Engineering Commons^™

Microfabrication And Characterization Of Freestanding And Integrated Carbon Nanotube Thin Films, Derric Benjamin Syme

Theses and Dissertations

This work chronicles the fabrication of two unique thin films using carbon nanotubes. The first is a carbon film made primarily from vertically grown carbon nanotubes (CNTs) and rolled into lateral alignment. The second is an insulating film created by CNTs as a scaffolding to create a porous silica layer. Each topic represents a different method of utilizing CNTs for thin-film fabrication.Investigation of an entirely carbon thin film, comprised of aligned and laterally oriented carbon nanotubes was performed. The thin film was strengthened by deposition of amorphous carbon for a total thickness of <<> 5 µm. This thickness is thinner than …

Analysis Of Distortion Transfer And Generation Through A Fan And A Compressor Using Full-Annulus Unsteady Rans And Harmonic Balance Approaches, Daniel Robert Soderquist

Theses and Dissertations

Understanding distortion transfer and generation through fan and compressor blade rows is able to assist in blade design and performance prediction. Using full annulus unsteady RANS simulations, the effects of distortion as it passes through the rotor of a transonic fan at five radial locations (10%, 30%, 50%, 70%, and 90% span) are analyzed. The inlet distortion profile is a 90-degree sector with a 15% total pressure deficit. Fourier distortion descriptors are used in this study to quantitatively describe distortion transfer and generation. Results are presented and compared for three operating points (near-stall, design, and choke). These results are used …

Near Real-Time Flood Forecasts From Global Hydrologic Forecasting Models, Corey Nicholas Krewson

Theses and Dissertations

This research assesses possible methods for extending the Streamflow Prediction Tool from a streamflow forecasting model to a flood extent forecasting model. This new flood extent forecasting model would allow valuable and easy to understand information be disseminated in a timely manner for flood preparation and flood response. The Height Above Nearest Drainage (HAND) method and AutoRoute method were considered for flood extent models but the HAND was the better option for its simple and quick computation as well as its viability on a global scale. Due to the importance of Digital Elevation Models (DEMs) in these flood extent models, …

Mesoscale Modeling Of Shape Memory Alloys By Kinetic Monte Carlo–Finite Element Analysis Methods, Adam David Herron

Theses and Dissertations

A coupled kinetic Monte Carlo – Finite Element Analysis (kMC–FEA) method is developed with a numerical implementation in the Scalable Implementation of Finite Elements at NASA (ScIFEN). This method is presented as a mesoscale model for Shape Memory Alloy (SMA) material systems. The model is based on Transition State Theory and predicts the nonlinear mechanical behavior of the 1st order solid–solid phase transformation between Austenite and Martensite in SMAs. The kMC–FEA modeling method presented in this work builds upon the work of Chen and Schuh [1, 2]. It represents a “bottom-up” approach to materials modeling and could serve as a …

Three-Dimensional Plasma Cell Survival Microniche In Multiple Myeloma, Katrina A. Harmon

Theses and Dissertations

Multiple myeloma (MM) is an incurable malignancy characterized by the uncontrolled proliferation of long-lived plasma cells (PCs) in the bone marrow (BM), which constitute at least 10% of BM cellularity. Normally, long-lived plasma cells make up less than 1% of BM cells. Plasma cells become neoplastic when a clonal PC population produces a monoclonal immunoglobulin protein. A diagnosis of monoclonal gammopathy of undetermined significance (MGUS) is made when there is an increase in monoclonal PCs within the BM, but less than 10%, and the patient does not present with end-organ damage, which is associated with active MM. Though not considered …

Analysis Of Cellular Interactions Within A Collagen Hydrogel, Austin N. Worden

Theses and Dissertations

Evidence has arisen over the past several years that use of a three- dimensional (3D) culture system provides a distinct advantage over two- dimensional (2D) systems when cellular interactions are examined in a more natural environment. Changes in morphology, speed, and directionality of cells tested in both planar and 3D matrices have all demonstrated that using 3D system is advantageous. The changes to the cellular migration patterns were shown to be dependent on several variables within the surrounding substrate including cellular content, physical environment, and the matrix chemical milieu. We have taken advantage of using collagen hydrogels as a 3D …

Numerical Analysis On Convective Cooling Augmented By Evaporative Heat And Mass Transfer For Thermal Power Plant Application, Sudipta Saha

Theses and Dissertations

This thesis work describes a numerical study on the effect of evaporative cooling on the augmentation of forced convective cooling. In recent years, on-demand phase change boosted cooling has drawn major interest where convective heat transfer is augmented/aided by evaporative heat and mass transport processes. This dual mode (convection and evaporation) cooling method is envisioned to drastically enhance the heat transfer coefficient where conventional convective cooling has already reached its maximum value and furthermore dry cooling is still a desired objective. A multi- dimensional mathematical model has been developed to conduct simulations over a range of operating parameters to obtain …

Role Of P-Glycoprotein In Alzheimer’S Disease For Enhanced Brain Elimination Of Amyloid-Β, Hope Holt

Theses and Dissertations

Alzheimer’s disease (AD), the most common form of neurodegenerative disorder, is characterized by deposition of amyloid-β (Aβ) plaques in the brain. Aβ monomer undergoes nucleation to form oligomers, then soluble aggregates, then fibrils which make up the plaques. Aβ oligomer species are believed to be the most neurotoxic aggregate species. Currently under investigation is a mechanism for Aβ removal from the brain, across the blood-brain barrier (BBB). P-glycoprotein (P-gp) is a membrane-bound efflux protein located on the apical, or blood, side of the BBB, which transports a wide variety of substrates. Further complicating this potential clearance mechanism is the reduction …

Rage Expression And Inflammation In Alzheimer’S Disease: In Vitro Model Development And Investigation Of A Potential Peptoid Inhibitor, Lauren Michell Wolf

Theses and Dissertations

Despite the increasing prevalence of Alzheimer’s disease (AD), efforts to establish a definitive treatment or cure have met with little success. Many previous therapeutic strategies for AD have focused on the aggregation and accumulation of amyloid-b (Ab) in the brain, concentrating on its small intermediate aggregates as the primary targets to ameliorate neurotoxicity and damage. This approach has yielded little progress, and more recent discussions have shifted to strategies geared toward a multifaceted pathology, with chronic neuroinflammation emerging as an important factor in the disease etiology and progression.

The receptor for advanced glycation end-products, or RAGE, is …

Three-Dimensional Collagen Tubes For In Vitro Modeling, Rebecca Jones

Theses and Dissertations

Collagen type I represents a novel material for three-dimensional in vitro models. While two-dimensional models are typically inadequate for recreating the complex processes of the body, collagen provides a three-dimensional basis with a variety of applications, including remodeling of vascular cells under tension and vascular stenosis. Smooth muscle cells reorganize and reconstruct their environment differently under conditions of tensions, such as with sutures, or under conditions without applied external tension. Vascular stenosis, the abnormal narrowing of blood vessels, arises from defective developmental processes or atherosclerosis-related adult pathologies. Stenosis triggers a series of adaptive cellular responses that induces adverse remodeling, which …

Estimating Phase Durations For Chloride-Induced Corrosion Damage Of Concrete Bridge Decks In Utah, Kaylee Dee Bateman

Theses and Dissertations

Chloride-induced deterioration of concrete bridge decks can be described in terms of three phases: 1) initiation of rebar corrosion, 2) rust formation and development of deck damage, and 3) accelerated deck damage towards structural failure. The first objective of this research was to investigate relationships among chloride concentration at the top mat of reinforcing steel, deck age, cover depth, and occurrence of delamination for concrete bridge decks with selected surface treatments and rebar types. Relating these factors can help establish greater understanding about the duration of each phase of the deterioration process. A second objective of this research was to …

Skeletal Muscle Recovery And Vibration, Garrett Collier Jones

Theses and Dissertations

In the past decade there has been a significant increase in focus on the effect upper body vibration (UBV) has on the recovery of skeletal muscle after exercise-induced muscle damage. Recovery can be defined and investigated using a wide variety of methods. This study used three different measurements to track muscle recovery over 7 days following an exercise muscle damage protocol and applied vibration to a mathematical model. A visual analog scale (VAS) was used to measure muscle pain, a strain gauge was used to obtain maximum voluntary isometric contraction (MVIC) strength measurements, and shear wave elastography (SWE) represented muscle …

Finite Element Electromagnetic (Em) Analyses Of Induction Heating Of Thermoplastic Composites, Ankit Patel

Theses and Dissertations

Thermoplastic composites are in great demand for current and future manufacturing of aircraft and automotive industries. Induction heating and welding of thermoplastic composite laminates is of great significance. The non-contact method of heating and welding is being adopted in aircraft parts, engine parts, and turbine parts manufacturing among many other things. This thesis performs simulations and analyses of Electromagnetic (EM) induction heating of thermoplastic composites materials.

The induction heating and welding of thermoplastic composites in the presence of a susceptor alloy (called Monel) consisting of 67% nickel and 27% copper is studied using a Finite Element Analysis (FEA) software. A …

Modeling And Loss Analysis Of Sic Power Semiconductor Devices For Switching Converter Applications, Soheila Eskandari

Theses and Dissertations

Since its inception, power electronics has been to a large extent driven by the available power semiconductor devices. Switching power converter topologies, modes of operation, switching frequencies, passive filtering elements are chosen based on the switching and conduction characteristics of power semiconductor devices. In recent times new wide bandgap power semiconductor devices, such as SiC MOSFETs, are emerging with superior performance as compared to conventional silicon devices.

In switching power converter design, power losses of the power semiconductor de- vices play a crucial role in determining the physical characteristics of power converter systems in terms of size, weight, efficiency and, …

Development Of Models For Road-Rail Intermodal Freight Network Under Uncertainty, Md Majbah Uddin

Theses and Dissertations

Freight activities are directly related to a country’s Gross Domestic Product and economic viability. In recent years, the U.S. transportation system supports a growing volume of freight, and it is anticipated that this trend will continue in the coming years. To support the projected increase in freight volume, an efficient, reliable, and low-cost freight logistics system is necessary to keep the U.S. competitive in the global market. In addition, intermodal transport is becoming an increasingly attractive alternative to shippers, and this trend is likely to continue as state and federal agencies are considering policies to induce a freight modal shift …

Structural Health Monitoring And Non-Destructive Inspection Of Composite And Metallic Structures, Asaad Qasim Migot

Theses and Dissertations

Structural Health Monitoring (SHM) and Nondestructive Testing (NDT) techniques are being used as effective tools for investigating variety of civil, mechanical, and aerospace applications. In recent years, these techniques become such incredible tools for continuously monitoring of various structures. The aim of the dissertation work is to develop SHM and NDT methodologies for acoustic emission sources localization, damage detection and quantification in metallic and composite structures using a network of sensors, guided wave and developed imaging methods. This work is implemented through preparing metallic and composite specimens, setting up experiments, designing efficient networks of sensors, modeling guided wave interaction with …

Mechanisms Of Radium Adsorption On Silica And Barite, Hamid Hamid

Theses and Dissertations

The use of experimental studies with computer modeling is vital in the development of cost-effective methods for treating radium containing wastewaters. The goal of this dissertation is to develop a multi-scale model to study radium removal mechanisms onto silica and barite, and the effect of water quality parameters on radium removal. The major tasks to be accomplished in this study are: to develop a multi-component isotherm model for radium removal on different ionized silica surfaces; to re-parameterize sulphate force fields to account for metal-sulfate interactions; and to simulate radium removal on barite under different water quality conditions. We conducted molecular …

Modeling Complex Oxides: Thermochemical Behavior Of Nepheline-Forming Na-Al-Si-B-K-Li-Ca-Mg-Fe-O And Hollandite-Forming Ba-Cs-Ti-Cr-Al-Fe- Ga-O Systems, Stephen A. Utlak

Theses and Dissertations

High concentrations of Na2O and Al2O3 in the liquid high-level radioactive waste (HLW) stored at the Hanford Site can cause nepheline (NaAlSiO4) to precipitate in a vitrified monolithic waste form upon cooling. Nepheline phase formation removes glass- former SiO2 and -modifier Al2O3 from the immobilization matrix in greater proportion to alkalis, which can reduce glass durability and consequently increase the leach rate of radionuclides into the surrounding environment.

Current uncertainty in defining the HLW glass composition region prone to precipitating nepheline necessitates targeting a conservative waste loading, which raises operational costs by extending the liquid radioactive waste disposal mission and …

Three-Dimensional Plasma Cell Survival Microniche In Multiple Myeloma, Katrina A. Harmon

Theses and Dissertations

Multiple myeloma (MM) is an incurable malignancy characterized by the uncontrolled proliferation of long-lived plasma cells (PCs) in the bone marrow (BM), which constitute at least 10% of BM cellularity. Normally, long-lived plasma cells make up less than 1% of BM cells. Plasma cells become neoplastic when a clonal PC population produces a monoclonal immunoglobulin protein. A diagnosis of monoclonal gammopathy of undetermined significance (MGUS) is made when there is an increase in monoclonal PCs within the BM, but less than 10%, and the patient does not present with end-organ damage, which is associated with active MM. Though not considered …

Plasma Surface Functionalization Of Afp Manufactured Composites For Improved Adhesive Bond Performance, Ibrahim Sarikaya

Theses and Dissertations

High-performance composite structures not only require a reliable fabrication process when creating primary structures, but also a high fidelity and repeatable bonding process for the assembled components. During the assembly process, surface contaminants are a major concern as they have the potential to compromise the bond quality resulting in poor bond strength, low failure load, and undesirable failure modes of the adhesively bonded structures. This is further complicated by composite materials inherently possessing low surface energy and thus exhibiting low adhesive property. Therefore, detecting and removing contaminants on the pre-bond composite surface is an active research topic in pursuit of …

Electrode Development And Electrocatalysts Design For Polymer Electrolyte Membrane Fuel Cells, Xiong Peng

Theses and Dissertations

Because of environmental issues and national conflicts caused by overuse of fossil fuels, there is a need to seek renewable ways to utilize energy. In the transportation sector, hydrogen-based polymer electrolyte membrane fuel cells, including proton exchange membrane fuel cells (PEMFCs) and anion exchange membrane fuel cells (AEMFCs), have been considered as a promising alternative to conventional combustion engines. However, the widespread commercialization of both PEMFCs and AEMFCs has been hindered by several factors, including cost and performance. In this thesis, a series of topics including electrode fabrication, electrocatalyst development for both PEMFCs and AEMFCs, as well as the water …

Path Loss Models For Two Small Airport Indoor Environments At 31 Ghz, Alexander L. Grant

Theses and Dissertations

Path loss modeling plays a fundamental role in the design of fixed and mobile communication systems for a range of applications. Another term for path loss is channel attenuation, or reduction in signal power from transmitter to receiver. Work here was in support of a NASA project for advanced air traffic management (ATM) applications, specifically for improving the efficiency of airports. Measurements in the millimeter wave (mmWave) band were conducted at 31 GHz in indoor settings at a small municipal airport, the Jim Hamilton–L.B. Owens Airport, in Columbia, SC. Some measurements were also taken at 5 GHz for comparison. A …

Low Frequency Injection As A Method Of Low-Level Dc Microgrid Communication, Matthew Davidson

Theses and Dissertations

In the last ten years, DC microgrid approaches have gained more popularity for the interconnection of distributed energy resources (DERs) and prosumers. The devices (generation, storage, and load) connected to the network may contain operational parameters that have the ability to be adjusted in real-time as to optimize the operation of the microgrid. In this thesis, a simple unidirectional global communication scheme is defined, implemented, and tested. The proposed approach relies on low frequency sinusoidal components that are injected into the DC microgrid power lines. Using the proposed communication approach, multiple parameters can be transmitted to the devices connected to …

Surface Science And Engineering Of Nano-Structured Cathodes For Intermediate Temperature Solid Oxide Fuel Cells, Yeting Wen

Theses and Dissertations

The bulk-to-surface Sr-segregation can seriously compromise the stability of oxygen electrocatalysis in Sr-doped perovskite oxides such as La1-xSrxCoO3-δ and La1-xSrxCo1- yFeyO3-δ and limit their practical applications as cathode materials in solid oxide fuel cells. Although such chemical instability has been actively studied in recent years, fundamental understanding of Sr-segregation process vs temperature and time, particularly under real-world conditions, as well as the suppression method, are still needed. This PhD dissertation aims to acquire fundamental knowledge of Sr-segregation process under practical conditions in solid oxide fuel cells and develop suppression method to ensure the long-term stability through surface modifications.

To gain …

Acoustoelastic Metamaterial With Simultaneous Noise Filtering And Energy Harvesting Capability From Ambient Vibrations, Fariha Mir

Theses and Dissertations

Harvesting unused and untapped energy from ambient vibration noise and acoustic sound waves is an emerging field of research in the recent years. Utilization of the energy with a wide band of the frequency spectrum from the vibrational sources alone stands as one of the most promising ways to power small electronic devices, smartphones, local structural health monitoring (SHM) sensors and home and workshop appliances. Various sources of ambient vibration and acoustic noise can be found around us in our everyday life. These sources are abundant in almost all the engineering industries and manufacturing facilities for example in aerospace, mechanical …

Landslide Detection Using Remote Sensing Methods A Review Of Current Techniques, Sumanth Varma Byrraju

Theses and Dissertations

Landslides are among the most dangerous natural disasters, as they generally follow other major disasters thereby causing significant damage to already weakened systems. In the U.S. alone they cause an excess of 1 billion in damages and an average 25-50 deaths annually(USGC). Remote sensing techniques for landslide monitoring and prediction has gained popularity in recent years since it enables hazard mitigation. Synthetic Aperture Radar (SAR) interferometry is among the remote sensing techniques used. DInSAR is an advanced interferometric technique which uses radar sensors to estimate the phase of a given area from which the landslide activity can be predicted. The …

The Use Of Multi-Targeting Natural Products For The Treatment Of Cancer, Wesley Taylor

Theses and Dissertations

The paradigm shift in cancer treatments from traditional chemotherapeutics to targeted therapies has rapidly improved prognoses for patients for whom cancer was once a death sentence. This is especially true in the case of targeted immune therapies which activate the body’s own natural defense system to fight cancer. Despite these advances, however, cancer remains the second leading cause of death in the United States. The promise of targeted therapeutics has faced significant hurdles in providing effective cancer treatments, namely the limited percentage of susceptible cancers for each treatment, high cost burden, high toxicities, and significant risk of treatment induced resistance. …

Friction Stir Additive Manufacturing(Fsam) Of 2050 Al-Cu-Li Alloy, Ilana Lu

Theses and Dissertations

As a solid state process, friction stir welding (FSW) is an advantageous joining method for higher strength aluminum alloys such as 2050 Al-Cu-Li which are not readily fusion welded. This study explores the potential of friction stir lap welding (FSLW) as an additive manufacturing process for this aluminum-lithium alloy. To accomplish this, lap weld joints were performed so that each additional layer would penetrate the preceding weld pass which creates a large, stacked build. Excess material is machined away leaving only weld. Cast AA2050 is explored in this study as a more cost-efficient feedstock for this process as compared to …

Radio Frequency Interference Cancellation,Appraisal, Detection, And Correction, Michael J. Lambert

Theses and Dissertations

Radio Astronomy, the study of distant objects in the radio spectrum, is set at defiance against all other users of the electromagnetic spectrum. Where traditional use would fill the electromagnetic spectrum with as much transmission and information as possible, Radio Astronomy would rather no man-made signals existed. Since that is not possible, they grumble and have to deal with unwanted transmissions impinging upon their instruments. I have demonstrated that subspace projection can remove these unwanted signals from Radio Astronomical data in post processing. I demonstrate it both on simulated data and on data taken from the Very Large Array radio …

Molecular Methods For The Identification And Quantification Of Cyanobacteria In Surface Water Sources, Treyton Michael Moore

Theses and Dissertations

Geosmin is a strong musty-flavored organic compound that is responsible for many taste-and-odor events in surface drinking water sources like lakes and reservoirs. The taste threshold of geosmin for humans is lower than 10 ng/L. Traditional treatment methods will not remove geosmin to this level. Additional water treatment methods must be implemented to successfully remove the geosmin and its associated flavor and odor from drinking water. Furthermore, geosmin is produced by cyanobacteria somewhat sporadically, so it is difficult to predict when taste-and-odor events are going to occur. The difficulty involved with predicting geosmin events has led most water treatment facilities …