Engineering Commons^™

Starch Resin Moisture Level Effect On Injection Molding Processability And Molded Part Mechanical Properties With Pure Starch Resin And Polymer Blends, Jordan M. Ellingson

Theses and Dissertations

The current and forecasted global consumption of plastic packaging and products through the 21st century combined with the already reported and growing negative impact of plastics on the environment due to plastics being synthesized from nonrenewable resources that do not biodegrade is of serious concern. However, recent advances in starch technology including the development of thermoplastic starch (TPS) materials —polymers that are both renewable and biodegradable—have brought hope to reducing this impact. The mechanical properties of thermoplastic starch have often been improved by blending with synthetic polymers. One issue that arises with blending is volatilization of the melt from moisture …

Location-Allocation Optimization Of Supply Chain Distribution Networks: A Case Study, Mark Nicholas Helberg

Theses and Dissertations

The location of distribution centers is an important strategic decision in supply chain design, particularly as it relates to service quality, productivity, and profitability of the firm. There has been extensive research performed on distribution location models which require the use of complex algorithms and assumptions that make use of these models difficult in practice for small and medium enterprises (SMEs) that have limited capital and resources. Studies have also failed to capture and quantify potential business results of using more sophisticated methods. In this study, a deterministic and static location-allocation model is designed using a prototype software tool. The …

Influence Of Moving Load, Structure, Temperature Gradient, And Wheel Configuration On Load Transfer Efficiency, Akshay Joshi

Theses and Dissertations

An airport pavement consists of one or more paving materials over the natural subgrade. Pavement design involves the interaction of pavement with vehicular loads and climatic conditions. The Federal Aviation Administration (FAA) uses a mechanistic design procedure, FAARFIELD, for the design of rigid airport pavements. The FAARFIELD (FAA Rigid and Flexible Iterative Elastic Layer Design) procedure is based on layered elastic and three-dimensional finite element-based structural analysis developed to calculate design thicknesses for airfield pavements. The design procedure assumes constant stress-based load transfer efficiency (LTE (S)), of 25% at the joints. Variations in environmental conditions, loading characteristics, type of joint …

Self-Assembling Biomimetic Hydrogels With Bioadhesive Properties For Tissue Engineering Applications, Craig Wiltsey

Theses and Dissertations

Tissue engineering is a multidisciplinary field that aims to repair or regenerate lost or damaged tissues and organs in the body. For the repair of certain load-bearing parts of the body, success of a tissue regeneration strategy can be dependent on scaffold adhesion or integration with the surrounding host tissue to prevent dislocation. One such area is the regeneration of the intervertebral disc (IVD). The objective of this work is to generate a bioadhesive polymer that, in addition to bonding with tissue, can support encapsulated cell survival post-adhesion. Thermosensitive poly(N-isopropylacrylamide) (PNIPAAm) was grafted with chondroitin sulfate (CS) (PNIPAAm-g-CS) and blended …

Film Cooling In Fuel Rich Environments, Jacob J. Robertson

Theses and Dissertations

The ultra compact combustor is a high performance gas turbine design concept that portends reduced weight for future weapons platforms. A natural outcome of the design is the continual presence of fuel-rich air in the turbine component of the engine. Because modern cooling schemes for hot section turbine blades involve injecting cool, oxygen-rich air adjacent to the surface, the potential arises for reaction with the unconsumed radicals in the mainstream ow and augmented heat transfer to the blade. This outcome is contrary to the purpose of film cooling, and can lead to early life-cycle turbine failure. This study examined the …

Development And Characterization Of A Chromotomosynthetic Hyperspectral Imaging System, Randall L. Bostick

Theses and Dissertations

A chromotomosynthetic imaging (CTI) methodology based upon mathematical reconstruction of a set of 2-D spectral projections to collect high-speed (100 Hz) 3-D hyperspectral data cube has been proposed. The CTI system can simultaneously provide usable 3-D spatial and spectral information, provide high-frame rate slitless 1-D spectra, and generate 2-D imagery equivalent to that collected with no prism in the optical system. The wavelength region where prism dispersion is highest (500 nm) is most sensitive to loss of spectral resolution in the presence of systematic error, while wavelengths 600 nm suffer mostly from a shift of the spectral peaks. The quality …

Discrimination Between Child And Adult Forms Using Radar Frequency Signature Analysis, Stephanie R. Keith

Theses and Dissertations

In this thesis we develop a method to discriminate between adult and child radar signatures. In particular, we examine radar data measured from behind a wall, which introduces radar signal attenuation and multipath effects. To investigate the child/adult discrimination problem in a through-wall, multipath scenario, a previously developed free-space human scattering model was expanded to incorporate multiple paths, and the effects of transmission through, and reflections from, walls and ground. The ground was modeled as a perfectly reflecting surface, while the walls were modeled as homogeneous concrete slabs. Twenty-five reflection paths were identified, involving the direct paths, as well as …

Design And Testing Of An H2/O2 Predetonator For A Simulated Rotating Detonation Engine Channel, Stephen J. Miller

Theses and Dissertations

A study is presented on the relationship between a pre-detonator and a detonation channel of an RDE. Testing was conducted on a straight narrow channel made of clear polycarbonate windows connected to an H2/O2 pre-detonator to simulate the RDE initiation scheme and allow for flow visualization. A comparison is made on decoupling distance and wave velocities for a range of pre-detonator designs, inclination angles, equivalence ratios and geometries placed within the simulated channel. Regardless of inclination angle or equivalence ratio the detonation wave decoupled within 25 mm from the pre-detonator exit into the channel. A step change in diameter 25 …

Quantifying The Nonlinear, Anisotropic Material Response Of Spinal Ligaments, Daniel J. Robertson

Theses and Dissertations

Spinal ligaments may be a significant source of chronic back pain, yet they are often disregarded by the clinical community due to a lack of information with regards to their material response, and innervation characteristics. The purpose of this dissertation was to characterize the material response of spinal ligaments and to review their innervation characteristics.


Review of relevant literature revealed that all of the major spinal ligaments are innervated. They cause painful sensations when irritated and provide reflexive control of the deep spinal musculature. As such, including the neurologic implications of iatrogenic ligament damage in the evaluation of surgical procedures …

Covariance Modeling And Space-Time Coding For Mimo Systems, Farnaz Karimdady Sharifabad

Theses and Dissertations

The full spatial covariance matrix of the multiple input multiple-output (MIMO) channel is an important quantity in channel modeling, communication system signal processing, and performance analysis, and therefore this matrix forms the heart of the research outlined in this dissertation. The work begins with an investigation of a generalized framework for computing the full MIMO spatial covariance based on the power angular spectrum (PAS) of the multipath field and the transmit and receive antenna element radiation patterns. For the case of uniform linear arrays and when the PAS clusters satisfy uniform, truncated Gaussian, or truncated Laplacian distributions, a series expansion …

Directional Electric Field Sensing Using Slab Coupled Optical Fiber Sensors, Daniel Theodore Perry

Theses and Dissertations

This thesis provides the details of a multi-axis electric field sensor. The sensing element consists of three slab coupled optical fiber sensors that are combined to allow directional electric field sensing. The packaged three-axis sensor has a small cross-sectional area of 0.5 cm x 0.5 cm achieved by using an x-cut crystal. The method is described that uses a sensitivity-matrix approach to map the measurements to field components. The calibration and testing are described resulting in an average error of 1.5º.This work also includes a description of the packaging method used as well as a thorough analysis of the directional …

Life Cycle Assessment Of Dewatering Routes For Algae-Derived Biodiesel Processes, Daniel O'Connell

Theses and Dissertations

Biodiesel derived from algae is considered a sustainable fuel, but proper downstream processing is necessary to minimize the environmental footprint of this process. Algae is grown in dilute liquid cultures, and achieving the low water contents required for extraction represents one of the greatest challenges for the production of algae derived biodiesel. An analysis of the life cycle emissions associated with harvesting, dewatering, extraction, reaction, and product purification stages for algae biodiesel was performed. This "base case" found 10,500 kg of total emissions per t BD with 96% of those attributed to the spray dryer used for dewatering. Alternative cases …

An Investigation Of The Potential For And Application Of Life Cycle Analysis In The Pharmaceutical Industry, Michael Raymond

Theses and Dissertations

Life cycle assessment offers a unique opportunity to analyze emission reductions across all manufacturing sectors. However, few efforts have been made to apply this method to the pharmaceutical industry. The Toxic Release Inventory is a powerful tool to determine areas of high potential for emissions reductions in industry. When applied to the pharmaceutical industry and coupled with a life cycle assessment, areas for significant environmental improvement become apparent. By examining these trends and exploring a variety of emissions reductions techniques, life cycle emissions in these problem areas may be significantly reduced. These trends demonstrate that manufacture of virgin solvent and …

Investigation Of Longitudinal Joints Between Precast Prestressed Deck Bulb Tee Girders Using Latex Modified Concrete, Clark Baer

Theses and Dissertations

This study investigates the behavior and performance of latex modified concrete (LMC) as a closure pour material with a U-bar connection detail in longitudinal joints between precast deck bulb tee bridge girders with integral concrete decks. The objective was to determine if the joint detail was capable of resisting service shear and moment stresses as well as eliminate the formation of cracks in the joint during fatigue loading. This study tested two large scale reinforced concrete slab specimens measuring 6 ft x 6 ft x 8 in joined together by the longitudinal joint detail in fatigue flexure shear loading. The …

A Model Experiment To Assess The Effects Of Inclusions On Wave Propagation In Soil Media, Thomas Houston

Theses and Dissertations

The research described involved analyzing and characterizing changes to propagating surface waves that are caused by items embedded in a half-space consisting of a soil medium. Numerical and experimentally obtained data of three-dimensional surface wave responses to dynamic impulse loading were examined. Results from this research are compared to changes to surface waves observed in previous investigations that were caused by the presence of voids and inclusions embedded in an elastic half space. The focus of this work was to identify whether the characteristic responses identified in previous studies, based substantially on analytical and finite element analyses results, can be …

Enantioselective Hydrogenation Of Α-Methylcinnamic Acid Over Pd/Al2o3: A Spectroscopic And Kinetic Study, Xiaojing Sun

Theses and Dissertations

Hydrogenation of C=C in α-methylcinnamic acid (MCA) is studied by both kinetic and spectroscopic method. Kinetic study was in a semi-batch reactor. The reaction activity is strongly solvent dependent, while selectivity remains almost unaffected. The reaction is zero order in hydrogen pressure and first order in MCA. The presence of cinchonidine does not affect the reaction order with respect to either acid or H2 pressure, but has a significant inhibiting effect on the reaction rate. The catalyst exhibits stable activity during the reaction with no sign of deactivation. The adsorption and hydrogenation in dichloromethane, isopropanol and 1, 4-Dioxane over the …

Assessment Of Damage In Concrete Structures Using Acoustic Emission, Marwa Abdelrahman

Theses and Dissertations

Evaluating the integrity of concrete structures is an essential procedure to ensure structural safety and durability. Non-destructive testing (NDT) is needed for localizing and characterizing the growing damage in existing structures and also for quality control of new structures. Visual inspection is a commonly used method; however it is not suitable for early detection of damage and very dependent on the experience of the inspector. More research is needed to establish advanced methods for structural health diagnosis such as acoustic emission (AE). Acoustic emission is notably sensitive to active damage in concrete structures. This thesis includes three studies that mainly …

Ultrawideband (Uwb) And Reconfigurable Antennas - New Concepts For Conformal Load Bearing Antenna Structures (Clas), Nicholas Bishop

Theses and Dissertations

Conformal antennas have been increasingly playing an important role in a vast number wireless of communication applications. More specifically, Conformal Load Bearing Antenna Structures (CLAS) have drawn a great deal of interest among researchers and engineers because of their advantages of multiple functionality, e.g. antenna and structure both. The objectives of this thesis are to investigate and design innovative conformal Ultrawideband (UWB) endfire antenna arrays and reconfigurable aperture coupled pixel patch antennas both of which are good candidates for CLAS. First, a broadband VHF-UHF end-fire Yagi-Uda array is proposed for possible air vehicle integration and operation within the 240-465 MHz …

Analysis Of Modulation And Voltage Balancing Strategies For Modular Multilevel Converters, Ryan Blackmon

Theses and Dissertations

Modular multilevel converters are an emerging voltage source converter topology suitable for many applications. The increased utilization of HVDC power transmission solutions has resulted in modular multilevel converters becoming a more common converter type. Other applications include interfacing renewable energy power sources to the grid and motor drives. Modular multilevel converters are beneficial for medium voltage motor drives because the properties of this converter topology, such as low distortion, allow for an efficient motor drive design.

Modular multilevel converters are designed where instead of using 6 IGBTs as in a conventional voltage source converter, numerous low-rated IGBTs are used to …

Polyspectral Signal Analysis Techniques For Condition Based Maintenance Of Helicopter Drive-Train System, Mohammed Ahmed Hassan Mohammed

Theses and Dissertations

For an efficient maintenance of a diverse fleet of air- and rotorcraft, effective condition based maintenance (CBM) must be established based on rotating components monitored vibration signals.

In this dissertation, we present theory and applications of polyspectral signal processing techniques for condition monitoring of critical components in the AH-64D helicopter tail rotor drive train system. Currently available vibration-monitoring tools are mostly built around auto- and cross-power spectral analysis which have limited performance in detecting frequency correlations higher than second order. Studying higher order correlations and their Fourier transforms, higher order spectra, provides more information about the vibration signals which helps …

High Performance Rf Control Devices Using Capacitively Coupled Contacts (C3) Over Iii-N Heterostructures, Faisal Jahan

Theses and Dissertations

RF switches, power limiters and other control devices are essential components of modern RF systems. RF switches are important parts of wireless modules of various devices such as laptops, tablets, cell phones etc. and key components of satellites communication systems, radars, multi-band wireless and aerospace communications, phased array antennas. RF Power limiters (PL) are also important components of RF systems protecting linear amplifiers, detectors etc. from high-power stress. Traditionally, RF switches are fabricated using pin diodes or MEMS, Si MOSFETs or GaAs HEMTs. RF PLs are typically implemented using Schottky or pin-diodes. Traditional devices used in RF switch and PLs …

Impedance Estimation Using Randomized Pulse Width Modulation And Power Converters, William M. Mccoy

Theses and Dissertations

With the adoption of technologies such as alternative energy production, DC power grids, and electric vehicles, the use of high power switching converters has seen a dramatic increase. These power converters serve many rolls such as grid-tied inverters in solar farms, high power charging for electric vehicles, motor drives for industrial applications, and DC links in transmission systems. With the increased prevalence of such devices, it is only natural to attempt to optimize their operation. As with any level of converter, it is desirable to have accurate control over the generated voltages and currents. Often, these controllers implement some form …

Crystal Growth, Characterization And Fabrication Of Cdznte-Based Nuclear Detectors, Ramesh Madhu Krishna

Theses and Dissertations

In today's world, nuclear radiation is seeing more and more use by humanity as time goes on. Nuclear power plants are being built to supply humanity's energy needs, nuclear medical imaging is becoming more popular for diagnosing cancer and other diseases, and control of weapons-grade nuclear materials is becoming more and more important for national security. All of these needs require high-performance nuclear radiation detectors which can accurately measure the type and amount of radiation being used. However, most current radiation detection materials available commercially require extensive cooling, or simply do not function adequately for high-energy gamma-ray emitting nuclear materials …

High Resistivity Amorphous Selenium Alloy Semiconductors For Radiation Detection Applications, Abhinav Mehta

Theses and Dissertations

High resolution noninvasive tools of diagnosis has always derived and enabled scientific and medical research to probe and better understand subtleties of matter, intangible to the human eye. Radiation detection systems are highly dependent on advancements in materials and devices with front-end electronics. There are various discrete applications of these radiation detectors and each application imposes certain requirements so there is no single optimum radiation detector.

Flat panel x-ray imagers have gained high demand in the past decade because of exponential improvement in readout electronics. We have synthesized and investigated stabilized amorphous selenium (a-Se) alloys suitable for high resolution flat …

Stabilizing Controller Design For A Dc Power Distribution System Using A Passivity-Based Stability Criterion, Antonino Riccobono

Theses and Dissertations

In modern times there has been an increased penetration of power electronic converters into Power Distribution Systems. In particular, there has been a strong interest in DC Power Distribution Systems as opposed to conventional AC Power distribution systems. These DC Power Distribution Systems are enabled by power electronics converters. The strong interest is motivated by improvements in power electronic converter technology, like advances in power semiconductor devices, magnetics, control, and converter topologies which have made possible to build high-performance converters at low cost. In many systems, such as cars, ships and airplanes, there has also been a trend towards the …

High Quality Silicon Carbide Epitaxial Growth By Novel Fluorosilane Gas Chemistry For Next Generation High Power Electronics, Tawhid Rana

Theses and Dissertations

High quality, thick (~100µm), low doped and low defect density SiC epitaxial films are essential for high voltage (blocking voltage >10kV), light, compact and reliable next generation power devices. One of the significant challenges in obtaining high quality thick SiC epitaxial films is to restrict/eliminate the Si gas-phase nucleation or aerosol formation during growth. The generated aerosol particles adversely influence growth by reducing the growth rate due to precursor losses, and also affect crystal quality, since the Si droplets are carried to the crystal growth surface. Moreover, liquid aerosol particles adhere to the various reactor parts (parasitic deposition), and contribute …

Experimental And Simulation Predicted Crack Paths For Al-2024-T351 Under Mixed-Mode I/Ii Fatigue Loading Using An Arcan Fixture, Eileen Miller

Theses and Dissertations

Mixed mode I/II fatigue experiments and simulations are performed for an Arcan fixture and a 6.35mm thick Al-2024-T351 specimen. Experiments were performed for Arcan loading angles that gave rise to a range of Mode I/II crack tip conditions from 0 ¡Ü ¦¤KII/¦¤KI ¡Ü ¡Þ. Measurements include the crack paths, loading cycles and maximum and minimum loads for each loading angle. Simulations were performed using three-dimensional finite element analysis (3D-FEA) with 10-noded tetrahedral elements via CRACK3D. While modeling the entire fixture-specimen geometry, a modified version of VCCT with automatic crack tip re-meshing and a maximum normal stress criterion were used to …

Studying On Capacity Fade Mechanisms Of Li-Ion Batteries Through Modeling, Yiling Dai

Theses and Dissertations

Li-ion batteries are promising candidates as power sources for hybrid electric/electric vehicles, as well as storage devices for renewable energies (wind, solar). Longer life batteries are more desirable for large-scale application, which would help lower the capital cost ($/KW) and improve the system stability. However, the aging problem of Li-ion batteries obstructs their fast penetration into these markets. The cell life can be improved based on an in-depth understanding of the fade mechanisms. The purpose of this dissertation is to explore, through a mathematical modeling approach, failure mechanisms of Li-ion batteries.

To study the capacity fade of a LiMn2O4 (LMO) …

Development Of High-Throughput Catalyst Screening For Ammonia Based Selective Catalytic Reduction Of Nitric Oxide With Parallel Analysis Using Fourier Transform Infrared Imaging, Shahriar Salim

Theses and Dissertations

Lean-burn engines, which operate under excess air to fuel ratio offer significant fuel efficiency as well as contribute to the reductions of greenhouse gas emissions. However, lean burn engines produce three main pollutants carbon monoxide (CO), nitrogen oxides (NOx) and unburned or partially burned hydrocarbons (HC), which have detrimental effect on both environment and human life. The conventional three way catalyst (TWC) which was designed to reduce NOx under stoichiometric conditions is not effective under lean-burn engine exhaust condition. Recent studies have shown that copper (Cu) exchanged chabazite (CHA) type zeolites are very promising catalysts for urea or ammonia (NH3) …

Structural Health Monitoring Of Concrete Systems, Matthew Kelly Jones

Theses and Dissertations

Concrete material is widely used around the world for the construction of many infrastructure including highway bridges, residential and commercial building, dams, electric power generation plants, and nuclear power plants. It is therefore practical to continue development of both improved structural systems as well as innovative condition assessment techniques for new and existing concrete structures. This thesis includes two studies which focus on structural health monitoring of concrete systems. The first project deals with performance assessment of an in-situ precast approach slab system and the second is an investigation of acoustic emission (AE) as a condition assessment technique for alkali-silica …