Engineering Commons^™

Tailoring The Mechanical And Optical Properties Of Silicon-Niobium-Nitride Composite Coatings, Cristian Orozco

Open Access Theses & Dissertations

Nitride nanocomposite thin films have generated significant attention as a result of their robust mechanical properties, excellent triobology, and good chemical (corrosion) stability. Due to their excellent hardness and high wear resistance NbN coatings have found use in a wide variety of applications such as the coating of cutting tools and to strengthen the surface mechanical properties of superconducting cavities. The mechanical properties of NbN can be further improved through mixing with Si3N4, leading to the formation of a nanocomposite structure. NbN-Si3N4 nanocomposite coatings have been actively studied due to their high hardness, high elastic modulus, and high resistance to …

Development And Implementation Of The Triac Data Acquisition And Control System, Raymundo Mendivil Rojo

Open Access Theses & Dissertations

The Technology Research and Innovation Acceleration Park (tRIAC) located at Fabens, Texas, was established for the ongoing development and testing of the miro center for Space Exploration and Technology Research’s (cSETR’s) liquid methane and liquid oxygen rocket engines. These engines range from a 5 lbf Reaction Control Engine (RCE) to the 500 lbf and 2000 lbf Centennial Restartable Oxygen Methane Engines, called CROME and CROME-X respectively. Alongside their development, a comprehensive control system was built in the Modular Instrumentation and Control Interface Trailer (MICIT) and is equipped with National Instrument’s LabVIEW software and hardware. The LabVIEW code is based off …

Dedicated Hardware For Machine/Deep Learning: Domain Specific Architectures, Angel Izael Solis

Open Access Theses & Dissertations

Artificial intelligence has come a very long way from being a mere spectacle on the silver screen in the 1920s [Hml18]. As artificial intelligence continues to evolve, and we begin to develop more sophisticated Artificial Neural Networks, the need for specialized and more efficient machines (less computational strain while maintaining the same performance results) becomes increasingly evident. Though these “new” techniques, such as Multilayer Perceptron’s, Convolutional Neural Networks and Recurrent Neural Networks, may seem as if they are on the cutting edge of technology, many of these ideas are over 60 years old! However, many of these earlier models, at …

Data-Driven Predictive Framework For Modeling Complex Multi-Physics Engineering Applications, Arturo Schiaffino Bustamante

Open Access Theses & Dissertations

Computational models are often encountered in multiple engineering application, such as structural design, material science, heat transfer and fluid dynamics. These simulations offer the engineers the capability of understanding complex physical situations before putting them to practice, either through experimentation or prototyping. The current advances in computational sciences, hardware architecture, software development and big data technology, have allowed the construction of sturdy predicting frameworks for analyzing a wide array of natural phenomena across different disciplines, either through the implementation of statistical methods, such as big data, and uncertainty quantification, or through high performance computing of a numerical model. The objective …

Parallelization And Scalability Analysis Of The \\[1pc] 3d Spatially Variant Lattice Algorithm, Henry Roger Moncada Lopez

Open Access Theses & Dissertations

The purpose of this research is to design a faster implementation of an algorithm to generate 3D spatially variant lattices (SVL) and improve its performance when it is running on a parallel computer system. The algorithm is used to synthesize a SVL for a periodic structure. The algorithm has the ability to spatially vary the unit cell, the orientation of the unit cells, lattice spacing, fill fraction, material composition, and lattice symmetry. The algorithm produces a lattice that is smooth, continuous and free of defects. The lattice spacing remains strikingly uniform even when the lattice is spatially varied. This is …

An Integrated Study Towards Curing Neurodegenerative Disorders Using Materials Science And Stem Cell-Based Tissue Engineering Approaches, Nishat Tasnim

Open Access Theses & Dissertations

Neurodegenerative diseases affect around one billion people globally that are characterized by irreversible degeneration of brain tissues. These diseases cause serious effects on patients degrading their brain functions and causing enormous physical and mental health issues. Parkinson's disease (PD) is one of the most common neurodegenerative disorder affecting millions of people worldwide which results from loss of dopaminergic (DA) neurons in the mid-brain. Unfortunately, no medical treatment is effective to date for these significant brain disorders, except some symptomatic therapies only focusing on improving the quality of patient's life.

Two current approaches hold great promise in targeting PD as well …

Assessing Corrosivity Of Galvanized Soil Reinforcements From Electrochemical Tests, Diana Alejandra Cabrera

Open Access Theses & Dissertations

The accurate estimation of the service lives of mechanically stabilized earth (MSE) walls requires a proper evaluation of the corrosion potential through electrochemical test methods. Robust field tests are required to assess the corrosivity of galvanized metal used in MSE walls. To simulate an environment similar to an MSE wall, cylindrical soil specimens about 12 in. (300 mm) in diameter and 10 in. (250 mm) in height were constructed. For every specimen, two instruments were used. The first instrument measured the polarization resistance corrosion tests carried out on galvanized strips and meshes, as well as epoxy-coated rebars. The second instrument …

High Recovery Inland Desalination: A Technical And Economic Performance Evaluation Of Zero Discharge Desalination And Other Technologies, Malynda Aragon Cappelle

Open Access Theses & Dissertations

Increasing population and diminishing freshwater resources are leading to increased competition between users of freshwater, both in terms of surface water and groundwater. Desalination can augment the water supply, but conventional approaches like reverse osmosis are usually limited to 70-80% recovery. Inland brine disposal options are often limited, presenting significant technical and economic obstacles to implementing desalination technology. In comparison to conventional desalination technologies, high recovery desalination methods such as Zero Discharge Desalination (ZDD) offer substantially higher potable water yield (i.e., 95-98%) from brackish water. ZDD is a hybrid process that combines reverse osmosis (RO) or nanofiltration (NF) with electrodialysis …

Improving Time-Of-Flight And Other Depth Images: Super-Resolution And Denoising Using Variational Methods, Salvador Canales Andrade

Open Access Theses & Dissertations

Depth information is a new important source of perception for machines, which allow them to have a better representation of the surroundings. The depth information provides a more precise map of the location of every object and surfaces in a space of interest in comparison with conventional cameras. Time of flight (ToF) cameras provide one of the techniques to acquire depth maps, however they produce low spatial resolution and noisy maps. This research proposes a framework to enhance and up-scale depth maps by using two different regularization terms: Total Generalized Variation (TGV) and Total Generalized Variation with a Structure Tensor …

Design And Experimental Study Of A High Pressure And Supercritical Methane-Oxygen Burner, A S M Arifur Rahim Chowdhury

Open Access Theses & Dissertations

Directly heated supercritical oxy-fuel power cycles have potential to offer a higher thermal efficiency and lower pollutant emissions compared to existing power cycles. Recent thermodynamic analysis of the cycle performed by several groups including the UTEP-Air Liquide research team show that combustion in the vicinity of 300 bar pressure and 1000-1400 K temperature allows for relatively high system efficiencies while operating within the limit of practical combustor materials. However, the realization of directly heated supercritical power cycle requires combustion systems be designed to operate in supercritical conditions and at temperature far below the blowout limit of conventional flames (above 1500 …

Interference Analysis And Mitigation Of Telemetry (Tm) And 4g Long-Term Evolution (Lte) Systems In Adjacent Spectrum Bands, Juan Francisco Gonzalez

Open Access Theses & Dissertations

Currently, the telecommunications, radio systems, and many other wireless services in the United States are using the spectrum from the 6 kHz to the 300 GHz frequencies. Although it may seem enough for said systems, as more users and devices are being introduced into the market, the spectrum is limiting the faster introduction of these devices and/or systems. The radio frequency spectrum is home to many transmissions, from amateur radio to cellphone applications, which all share similar frequency bands. By sharing, the number of applications can be increased in a single band, but their performance may be affected. Herein, experiments …

Additive Manufacturing Of Multi-Functional Nanocomposites For Sensor And Energy Storage Devices, Hoejin Kim

Open Access Theses & Dissertations

The goal of this research is to develop novel 3D printing process and design nanocomposites for piezoelectric and dielectric devices using fused deposition modeling (FDM) and stereolithography (SL) 3D printing techniques for use in sensor and energy storage applications. Techniques for electric and corona assisted in-situ poling during 3D printing were developed to improve the piezoelectric property and ease of manufacture. Poly(vinylidene fluoride) (PVDF) and barium titanate (BaTiO3, BT) are well-known for their high piezo- and dielectric constants among polymers and ceramics, while multi-walled carbon nanotubes (CNTs) were introduced to improve efficiency of stress reinforcement and conductivity for charge carriers …

Design And Simulation Of Mems Actuators To Study Strain Behavior Of 2d Materials, Mariana Martinez

Open Access Theses & Dissertations

Since the 60s the semiconductor industry has successfully been able to keep pace with Moore's Law due to the effective scaling of the silicon-based transistor. However, as scaling technology improves, passive power density has begun to dominate the overall power consumption of transistors. The inability to scale power density alongside the decreasing transistor dimensions has hindered the efficiency trend observed in the last decades. Thus, new alternatives have been researched to overcome the current power crisis. Micro-electro-mechanical system (MEMS) actuators offer excellent on/off ratios with very steep transitions. Furthermore, two-dimensional transition-metal dichalcogenide (TMD) materials have been studied due to their …

Characterization Of 3d Printed Polylactic Acid/ Polycaprolactone/Titanium Dioxide Composites For Bone Replacement And Grafting, Sandra Elena Najera Beltran

Open Access Theses & Dissertations

A material that mimics the properties of bones was developed by optimizing the ratio of polymer composites of polylactic acid (PLA) and poly-ε-caprolactone (PCL), containing small amounts of titanium oxide (TiO2). Although titanium-based alloys have commonly been used for bone replacement procedures due to their biocompatibility with the human body and their mechanical properties, stress shielding continues to be a problem. The structure of a bone has a porosity which permits the flow of nutrients, blood, oxygen and minerals, and is an issue at the time of creating bone replacements using conventional methods. PLA and PCL have been used in …

The Design Of A Rocket Propulsion Labview Data Acquisition And Control System, Dylan Allan Ott

Open Access Theses & Dissertations

When designing a rocket engine, both the propulsion system and propellant choice(s) are an important deciding factor. Desired rocket engine behavior, specific impulse, and levels of thrust are all different between the various propulsion systems. A bi-propellant cryogenic liquid 5lbf, 500lbf, and 2000lbf rocket engine was designed and manufactured by UTEP. The 5lbf rocket engine is a Reaction Control Engine and the 500lbf and 2000lbf rocket engine is a throttleable Main Engine. To provide a reliable and safe data acquisition and control system for this experiment, a Real-Time control platform was needed. A compact DAQ system was purchased and configured …

Exploring The Effects Of Zinc Nanoparticle Concentration, Antioxidant, And Media On Cilantro (Coriandrum Sativum), And Radish (Raphanus Sativus) Plants Growth, Venkata Laxma Reddy Pullagurala

Open Access Theses & Dissertations

Engineered nanomaterials (ENMs) have proven to be one of the emerging chemicals of concern in the contemporary times. Soil acts as one of the major sinks of these ENMs. Reports have shown that ENMs have varied effects on soil biota. Particularly, their effects on plants are inconsistent. Amongst these ENMs, ZnO nanoparticles (nZnO) are the fourth largest raw materials in the nanotechnology industry. Globally, it is estimated that around 34,000 tons of n ZnO are utilized per year. The nZnO exposure on terrestrial plants yielded both beneficial as well as detrimental effects. Recently, there is an emerging evidence about the …

Solvent And Concentration Effects Governing The Hierarchical Organization Of Asphaltenes: A Small-Angle X-Ray Scattering Study, Hasan Rejoanur Rahman

Open Access Theses & Dissertations

Asphaltenes are a group of planar molecules found in crude oil and are prone to aggregation which often causes blockage of pipes along the oil production stream resulting a huge economic downside. In an effort to understand the hierarchical organization of asphaltene in different solvents and concentrations, the solution structure of various asphaltene solutions were studied using small-angle x-ray scattering (SAXS). Solvents were chosen based on miscibility maps. Such maps are generated on the critical value of the solubility parameter difference between asphaltenes or asphaltene components, and a range of solvents. The critical factors that affect asphaltene and asphaltene component …

Evaluation Of Powdered Activated Carbon For Control Of Taste And Odors Caused By Geosmin, Anthony Joe Rodriguez

Open Access Theses & Dissertations

The primary sources of taste and odor problems associated with surface water supplies spawn from algae and bacterial blooms that secrete odorous chemicals such as Geosmin and MIB. These musty, odorous, organic compounds are usually detectable by the human nose at concentrations of 5 to 10 ppt and can create considerable concern by consumers that can lead to complaints and misconceptions of odors as a water quality problem. Typically, since chemical or ozone treatment can be costly, activated carbon (powdered or granular) is generally employed in the process of removing organic compounds, such as Geosmin and MIB. The research presented …

Superpixel-Based Unsupervised Hyperspectral Unmixing, Jiarui Yi

Open Access Theses & Dissertations

Recently, superpixel-based approaches have been proposed for hyperspectral unmixing. The basic assumption of this approach is that the superpixel over-segmentation segments the image into small homogeneous areas. A low-dimensional (LD) image representation is obtained by using the average of the superpixels, which are then used in other image processing tasks up the processing chain. Due to superpixel-segmentation algorithm limitations, the region inside a superpixel may not be homogeneous. Therefore, the average may not be an adequate representation for the superpixel, leading to inaccuracies in the low dimensional representation resulting in errors in the image processing tasks or analysis. Here we …

Application Of The Positive Deviance Method Within The Field Of Product Design, Cesar Esteban Venegas

Open Access Theses & Dissertations

Positive Deviance (PD) is a method for social innovation that identifies and utilizes the knowledge found from statistical outliers within at-risk communities who succeed against all the odds, despite not having access to any additional resources. The PD method draws striking similarities to a product design methodology know as Human-Centered Design in which they share very similar principals. Similarities include the importance each method places on identifying the correct problem to address. Since it is not clear, from prior research, if the PD method is useful in the field of product development, this research seeks to explore this possibility. The …

Assessment Of Climate Change Impact On Hydraulic Design Procedures Of Bridges, Anjuman Ara Akhter

Open Access Theses & Dissertations

The significant change in climate is evident from the records of increased temperature, changed precipitation pattern, increased frequency of extreme weather events like storms, floods, and so forth. Like other infrastructure highway infrastructures also suffer the consequences of these climate change. Since the hydraulic design of these infrastructures is performed using historical climate data, the designs may not be able to provide services because designs are not considering climate change influence especially in terms of precipitation intensity. This study aims at identifying the most accurate source of climate database that predicts future climate change with less uncertainty and links them …

Constitutive Model Development For Additive Manufacturing, Diana Berenice Montes

Open Access Theses & Dissertations

Additive manufacturing (AM) is known worldwide for revolutionizing the development of three-dimensional modeling by reducing the time and increasing the precision of parts. For Powder Bed Fusion research is necessary to reduce concerns in residual stress, porosity and cracking in AM parts. A constitutive model was created in Abaqus to validate material properties of 3D printed Al 6061. Finite element analysis was performed to investigate how properties may affect in the modification of parameters to reduce printing imperfections. Research was made as well in polylactic acid properties for material extrusion to explore its behavior for creep and relaxation. Properties were …

Evaluation Of Brackish Water Desalination By Membrane Capacitive Deionization Systems: Performance Tradeoffs In Salt Removal, Hydraulic Recovery, Charge Efficiency, And Specific Energy Consumption, Oluwaseye Michael Owoseni

Open Access Theses & Dissertations

As potable water demand continues to exceed availability in several regions of the world, alternative water sources such as desalination and direct potable reuse have become of high importance in water sustainability discussions. The conventional desalination technologies include reverse osmosis (RO) and thermal distillation. Major barriers to the applicability of these technologies for desalination include inorganic scaling (RO) and high energy requirements respectively. This research provides an evaluation for the feasibility of Membrane Capacitive Deionization (MCDI), which is a technology gaining interest due to its theoretically low energy requirements for brackish water (less than 3 g/L) desalination. The motivation for …

Effects Of Unweathered Or Soil Weathered Copper-Based Nanoparticles And Compounds On Soil Grown Bell Pepper (Capsicum Annuum) And Spinach (Spinacia Oleracea) Plants, Swati Rawat

Open Access Theses & Dissertations

Engineered nanoparticles (ENPs) find large scale industrial application because of their promising chemical, physical, electrical, magnetic, optical, and electronic properties. Copper-based ENP are used as gas sensors, in catalysts, electronics, semi-conductors, and in agriculture. They have been useful as agricultural amendments in the form of pesticides, herbicides, and fertilizers because of their antifungal and antibacterial properties. They also find application in electronics and sensors used in precision agriculture. Due to their massive production and use, ENPs are likely to be ubiquitous in the environment around us in the near future. Application of biosolids for fertilization and water from wastewater treatment …

Effects Of Air And Other Gases In The Stabilization Process Of The Superprotonic Phase Of Cesium Dihydrogen Phosphate Within A Hermetically Sealed Chamber, Israel Martinez

Open Access Theses & Dissertations

The solid acid CsH2PO4 (CDP), exhibits a sudden increase in its proton conductivity as it’s heated above a certain temperature (around T~235oC), which makes it a very attractive candidate to be used as an electrolyte in intermediate temperature fuel cells. Unfortunately, at these temperatures the sample is not stable, as starts to dehydrate; which causes a dramatic drop in the proton conductivity over a short period of time (less than one hour). In order to inhibit, or at least delay, the dehydration process, the solid acid it’s put under a saturated water vapor atmosphere. Another method to stabilize the highly …

Influence Of Mix Design Parameters On Performance Of Balanced Asphalt Mixtures, Luiza Helena Barros

Open Access Theses & Dissertations

With the popularity of the Balanced Mix Design (BMD) concept, the need for performance tests that can reliably evaluate the cracking and rutting potentials of asphalt concrete (AC) mixes has become more critical. A great deal of effort has been focused on incorporating test methods that can potentially improve the current AC mix-design processes and consequently screen underperforming AC mixes. However, the influence of mix design parameters on the performanceof BMD mixes that provide pavement engineers and designers with thorough guidelines and a reliable and consistent test protocol has not been extensively documented.

This Thesis presents an experimental evaluation of …

Implementation Of Magnesium Alloy Az91d On Wire And Arc Additive Manufacturing, David Adrian Martinez Holguin

Open Access Theses & Dissertations

As progress on Additive Manufacturing (AM) techniques focusing on ceramics and polymers evolve, metals continue to be a challenging material to manipulate when fabricating products. Current methods, such as Selective Laser Sintering (SLS) and Electron Beam Melting (EBM) face many intrinsic limitations due to the nature of their processes. Material selection, elevated cost and low deposition rates are some of the barriers to consider when one of these methods is to be used for the fabrication of engineering products. The research here presented demonstrates the use of a Wire and Arc Additive Manufacturing (WAAM) system for the creation of metallic …

Optimization For The Allocation Of Funds For Pavement Maintenance In Pavement Management Systems, Armando Ramirez

Open Access Theses & Dissertations

Pavement maintenance and rehabilitation are critical and costly elements for highway agencies. A challenge for transportation agencies is to preserve roadways in an appropriate condition and extend the pavement service life while maintaining the safety and satisfaction of its users, and maximize the benefits obtained by the repair investments. Pavement maintenance programming is increasing in complexity due to limited resources and increments in traffic and population. Management decisions are usually based on personal judgment by pavement managers and sometimes those decisions are not even supported by previous experience. Research shows that optimization methods can produce significant benefits when transportation agencies …

A Comparative Study Characterizing Traffic Related Air Pollutant Concentrations At Near-Road Communities In El Paso, Texas, Adan Rangel

Open Access Theses & Dissertations

Numerous scientific studies have demonstrated the influence of traffic related air pollution at near-road communities and the associated health risks for these populations. This study uses on-site air quality monitors to characterize air pollutants at near-road schools in El Paso, TX to understand children's exposure to traffic-related air pollutants. Ambient air monitoring stations were installed at Coldwell Elementary, Bliss Elementary, and a residential house located in close proximity to major inter-state roadways. In this study, air quality data for PM2.5, PM10, NO2, and O3 was collected over a period of nine weeks in Fall 2018. The spatial and temporal variability …

People Detection From Time-Of-Flight Imagery With Inpainting-Based Preprocessing, Basavarajaiah Totada

Open Access Theses & Dissertations

The Thesis describes a method of detection and tracking of people using depth images captured by a Time-of-Flight (ToF) camera, such as those obtained with a Microsoft Kinect V2. Key advantages of this approach are that the identity of people is not disclosed, and the system can operate in low-light conditions. The automated approach developed here is inspired by cell-tracking methods as implemented in the well-known biomedical imaging software called CellProfiler. Our approach involves significant preprocessing of the depth images by a combination of adaptive center weighted median filtering and iterative inpainting. The next step is detection of each person's …