Engineering Commons^™

Experimental Ion Implantation System For Decaborane Ions, Vijay Babaram

Theses

Future generations of Si technology will require ultra shallow junctions (tens of nm) in the drain and source regions of MOS transistors. Fabrication of such shallow p-type junctions requires implantation of boron at ultra low energies (< 1 keV), below the limits of standard ion implantation technology. A proposed solution involves implantation of B₁₀H_x⁺ ions in which boron atoms carry less than 10% of the beam energy.

This thesis is a part of the feasibility study of this new technology. An experimental ion implantation system was designed and built at Ion Beam and Thin Film Lab, NJIT. The system was tested and the mass analyzing magnet was calibrated using argon ions. Decaborane ions, …

Development And Testing Of A Simulated Closed Loop Drug Delivery System For Chf Patients Under Milrinone Administration, Runa Shah

Theses

The purpose of this thesis project is the development and testing of a simulated closed loop drug delivery (CLDD) system that consists of a pharmacokinetic, physiological, and feedback-controlling model. The focus of this study is on the control of milrinone inflision to maintain cardiac output at desired setpoint range for patients suffering from congestive heart failure (CHF). The simulated CLDD system is written in VisSim dynamic simulation language for an IBM-compatible PC.

Milrinone pharmacokinetics are represented by a three compartment model. The physiological model consists of the cardiovascular system model linked to the pharmacodynamic submodel of milrinone. The feedback-controlling model …

Editing Mpeg2 Video In Compressed Domain, Ren Egawa

Theses

As MPEG2 becomes the heart of most digital video applications, the need to edit an MPEG2 bitstream video in compressed domain has increased. To realize this need, two major technical issues must be resolved: decoder buffer and segment extraction.

In the decoder buffer issue, the edited stream must ensure that the buffer would not overflow or underfiow as the result of the editing. This thesis invented a mathematical model that could describe the editing task and predict the editing effect on the buffer. Based on this model, the thesis then built a method to edit a stream safely. This method …

A Study Of Factors Affecting Cardiovascular Reactivity, Andrew Gill Ventura

Theses

This pilot study was conducted to determine what affects the cardiovascular reactivity of different people. Variables such as the order of stress-inducing and relaxing activities, performing multiple tasks on different days, personality, familial history of diseases, and general health were investigated as to their effects, if any, on cardiovascular reactivity.

Ten healthy, normal male subjects, aged 18 - 33 years, volunteered to be subjected to studies on three experimental days, the first one being for gathering information. On the second and third days, the subjects performed the following activities: mental arithmetic, numeric repetition, 10 breaths-per-minute (bpm) paced-breathing, and normal breathing, …

Measurement Of Microcarrier Weighted Floc Using The Environmental Electron Microscope, Viriya Vithayaveroj

Theses

Utilizing the concept of coagulation in conjunction with the sediment enhancement by microcarrier, the microcarrier process has been demonstrated in a laboratory investigation as an effective and economic operation in removing colloidal particles in an aquatic system. The microcarrier, an inert aluminum silicate particulate (Ottawa Sand) of 53 to 75 micrometers in diameter was used in this study. The interaction between the flocs and the microcarriers plays an important role in the mixing process. The principal objective of this study is to examine the structural interaction between the flocs and the microcarrier.

The study was designed into two stages, the …

Segregation And Flow Characterization In Vibrated Hopper, Thottiam P. Ravichandran

Theses

Experiments and numerical simulation studies were carried. out on vertically vibrated wedge-type hoppers containing binary mixtures for the present research. The studies focussed on segregation analysis of the hopper discharge and the characterization of flow pattern of the binary mixtures in sealed hoppers, over wide ranges of frequency and amplitude of acceleration to determine the effect of these parameters.

The results of segregation study show that vibration promotes segregation of the binary mixtures. However, increase in frequency was found to make the contents of segregated discharge more uniform. Also, increase in wedge angle seemed to help in reducing segregation.

The …

Investigation Of The Relevance Of Heart Rate Variability Changes After Heart Transplantation, Sheeba Arnold

Theses

Heart transplantation has become an established treatment for end-stage heart disease. However, the shortage of donor organs is a major problem and long-term results are limited by allograft rejection. Heart rate variability (HRV) has emerged as a popular noninvasive research tool in cardiology. Analysis of HRV is regarded as a valid technique to assess the sympathovagal balance of the heart. The primary goal of this study was to investigate the relevance of heart rate variability changes after heart transplantation. It was found that spectral analysis of HRV is useful in detecting rejection episodes. Heart transplantation leaves the donor heart denervated. …

Post-Cracking Tensile Properties Of Advanced Cementitious Materials And Ductility Of High Performance Concrete Beams, Wonsiri Punurai

Theses

In present direct tension tests, the complete stress-deformation curves, the resulting energy dissipated by damage, and the fracture energy of different types of cementitious composites, namely plain concrete, high strength concrete, normal fibrous concrete, high strength fibrous concrete, are studied and a ductility factor is calculated. It has been found that with the increasing strength of concrete due to the addition of the pozzoians such as silica fume and fly ash and when changing from normal strength to high strength, concrete ductility decreases. However, when fibers are combined with these matrices, concrete ductility increases. It is because of ductile steel …

Intelligent Process For Uasb Reactors, Sita Mohan

Theses

The Upflow Anaerobic Sludge Blanket (UASB) reactor is widely used for the anaerobic treatment of concentrated municipal / industrial wastewaters and sludges. Ability to handle high organic loading rates and cost effectiveness are often the most cited merits of the UASB process. Numerous mathematical models have been developed to describe the process and mechanistic phenomena in these systems. However, evidence in the literature of these models having been applied, either as control or diagnostic tools is limited. The use of intelligent process control mechanisms can greatly ease problems associated with operating these reactor systems.

The objective of this study is …

General Parallel-Leg Mechanism : Position Analysis, Hans Buus Gangwar

Theses

This thesis proposes to analytically express the positions of the legs (each leg has a length and two spin orientations) for a parallel leg mechanism in terms of a single variable. The only limitations imposed are the leg bases are all on the same reference plane and the tool orientation is normal to the mobile upper plate. This is done for a parallel leg mechanism having any number of legs. The variable chosen is the first leg's vertex position on the upper plate.

The state space is the space the configuration can occupy. By looking at a planar slice of …

A Study Of Sound Attenuation Using Sonic Energy Focussed At An Artificial Soil Fracture, Minhaz Bootwala

Theses

Several laws have been passed over the past two decades to control contamination and to remediate already existing contaminated sites. There are a large number of these sites and several ex-situ and in-situ techniques have been developed to decontaminate these sites. These techniques can be quite expensive, especially the ex-situ clean-up operations, and there has always been a need for cheap, quick remediation methods.

This study investigates the attenuation of sound used in the in situ remediation technique coupling Sonic Energy with Pneumatic Fracturing and Vapor Extraction. Preliminary attenuation studies were performed in the laboratory with a microphone made at …

The Development Of Design And Test Methodologies For Hovercraft, John Cronin

Theses

This project is concerned with the development of design and test methodologies for hovercraft.

Full-scale hovercraft field-testing is to be achieved through the dedicated re-design and re-construction of the ABl11Crossbow hovercraft. The Crossbow hovercraft is an experimental craft, which was built in England in the early seventies. The Crossbows re-design focuses on the production of a versatile craft, which is capable of modification to produce a variety of different operating conditions. The re-design and re-construction comprises several distinct areas. An improved and adjustable lift and thrust system is designed. The design and manufacture of a new more stable and versatile …

Security In Distributed Systems - A Framework For Different Application Types, Ingo Stengel

Theses

Security is a factor which decides upon the applicability of distributed applications. Therefore this thesis deals with security in distributed systems. The complexity of the existing distributed technologies makes it necessary to reduce the number of distributed technologies considered in this thesis, i.e. concentrating on: Java, Mobile Agents and CORBA, where only Java-based mobile agents will be considered.

After a short review of basic security principles including firewalls, existing security problems in the above mentioned distributed technologies are analysed. Additional generic problems in distributed systems are outlined.

Solutions are referring to two different areas: those regarding security problems with firewalls …

Characterization Of Steel Corrosion In An Aggressive Environment, Sung Min Maeng

Theses

As part of the Sustainable Green Manufacturing Program, the corrosion resistance of sputtered tantalum is being studied in order to evaluate it as a replacement coating for electroplated chrome. To accomplish this, studies were conducted to evaluate corrosion properties of the gun barrel steel by employing corrosion rate and bulk measurements including x-ray diffraction (XRD), scanning electron microscopy (SEM)/energy dispersive x-ray spectroscopy (EDX), and x-ray fluorescence (XRF), as well as synchrotron-based x-ray absorption spectroscopy (XAS).

Corrosion behavior of steel immersed in an aggressive environment of 37.8 % hydrochloric acid at room temperature was investigated as a function of time from …

Analysis Of Long-Term Heart Rate Variability Using Labview, Daniel Yang

Theses

Long-term heart rate variability measurement is important in understanding the activities of the autonomic nervous system. Many methods and implications of long-terrn HRV were available in the literature. The first two studies focused on two data analysis techniques that were used on a normal subject. The first study focused on the 1/f fluctuations. For this analysis, three 1 1h heart rate variability data sets were collected with the Polar Vantage NV. A LabVIEW program was used to calculate the power spectrum of the heart rate, and then the 1/f line was calculated by taking the log of the power spectrum …

Interventions Of Water Jet Technology On Skin Surgery, Kittipat Vichyavichien

Theses

The perfect and precise surgical cut, similar to today's laser one, is very important in many surgeries, especially in dissection and to recanaize arterial occlusive lessions. Causing no coagulation is one of the advantages of water jet because it generates no heat. It also provides omni-directional cutting capabilities at very high speeds, resulting edge quality that is usually superior to other existing conventional cutting processes. Debris is always carried away from incisions by jet stream and less damaged tissue, than mechanical incisions. In addition, water jet exerts minimal contact pressure on the tissue being cut due to the small diameter …

Measurements Of The Effects Of Colored Light On The Body, Lynne Hendrickson

Theses

Colored light is used in movies, restaurants, and other situations to create particular environments. It creates a mood and sets a stage for specific events.

This study used colored light to create relaxation and stress in order to evaluate physiological reactions in the human body. In all four studies of this paper, EEG, EKG, and peripheral blood flow were recorded and observed and in the latter two studies peripheral temperature and conductance were also recorded. An audio stressor was introduced in the first three studies to evaluate the stability of the altered mood of the individuals.

Considerable mood alterations were …

Emissivity Measurements And Modeling Of Silicon Related Materials, Vijay Krishnamurthy

Theses

The objective of the thesis was to study the radiative properties of silicon related materials for applications in rapid thermal proceesing. In particular, three distinct materials have been considered - Silicon, SIMOX and Tantalum.

The research highlights are Establishment of spectral emissometry as a novel, reliable and reproducible technique for a) Determination of wavelength and temperature dependent reflectivity, transmissivity, emissivity of silicon related materials and structures. The emissometer operates in the wavelength range of 1-20µm and temperature range of 300-1200K. b) Establishment of methodoligies to obtain the frnndemental constants. Effects of wavelength, temperature, total available free carriers by doping types …

Modeling Of A Permeable Reactive Barrier, Guatam C. Ijoor

Theses

The focus of the presentstudy was centered on the modeling analysis to support the Permeable Reactive Barrier (PRB) design. The flow model formulated to simulate the Permeable Reactive Barrier System integrated the available geologic, hydro geologic and geo-chemical data from numerous recent installations to simulate a subsurface ground water scenario.

Different generic cases that a PRB system would fall into were identified based on its utility and aquifer conditions and then employed to produce different model adaptations. The different simulation codes and interfaces were evaluated, and the most expedient of them was used to simulate the Model.

The simulations were …

Variable Gain Control Of Brushless Dc Motor Control With Low Resolution Sensors, Chung-Hsiang Wang

Theses

In this work, feasibility of using low cost, low resolution sensor for high performance brushless dc (BLDC) motor speed control is investigated. Conventional control, using a tachometer or high resolution encoder, suffers from drawbacks such as high cost, large physical volume, and high sensor processing bandwidth. On the other hand, sensorless BLDC motor, appealing in its hardware simplicity, does not provide sufficient fast performance. Using a standard low resolution sensor, such as a hall sensor or commutation encoder, a compromise between cost and performance can be obtained. However, the use of a low resolution sensor does pose a challenge to …

Biomechanical Study Of Performance Of A Plugged Femoral Implant Coupled With A Trochanter Cable System Using Finite Element Analysis, Deanna Yvonne Carstarphen

Theses

A Finite Element Analysis was conducted to determine the effect of a plug on the performance of the critical section of a femoral implant coupled with a trochanter cable grip system. The critical section was defined near the proximal end of the stem where a hole was designed for the purpose of attaching the cable grip system. Two models were generated for the analysis. One consisted of the critical section with the grip cables and a plug filled in the hole and the other was without the plug. The models were based on design specifications provided by Howmedica Incorporated. Two …

Chemical Volatilization Of Heavy Metals For Waste Separation And Real Time Metals Analysis, Mohammad Nasr Ul-Alam

Theses

One of the major challenges in environmental analysis concerns the rapid and sensitive detection of metals emitted from combustion stacks. An interesting concept for real time analysis is to convert airborne metal oxide particles in a flow reactor into relatively volatile compounds of a single class, and then analyze in the gas phase. In this project, kinetics of chemical volatilization reaction between Sb₂O₃ and HCl was investigated. To achieve this a laboratory volatilization flow reactor was built and data was collected for the volatilization reaction in terms of conversion, inlet and outlet concentrations and flow rates. A …

Computer Automated Experimentation For The Control And Assessment Of The Classically Conditioned Eyeblink Response, Michael Terrence Bergen

Theses

The use of the classically conditioned eyeblink response, a form of associative learning, is a growing method of experimentation in modem science. This type of associative learning, has many features that make it useful for applications in the study of specific neurological functions. The goal of this project was to design and implement a software system for the automated control and on-line evaluation of a classical conditioning experiment for use with human subjects. A program was developed in the LabVIEW programming environment by National Instruments. Basic hardware components produce acoustic signals, deliver airpuffs, and sense and condition physiological responses. Safety …

Study Of The Effects Of Deuterium Implantation Upon The Performance Of Thin-Oxide Cmos Devices, Sumit Kishore

Theses

The use of ultra thin oxide films in modem semiconductor devices makes them increasingly susceptible to damage due to the hot carrier damage. Deuterium in place of hydrogen was introduced by ion implantation at the silicon oxide-silicon interface during fabrication to satisfy the dangling bonds. Deuterium was implanted at energies of 15, 25 and 35 keV and at a dose of 1x10¹⁴/cm². Some of the wafers were subjected to N₂O annealing following gate oxide growth. It was demonstrated that ion implantation is an effective means of introduction of deuterium. Deuterium implantation brings about a …

Mutual Interference Investigation Of Cebus And X-10 Powerline Signaling, Sajid Pallithotungal

Theses

Powerline control signaling using CEBus has great potential towards inexpensive home automation. CEBus transmits at 10 kBps using spread spectrum in the 100-400 kHz band while X-l0 sends 60 Bps using bursts of 120 kHz carrier on the power line. However, these two signals may destructively interfere when present simultaneously. X-10 is narrow band and interferes with the CEBus spread spectrum signal. This thesis looks into the mutual interference patterns of Power Line CEBus communication in the presence of X-l0 module signaling and visa versa. The investigation encompasses a series of tests and measurements on a Power Line CEBus-X10 test …

Ultrasound To Decontaminate Organics In Dredged Sediments, Kanya Veerawat

Theses

In this research, it was attempted to decontaminate and separate dredged sediments contaminated with organic compounds by the application of ultrasound energy coupled with sub-atmospheric pressures. The decontamination and separation of contaminated sediments was achieved by integrated two processes. For Process 1, ultrasound energy was used to decontaminate the sandy fraction in dredged sediments, and sub-atmospheric pressure was used to separate and remove fines. For Process 2, ultrasound was again used to decontaminate fines with bulk fluid, and sub-atmospheric pressure was used to remove the contaminants with water. Process 1 was evaluated and found to have four variables contributing to …

Study Of Reactive Media For Chromium Removal From Groundwater By Permeable Barriers, Hemant S. Desai

Theses

The purpose of the study was to select reduction media for application in permeable barriers for removing chromate ions from groundwater emanating from chromium refining sites in New Jersey. The high pH condition of groundwater in such sites is expected to pose limitations on the use of metallic iron (Fe⁰) as the sole reductive medium.

Reasonable reduction kinetics was achieved using iron at pH < 9.2. Several pH lowering media were investigated and were found to have either very slow or very fast dissolution kinetics, which rendered them impractical for use in passive permeable barriers. Two other media, namely: pyrite and siderite minerals have shown promising results, but fell short of achieving the required performance. Detailed investigation of interfacial processes in a batch reactor have shown that the addition of a small amount of a neutral salt can significantly improve chromate reduction kinetics, even at high pH conditions around 10.9.

The formation of passivating layers, which can slowdown the reaction significantly, was found to be important at high pH conditions. It is recommended that an injection system be used with the reactive barrier to …

Development Of Icejet Machining Technology, Dimitri V. Shishkin

Theses

This work was concerned with the application of ice powder for material processing. Material cutting and surface cleaning were also studied. As a result, innovative cleaning and etching technology was pioneered. The corresponding technology was designed and demonstrated.

The study involved investigation of water freezing, crushing of generated ice, ice transportation, formation of ice water and ice air streams and, finally, use of this stream for material cutting and cleaning. The theoretical work included investigation of the phase change in water and ice formation, effect of ice temperature on particles behavior and entrainment of ice particles by the water stream. …

Fundamentals Of Dry Coating In Fluidized Bed, Rakesh Iyer

Theses

This thesis is devoted to the study of a novel dry coating method in fluidized bed - Dry Coating of Particles in Spouted bed (DCPS). The main objectives of this work were to study the feasibility of the process, both quantitatively and qualitatively, and to compare the results with coating by conventional mechanical mixing. Aerosol mechanics is applied to account for the following: 1) collision between the guest and host particles in a spouted bed (analysis of guest-host particle inertial fluid-dynamic interaction), and 2) to show how collision efficiency of guest particles with host particles affects the coating efficiency. An …

Multi-Lifecycle Assessment Design Tools And Software Development, Ji Jin

Theses

This thesis introduces the concept of Multi-lifecycles and a Multi-lifecycle assessment (MLCA) methodology for evaluating the energy consumption and environmental emissions of a product. MLCA quantifies materials, energy, and environmental burdens associated with end-of-life options, as well as obtains the value of returning parts and materials back to use, through demanufacturing, reengineering and remanufacturing.

A Multi-lifecycle Assessment software is developed as a tool to implement MLCA methodologies. By this software, one can practice a full life-cycle analysis on a product, or compare the environmental impacts of different products. Detailed designs on MLCA software including the databases, user interfaces, and algorithm …