Engineering Commons^™

Development Of A New Evolutionary Algorithm Based On Adaptive Echolocation Applied To A Multi Objective Version Of The Redundancy Allocation Problem, Karla Rocio Gutierrez

Open Access Theses & Dissertations

The intention of this research is to develop a new algorithm that it is mainly focus in the principle of echolocation or also called biosonar. This principle is active in many animals such as: birds, shrews, dolphins and bats, these last ones are going to be a fundamental part of our study. These animals use it as radar in order to find food, obstacles or just to locate objects.

These animals use ultrasound beams with a certain degree of angle and multiple receivers; such as the two ears that are located slightly apart, so at the time of the returning …

Solving The Partial Differential Equation Of Vibrations With Interval Parameters Using The Interval Finite Difference Method, Brenda G. Medina

Open Access Theses & Dissertations

Accuracy and efficiency are among the main factors that drive today's innovative disciplines. As technology rapidly advances, efficiency takes on new meanings but what about accuracy? How accurate is accurate? Human error, uncertainties in measurement, and rounding errors are just some causes of inaccuracy. Interval Computations is an area that allows for such issues to be taken into account; for each measurement attained (for example), an interval can be built by considering the error associated with the measurement, and such an interval can be utilized in the mathematical computations of interest.

We consider the partial differential equation (PDE) of vibrations …

Evaluation Methods For Health Monitoring Of Aerospace Structure Rotary Joints, Sergio Armando Navarro

Open Access Theses & Dissertations

In September 2007, the excessive vibrations played a significant role in the station operation since one of the rotary joints, which provides the station electrical energy, presented an anomaly. The replacement of its bearing components and re-lubrication were necessary to reduce the problem. To avoid a new anomaly, the inspection of the rotary joints performance continues by using the accelerometers data. This thesis presents three new approaches to monitor the vibrations at the International Space Station based on Root-Mean-Square, kurtosis, and Approximate Entropy (ApEn). MATLAB functions and codes were necessary to implement the three monitoring techniques results from the provided …

Aerosol Characterizaton In El Paso-Juarez Airshed Using Optical Methods, Angel E. Esparza

Open Access Theses & Dissertations

The assessment and characterization of atmospheric aerosols and their optical properties are of great significance for several applications such as air pollution studies, atmospheric visibility, remote sensing of the atmosphere, and impacts on climate change. Decades ago, the interest in atmospheric aerosols was primarily for visibility impairment problems; however, recently interest has intensified with efforts to quantify the optical properties of aerosols, especially because of the uncertainties surrounding the role of aerosols in climate change. The main objective of the optical characterization of aerosols is to understand their properties. These properties are determined by the aerosols' chemical composition, size, shape …

Development Of A Heat Transfer Test Rig For Finding Heat Transfer Characteristics Of Liquid Methane, Sergio Flores

Open Access Theses & Dissertations

Most large scale rocket engines use a regeneratively cooled system to cool the rocket engine using either the rocket fuel or oxidizer. The use of liquid methane as a rocket fuel is an emerging technology proving to have several advantages over current rocket fuels. However, liquid methane is lacking the extensive research as a rocket fuel compared to highly used rocket fuels like liquid hydrogen. A heat transfer test rig was built with the goal to characterize the heat transfer characteristics of liquid methane as it passes through a heated channel. The development of the test rig underwent considerations designed …

Evaluation And Recommendation Of Mix Design For Emulsion Stabilized Bases, Samuel Franco

Open Access Theses & Dissertations

Asphalt emulsion has been used for base material stabilization in a few TxDOT districts. Results from these practices were quite different. The initial performance of two projects on US287 constructed around 2000 in the Amarillo District has been found to be satisfactory. However, the Yoakum District has reported problems with asphalt emulsion for base work in a project on FM 237. The preliminary conclusion from these trials has been that asphalt emulsion may not perform well in the high humidity/high rainfall areas like east Texas. On the other hand, using calcium-based additives to stabilize base courses in road construction has …

On Feasibility Of Reducing Metal Fuel Content And Operating Temperatures In Chemical Oxygen Generators, Allen Garcia

Open Access Theses & Dissertations

Chemical oxygen generators are widely used in aircraft, submarines, spacecraft, and other applications, problems such as combustion instabilities and a risk of fire may be present. For example, due to malfunction of an oxygen generator, fire occurred onboard the Mir Space Station in 1997. It is thus important to improve the process stability and fire safety of chemical oxygen generators. Chemical compositions for oxygen generators include an oxygen source such as sodium chlorate (NaClO3), a transition metal oxide as a catalyst, and a metal fuel to provide energy for self-sustaining combustion. Eliminating or decreasing the metal fuel would decrease the …

Fundamental Studies Of Co-Base Superalloy Biomedical Prototypes Fabricated By Electron Beam Melting: Microstructures And Microstructural Architecture, Sara M. Gaytan

Open Access Theses & Dissertations

Rapid prototyping, especially electron beam melting (EBM) technology by ARCAM have proven to provide outstanding microstructural and mechanical properties on different alloys fabricated by this technology. Being a computer designed driven technology, complex components, that are hard or even impossible to fabricate by traditional manufacturing techniques, can be fabricated by layer-by-layer EBM technology.

Microstructural and mechanical properties are compared for an EBM femoral knee component prototype with a traditionally-fabricated and body-removed femoral knee implant. Block and cylindrical shape components fabricated by EBM were also analyzed for this project. The alloy utilized for these components is Co-26Cr-6Mo-0.2C characterized by the standards …

Variation Of Number And Mass Concentration Of Particulate Matter At The International Bridge Of The Americas In El Paso, Texas, Veronica Guerrero

Open Access Theses & Dissertations

Particle mass and number concentration measurements during different seasonal periods were conducted to study the effects caused by both privately own vehicles (POV) and commercial operated vehicles at the International Bridge of the Americas (BOTA), El Paso, Texas. There were two monitoring sites: UTEP air quality mobile monitoring site at the El Paso Water Utility (EPWU) located at the Chamizal National Memorial Park (CNMP) near the bridge. At this location measurements of traffic counts, size distribution, particle number and mass concentration PM"₁₀" (EP"₁₀"; El Paso PM"₁₀") and PM"_2.5" (EP"_2.5"; El …

Study Of Probabilistic Approach For Structural Health Assessment Of Aerospace Structures, Jose Antonio Garcia

Open Access Theses & Dissertations

Current practical approaches used in structural health assessment programs of aerospace structures involve performing a fracture mechanics analysis to verify the safe life of structural components. The analysis typically makes several conservative assumptions implemented by NASA fracture control standard practices for critical structural components. This well-established paradigm for fracture control follows a deterministic approach and, in some cases, the calculations may produce overly conservative remaining life estimates.

This thesis describes the results of a study to approach the health assessment challenge of several critical components using probabilistic methods. The probabilistic analysis takes the current deterministic model and identifies variables that …

Investigation On Flame Characteristics Of Oxy-Fuel Combustion, Md R. Islam

Open Access Theses & Dissertations

Oxy-fuel combustion is currently being considered by the U.S Department of Energy as a promising technology for efficient carbon capture. This technology could substantially reduce NOx and CO2 emissions. In addition, the implementation of oxy-fuel combustion technology in a power generation system could potentially reduce negative environmental impacts of fossil fuel use. It also encourages the use of reliable and domestic energy sources. The U.S. Department of Energy has made efforts to investigate the performance of a CO2 and H2O diluted oxy-fuel combustion system in a high-pressure combustor. In an effort to better understand and characterize the fundamental flame characteristics …

Photocatalytic Destruction Of Halogenated Organic Compounds In Water With A New Photocatalyst, Mabruka Hadidan

Open Access Theses & Dissertations

In this research, a newly developed high surface area semiconductor porous material was synthesized from potassium titanium niobium mixed oxide (KTiNbO5) to be used as a photo catalyst in the presence of UV light to degrade halogenated organic compounds in water. The goal of the project was to investigate the catalytic activity of the material for its effectiveness in the degradation of the halogenated organic compounds, and it is the first investigation of this new photocatalyst with halogenated compounds. Model compounds dichloromethane, 1-chlorobutane, chlorobenzene, and trifluoroacetic acid in aqueous solutions were tested with the photocatalyst under ultraviolet light irradiation, using …

Fractal-Cosysmo Systems Engineering Cost Estimation For Complex Projects, Manish Shivram Khadtare

Open Access Theses & Dissertations

Cost estimation for engineering projects has advanced beyond the bottom-up counting of costs and the top-down use of analogies. Parametric cost estimation is now employed to estimate volatile software costs, as well as the cost of Systems Engineering (SE) effort in engineering projects. The Constructive Systems Engineering Cost Model (COSYSMO) estimates the number of Person-Months (PM) necessary to complete systems engineering projects by using project size and cost parameters. On re-examining the nature of systems engineering and the structures of complex projects that must be built in an orderly fashion on a variety of scales, it is apparent that a …

Ballistic Projectile Metallurgical Issues And Fundamentals: Aerosol Production In Rod Penetration Erosion And Erosion Phenomena Associated With Railgun Development, Brenda Ivette Machado

Open Access Theses & Dissertations

The issue is derived from ballistic erosion as it relates to nanoparticle production and respiration of these particles as a health concern ballistic erosion and ballistic erosion as it relates to railgun performance. A common thread between these two issues is dynamic recrystallization (DRX). DRX has been demonstrated to be the dominant mechanism for solid-state flow associated with ballistic projectile/target penetration and interaction, friction-stir welding phenomena, and other high-strain rate deformation phenomena.

Aerosol particulates collected on filters from ballistic penetration and erosion events for W-Ni-Co and W-Ni-Fe kinetic energy rod projectiles penetrating steel target plates were observed to be highly …

Determination Of Critical Parameters For Solar Probe Plus Shielding, Sergio Rafael Mendez

Open Access Theses & Dissertations

A methodology to determine critical design parameters such as critical "design" particle size, and critical "design" impact speed for the shielding of the Solar Probe Plus spacecraft was developed in this thesis. Several critical components and surfaces of the spacecraft such as the Solar Array North, the Thermal Protection System, and the ISIS Instruments were analyzed in this study. The methodology determines the critical "design" particle size based on the required reliability or probability of no impact. Current NASA methods do not provide means to calculate critical "design" impact speeds for missions such as Solar Probe Plus, where the distributions …

A Combined X-Fem And Level Set Approach For Modeling Composite Material's Micro Structure, Himanshu Kumar

Open Access Theses & Dissertations

Composite materials are usually made of fibers and binding matrix. It's always a challenge to model composite materials' microstructure through the traditional finite element method because construction of an approximation space which is discontinuous across a given line or surface will place strict restrictions on the FE mesh. The interfacing of fibers in composites' microstructure through the standard finite element method is irksome and tedious because the presence of fiber presents a discontinuity in the binding material. In this present work, the composite's microstructure is modeled through the combined approach of Level Set and Extended Finite Element Method. The fiber …

The Effect Of Mmod Porosity On Crater Depth After Hypervelocity Impact, David Ledesma

Open Access Theses & Dissertations

A significant amount of research has been conducted in the last decades on the design of spacecraft shielding for the impacts of Micro Meteoroid and Orbital Debris (MMOD). Through the use of hydrocodes, empirical data, and physical testing, researchers have been successful in studying a wide range of shielding configurations. However, a very limited amount of research has been conducted to understand the effect that the porosity and irregular shape of MMOD has on the damage they create on spacecraft components.

The work presented in this thesis addresses the modeling of MMDO porosity by using the CTH hydrocode to investigate …

Accelerated Simulation And Testing Of Integrated Circuits Using High Performance Computing Machines, Matthew C. Markulik

Open Access Theses & Dissertations

As Moore's Law continues to hold true and transistor density becomes exponentially larger the need to rely on computer aided design (CAD) simulators has become more relevant and necessary. As we dive into the age of electronic reliance there presents a need to constantly improve methods to reduce time-to-solution for developing technologies. The reliance on CAD simulators for electronic development leaves engineers with an ability to improve the design process by improving these simulators or improving the methods in which these simulators are being utilized. With the advancement of quality fabrication processes and the ability to operate at sub-threshold levels …

Mixed-Signal Distributed Feature Extraction For Classification Of Wide-Band Acoustic Signals On Sensor Networks, Humberto Santacruz

Open Access Theses & Dissertations

This thesis proposes a distributed/collaborative scheme for the classification of wide-band acoustic events within the context wireless sensor networks (WSNs). The proposed method is characterized by a mixed-signal processing scheme for the extraction of feature vectors which reduces the processing, memory allocation, and power requirements of the sensor nodes. The mixed-signal scheme assumes that nodes have an analog frontend consisting of a microphone, a bandpass filter, a squaring element and an integrator. This chain of components produces an estimate of the energy over the frequency subband extracted by the filter. The WSN has the ability to form a distributed filter …

Microstructural Architecture Developed In The Fabrication Of Solid And Open-Cellular Copper Components By Additive Manufacturing Using Electron Beam Melting, Diana Alejandra Ramirez

Open Access Theses & Dissertations

The fabrication of Cu components were first built by additive manufacturing using electron beam melting (EBM) from low-purity, atomized Cu powder containing a high density of Cu2O precipitates leading to a novel example of precipitate-dislocation architecture. These microstructures exhibit cell-like arrays (1-3µm) in the horizontal reference plane perpendicular to the build direction with columnar-like arrays extending from ~12 to >60 µm in length and corresponding spatial dimensions of 1-3 µm. These observations were observed by the use of optical metallography, and scanning and transmission electron microscopy. The hardness measurements were taken both on the atomized powder and the Cu components. …

Pressure-Dependent Nanoheteroepitaxy Of Cdte On Si(100) And Soi(100) Substrates Using The Close-Spaced Sublimation Technique, Hoong Yan See Tao

Open Access Theses & Dissertations

CdTe is an ideal II-VI semiconductor compound with a direct bandgap energy of 1.53 eV used in solar cells and infrared detector applications [8]. The National Renewable Energy Laboratory (NREL) reported that cadmium telluride (CdTe) thin films solar cells have achieved efficiency of 16.5% and with potential for improvement up to the theoretical value of 29% [14]. The close-spaced sublimation (CSS) method used for solar cell CdTe growth is being tested for selective CdTe nanoheteroepitaxial growth because the CSS method is cost efficient compared to the molecular beam epitaxy (MBE) and metalorganic vapor phase epitaxy (MOVPE) methods. High quality films …

Synthesis, Microstructure And Thermal Analysis Of Gd2o3 - Hfo2 Coatings, Chandan Kumar Roy

Open Access Theses & Dissertations

Thermal barrier coatings (TBCs) are critical for future gas turbines of advanced coal based power generation systems. The TBCs are protective layers of low thermal conductivity ceramic materials, which prevent the damage of components that are exposed to very high temperature of the hot gases. Due to increasing demand to improve the efficiency, it is necessary to find alternate TBC materials which can withstand higher temperature for longer period than state-of-art TBCs. The present study focuses on the Gd2O3 stabilized HfO2 (GSH) as a potential candidate for TBC. GSH materials were synthesized in bulk and coatings form. The Gd2O3 content …

An Evolutionary Approach Based On Viral Replication For Solving Combinatorial Optimization Problems, Claudia Evangelina Valles Sosa

Open Access Theses & Dissertations

A new multi-objective evolutionary algorithm that mimics the way viruses replicate is presented. The purpose of viral replication is to allow the reproduction and survival of its kind. The algorithm is able to produce a large number of solutions to be evaluated by imitating the way viral replication and the infection process work. The well-known multi-objective redundancy allocation problem is used to show the performance of this new viral-based evolutionary approach. The algorithm considers the maximization of system reliability, the minimization of system cost, and the minimization of system weight to be optimized simultaneously. The solution to the multi-objective optimization …

Effect Of Process Parameter On Temperature Distribution, Microstructure, And Mechanical Properties Of Self-Reacting Friction Stir Welded Aluminum Alloy 6061-T651, Monica Adriana Torres

Open Access Theses & Dissertations

Self-reacting friction stir welding is the latest FSW tool configuration developed, it employs two shoulders--one on top and one on the bottom of the workpiece-- this tool configuration offers many advantages over conventional welding techniques. However, the current lack of information and specifications limits its understanding and application. This investigation analyzed the effect of process parameters on temperature distribution, microstructure evolution, and final mechanical properties of 6061-T651 SR-FS welds. A factorial experiment was carried out, in which three-process parameters were analyzed--rotational speed, travel speed, and tool plunge force-- three levels were analyzed for each parameter, except for a tool plunge …

Fabrication And Characterization Of Nanocrystalline Yttrium Oxide Thin Films For Electronic Device Applications, Mudavakkat Vikas Haridas

Open Access Theses & Dissertations

This thesis presents the optimization of growth conditions for fabricating nanocrystalline Yttrium Oxide (Y2O3) thin films on silicon and optical grade, high quality quartz substrates in order to study its structural, optical and electrical properties for electronic device applications.

Commercially Y2O3 has proven to be difficult to fabricate at high quality due to its high temperature growth requirements and the need to alter established fabrication methods for electronic devices. A high temperature requirement for high quality poses a problem for research and analysis. This calls upon for an optimization of the growth conditions to facilitate fabrication of thin films for …

Methodology To Convert A Transportation Planning Origin-Destination Matrix Into A Microscopic Traffic Simulation Origin-Destination Matrix, Jose Osiris Vidana-Bencomo

Open Access Theses & Dissertations

Microscopic traffic simulation (MTS) is a cost-effective approach for the evaluation of traffic conditions in urban highways networks. In MTS models, traffic demand that is entered into the network is specified by one or several Origin-Destination (O-D) matrices. A major challenge in the application of MTS for large urban networks is the specification of the O-D matrices. This dissertation proposes a methodology that may be used to transform a O-D matrix from a transportation planning model (which is based on Traffic Analysis Zone, or TAZ, and is readily available) into a O-D matrix for a MTS model (which is traffic …

A Framework For Strategic Sustainable Supply Chain Design, Abril Paola Vazquez

Open Access Theses & Dissertations

Sustainable supply chain management has raised interest considerably in recent years; due to environmental concerns from society as well industries. There is a high interest in the industries to solve this problem but many of the frameworks are directed to specific situation or structure. A strategic sustainable supply chain design framework is presented with the purpose of providing many companies, including small and big industries, the means to maintain an eco-friendly operation. These include; industry plants, distribution centers, and retailers.

Indentifying And Understanding User Preferences In Generic Planning Tools, Grisel Ventura

Open Access Theses & Dissertations

Planning is an important cognitive work activity. To support this complex task, the development of planning tools is important to support people during decision-making and problem-solving tasks. Nowadays, a large number of manual and electronic tools support this complex activity; manual and electronic planning tools aid people in creating strategies for effective work performance. However, there is limited information on the design of generic planning tools people use for their activities, and why people choose to use the planning tool they do. Some examples of generic tools for planning are calendars, checklists, agendas, etc.

To answer this question, this research …

Analysis Of Indoor And Outdoor Particulate Matter At Various Residences In The El Paso Region, Joseph Christopher Pinon

Open Access Theses & Dissertations

This thesis is a presentation of particulate matter data collected from February 2007 to June 2008. Personal environment monitors (PEM), which measured 7-day PM2.5 concentrations, had been deployed at 14 homes during the 2007 year and deployed in 16 different homes during the 2008 sampling year. Within each sampling year, sampling occurred for two one-week (7-day) periods during each season. In addition to PEM sampling, a tapered element oscillating microbalance (TEOM) continuous sampler had been deployed in both indoors and outdoors at one pre-selected household per week. Gravimetric, chemical, and black carbon analysis had been performed on the PEM PM2.5 …

Experimental Investigation Of Magnesium/Regolith Combustion For In-Situ Production Of Materials On The Moon, Christopher White

Open Access Theses & Dissertations

Future settlements on the Moon will require that strong, cost-effective structural materials be developed in whole or in part from locally available resources. Such materials can be created in-situ from the lunar regolith using self-propagating high-temperature synthesis (SHS). By mixing the lunar regolith with metal additives, such as aluminum or magnesium, a combustible mixture is formed which, when ignited, can reach temperatures high enough to allow combustion to be self-sustaining, sintering the lunar regolith without further energy input and without the need for atmospheric oxygen. The resulting products may be strong enough for some structural applications, such as radiation shielding, …