Engineering Commons^™

Secondary Resonances Of Electrostatically Actuated Mems Cantilevers, Christopher I. Reyes

Theses and Dissertations

In this work the behavior of micro-electromechanical (MEMS) cantilever resonators is investigated. The cantilever resonators are electrostatically actuated with hard AC voltage resulting in nine distinct resonances cases including super and subharmonic resonances. The amplitude frequency and amplitude voltage bifurcation diagrams are obtained for each of the nine resonance cases. Reduced order models (ROMs) are developed to include one and two modes of vibration. Three different methods are used to solve the ROMs namely 1) the method of multiple scales (MMS), which is a perturbation method used for one mode of vibration, 2) the homotopy analysis method (HAM), which is …

Real-Time Visual Multi-Target Tracking In Realistic Tracking Environments, Jacob Harley White

Theses and Dissertations

This thesis focuses on visual multiple-target tracking (MTT) from a UAV. Typical state-of-the-art multiple-target trackers rely on an object detector as the primary detection source. However, object detectors usually require a GPU to process images in real-time, which may not be feasible to carry on-board a UAV. Additionally, they often do not produce consistent detections for small objects typical of UAV imagery.In our method, we instead detect motion to identify objects of interest in the scene. We detect motion at corners in the image using optical flow. We also track points long-term to continue tracking stopped objects. Since our motion …

An Evaluation Of Wastewater Pumping Station Facilities Using Statistical Techniques In Analyzing Each For Rehabilitation Design And To Improve The Adverse Environmental Affects, Zenaida S. Guerrero

Theses and Dissertations

The objective of this research project is to develop two evaluation models, one using excel to provide a design criterion for wastewater pumping stations in collecting design parameters and information effecting efficiency and performance of the pumps. Secondly, to develop a linear regression model for these parameters giving a correlation between dependent and independent variables to verify adverse environmental aspects. This study is based in the City of Weslaco, pertaining to the north waste watershed. The parameters collected are age, efficiency, service area, total dynamic head, existing conditions, monthly sanitary sewer over flow work orders, precipitation data, population by service …

Design Of A Bedside Walker-Cane Hybrid To Aid Senior Adults Avoid Falls During Night Walks, Jorge L. Gutierrez

Theses and Dissertations

The objective of this research and development work is to design a device to help senior adults prevent fall during night walks indoors. The problem of elders falling at a night setting was found to be caused by the multiple environmental and medical conditions. The target demographic was found to be seniors from age 65 and older. Several occupational therapists and two physical therapists were consulted to gain knowledge on elders' behavior, possible improvements on current existing devices, and feedback regarding the early prototype built. Several products and patents were researched with a lack of findings on similar products that …

Biomechanics Of Lower Limb During The Golf Swing Using Opensim Modeling, Andrew B. Butler

Theses and Dissertations

The purpose of this research is to investigate the biomechanics of the lower-limb using an inverse dynamics model. Experimental data, recorded by an integrated Motion Analysis – Force Plate System in the UTRGV Biomechanics Laboratory, is used to determine ground reaction forces and marker trajectories. OpenSim, a graphical musculoskeletal and computational platform, is used to model the body in three dimensions. The human body is modeled as a 12-segment linkage, consisting of 23 degrees-of-freedom and 92 muscles. The experimental data for the Biomechanics Laboratory is imported in OpenSim. Then, joint angles, generalized coordinates & accelerations of lower-limb segments, muscle forces, …

Experimental Study Of Condensation In Different 3d Printed Regenerators In A Thermoacoustic Cooler, Aibek Bekkulov

Theses and Dissertations

Thermoacoustics (TA) deals with the conversion of heat into sound and vice versa. Device that converts heat into acoustic work is called TA heat engine, while the device that transfers energy from a low temperature reservoir to a high temperature one by utilizing acoustic work is called TA cooler. A simple construction of TA cooler includes an acoustic speaker, a resonator tube and a regenerator stack in which the temperature gradient is being imposed. Such a TA cooler has several advantages over traditional compression/expansion cooling machine such as its simplicity of the construction, high reliability and lack of toxic refrigerants. …

Dehumidification Water Quality Analysis Of The South Texas Gulf Of Mexico, Erik Esteban Castillo

Theses and Dissertations

This project is to introduce a new methodology for environmental research that analyzes humidity from a water treatment perspective. This is done by using a household dehumidifier, which extracts the excess humidity in a given space, to harvest the samples. The dehumidifier was used outside to act as an Atmospheric Water Generator (AWG), which is the process of extracting water from the atmosphere. When AWG is placed near shoreline, then it's classified as a Desalinated Atmospheric Water Generator (DAWG) since it extracts distilled seawater water-vapors. The methodology for DAWG analyzed turbidity in the humidity on SPI, indicating to meet {<.15} TCEQ turbidity water quality standard. The turbidity also showed to have an adverse relation to weather conditions. There is an open market in research on this topic, where the methodology for DAWG can offer answers. This project identifies DAWG as being a sustainable source of potable water for a municipality.

Development Of Flexible Photo-Mechanoluminescent Polymeric Based Systems, Carlos Hernandez

Theses and Dissertations

The project focuses on the creation of nanofiber systems with enhanced photo-mechanoluminescent response and high mechanical flexibility to further enhance promising optical applications. Lanthanide-Polyvinyl Di-Fluoride fiber systems were created using centrifugal spinning and characterized using SEM, FTIR, XPS, DSC, XRD, and PL. Fibers luminescence response was gotten when induced by ultraviolet light and the application of an impact force.

Security Assessment Of Select Computer Systems Under Distributed Denial Of Service Attacks Performed By Botnets, Hugo Armando Herrera Martinez

Theses and Dissertations

With the passage of time Internet connectivity has been found on more electronic devices than in previous decades. This continuous development may be perceived as a double-edged sword. While the world becomes more Internet-connected and quality of life increases, the lack of proper security protocols in some of these electronic devices permits illegitimate parties to take control of them for their own malicious purposes.

This thesis studies the impact of compromised Internet-connected devices on commonly used server operating systems: Microsoft’s Windows Server 2012 R2 Datacenter, Windows Server 2016 Datacenter, and Apple’s macOS 10.13.6 High Sierra deployed on Apple’s Mac Pro …

Polymeric Pvdf Fibers For Piezoelectric Applications In Energy Harvesting, Misael E. Martinez

Theses and Dissertations

This work focuses on developing and characterizing the piezoelectric response of Cerium doped Polyvinylidene Fluoride (PVDF) fine fibers and the effects of dopants and alignment on the formation of the β-phase and consequently on the piezoelectric performance. Six sets of fiber mats were prepared varying the concentration (2.5–7.5wt%) of Cerium (III) Nitrate-Hexahydrate and Ammonium-Cerium (IV) Sulfate-Dihydrate. Fiber mats were developed using the Forcespinning® technique and the angular velocity and dopant concentration were adjusted to obtain a synergy between fiber yield and fiber diameter. Fourier Transform Infrared Spectroscopy showed a significant enhancement in the PVDF β-phase and inhibition of the non-polar …

Blockchain Technology Based Supply Chain Systems And Supply Chain Performance: A Resource-Based View, Madhavi Latha Nandi

Theses and Dissertations

Blockchain technology (BCT) is set to transform firms’ present ways of managing supply chains. This thesis explores how the efforts by firms to integrate BCT into their supply chain systems and activities, can enable certain supply chain capabilities and subsequently, improve supply chain performance. Using an abductive research approach, qualitative content analyses of 126 cases of firms’ efforts in BCT-based supply chain systems (BCT-SCS) across multiple industries are conducted to identify the BCT-enabled supply chain capabilities and their performance outcomes. Findings reveal that the present BCT-SCS efforts are mainly oriented towards improving the operational-level capabilities namely, information sharing and coordination …

Unmanned Aerial System Integration Into The National Airspace System And Airports: Risk Mitigation Using Content Analysis Methodology, Bhoomin Bhupendrabhai Chauhan

Theses and Dissertations

Over the last few years, the use of unmanned aerial systems (UAS) has significantly increased. With an increase in the use of UASs, the number of UAS sightings near manned aircraft and airports have also increased, as shown by the Federal Aviation Administration (FAA)(FAA, 2019a). Although not every near sighting had a severe consequence associated with it, the risks were still present. As UASs are becoming more readily available to the general public, the risks present due to UASs flying in the National Airspace System (NAS) and near airports is also increasing. For the study, incident and accident reports were …

Factors Related To The Assessment Of The Effectiveness Of Environmental Management Systems (Ems) At Airports, Kainan Li

Theses and Dissertations

The purpose of this study was to identify factors that can be used to assess the effectiveness of EMS at airports in the United States (U.S.). A survey research methodology was used for this study in two phases. The first phase of the research study included a preliminary expert opinion survey of airport managers and other individuals acting in a supervisory role to determine and discuss how EMS help improve environmental performance, and ranked factors that may be related to assessing the effectiveness of EMS. The second survey was constructed based on feedback from these experts and targeted airport employees …

Aviation Professionalism: Examining The Concept Of Professionalism Within And Between Major Subgroups Of The Aviation Industry, Rüştü Tolga Turgut

Theses and Dissertations

The purpose of this study was to conduct a secondary analysis of Alhallaf’s (2016) study on aviation professionalism by disaggregating his data into five subgroups: Aircraft Maintenance Technicians (AMT); Airport Managers (AM); Air Traffic Controllers (ATC); Non-Pilot Aviation Employees (NPAE), which consisted of business aviation, flight operations, and aviation colleges/universities; and Pilots. The study posed three research questions and endeavored to (a) determine factors related to professionalism in each subgroup, (b) determine the differences in levels of professionalism among the subgroups, and (c) examine each subgroup’ perceptions of professionalism. The study used an explanatory correlational design to determine the relationship …

Mitigating Risk Tolerance Among General Aviation Pilots: Identifying Factors That Contribute To Ga Pilots’ Risk Perception, Nazif Sani Nuhu

Theses and Dissertations

The purpose of this study was to identify factors that contributed to general aviation (GA) pilots’ level of risk perception, which could then be manifested as an increase in risk tolerance. The study used an explanatory correlational design to determine what factors were related to risk perception. Research factors included gender, age, marital status, race/ethnicity, education level, flight hours, single- and multi-engine hours, hours as PIC, type of flight training, number of FAA licenses/ratings, number of hazardous events pilots were involved in, self-efficacy, aviation safety attitudes, level of psychological distress, and locus of control. The dependent variable was risk perception. …

Study Of A Crew Transfer Vehicle Using Aerocapture For Cycler Based Exploration Of Mars, Larissa Balestrero Machado

Theses and Dissertations

This thesis presents the results of a conceptual design and aerocapture analysis for a Crew Transfer Vehicle (CTV) designed to carry humans between Earth or Mars and a spacecraft on an Earth-Mars cycler trajectory. The thesis outlines a parametric design model for the Crew Transfer Vehicle and presents concepts for the integration of aerocapture maneuvers within a sustainable cycler architecture. The parametric design study is focused on reducing propellant demand and thus the overall mass of the system and cost of the mission. This is accomplished by using a combination of propulsive and aerodynamic braking for insertion into a low …

A First-Principle Power And Energy Model For Evtol Vehicles, Max Skuhersky

Theses and Dissertations

A number of well-established aircraft manufacturers, such as Airbus, Boeing, or Bell, along with new startups have begun developing flying prototypes of electric Vertical Takeoff and Landing vehicles (eVTOL). To certify this emerging type of air mobility vehicles for commercial use, the Federal Aviation Administration (FAA) is considering adjusting currently used certification procedures for small aircraft to include eVTOL vehicles. One of the hurdles to this approach is that eVTOL vehicles are neither able to glide like a small, fixed-wing aircraft, nor to autorotate, like a helicopter, if the batteries are depleted. Therefore, active energy management and energy awareness by …

Validation Of An External Bioreactor Filtration Loop Prototype For A Tissue Engineering Test Bed, Jonah Martin Melegrito

Theses and Dissertations

As a cell line thrives within a culture, some of the cells undergo the natural process of death. Whether it is due to apoptotic or necrotic causes, cell death is a significant hurdle for tissue engineering and cell cultivation. When cells attached to a scaffold die, they slough off from the scaffold into the bloodstream. If left unchecked, these dead cells and any cellular waste products accumulate and could affect the living cells’ ability to survive. The objective of this thesis was to construct a separation system that can filter away any unwanted suspended solids while allowing nutrients to recycle …

Residence Time Distribution (Rtd) Analysis Of A Bioreactor's External Recirculation Loop For A Tissue Engineering Test Bed, Adrien Hosking

Theses and Dissertations

Currently, in tissue engineering, the focus is on morphing cells into a particular type of tissue by hand, rather than automating the process. Automating cell feeding and waste removal, alone, still requires the removal of cells from their culture to perform imaging and analysis. Without the ability to automate the imaging in a way that does not risk cell death, the advantages of automating the feeding and waste removal are largely lost. By building a fully automated tissue engineering test bed, the capacity for cell reproducibility and cell yield increases significantly. This thesis outlines the design, some initial testing, and …

Hrv - Ecg Generator: Software For Testing Heart Rate Variability Detection, Matthew Joseph Pogorelec

Theses and Dissertations

Heart rate variability (HRV) has been shown to serve as an effective diagnostic and prognostic tool in a variety of clinical applications, including for patients who have suffered from myocardial infarction, sepsis and liver cirrhosis. There currently exist a variety of devices and software to quantify HRV based on RR interval series collected from ECG data. However, as the uses for HRV expand, a greater variety of devices for different applications are being designed and developed. Thus, it is useful to have available a method for efficiently testing preliminary software. The HRV/ECG Generator software is designed to build both an …

Geo-Locating Ues Using Multi-Output Decision Tree Regressor, Edel Goreil Dawood

Theses and Dissertations

Mobile communication networks constantly need to monitor and improve the quality of service and network coverage to their users, and to do so, radio measurements are required. One common method for gathering these measurements is Drive Tests (DT) in which vehicles equipped with measuring devices are sent to locations of interests. However, DT has several limitations one of which is that DT cannot be performed on indoor locations. Other approaches were later used; however, failed to prove a considerably higher efficiency. To address this need, mobile operators developed a standardized technique called Minimization of Drive Test (MDT) that take advantage …

Hybrid Long-Range Mid-Infrared Hyperbolic Phonon Polariton Waveguide Using Hexagonal Boron Nitride, Di Xiong

Theses and Dissertations

For any photonic-on-chip applications long propagation waveguides are critical. The use of plasmon polaritons for near-infrared and optical networks has been extensively studied for the purpose of achieving long propagation lengths, however, due to plasmonic polariton effects being negligible in mid- to long-wave infrared (IR) applications, phonon polaritons are required. In recent years, extensive research has been carried out on hexagonal boron nitride (h-BN), and it has been found that h-BN has naturally occurring sub-range phonon volume-constrained hyperbolic phonon polaritons (HPhPs). The numerical results in this thesis show both the long-range and short-range phonon volume polaritons modes in h-BN. A …

Simulation Environment For Astrobee-Rings System, Tamerlan Yeleussizov

Theses and Dissertations

The thesis analyzes a flight software of a new free flying robot Astrobee, that will change the current Synchronized Position Hold Engage Reorient Experimental Satellites (SPHERES) on International Space Station (ISS). First, the main components of the flight software were examined: Robotic Operating System (ROS), Gazebo and MATLAB. During that phase, functionalities of ROS, Gazebo and MATLAB were analyzed, and it was found how these components integrate between each other to build Astrobee flying software. Next, simulation of two Astrobees performing “in-home” and “torque” maneuvers was executed. After a successful completion of simulation, results of Astrobee’s trajectory was recorded. Then, …

Design And Analysis Of Fiber Reinforced Concrete Structure For Transportation Infrastructures, Salam Adil Mutlag Wtaife

Theses and Dissertations

Concrete is one of the most popular materials in superstructures (buildings), substructures (foundation) and infrastructure facilities (bridges, pavements, and tunnels). However, concrete is a brittle material that cracks easily under tension. Fiber may be used as reinforcement to impede the concrete from cracking as well as to increase the concrete flexural strength. Nevertheless, current design codes do not include this design enhancement. Furthermore, there are discrepancies in the design methodology concerning the inclusion of discrete fibers in concrete structures. Therefore; there is a need to develop new analysis methodology and design methodology for fiber reinforced concrete (FRC) and fiber reinforced …

Acceleration, Braking, And Steering Controller For Polaris Gem E2, Matthew Benton Salfer-Hobbs

Theses and Dissertations

This paper discusses the design and simulation of lane keeping and velocity controllers for a Polaris GEM e2. The controllers were designed to be implemented in Florida Institute of Technology’s entry for the Intelligent Ground Vehicle Competition self-drive challenge. The software and physical implementation of actuators were included to control the acceleration, braking, and steering. The accelerator pedal was replaced with a set of digitally controlled potentiometers, the brake pedal was replaced with a linear actuator, and the steering column was replaced with a stepper motor. Each actuator was controlled by a Raspberry Pi 3. A sliding mode controller was …

Membrane Hull Technology Implemented Into A D-Collar Work Boat, Joshua Hagan

Theses and Dissertations

Membrane Hull Technology (MHT) was initially developed for the United States Navy Rigid-Hull Inflatable Boats (RHIB) as an alternative structure design to provide weight savings and shock mitigation. MHT accomplishes this by veering away from traditional hull design and utilizing a grid like system with an increased number of longitudinal stringers and transverse frames with a significantly lower moment of inertia when compared to traditional stringers and bulkheads. The decrease in stiffness allows for increased deflection in the hull during high load events with the added benefit of shock absorption. This technology, developed by Structural Composites Inc., has been successfully …

Feasibility Study And Hydrodynamics Of Transformable Submersible Hydrofoil Trimaran, Yipeng Pan

Theses and Dissertations

It has been the endeavor of naval architects to design innovative hull forms to address the political, socio-economic climate and sustainability around the world. It is imperative that countries be able to protect their sea lanes and coastal zones from surveillance and infiltration from hostile foreign entities. Hence there is a need to develop radically different hull form, which possess the elusive ability and are capable of high-speed. In order to fulfill the idea, the hypothesis envisioned in this thesis is: the Transformable Submersible Hydrofoil Trimaran (TSHT) as an innovative and ground breaking hull form would address the feasibility of …

A Queueing Theory-Based Modeling And Performance Analysis Of Push-To- Talk Over Cellular Networks, Hisham Zorghani

Theses and Dissertations

Public Safety organizations play a vital role in emergencies. Their ultimate goal is to protect people and save lives and properties during disasters. Public safety communities have been using narrowband Trunking systems for their communications for decades. These systems were designed with only voice communications in mind. Even though these narrowband systems have gone throughout many enhancement phases, yet their data capabilities are still limited. Long Term Evolution (LTE) has been selected by many countries including the United States to be the platform for next-generation Public Safety Networks(PSN). The 3GPP LTE standard is all-IP architecture mainly developed to boost its …

Formal Trust Architecture For Assuring Trusted Interactions In The Internet Of Things, Milankumar Patel

Theses and Dissertations

The Internet of Things (IoT) has provided a flexible platform for a large number of heterogeneous devices to dynamically join and leave the network. This enhances the availability of a diverse range of services provided by a network. However, this dynamic expansion of the network with mobile IoT devices introduces a major challenge to security especially related to management of trust across the IoT platforms. Furthermore, IoT is open and distributed in nature, which allows the integration and registration of diverse entities. Thus arises the necessity for a mechanism that can ensure the selection of secure and trusted devices as …

Characterization Of Rf Signal Propagation For Wireless Sensor Network Deployed In Mountainous Environment, Bandar Mohammad Alshawi

Theses and Dissertations

Wireless sensor network (WSN) nodes, in mountainous forests, report real-time data to base stations concerning events, in which researchers and decision makers are interested in. A thorough research reveals the deficiency of any study modeling radio frequency (RF) in that environment. The lack of accurately modeling RF signal propagation in any environment can have a great impact on the network life, connectivity, and coverage. This dissertation models the loss of RF signal in the mountainous environment and demonstrates the inconsistency of theoretical models, compared to actual measurements. The models proposed in this research yield satisfactory results, and the theoretical models …