectiveness (Salas, Stagl, Burke, & Goodwin, 2007). Various models of teamwork process have been developed (Marks, Mathieu, & Zaccaro, 2001; Rousseau, Aube, & Savoie, 2006; Salas, Sims, & Burke, 2005). A meta-analysis found a consistent relationship between the ten dimensions of teamwork identified by Marks et al. …

Go to article

An Implementation Of Weighted Least Squares Method In Central Bank Twitter Accounts Grew Prediction, Goran Bjelobaba, Ana Savic, Radosav Veselinovic, Hana Stefanovic Oct 2018

An Implementation Of Weighted Least Squares Method In Central Bank Twitter Accounts Grew Prediction, Goran Bjelobaba, Ana Savic, Radosav Veselinovic, Hana Stefanovic

UBT International Conference

This paper presents some advantages of using social media and social networks as an efficient way of Central Banks communication with target audience. The statistics given in this paper presents some leading banks based on number of followers on Twitter in 2018, showing that Indonesia’s Central Bank has more Twitter followers than any other monetary authority, beating out the Banco de Mexico, Federal Reserve, European Central Bank and Reserve Bank of India. In this paper some prediction of number of Twitter followers in Central Bank communication is also contributed, based on Weighted Least Squares method. An algorithm is implemented in …

Go to article

Efficiency Of Calculating Gcd Through Computer With Help Of Modified Euclidean Algorithm, Emin Emini, Azir Jusufi, Ruhada Emini Oct 2018

Efficiency Of Calculating Gcd Through Computer With Help Of Modified Euclidean Algorithm, Emin Emini, Azir Jusufi, Ruhada Emini

UBT International Conference

Euclid’s algorithm remains to be the most efficient method for finding greatest common divisor of two full numbers. By using the meaning of congruences this research paper will make a modification in the note of the Euclid’s algorithm. Here are discussed both classic and modified methods, by putting appropriate codes and observe the duration of the calculation through the computer.

Go to article

Energy Efficiency For A Farm Company In The Po Valley: Nzefc – Nearly Zero Energy Farm Company, Kliton Bylykbashi Oct 2018

Energy Efficiency For A Farm Company In The Po Valley: Nzefc – Nearly Zero Energy Farm Company, Kliton Bylykbashi

UBT International Conference

Thanks for the cooperation between Sapienza University of Rome and CREA Engineering, the energy consumption of twenty Po Valley’s farms company was diagnosed. The purpose was to determine a Standard Energy Diagnosis Procedure (SEDP), for the agricultural sector. In the case of study below, the farm company has decided to adhere to a process of technological renewal, able to reduce to zero, the energy consumption, related to electricity and agricultural naphtha.

Go to article

Challenges Of Real Estate Appraisers In Kosovo, Marjan Ivezaj Oct 2018

Challenges Of Real Estate Appraisers In Kosovo, Marjan Ivezaj

UBT International Conference

Kosovo is a new country with a goal to integrate quickly into the large family of EU countries. To achieve this, old work practices are changing, and new practices are also being applied in different fields of human activity. Real estate property plays an important role in the process of economic development and is considered as sacred. To be treated this way, the property must be evaluated correctly. Following the examples of EU countries, the Kosovo institutions have organized training, testing and licensing of the first domestic real estate appraisers. The basic data to perform this profession are scarce, incomplete …

Go to article

First Prev Next Last