Engineering Commons^™

Inversion Characteristics Of A Buoyant Cylindrical Puck During Oblique Water Impact, Zachary Crawford Smith

Theses and Dissertations

The Apollo Command Module had a tendency to flip over upon impact with the ocean surface after returning from space (9/19 times). In an effort to better characterize the inversion process for future water landing vehicles, experimental results for a simplified buoyant cylindrical puck impacting the water surface are presented. This study focuses on the dependence of inversion upon vertical velocity, horizontal velocity, and the pitch angle of the puck relative to the free surface. High-speed images reveal an asymmetric cavity that forms upon water impact. The asymmetric cavity then collapses, applying a moment, which can be sufficient to invert …

A Comprehensive Python Toolkit For Harnessing Cloud-Based High-Throughput Computing To Support Hydrologic Modeling Workflows, Scott D. Christensen

Theses and Dissertations

Advances in water resources modeling are improving the information that can be supplied to support decisions that affect the safety and sustainability of society, but these advances result in models being more computationally demanding. To facilitate the use of cost- effective computing resources to meet the increased demand through high-throughput computing (HTC) and cloud computing in modeling workflows and web applications, I developed a comprehensive Python toolkit that provides the following features: (1) programmatic access to diverse, dynamically scalable computing resources; (2) a batch scheduling system to queue and dispatch the jobs to the computing resources; (3) data management for …

Perforated Hollow Core Waveguides For Alkali Vapor-Cells And Slow Light Devices, Matthieu C. Giraud Carrier

Theses and Dissertations

The focus of this work is the integration of alkali vapor atomic vapor cells into common silicon wafer microfabrication processes. Such integrated platforms enable the study of quantum coherence effects such as electromagnetically induced transparency, which can in turn be used to demonstrate slow light. Slow and stopped light devices have applications in the optical communications and quantum computing fields. This project uses hollow core anti-resonant reflecting optical waveguides (ARROWs) to build such slow light devices. An explanation of light-matter interactions and the physics of slow light is first provided, as well as a detailed overview of the fabrication process. …

Microfluidic Devices And Biosensors, Long-Fang Tsai

Theses and Dissertations

My research broadly covers various important aspects of microfluidic devices and biosensors. Specifically, this dissertation reports: (1) a new and effective room temperature method of bonding polydimethylsiloxane (PDMS) microfluidics to substrates such as silicon and glass, (2) a new microfluidic pump concept and implementation specifically designed to repeatedly drive a small sample volume (<1 µL) very rapidly (~500 µL/min) through a sensor-containing flow channel to significantly decrease sensor response time through advection-driven rather than diffusion-driven mass transport, (3) use of a new microfluidic material based on polyethylene glycol diacrylate (PEGDA) to implement impedance-based dynamic nanochannel sensors for protein sensing, and (4) an investigation of galvanoluminescence and how to avoid it for conditions important to fluorescence-based dielectrophoresis (DEP) microfluidic biosensors. Over the last decade, the Nordin research group has developed a lab-on-a-chip (LOC) biosensor based on silicon photonic microcantilever arrays integrated with polydimethylsiloxane (PDMS) microfluidics for protein biomarker detection. Integration requires reliable bonding at room temperature with adequate bond strength between the PDMS element and microcantilever sensor substrate. The requirement for a room temperature process is particularly critical because microcantilevers must be individually functionalized with antibody-based receptor molecules prior to bonding and cannot withstand significant heating after functionalization. I developed a new room temperature bonding method using PDMS curing agent as an intermediate adhesive layer. Two curing agents (Sylgard 184 and 182) were compared, as well as an alternate UV curable adhesive (NOA 75). The bond strength of Sylgard 184 was found to be stronger than Sylgard 182 under the same curing conditions. Overnight room temperature curing with Sylgard 184 yields an average burst pressure of 433 kPa, which is more than adequate for many PDMS sensor devices. In contrast, UV curable epoxy required a 12 hour bake at 50 °C to achieve maximum bond strength, which resulted in a burst pressure of only 124 kPa. In many biosensing scenarios it is desirable to use a small sample volume (<1 µL) to detect small analyte concentrations in as short a time as possible. I report a new microfluidic pump to address this need, which we call a reflow pump. It is designed to rapidly pump a small sample volume back and forth in a flow channel. Ultimately, the flow channel would contain functionalized sensor surfaces. The rapid flow permits use of advection-driven mass transport to the sensor surfaces to dramatically reduce sensor response times compared to diffusion-based mass transport. Normally such rapid flow would have the effect of decreasing the fraction of analyte molecules in the volume that would see the sensor surfaces. By configuring the pump to reflow fluid back and forth in the flow channel, the analyte molecules in the small sample volume are used efficiently in that they have many opportunities to make it to the sensor surfaces. I describe a 3-layer PDMS reflow pump that pumps 300 nL of fluid at 500 µL/min for 15 psi actuation pressure, and demonstrate a new two-layer configuration that significantly simplifies pump fabrication. Impedance-based nanochannel sensors operate on the basis of capturing target molecules in nanochannels such that impedance through the nanochannels is increased. While simple in concept, the response time can be quite long (8~12 hours) because the achievable flow rate through a nanochannel is very limited. An approach to dramatically increase the flow rate is to form nanochannels only during impedance measurements, and otherwise have an array of nanotrenches on the surface of a conventional microfluidic flow channel where they are exposed to normal microfluidic flow rates. I have implemented such a dynamic nanochannel approach with a recently-developed microfluidic material based polyethylene glycol diacrylate (PEGDA). I present the design, fabrication, and testing of PEGDA dynamic nanochannel array sensors, and demonstrate an 11.2 % increase in nanochannel impedance when exposed to 7.2 µM bovine serum albumin (BSA) in phosphate buffered saline (PBS). Recently, LOC biosensors for cancer cell detection have been demonstrated based on a combination of dielectrophoresis (DEP) and fluorescence detection. For fluorescence detection it is critical to minimize other sources of light in the system. However, reported devices use a non-noble metal electrode, indium tin oxide (ITO), to take advantage of its optical transparency. Unfortunately, use of non-noble metal electrodes can result in galvanoluminescence (GL) in which the AC voltage applied to the electrodes to achieve DEP causes light emission, which can potentially confound the fluorescence measurement. I designed and fabricated two types of devices to examine and identify conditions that lead to GL. Based on my observations, I have developed a method to avoid GL that involves measuring the impedance spectrum of a DEP device and choosing an operating frequency in the resistive portion of the spectrum. I also measure the emission spectrum of twelve salt solutions, all of which exhibited broadband GL. Finally, I show that in addition to Au, Cr and Ni do not exhibit GL, are therefore potentially attractive as low cost DEP electrode materials.

Sustainable P2 Design For Batch-Based Specialty Chemical Manufacture, Brigitte Pastore

Theses and Dissertations

A case study has been conducted on the reduction of n-methyl-2-pyrrilodone (NMP) solvent waste in the manufacture of polyimide and polybenzoxazole precursors. The evaluation includes the environmental and economic assessment of solvent recovery and substitution strategies. A two-step distillation process proved effective in recovering 95% of the NMP at a purity of 99.97% from the aqueous solvent waste stream. Yearly operating costs were reduced by 83% and total life cycle emissions were reduced by 44%, due to reduction in virgin NMP use and hazardous waste disposal. With capital acquisition, the recovery option would still result in a net present value …

Assessment Of Force Coordination And Neuromuscular Quickness In Healthy Adults, Karen L. Haberland

Theses and Dissertations

Throughout daily life, it is necessary to handle and control innumerable objects. To do so, one’s hands must be precisely regulated. To ensure that an object is effectively manipulated, an individual must apply a grip force (GF) perpendicular to the object’s surface to overcome load force (LF), which acts tangential to the surface to counteract the object’s weight and inertia. Previous studies have shown an elaborate coordination between GF and LF in a variety of object manipulation tasks in healthy populations. This kinetic analysis is clinically important because the GF-LF coordination is shown to deteriorate in aging and neurologically impaired …

Therapeutic Potential Of Catechins And Derivatives For The Prevention Of Alzheimer’S Disease, Shelby Elaine Chastain

Theses and Dissertations

Alzheimer’s disease (AD) is a neurodegenerative condition that affects 1 in 9 people over the age of 65, an estimated 5.4 million Americans. It is the only disease among the top 10 that cannot be prevented, cured, or treated. Based on the lack of a viable therapeutic for the prevention or cure of AD, it is vital that therapeutic research for AD continues. AD is characterized by the deposition of extracellular neuritic plaques comprised of insoluble amyloid-β (Aβ) fibrils. These plaques are formed from the amyloidogenic aggregation of Aβ monomer, generated from the cleavage of the amyloid precursor protein (APP) …

Optimizing Cobalt Carbide Based Nanomaterials By Using Nucleating Agents And Statistical Routes, Turki I. Almugaiteeb

Theses and Dissertations

The continuous high demand on permanent magnets in industries opened new research plateau to develop alternative magnetic material. The current used permanent magnet materials in the market still suffer from high cost and insufficient magnetic or thermal properties. The central focus of this dissertation work is the optimization of cobalt carbide based nanomaterial by means of modifying polyol synthesis assisted by nucleation agent and systematic statistics using JMP software tool. In most existing literatures, producing cobalt carbide (Co₂C or Co₃C) lack reproducibility and consistency resulting in nonsolid magnetic properties results. The practical requirements for cobalt carbide …

Efficiency Evaluation Of A Magnetically Driven Multiple Disk Centrifugal Blood Pump, Kayla H. Moody

Theses and Dissertations

Heart failure is expected to ail over 8 million people in America by 2030 leaving many in need of cardiac replacement. To accommodate this large volume of people, ventricular assist devices (VADs) are necessary to provide mechanical circulatory support. Current VADs exhibit issues such as thrombosis and hemolysis caused by large local pressure drops and turbulent flow within the pump. Multiple disk centrifugal pumps (MDCPs) use shearing and centrifugal forces to produce laminar flow patterns and eliminate large pressure drops within the pump which greatly reduce risks that are in current VADs. The MDCP has a shaft drive system (SDS) …

Power Maximization For Pyroelectric, Piezoelectric, And Hybrid Energy Harvesting, Murtadha A. Shaheen

Theses and Dissertations

The goal of this dissertation consists of improving the efficiency of energy harvesting using pyroelectric and piezoelectric materials in a system by the proper characterization of electrical parameters, widening frequency, and coupling of both effects with the appropriate parameters.

A new simple stand-alone method of characterizing the impedance of a pyroelectric cell has been demonstrated. This method utilizes a Pyroelectric single pole low pass filter technique, PSLPF. Utilizing the properties of a PSLPF, where a known input voltage is applied and capacitance C_p and resistance R_p can be calculated at a frequency of 1 mHz to 1 Hz. …

Development And Characterization Of Lung Derived Extracellular Matrix Hydrogels, Robert A. Pouliot

Theses and Dissertations

Chronic obstructive pulmonary disease (COPD) including emphysema is a devastating condition, increasing in prevalence in the US and worldwide. There remains no cure for COPD, rather only symptomatic treatments. Due to unique challenges of the lung, translation of therapies for acute lung injury to target chronic lung diseases like COPD has not been successful. We have been investigating lung derived extracellular matrix (ECM) hydrogels as a novel approach for delivery of cellular therapies to the pulmonary system.

During the course of this work we have developed and characterized a lug derived ECM hydrogel that exhibits “injectability,” allowing cells or dugs …

An Injectable Stem Cell Delivery System For Treatment Of Musculoskeletal Defects, Shirae Leslie

Theses and Dissertations

The goal of this research was to develop a system of injectable hydrogels to deliver stem cells to musculoskeletal defects, thereby allowing cells to remain at the treatment site and secrete soluble factors that will facilitate tissue regeneration. First, production parameters for encapsulating cells in microbeads were determined. This involved investigating the effects of osmolytes on alginate microbead properties, and the effects of alginate microbead cell density, alginate microbead density, and effects of osteogenic media on microencapsulated cells. Although cells remained viable in the microbeads, alginate does not readily degrade in vivo for six months. Therefore, a method to incorporate …

A Computational Study Of Curvature In The Outflow Graft Of A Continuous Flow Left Ventricular Assist Device, Laura Patterson

Theses and Dissertations

Left ventricular assist devices (LVADs) are an increasingly utilized therapy for end-stage heart failure. Thrombosis within the graft from the pump to the aorta has been documented, but is poorly researched. This study examines the effect of graft geometry, as measured by radius of curvature, bend angle, and diameter, on thrombogenic flow patterns within the graft for a range of flow conditions. It also examines the effect blood properties, including viscosity and density, on these flow patterns. The results indicated that radius of curvature had a powerful effect on thrombogenic flow patterns. Flowrate and bend angle were also influential. The …

Ultra–Low Power Straintronic Nanomagnetic Computing With Saw Waves: An Experimental Study Of Saw Induced Magnetization Switching And Properties Of Magnetic Nanostructures, Vimal G. Sampath

Theses and Dissertations

A recent International Technology Roadmap for Semiconductors (ITRS) report (2.0, 2015 edition) has shown that Moore’s law is unlikely to hold beyond 2028. There is a need for alternate devices to replace CMOS based devices, if further miniaturization and high energy efficiency is desired. The goal of this dissertation is to experimentally demonstrate the feasibility of nanomagnetic memory and logic devices that can be clocked with acoustic waves in an extremely energy efficient manner. While clocking nanomagnetic logic by stressing the magnetostrictive layer of a multiferroic logic element with with an electric field applied across the piezoelectric layer is known …

Using Mavt To Incorporate Public Perception When Choosing A Nuclear Fuel Cycle, Stephen Clement

Theses and Dissertations

Nuclear energy is a source of carbon free power. With many countries striving to make deep carbon cuts in their energy sectors, nuclear energy could be a large part of the solution. One of the main obstacles standing in the way of the use of nuclear energy is the issue of used nuclear fuel disposal. According to the NEI, the U.S. creates about 2000 metric tons of used nuclear fuel per year and has generated around 76,000 metric tons of used nuclear fuel over the last 4 decades. While there are technical problems that need to be solved, it is …

The Dawn Of New Quantum Dots: Synthesis And Characterization Of Ge1-Xsnx Nanocrystals For Tunable Bandgaps., Richard J. Esteves

Theses and Dissertations

Ge_1-xSn_x alloys are among a small class of benign semiconductors with composition tunable bandgaps in the near-infrared spectrum. As the amount of Sn is increased the band energy decreases and a transition from indirect to direct band structure occurs. Hence, they are prime candidates for fabrication of Si-compatible electronic and photonic devices, field effect transistors, and novel charge storage device applications. Success has been achieved with the growth of Ge_1-xSn_x thin film alloys with Sn compositions up to 34%. However, the synthesis of nanocrystalline alloys has proven difficult due to larger discrepancies (~14%) in …

Resilient Dynamic State Estimation In The Presence Of False Information Injection Attacks, Jingyang Lu

Theses and Dissertations

The impact of false information injection is investigated for linear dynamic systems with multiple sensors. First, it is assumed that the system is unaware of the existence of false information and the adversary is trying to maximize the negative effect of the false information on Kalman filter's estimation performance under a power constraint. The false information attack under different conditions is mathematically characterized. For the adversary, many closed-form results for the optimal attack strategies that maximize the Kalman filter's estimation error are theoretically derived. It is shown that by choosing the optimal correlation coefficients among the false information and allocating …

Role Of E-Cadherin Force In The Spatial Regulation Of Cell Proliferation, Abhinav Mohan

Theses and Dissertations

Cell proliferation and contact inhibition play a major role in maintaining epithelial cell homeostasis. A hallmark of epithelial cells is strong cell-cell junctions. These junctions include E-Cadherin, a type of adherens junction that is critical for both barrier function and contact inhibition. Prior experiments by other groups have shown that adherens junctions are subject to mechanical tension. Externally applied forces (e.g. stretch) results in changes in E-Cadherin forces that coordinate proliferation. My current work tests the hypothesis that E-Cadherin forces mediate the spatial regulation of cell proliferation even in the absence of externally applied forces.

High-Temperature, High-Pressure Viscosities And Densities Of Toluene, Aaron J. Rowane

Theses and Dissertations

High-temperature, high-pressure (HTHP) conditions are exemplified in ultra-deep petroleum reservoirs and can be exhibited within diesel engines. Accurate pure component hydrocarbon data is essential in understanding the overall behavior of petroleum and diesel fuel at these conditions. The present study focuses on the HTHP properties of toluene since this hydrocarbon is frequently used to increase the octane rating of gasoline and toluene occurs naturally in crude oil. In this thesis experimental densities and viscosity are presented to 535 K and 300 MPa extending the database of toluene viscosity data to higher temperature than previous studies. The data is correlated to …

Drying Methods For The Fabrication Of Polymer Foam Material, Dalton Echard

Theses and Dissertations

This is a report on the study of the drying of nanoporous polymer foam material fabricated by photolithogtaphic methods. Three drying methods were employed, which were air drying, supercritical drying and freeze drying. After fabrication and drying, physical properties of the polymer foams were measured. These measurements included density of the material, Young’s modulus, surface area, and the shape of the skeletal particles. The measurements determined the effect of the polymer concentration and the effect of drying methods. It was determined that polymer concentration had a much larger effect on the properties of the materials than the drying method.

Improving Understandability And Uncertainty Modeling Of Data Using Fuzzy Logic Systems, Dumidu S. Wijayasekara

Theses and Dissertations

The need for automation, optimality and efficiency has made modern day control and monitoring systems extremely complex and data abundant. However, the complexity of the systems and the abundance of raw data has reduced the understandability and interpretability of data which results in a reduced state awareness of the system. Furthermore, different levels of uncertainty introduced by sensors and actuators make interpreting and accurately manipulating systems difficult. Classical mathematical methods lack the capability to capture human knowledge and increase understandability while modeling such uncertainty.

Fuzzy Logic has been shown to alleviate both these problems by introducing logic based on vague …

Design & Analysis Of A Computer Experiment For An Aerospace Conformance Simulation Study, Ryan W. Gryder

Theses and Dissertations

Within NASA's Air Traffic Management Technology Demonstration # 1 (ATD-1), Interval Management (IM) is a flight deck tool that enables pilots to achieve or maintain a precise in-trail spacing behind a target aircraft. Previous research has shown that violations of aircraft spacing requirements can occur between an IM aircraft and its surrounding non-IM aircraft when it is following a target on a separate route. This research focused on the experimental design and analysis of a deterministic computer simulation which models our airspace configuration of interest. Using an original space-filling design and Gaussian process modeling, we found that aircraft delay assignments …

Modeling Time-Dependent Performance Of Submerged Superhydrophobic Or Slippery Surfaces, Ahmed A. Hemeda

Theses and Dissertations

The goal of this study is to quantify the transient performance of microfabricated superhydrophobic surfaces when used in underwater applications. A mathematical framework is developed and used to predict the stability, longevity, and drag reduction benefits of submerged superhydrophobic surfaces with two- or three-dimensional micro-textures. In addition, a novel design is proposed to improve the drag-reduction benefits of lubricant-infused surfaces, by placing a layer of trapped air underneath the lubricant layer. The new design is referred to as lubricant–infused surfaces with trapped air, and it is designed to eliminate the long-lasting longevity problem of submerged superhydrophobic surfaces. The effectiveness of …

Magnetic Materials Characterization And Modeling For The Enhanced Design Of Magnetic Shielding Of Cryomodules In Particle Accelerators., Sanjay K. Sah

Theses and Dissertations

Particle accelerators produce beams of high-energy particles, which are used for both fundamental and applied scientific research and are critical to the development of accelerator driven sub-critical reactor systems. An effective magnetic shield is very important to achieve higher quality factor (Qo) of the cryomodule of a particle accelerator. The allowed value of field inside the cavity due to all external fields (particularly the Earth’s magnetic field) is ~15 mG or less. The goal of this PhD dissertation is to comprehensively study the magnetic properties of commonly used magnetic shielding materials at both cryogenic and room temperatures. This knowledge can …

Friction Stir Welding And Processing On Titanium Alloys, Dawei Li

Theses and Dissertations

Friction stir welding (FSW) is a solid-state joining process that utilizes a non-consumable, rotating tool to plunge into abutting faces and transverse along the weld path. Material nearby the tool is softened by frictional heat generated via local friction and plastic deformation. Severe plastic deformation of the interface along with a state of hydrostatic pressure results in creation of a joint by metallurgical bonding. Because the temperature of the material during the welding process is below that of the melting point, FSW has numerous advantages over conventional fusion welding. Friction consolidation (FC) is also a solid-state process that uses a …

Modeling Fluid Interactions With Granular And Fibrous Surfaces, Mana Mokhtabad Amrei

Theses and Dissertations

Understanding the interactions between a body of liquid and a curvy surface is important for many applications such as underwater drag force reduction, droplet filtration, self-cleaning, and fog harvesting, among many others. This study investigates ways to predict the performance of granular and fibrous surfaces for some of the above applications. More specifically, our study is focused on 1) modeling the mechanical stability of the air-water interface over submerged superhydrophobic (SHP) surfaces and their expected drag reduction benefits, and 2) predicting the mechanical stability of a droplet on a fiber in the presence of an external body force. For the …

Estimating Local Average Power In A Line-Of-Sight Indoor Channel: Spatial Sampling And Processing, Israt Jahan Disha

Theses and Dissertations

Modeling of indoor radio channels has been a dynamic area of research in recent years because of the increasing demand for indoor wireless communications. In order to efficiently deploy such indoor systems, a good knowledge of the indoor wireless channel’s characteristics are required. One important characteristic is an accurate propagation path loss model. For developing such models various measurements have been carried out. In modeling propagation path loss in complex indoor environments, accurate and fast algorithms for estimating the local mean signal level are essential; these are also of use for power control and handoff decisions. These local mean power …

Numerical Studies Of Arterial Tissue Failure, Xiaochang Leng

Theses and Dissertations

Arterial tissue failure leads to a number of potentially life-threatening clinical conditions, such as atherosclerotic plaque rupture and aortic dissection which develop unpredictably and rapidly in vivo. Thus, a full understanding of the two conditions will provide a solid basis for medical advances in the intervention and prevention of the occurrence of this life-threatening event. The present work aims to develop a cohesive zone model (CZM) approach for analysis and simulation of arterial tissue failure, such as plaque and fibrous cap delamination and tearing, and to validate simulation predictions with experimental results.

To characterize the hysteresis phenomenon of diseased aortic …

Automated Image Analysis And Spatial Computational Modeling Of Nf-Kb In Cerebrovascular Endothelial Cells, Kasey Catalfomo

Theses and Dissertations

Cerebrovascular endothelial cells play a key part in the inflammatory response of the blood-brain barrier in pathological conditions such as Alzheimer’s disease. Specifically, the NF-κB signaling pathway plays a central role. Better understanding of the factors in inflammatory disease progression can lead to more effective treatments for such devastating illnesses like Alzheimer’s, asthma, arthritis, cancer, diabetes and many more inflammatory diseases. The proposed approach analyzes spatial NF-κB distribution contained in multispectral stacked micrograph images of cerebrovascular endothelial cells indexed based on dose of the activating protein and the length of activation. Image analysis code identifies the location of nuclear boundaries …

Characterization Of Human-Induced Vibrations, Benjamin Thomas Davis

Theses and Dissertations

In the US alone, 20% of citizens will be over the age of 65 by the year 2030, and the largest challenge facing this growing demographic is not a new disease but a simple motion - the fall. These events are the premier cause of fatal and nonfatal injuries. In fact, a fall is so common that every 17 seconds an older adult is treated for fall-related injuries, and every 30 minutes, an older adult dies from fall complications. Research has shown a positive outcome of a fall event is largely dependent on the immediate response (<30 minutes) and rescue of the person.

This work explores …