Engineering Commons^™

Fpga Implementation Of A Cholesky Algorithm For A Shared-Memory Multiprocessor Architecture, Satchidanand G. Haridas

Theses

Solving a system of linear equations is a key problem in the field of engineering and science. Matrix factorization is a key component of many methods used to solve such equations. However, the factorization process is very time consuming, so these problems have traditionally been targeted for parallel machines rather than sequential ones. Nevertheless, commercially available supercomputers are expensive and only large institutions have the resources to purchase them or use them. Hence, efforts are on to develop more affordable alternatives. This thesis presents one such approach.

The work presented here is an implementation of a parallel version of the …

Direct Simulation Of Electrorheological Suspensions Subjected To Pressure Driven Flow And Spatially Non-Uniform Electric Field, Arun Thankamony John Kadaksham

Theses

A numerical method based on the distributed Lagrange Multiplier method is developed for direct simulation of electrorheological (ER) suspensions subjected to pressure driven flows and spatially non-uniform electric fields. The flow inside particle boundaries is constrained to be rigid body motion by the distributed Lagrange multiplier method and the point-dipole approximation is used to model the electrostatic forces acting on the polarized particles. Simulations show that the particles move to the regions of high electric field when the value of β, the Clausius-Mossotti factor is positive and they move to the regions of low electric field when the value of …

Design Of An Fpga-Based Parallel Simd Machine For Power Flow Analysis, Tirupathi Rao Kunta

Theses

Power flow analysis consists of computationally intensive calculations on large matrices, consumes several hours of computational time, and has shown the need for the implementation of application-specific parallel machines. The potential of Single-Instruction stream Multiple-Data stream (SIMD) parallel architectures for efficient operations on large matrices has been demonstrated as seen in the case of many existing supercomputers. The unsuitability of existing parallel machines for low-cost power system applications, their long design cycles, and the difficulty in using them show the need for application-specific SIMI) machines. Advances in VLSI technology and Field-Programmable Gate-Arrays (FPGAs) enable the implementation of Custom Computing Machines …

Graphical User Interface For Improved Laser Eye Surgery, Venkata K. Kuruganti

Theses

This thesis develops a system for laser eye surgery that is a significant improvement over existing technology. The new system uses image matching and MEMS micromirrors to introduce feedback control, automation and record keeping to the laser surgery process, eliminating the unwanted effects of eye movement during surgery and introducing a wide range of other benefits. It is expected that this improvement can be implemented as an addition to existing systems as well as a foundation for new tools, perhaps even remote, internet enabled ones.

The basic components of the new system are described and demonstrated, including image matching between …

Detecting Malfunction In Wireless Sensor Networks, Pablito C. Lake

Theses

The objective of this thesis is to detect malfunctioning sensors in wireless sensor networks. The ability to detect abnormality is critical to the security of any sensor network. However, the ability to detect a faulty wireless sensor is not trivial. Controlled repeatable experiments are difficult in wireless channels. A Redhat Linux. 7.0 Wireless Emulation Dynamic Switch software was used to solve this problem.

Six nodes were configured with a node acting as a base station. The nodes were all part of a cell. This means that every node could communicate with all other nodes. A client-server program simulated the background …

Intrusion Detection System For Ad Hoc Mobile Networks Using Neighborhood Watch Theory, Ramani Rajagopalan

Theses

This study describes several experiments to simulate and study temperature sensor networks. The ultimate goal of this study is to accurately predict a temperature sensor failure in a sensor network, using Network Neighborhood Watch theory. Simulated temperature measurements are used to compare the results of accuracy, and quickness in detecting a failure in a malfunctioning sensor node. This is done by changing the intervals between temperature sampling, by considering different rates of temperature raise, as well as varying the number of nodes in the network neighborhood (deployment density). The thesis studies the threshold for temperature sensor failure by computing a …

Comparative Studies Of Network Traffic In Actual And Emulated Wireless Networks, Curtis Salley Jr.

Theses

Wireless networks are becoming more popular in all types of environments from home office, to business infrastructure, to mobile computing. As more of these networks flourish, so does the attraction for hackers. The thesis examines the bandwidth of wireless networks and the effects of intrusions in three different scenarios. First, it looks at a wireless network that is connected to a wired infrastructure. Next, the thesis examines a wireless ad hoc network and how bandwidth plays a valuable part in the communication with neighboring nodes. And finally, the thesis attempts to simulate a wireless network by using a bandwidth configuration …

Reduction Of False Positives In Fault Detection System Using A Low Pass Data Filter, Ranjit Salunkhe

Theses

Network traffic is bursty in nature and exhibits the property of self-similarity, the degree of which is measured by the Hurst parameter. Now, in any network there is always the possibility of the occurrence of fault traffic that can be caused due to faults or malfunction of a network component. Fault Detection Systems that check for traffic anomalies can trigger off an alert on the detection of any traffic behavior that deviates from normal. Such deviation is usually caused when a fault occurs. But in network traffic sudden bursts may occur due to the inherent behavior of a network application. …

Sub-Segment Based Transport Layer Protocol For Wireless Medium, Som Sengupta

Theses

This thesis discusses the techniques to improve the TCP over wireless. The loss-intensive wireless communication results in high retransmission rates to recover lost packets and bandwidth consumption. In addition, the retransmitted segments have significant chance of being dropped. To make the retransmission process more granular, large segments at the transport layer (540 bytes, by default) can be subdivided into smaller sub-segments. This document introduces a split TCP based solution and describes how to produce a series of smaller-sized segments that share the same transport layer header. A new header format is introduced to support the transmission of smaller segments …

Low-Power Transceiver Design For Mobile Wireless Chemical Biological Sensors, Harshavardhan Reddy Sripuram

Theses

The design of a smart integrated chemical sensor system that will enhance sensor performance and compatibility to Ad hoc network architecture remains a challenge. This work involves the design of a Transceiver for a mobile chemical sensor. The transceiver design integrates all building blocks on-chip, including a low-noise amplifier with an input-matching network, a Voltage Controlled Oscillator with injection locking, Gilbert cell mixers, and a Class E Power amplifier making it as a single-chip transceiver. This proposed low power 2GHz transceiver has been designed in TSMC 0.35~lm CMOS process using Cadence electronic design automation tools. Post layout HSPICE simulation indicates …

Analysis Of Random Packing Of Uniform Spheres Using The Monte Carlo Simulation Method, Sai S. Tulluri

Theses

The study of random packing of spheres has had a long history. It particularly interests many researchers because randomly packed hard spheres exhibit some features of the properties of simple liquid, e.g. the packing density and the radial distribution. Many researchers have studied random packing both experimentally and also by using computer simulation.

Monte Carlo simulation method was used to generate random loose packing of hard spheres. Packing characteristics like packing density, radial distribution function, co-ordination, angular distribution and fabric tensor have been computed for this packing system.

The packing density for a system of 8000 particles with a diameter …

Addition Of A Chain-Cell Search Method And A Van Der Waals Force Model To A Particle Dynamics Code, Michael J. Sweetman

Theses

This project studies the implementation of a computational time saving technique and adds an additional force model into a discrete element method simulation code. Both aspects of the project are focused on increasing the versatility of an existing particle dynamics code by increasing the execution speed and available force models for simulation.

The first portion of the project consisted of adding a function to the collision detection mechanism to hash the particles into a spatial grid. This hashing function allows a search for near neighbor particles to be restricted to the space immediately adjacent to the particle of interest, thereby …

Soft Fault Detection Using Mibs In Computer Networks, Sachin Arora

Theses

To improve network reliability and management in today's high-speed communication system, a statistical anomaly network intrusion detection system (NIDS) has been investigated, for network soft faults using the Management Information Base (Mm) traffic parameters provided by Simple Network Management Protocol (SNMP), for both wired and wireless networks. The work done would be a contribution to a system to be designed MIB Anomaly Intrusion Detection, a hierarchical multi-tier and multiobservation-window Anomaly Intrusion Detection system. The data was derived from many experiments that had been carried out in the test bed that monitored 27 MIB traffic parameters simultaneously, focusing on the soft …

Optimization Of Very Early Strength Concrete Mixes Using Maturity Method, Sun Punurai

Theses

Fast track concrete technology has been used over the past two decades for overnight highway repairs. Originally, fast track was concerned only with rapid strength gain and workability but little concern was paid to cost and durability of the concrete.

The purpose of this research study is to develop a current improved very early strength (VES) concrete mix, which was accepted by NJDOT in 1996. More than 50 concrete mixes were evaluated for strength, shrinkage, and curing rate (maturity), eventually leading to the development of an optimized VES concrete mix with improved performance characteristics.

The study has developed the new …

Tracking The Path Of A Mobile Radioactive Source Using A Wireless Sensor Network, Nipa Shah

Theses

This report describes several experiments used to characterize and test a network of radiation sensors. The purpose of these tests is to assess the feasibility of using these sensors to detect and track radioactive sources in a large field, as in a battlefield or on a military campus. Simulated radiation measurements are used to compare the result of radiation detection accuracy in tracking the moving target and to find its path as early as possible. This is done via changing the number of sensing nodes deployed (deployment density), as well as the models of the detectors. This thesis describes algorithms …

Process-Structure-Property Relationship Of A Mesogenic Bioerodible Polyarylate, Seung Uk Yoo

Theses

Polymeric biomaterials are artificially synthesized polymers designed for in-vivo use. The material must be characterized and should satisfy the requirements suitable in human bodies.

For the proper characterization of materials, it is essential to apply specific processes, analyze thermal and mechanical properties, and understand the process effect and the morphology. Thermal analysis is one of the most sophisticated and well developed techniques for polymer characterization. Turi [ 1 ] has explained about the thermal characterization of polymeric materials. Jaffe et al [2], in the chapters of characterization of fibers and films, emphasized the effect of the process history of a …

Modification Of Biodegradable Polyesters With Inorganic Fillers, Georgia Chouzouri

Theses

In attempts to address the growing need of materials with controlled degradation characteristics and good mechanical properties for tissue engineering applications, composites based on biodegradable polymers and a potentially bioactive novel inorganic synthetic filler were produced and characterized. Composites were produced by solution mixing of a commercial polylactic acid, as well as a biodegradable thermoplastic polyester based on butylene adipate/succinate, with synthetic magnesium/aluminum carbonate minerals, known as hydrotalcites. Two types of hydrotalcites, at 30 wto/o filler level, were used: surface coated and uncoated. Composites were also melt-mixed in a twin-screw extruder for comparison.

Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), …

Data Recording And Analysis Of American Sign Language, Robert Michael Demarco

Theses

American Sign Language (ASL) is a form of communication that is used by the Deaf. It consists of hand shapes and gestures to express words and phrases. Translators on the market today consist of interpreting a simple form of ASL known as finger spelling. In order to develop a more effective translator, instrumentation was developed utilizing a Flock of Birds and Cyberglove system to record in hand shapes and movements in a LabVIEW environment. Experimentation done included reading in data and subjectively analyzing the data recorded for accuracy. Initial results have show that the instrumentation worked and data was recorded …

Sparse Matrix Product Implementation On Field Programmable Gate Arrays (Epgas), Amit Mahendra Sheth

Theses

If dense matrix multiplication algorithms are used with sparse matrices, they can result in a large number of redundant calculations, as numerous elements in sparse matrices are zero valued, thus available resources and time may be wasted. The algorithm discussed here aims to take advantage of the sparseness of the matrices by multiplying only nonzero elements.

The NIOS development board from Altera is used for implementing the above algorithm. First a sequential program in the C programming language is downloaded onto the FPGA and run by the NIOS soft-processor. Then the same board is also used for a parallel implementation …

Implementation Of Cyclic Exercise Protocol On Two Study Groups - Aids And Insomnia, Ujwala G. Kalambur

Theses

Traditional exercise regimens are based on maintaining a prolonged increase in heart rate, followed by a single recovery period. The Cyclic Exercise Protocol is a novel protocol that is designed to create a series of parabolic waves of exercise and recovery. This study involves the implementation of this exercise protocol on two study groups namely AIDS and Insomnia. This exercise protocol involves short bursts of exercise lasting for 60 seconds or less followed by a period of complete aerobic recovery. The underlying principle of this exercise protocol is that rest, recovery and the body's natural rhythm are important to fitness …

Discrete Element Simulation And Nonlinear Dynamic Analysis Of Particles In A Simple Lattice Structure, Liam E. Buckley

Theses

The study of particles interacting in lattice structures allows for insight into the complex interactions of granular flow, and the adaptation of such structures to mechanical apparatuses to handle the separation of bulk particulate matter. Applying methods of computer analysis to the interactions taking place within the particle-lattice system provides a particle level methodology to the study of the phenomenon taking place, as well as a stepping stone for future design of related devices.

A two prong approach is presented to the study of such particle-lattice systems. The first approach is composed of adapting an existing discrete element computer code …

The Development Of A Biodegradable Scaffold For A Tissue Engineered Heart Valve, Thomas Adam Alheidt

Theses

In the current state of medical technology, there exists the need for a quality medical device to replace a failing heart valve. Presently, mechanical valves as well as donor tissue valves, either from humans or animals are used to replace failing heart valves. These valves although they can operate in the heart satisfactorily are not equal to the body replacing its own valve. Tissue Engineering in simple terms is the field of helping the body replace its own failing organ. In scientific terms, Tissue Engineering is a relatively young field, a majority of the major advancements have come in the …

Firewall Interface For Java Ftp Smtp And Http Servers, Ratan Kumar Erukulla

Theses

The objective of my thesis is to develop a firewall interface for FTP, HTTP and SMTP servers. A firewall interface is a graphical user interface (GUI) to configure the properties of the server. Using this interface, we can spy a user, block and unblock the IP address of a client, display statistics of user and server. We can track all the user actions while he is connected to the server. These actions are logged and based on the log data we can deny access to users performing illegal operations. All the servers and interfaces are written in Java. Java was …

In Situ Laser Etch-Depth Monitoring Of The Deep Reactive Ion Etching Process, Yuki Imura

Theses

A laser-based method for measuring feature thickness during the deep reactive ion etching process is investigated. Interference occurs between laser beam reflections from the mask surface, the mask/silicon interface, and the exposed silicon surface of a process wafer. Information from this interference signal allows the etch process to be characterized. Three methods are investigated: laser-on-SiO₂, laser-on-photoresist, and laser-on-both SiO₂ and silicon at a mask edge.

The measured data from these experiments are found to be in good agreement with theoretical calculations. Differences in reflected beam amplitude and interference fringe frequency represent well the differences SiO₂ and …

Vlsi Design Of Stability Routing Protocol For Sensors In Wireless Mobile Ad-Hoc Networks, Vishnu M. Mandava

Theses

This thesis gives a detailed description of the Application specific integrated circuit (ASIC) design of Stability routing protocol for sensors in mobile ad-hoc networks. The Stability routing protocol is based on the signal strength and position components during data transmission while considering sensors in an ad-hoc network. A general ad-hoc network has unpredictable and variable mobility patterns therefore the signal strength criteria is adopted for routing. Signal strength criteria has been proved to be efficient for communication between the mobile nodes without any data loss. In this thesis an architecture for a processor implementing stability routing protocol for effective communication …

Numerical Study Of Pneumatic Conveying Of Powders, Muhammad Mushahid Rafique Quereshi

Theses

The dense phase mode may be advantageous over the dilute phase mode, for some pneumatic conveying problems, because it causes less erosion of the pipeline, less attrition of the material, requires less dust collection and is effective even for smaller pipe diameters. The objective of this study is to numerically determine the parameters that govern the formation slugs in dense phase conveying. The distributed Lagrange multiplier/fictitious domain method (Glowinski et al. 1998 and Singh et al. 2000) is used to perform direct simulations of the motion of solid and gas phases in pipes with rectangular cross-sections. In this approach the …

Integrating Tolerances In G And M Codes Using Neural Networks, Vijay Kumar Sundareshan

Theses

Continuous integrated solutions from CAD down to the preparation of NC programs were developed in the recent years. However, if tolerances should be considered, the interaction of human experts is still necessary. A way to fill this gap in the production process is shown in this thesis. The study builds a relationship between the given design tolerances and including these tolerances in machining by generating respective G and M codes. The study focuses on physical phenomena and their inter-relationship while manufacturing. For example how the speed of machining, torque, power, depth of cut, etc. influences machining under specified tolerances. Artificial …

Electrohydrodynamical Manipulation Of Particles Based On Dielectrophoresis, Oleksii Vasylyschuk

Theses

The movement of matter in a non-uniform electric field, termed dielectrophoresis, is of interest to scientists of various branches: physics, chemistry, engineering, and life science. To chemists and physicists it is a science of many varied phenomena. To engineers it is a source of new and useful techniques for separating materials or improving materials’ behavior. To ecologists it provides a major means of minimizing pollution. To life scientists it offers new ways to study and manipulate cells and their subparticles, and to help unravel the nature of living systems.

The purpose of this thesis is to concentrate on some aspects …

Implementation Of A Two-Dimensional Discrete Element Method To Describe Granular Materials Composed Of Elliptical Cohesionless Particles, Juan Jose Martinez Alvez

Theses

This work is aimed at developing a discrete element simulation that models the contact between elliptical grains or particles in granular materials. The goal is to implement an algorithm to carry out collision detection between ellipses as well as ellipsoidal objects. The practical issue here is that the real shape of macroscopic grains can be approximated better using elliptical curves than using spherical curves. In addition, the simulation model will also be valid for spheres, since these objects are special cases of ellipsoids.

An accurate contact detection algorithm was investigated by means of two different formulations. The first formulation determines …

Liquid-Liquid Mixing In Stirred Tanks With Varying Liquid Depths, Sunil Mehta

Theses

Considerable attention has been devoted in the past to the determination of the minimum agitation speed, N_cd, required for the complete dispersion of two immiscible liquids in mechanically stirred tanks. When this situation is achieved the dispersed phase is no longer present as a distinct layer, such as a light oil phase above an aqueous solution, but becomes completely dispersed, in the form of droplets, throughout the continuous phase. The achievement of the dispersed state is of significant importance in many industrial operations. Nevertheless, the effect on N_cd of a number of operating variables remains poorly understood. …