Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Discipline
Keyword
Publication Year

Articles 181 - 210 of 1287

Full-Text Articles in Engineering

Comparison Of The Thermal Stability In Equal-Channel-Angular-Pressed And High-Pressure-Torsion-Processed Fe–21cr–5al Alloy, Maalavan Arivu, Andrew Hoffman, Jiaqi Duan, Jonathan Poplawsky, Xinchang Zhang, Frank W. Liou, Rinat Islamgaliev, Ruslan Valiev, Haiming Wen Jan 2023

Comparison Of The Thermal Stability In Equal-Channel-Angular-Pressed And High-Pressure-Torsion-Processed Fe–21cr–5al Alloy, Maalavan Arivu, Andrew Hoffman, Jiaqi Duan, Jonathan Poplawsky, Xinchang Zhang, Frank W. Liou, Rinat Islamgaliev, Ruslan Valiev, Haiming Wen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Nanostructured Steels Are Expected to Have Enhanced Irradiation Tolerance and Improved Strength. However, They Suffer from Poor Microstructural Stability at Elevated Temperatures. in This Study, Fe–21Cr–5Al–0.026C (Wt%) Kanthal D (KD) Alloy Belonging to a Class of (FeCrAl) Alloys Considered for Accident-Tolerant Fuel Cladding in Light-Water Reactors is Nanostructured using Two Severe Plastic Deformation Techniques of Equal-Channel Angular Pressing (ECAP) and High-Pressure Torsion (HPT), and their Thermal Stability between 500–700 °C is Studied and Compared. ECAP KD is Found to Be Thermally Stable Up to 500 °C, Whereas HPT KD is Unstable at 500 °C. Microstructural Characterization Reveals that ECAP KD …

Go to article

Static I-V Based Pim Evaluation For Spring And Fabric-Over-Foam Contacts, Kalkidan W. Anjajo, Yang Xu, Shengxuan Xia, Yuchu He, Haicheng Zhou, Hanfeng Wang, Jonghyun Park, Chulsoon Hwang Jan 2023

Static I-V Based Pim Evaluation For Spring And Fabric-Over-Foam Contacts, Kalkidan W. Anjajo, Yang Xu, Shengxuan Xia, Yuchu He, Haicheng Zhou, Hanfeng Wang, Jonghyun Park, Chulsoon Hwang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Spring Clips and Fabric-Over-Foams (FOFs) Are Widely Used in Mobile Devices for Electrical Connection Purposes. However, the Imperfect Metallic Connections Tend to Induce Passive Intermodulation (PIM), Resulting in a Receiver Sensitivity Degradation, Known as RP Desensitization. Due to the Complexity of the PIM Characterization, there is Not Yet a Way to Evaluate PIM Performance using a Simple Setup for Environments Like Factories. in This Paper, a Current-Voltage (I-V) Behavior-Based PIM Evaluation Method is Proposed and Validated with Various Metallic Contacts and Contact Forces. the Test Results Demonstrated the Feasibility of the PIM Performance Evaluation based on the Measured Static I-V …

Go to article

Correction: Modeling Phase Selection And Extended Solubility In Rapid Solidified Alloys (Metallurgical And Materials Transactions A, (2023), 10.1007/S11661-023-07221-7), Azeez Akinbo, Yijia Gu Jan 2023

Correction: Modeling Phase Selection And Extended Solubility In Rapid Solidified Alloys (Metallurgical And Materials Transactions A, (2023), 10.1007/S11661-023-07221-7), Azeez Akinbo, Yijia Gu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In the original online version of this article the reference citation in Fig. 3b was incorrect. The original article was corrected.

Go to article

Application Of A Variable Path Length Repetitive Process Control For Direct Energy Deposition Of Thin-Walled Structures, Elias B. Snider, Douglas A. Bristow Jan 2023

Application Of A Variable Path Length Repetitive Process Control For Direct Energy Deposition Of Thin-Walled Structures, Elias B. Snider, Douglas A. Bristow

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Direct Energy Deposition (DED) Additive Manufacturing is Well Suited to Fabricating Large Thin-Walled Metal Structures Such as Rocket Nozzles but Suffers from Layer-To-Layer Defect Propagation. Propagating Defects May Exhibit as Slumping or a Ripple in Bead Geometry. Recent Works Have Used Repetitive Process Control (RPC) Methods for Additive Manufacturing to Stabilize the Layer-Wise Defect Propagation, But These Methods Require Repetition of the Same Path. However, Typical Thin-Wall DED Applications, Sometimes Referred to as Vase Structures, Have Changing Paths with Each Layer Such as Expanding or Contracting Diameters and Changing Profiles. This Paper Presents an Extension to Optimal RPC that Uses …

Go to article

Reinforcement Learning-Guided Quadratically Constrained Quadratic Programming For Enhanced Convergence And Optimality, Chaoying Pei, Zhi Xu, Sixiong You, Jeffrey Sun, Ran Dai Jan 2023

Reinforcement Learning-Guided Quadratically Constrained Quadratic Programming For Enhanced Convergence And Optimality, Chaoying Pei, Zhi Xu, Sixiong You, Jeffrey Sun, Ran Dai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In the context of Quadratically Constrained Quadratic Programming (QCQP) with dynamic parameters, the effectiveness of various optimization approaches is heavily influenced by the quality of the initial guess. To address this challenge, this paper proposes a novel approach that leverages reinforcement learning (RL) to generate high-performing initial guesses for iterative algorithms, with the dynamic parameters serving as inputs. Our approach aims to accelerate convergence and improve the objective value, thereby enabling efficient and effective solutions to the QCQP problem under variability. In this study, we evaluate the proposed approach by applying it to an iterative algorithm, specifically the Iterative Rank …

Go to article

Mixed-Input Learning For Multi-Point Landing Guidance With Hazard Avoidance Part Ii: Learning-Based Guidance Algorithm, Sixiong You, Chaoying Pei, Vinay Kenny, Ran Dai, Jeremy R. Rea Jan 2023

Mixed-Input Learning For Multi-Point Landing Guidance With Hazard Avoidance Part Ii: Learning-Based Guidance Algorithm, Sixiong You, Chaoying Pei, Vinay Kenny, Ran Dai, Jeremy R. Rea

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper investigates the three-dimensional (3D) multi-point landing guidance (MLG) problem with hazard avoidance by developing a mixed-input learning-based method to achieve precise and fuel-efficient planetary landing in future Mars missions. Specifically, we aim to find a safe, fuel-efficient landing point and generate a fuel-optimal trajectory simultaneously in real-time. First, by introducing binary variables, the MLG problem is formulated as an optimal control problem with quadratic constraints. Then, by formulating the Hamiltonian function, the necessary conditions of optimality for the MLG problem are obtained, where the critical parameters are identified to represent the complete optimal solution. After that, to find …

Go to article

Feature-Based Learning For Optimal Abort Guidance, Vinay Kenny, Sixiong You, Godfrey Hendrix, Chaoying Pei, Roha Gul, Ran Dai, Jeremy R. Rea Jan 2023

Feature-Based Learning For Optimal Abort Guidance, Vinay Kenny, Sixiong You, Godfrey Hendrix, Chaoying Pei, Roha Gul, Ran Dai, Jeremy R. Rea

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The abort mission refers to the mission where the landing vehicle needs to terminate the landing mission when an anomaly happens and be safely guided to the desired orbit. This paper focuses on solving the time-optimal abort guidance (TOAG) problem in real-time via the feature-based learning method. First, according to the optimal control theory, the features are identified to represent the optimal solutions of TOAG using a few parameters. After that, a sufficiently large dataset of time-optimal abort trajectories is generated offline by solving the TOAG problems with different initial conditions. Then the features are extracted for all generated cases. …

Go to article

Distributed Optimization For Rank-Constrained Semidefinite Programs, Chaoying Pei, Sixiong You, Chuangchuang Sun, Ran Dai Jan 2023

Distributed Optimization For Rank-Constrained Semidefinite Programs, Chaoying Pei, Sixiong You, Chuangchuang Sun, Ran Dai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This letter develops a distributed optimization framework for solving the rank-constrained semidefinite programs (RCSPs). Since the rank constraint is non-convex and discontinuous, solving an optimization problem with rank constraints is NP-hard and notoriously time-consuming, especially for large-scale RCSPs. In the proposed approach, by decomposing an unknown matrix into a set of submatrices with much smaller sizes, the rank constraint on the original matrix is equivalently transformed into a set of constraints on the decomposed submatrices. The distributed framework allows parallel computation of subproblems while requiring coordination among them to satisfy the coupled constraints. As the scale of every subproblem solved …

Go to article

Orbital Stabilization Of Underactuated Systems Using Time Period Regulation, Nilay Kant, Ranjan Mukherjee Jan 2023

Orbital Stabilization Of Underactuated Systems Using Time Period Regulation, Nilay Kant, Ranjan Mukherjee

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A new approach to orbital stabilization of under-actuated systems with one passive degree-of-freedom (DOF) is presented. Virtual holonomic constraints are enforced using partial feedback linearization; this results in a dense set of periodic orbits on a constraint manifold. Every orbit on the constraint manifold is associated with a unique time-period. A desired orbit is selected, and the impulse controlled Poincaré map (ICPM) approach is utilized to stabilize the orbit by regulating the time-period. By treating the time period as the output, it is possible to design a dead-beat controller that achieves orbital stabilization in a single time-step. The effectiveness of …

Go to article

Experimental Study For Improving The Productivity Of Laser Foil Printing, Tunay Turk, Ming-Chuan Leu Jan 2023

Experimental Study For Improving The Productivity Of Laser Foil Printing, Tunay Turk, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This Study Aims to Improve the Productivity of Laser Foil Printing (LFP), Which is a Foil-Based Metal Additive Manufacturing (AM) Process. LFP Uses a Dual-Laser System to Fabricate a 3-Dimensional Part in a Layered Fashion by Performing Four Steps in Each Layer: Spot Welding, Pattern Welding, Contour Cutting, and Edge Polishing, All of Which Performed by Use of Lasers. We Experimentally Examined the Welding and Polishing Steps in This Study to Enhance LFP Productivity. the Jump Speed, Dwelling Duration, and Weld Path of Spot Welding and the Line Welding Speed and Wait Time between Weld Lines of Pattern Welding Are …

Go to article

Microstructure And Residual Stress In Functionally Graded 316l Stainless Steel/Inconel 625 Alloys Fabricated By Direct Energy Deposition, Xinchang Zhang, Liang Wang, Frank W. Liou, Yang Ren, Cheng Sun Jan 2023

Microstructure And Residual Stress In Functionally Graded 316l Stainless Steel/Inconel 625 Alloys Fabricated By Direct Energy Deposition, Xinchang Zhang, Liang Wang, Frank W. Liou, Yang Ren, Cheng Sun

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Functionally graded materials (FGMs) provide a unique solution to combine distinct properties within a single component to enhance its overall performance. Understanding the microstructure and residual stress distribution is particularly important as the material dissimilarity in FGMs can result in high residual stress that affects the mechanical integrity of structural components. This work aims to study the microstructure and residual stress of additively manufactured FGMs and the effects of isothermal annealing. In this study, 316L stainless steel/Inconel 625 FGMs were built by direct energy deposition and characterized by optical and electron microscopy as well as synchrotron-based X-ray diffraction. Our study …

Go to article

Nanobubble-Induced Aggregation Of Ultrafine Particles: A Molecular Dynamics Study, Eric Bird, Zhi Liang Jan 2023

Nanobubble-Induced Aggregation Of Ultrafine Particles: A Molecular Dynamics Study, Eric Bird, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Nanobubble-induced aggregation (NBIA) of fine and ultrafine particles in liquid is a promising method for enhancing floatation rates in mineral processing, cleaning contaminants from water, and reviving marine ecosystems. Although the current experimental techniques can measure the nanobubble capillary force between two surfaces with controlled approach speed, they are not capable of imaging NBIA dynamics of fine/ultrafine particles by real-time observation with nanoscale spatial resolution. In this work, we use molecular dynamics (MD) simulations to study dynamics of NBIA of Ag particles in a Lennard-Jones fluid system. The molecular-level modeling allows us to study microscopic details of NBIA dynamics that …

Go to article

Microstructure, Mechanical Properties And Oxidation Behavior Of Refractory Multi-Principal Element Alloys By Laser Remelting And Conventional Manufacturing, Visharad Jalan, Seth Crawford, Sung Heng Wu, Frank W. Liou, Haiming Wen Jan 2023

Microstructure, Mechanical Properties And Oxidation Behavior Of Refractory Multi-Principal Element Alloys By Laser Remelting And Conventional Manufacturing, Visharad Jalan, Seth Crawford, Sung Heng Wu, Frank W. Liou, Haiming Wen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Refractory Multi-Principal Element Alloys (RMPEAs), HfNbTaTiZr, (HfNbTaTiZr)9Cr, and (HfNbTaTiZr)9Al, Were Manufactured using Vacuum Arc Melting Followed by Laser Remelting to Mimic Additive Manufacturing. the Microhardness of the As-Cast HfNbTaTiZr, (HfNbTaTiZr)9Cr, and (HfNbTaTiZr)9Al Samples after Arc Melting Was Measured as 6.20, 7.63, and 6.89 Gpa, respectively. after Laser Remelting and Re-Solidification, the Hardness Increased by ~ 30% for Each Composition; the Hardest Was (HfNbTaTiZr)9Cr Measured at 9.60 GPa, While the Softest Was HfNbTaTiZr with a Hardness of 8.42 GPa, Which Was Still Harder Compared to All the Other Samples. the Addition …

Go to article

Natural 2d Layered Mineral Cannizzarite With Anisotropic Optical Responses, Arindam Dasgupta, Xiaodong Yang, Jie Gao Dec 2022

Natural 2d Layered Mineral Cannizzarite With Anisotropic Optical Responses, Arindam Dasgupta, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Cannizzarite is a naturally occurring mineral formed by van der Waals (vdW) stacking of alternating layers of PbS-like and Bi2S3-like two-dimensional (2D) materials. Although the PbS-type and Bi2S3-type 2D material layers are structurally isotropic individually, the forced commensuration between these two types of layers while forming the heterostructure of cannizzarite induces strong structural anisotropy. Here we demonstrate the mechanical exfoliation of natural cannizzarite mineral to obtain thin vdW heterostructures of PbS-type and Bi2S3-type atomic layers. The structural anisotropy induced anisotropic optical properties of thin cannizzarite flakes are explored through angle-resolved polarized Raman scattering, linear dichroism, and polarization-dependent anisotropic third-harmonic generation. …

Go to article

Enabling Ultrathick Electrodes Via A Microcasting Process For High Energy And Power Density Lithium-Ion Batteries, Tazdik Patwary Plateau, Hiep Pham, Yaqi Zhu, Ming-Chuan Leu, Jonghyun Park Oct 2022

Enabling Ultrathick Electrodes Via A Microcasting Process For High Energy And Power Density Lithium-Ion Batteries, Tazdik Patwary Plateau, Hiep Pham, Yaqi Zhu, Ming-Chuan Leu, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Thickening electrodes is one effective approach to increase active material content for higher energy and low-cost lithium-ion batteries, but limits in charge transport and huge mechanical stress generation result in poor performance and eventual cell failure. This paper reports a new electrode fabrication process, referred to as µ-casting, enabling ultrathick electrodes that address the trade-off between specific capacity and areal/volumetric capacity. The proposed µ-casting is based on a patterned blade, enabling facile fabrication of 3D electrode structures. The study reveals the governing properties of µ-casted ultrathick electrodes and how this simultaneously improves battery energy/power performance. The process facilitates a short …

Go to article

Additive Manufacturing Of Complexly Shaped Sic With High Density Via Extrusion-Based Technique – Effects Of Slurry Thixotropic Behavior And 3d Printing Parameters, Ruoyu Chen, Adam Bratten, Joshua Rittenhouse, Tian Huang, Wenbao Jia, Ming-Chuan Leu, Haiming Wen Oct 2022

Additive Manufacturing Of Complexly Shaped Sic With High Density Via Extrusion-Based Technique – Effects Of Slurry Thixotropic Behavior And 3d Printing Parameters, Ruoyu Chen, Adam Bratten, Joshua Rittenhouse, Tian Huang, Wenbao Jia, Ming-Chuan Leu, Haiming Wen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Additive manufacturing of dense SiC parts was achieved via an extrusion-based process followed by electrical-field assisted pressure-less sintering. The aim of this research was to study the effect of the rheological behavior of SiC slurry on the printing process and quality, as well as the influence of 3D printing parameters on the dimensions of the extruded filament, which are directly related to the printing precision and quality. Different solid contents and dispersant- Darvan 821A concentrations were studied to optimize the viscosity, thixotropy and sedimentation rate of the slurry. The optimal slurry was composed of 77.5 wt% SiC, Y2O3 and Al2O3 …

Go to article

Predicting Defects In Laser Powder Bed Fusion Using In-Situ Thermal Imaging Data And Machine Learning, Sina Malakpour Estalaki, Cody S. Lough, Robert G. Landers, Edward C. Kinzel, Tengfei Luo Oct 2022

Predicting Defects In Laser Powder Bed Fusion Using In-Situ Thermal Imaging Data And Machine Learning, Sina Malakpour Estalaki, Cody S. Lough, Robert G. Landers, Edward C. Kinzel, Tengfei Luo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Variation in the local thermal history during the Laser Powder Bed Fusion (LPBF) process in Additive Manufacturing (AM) can cause micropore defects, which add to the uncertainty of the mechanical properties (e.g., fatigue life, tensile strength) of the built materials. In-situ sensing has been proposed for monitoring the AM process to minimize defects, but successful minimization requires establishing a quantitative relationship between the sensing data and the porosity, which is particularly challenging with a large number of variables (e.g., laser speed, power, scan path, powder property). Physics-based modeling can simulate such an in-situ sensing-porosity relationship, but it is computationally costly. …

Go to article

Machine Learning In Aerodynamic Shape Optimization, Jichao Li, Xiaosong Du, Joaquim R.R.A. Martins Oct 2022

Machine Learning In Aerodynamic Shape Optimization, Jichao Li, Xiaosong Du, Joaquim R.R.A. Martins

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Machine learning (ML) has been increasingly used to aid aerodynamic shape optimization (ASO), thanks to the availability of aerodynamic data and continued developments in deep learning. We review the applications of ML in ASO to date and provide a perspective on the state-of-the-art and future directions. We first introduce conventional ASO and current challenges. Next, we introduce ML fundamentals and detail ML algorithms that have been successful in ASO. Then, we review ML applications to ASO addressing three aspects: compact geometric design space, fast aerodynamic analysis, and efficient optimization architecture. In addition to providing a comprehensive summary of the research, …

Go to article

Laser Ablation Of Cfrp Surfaces For Improving The Strength Of Bonded Scarf Composite Joints, Jassem Alyousef, Arief Yudhanto, Ran Tao, Gilles Lubineau Sep 2022

Laser Ablation Of Cfrp Surfaces For Improving The Strength Of Bonded Scarf Composite Joints, Jassem Alyousef, Arief Yudhanto, Ran Tao, Gilles Lubineau

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Repairing damaged composite parts using scarf technique requires a careful selection of treatment methods for composite surface. Laser treatment is one of the emerging techniques to treat the milled composite surface by unlocking various levels of morphological changes and, thus, optimizing joint strength. However, laser parameters, e.g., energy density (fluence), should be carefully determined to ensure the acceptable structural recovery. Here, the influence of CO2 laser with relatively high fluence (ablation effect) on the surface characteristics (roughness, morphology, wettability) and scarf joint strength with associated failure modes of unidirectional (UD) and quasi-isotropic (QI) carbon fiber-reinforced plastic (CFRP) laminates is studied. …

Go to article

Effects Of Radiation Reabsorption On The Laminar Flame Speed And No Emission During Aviation Kerosene Combustion At Elevated Pressures, Shu Zheng, Hao Liu, Qing Li, Jiajian Zhu, Mingbo Sun, Bo Zhou, Ran Sui, Qiang Lu Sep 2022

Effects Of Radiation Reabsorption On The Laminar Flame Speed And No Emission During Aviation Kerosene Combustion At Elevated Pressures, Shu Zheng, Hao Liu, Qing Li, Jiajian Zhu, Mingbo Sun, Bo Zhou, Ran Sui, Qiang Lu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Increasing attention has been paid on combustion stability and pollution emission of aviation kerosene due to the emerging interests on supersonic combustion scramjets. Whereas the vitiation component H2O introduced by hydrogen-fueled heaters in high-enthalpy vitiated air during ground experiments has a considerable influence on kerosene combustion, especially through its radiation effect, which needs to be further investigated. In this paper, the radiation reabsorption effects on laminar flame speeds and NO emissions during RP-3/H2O/O2/N2 combustion was assessed numerically over a wide range of equivalence ratio and pressure (ϕ = 0.7–1.4 and P = 1–15 atm) using detailed chemical and radiation models. …

Go to article

Metallization Of Polymers And Composites: State-Of-The-Art Approaches, Ruslan Melentiev, Arief Yudhanto, Ran Tao, Todor Vuchkov, Gilles Lubineau Sep 2022

Metallization Of Polymers And Composites: State-Of-The-Art Approaches, Ruslan Melentiev, Arief Yudhanto, Ran Tao, Todor Vuchkov, Gilles Lubineau

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Polymers and their composites are widely used for designing structures in aerospace, automotive, electronic, sport industries due to their lightweight, cost, and processing advantages. However, the surface of polymeric materials typically exhibits intrinsic deficiencies, limiting their durability and functionalities, e.g., low wear resistance, low thermal and electrical conductivity, low adhesion, low bioactivity, low reflectiveness, and weak photochemical resistance. Polymer metallization is an emerging concept that addresses these deficiencies by forming a metallic skin on polymeric surfaces. Herein, the working principles, recent advances, challenges, functional capabilities, and applications of the state-of-the-art polymer metallization methods in the fields of additive manufacturing, coating …

Go to article

Improved Additive Manufacturing Of Silicon Carbide Parts Via Pressureless Electric Field-Assisted Sintering, Adam Bratten, Ruoyu Chen, Joshua Rittenhouse, Ming-Chuan Leu, Haiming Wen Sep 2022

Improved Additive Manufacturing Of Silicon Carbide Parts Via Pressureless Electric Field-Assisted Sintering, Adam Bratten, Ruoyu Chen, Joshua Rittenhouse, Ming-Chuan Leu, Haiming Wen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

High solids loading silicon carbide (SiC)-based aqueous slurries containing only.5 wt. % organic additives were utilized to create specimens of various geometries via an extrusion-based additive manufacturing (AM) technique. Pressure less electric field-assisted sintering was performed to densify each specimen without deformation. The combination of these techniques produced parts with >98% relative density despite containing only 5 wt.% oxide sintering additives. After sintering, specimens contained only the α-SiC and yttrium aluminum perovskite phases. This suggests the evolution of a nonequilibrium yttrium aluminate phase, as well as transformation from β-SiC to α-SiC. The fabrication method presented in this work has advantages …

Go to article

In-Situ Measurements Of Temperature And Emissivity During Msw Combustion Using Spectral Analysis And Multispectral Imaging Processing, Shu Zheng, Weiguang Cai, Ran Sui, Zixue Luo, Qiang Lu Sep 2022

In-Situ Measurements Of Temperature And Emissivity During Msw Combustion Using Spectral Analysis And Multispectral Imaging Processing, Shu Zheng, Weiguang Cai, Ran Sui, Zixue Luo, Qiang Lu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

By using a novel multispectral imaging technology, the 2-D distributions of flame temperature and emissivity were measured in a 16 MW incinerator to co-fire municipal solid waste (MSW) and municipal sludge. A way to establish the relationship between the multispectral flame images and the temperature was proposed by combing the Newton iteration method and Hottel emissivity model. The results showed that the measured temperatures at different locations varied by 31.25% with a fixed steam evaporation rate, and 11.76% with different steam evaporation rates at a given port. The temperatures and emissivities decreased at upper locations due to the lower local …

Go to article

A Comparative Study On Representativeness And Stochastic Efficacy Of Miniature Tensile Specimen Testing, Sreekar Karnati, Sriram Praneeth Isanaka, Yunlu Zhang, Frank W. Liou, Jason L. Schulthess Jul 2022

A Comparative Study On Representativeness And Stochastic Efficacy Of Miniature Tensile Specimen Testing, Sreekar Karnati, Sriram Praneeth Isanaka, Yunlu Zhang, Frank W. Liou, Jason L. Schulthess

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this article, a miniature dog bone tensile coupon design was tested against the existing ASTM standard specimen design. Specimens were prepared from commercially sourced austenitic stainless steel 304 alloy, and a defect-ridden additively manufactured 304L alloy was studied. By utilizing a tensile specimen design that is 1/230th volume of the smallest ASTM E8-04 (2016), Standard Test Methods for Tension Testing of Metallic Materials, dog bone specimen, coupled to a digital image correlation (DIC) setup, case studies were performed to compare tensile property measurements and strain field evolution. Whereas yield strength measurements were observed to be similar, post-yield, the ultimate …

Go to article

In-Situ Infrared Thermographic Inspection For Local Powder Layer Thickness Measurement In Laser Powder Bed Fusion, Tao Liu, Cody S. Lough, Hossein Sehhat, Yi Ming Ren, Panagiotis D. Christofides, Edward C. Kinzel, Ming-Chuan Leu Jul 2022

In-Situ Infrared Thermographic Inspection For Local Powder Layer Thickness Measurement In Laser Powder Bed Fusion, Tao Liu, Cody S. Lough, Hossein Sehhat, Yi Ming Ren, Panagiotis D. Christofides, Edward C. Kinzel, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The laser powder bed fusion (LPBF) process is strongly influenced by the characteristics of the powder layer, including its thickness and thermal transport properties. This paper investigates in-situ characterization of the powder layer using thermographic inspection. A thermal camera monitors the temperature history of the powder surface immediately after a layer of new powder is deposited by the recoating system. During this process, thermal energy diffuses from the underlying solid part, eventually raising the temperature of the above powder layer. Guided by 1D modeling of this heat-up process, experiments show how the parameterized thermal history can be correlated with powder …

Go to article

Internal Energy Balance And Aerodynamic Heating Predictions For Hypersonic Turbulent Boundary Layers, Matthew Barone, Gary L. Nicholson, Lian Duan Jul 2022

Internal Energy Balance And Aerodynamic Heating Predictions For Hypersonic Turbulent Boundary Layers, Matthew Barone, Gary L. Nicholson, Lian Duan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The elemental equation governing heat transfer in aerodynamic flows is the internal energy equation. For a boundary layer flow, a double integration of the Reynolds-averaged form of this equation provides an expression of the wall heat flux in terms of the integrated effects, over the boundary layer, of various physical processes: turbulent dissipation, mean dissipation, turbulent heat flux, etc. Recently available direct numerical simulation data for a Mach 11 cold-wall turbulent boundary layer allows a comparison of the exact contributions of these terms in the energy equation to the wall heat flux with their counterparts modeled in the Reynolds-averaged Navier-Stokes …

Go to article

Anisotropic Third-Harmonic Generation Of Exfoliated As2s3 Thin Flakes, Ravi P.N. Tripathi, Xiaodong Yang, Jie Gao Jun 2022

Anisotropic Third-Harmonic Generation Of Exfoliated As2s3 Thin Flakes, Ravi P.N. Tripathi, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Van der Waals (vdW) materials have recently attracted significant interest in the context of orientation-dependent linear and nonlinear optical properties. Recently, arsenic trisulfide (As2S3) or orpiment is identified as a new vdW layered material having anisotropic vibrational and optomechanical responses due to the reduced in-plane crystal symmetry, but its nonlinear optical response is still not well understood yet. Herein, the anisotropic third-harmonic generation (THG) response of mechanically exfoliated As2S3 thin flakes is reported. The polarization-dependent evolution of THG emission from butterfly-shaped pattern to four-lobe pattern is comprehensively explored. Moreover, the third-order nonlinear susceptibility of As2S3 crystal is extracted by analyzing …

Go to article

Natural Layered Mercury Antimony Sulfosalt Livingstonite With Anisotropic Optical Properties, Ravi P.N. Tripathi, Jie Gao, Xiaodong Yang May 2022

Natural Layered Mercury Antimony Sulfosalt Livingstonite With Anisotropic Optical Properties, Ravi P.N. Tripathi, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Naturally occurring layered mineral livingstonite is identified as a new type of van der Waals (vdW) heterostructure based 2D material, consisting of two commensurately modulated alternating layers of HgSb2S4 and Sb2S4. The heterostructures of livingstonite crystal are prepared as thin flakes via mechanical exfoliation method. The prepared livingstonite crystals are further investigated in the context of vibrational, linear, and nonlinear optical properties, including anisotropic Raman scattering, wavelength-dependent linear dichroism (LD) transition effect, birefringence, and anisotropic third-harmonic generation (THG). Owing to the monoclinic crystal structure, livingstonite crystals exhibit strong anisotropic vibrational and optical responses. In contrast to conventional vdW heterostructures, the …

Go to article

Dual-Band Selective Circular Dichroism In Mid-Infrared Chiral Metasurfaces, Haotian Tang, Daniel Rosenmann, David A. Czaplewski, Xiaodong Yang, Jie Gao May 2022

Dual-Band Selective Circular Dichroism In Mid-Infrared Chiral Metasurfaces, Haotian Tang, Daniel Rosenmann, David A. Czaplewski, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Most chiral metamaterials and meta surfaces are designed to operate in a single wavelength band and with a certain circular dichroism (CD) value. Here, mid-infrared chiral meta surface absorbers with selective CD in dual-wavelength bands are designed and demonstrated. The dual-band CD selectivity and tunability in the chiral meta surface absorbers are enabled by the unique design of a unit cell with two coupled rectangular bars. It is shown that the sign of CD in each wavelength band can be independently controlled and flipped by simply adjusting the geometric parameters, the width and the length, of the vertical rectangular bars. …

Go to article

Updates And Improvements To The Satellite Drag Coefficient Response Surface Modeling Toolkit, Phillip Logan Sheridan, Smriti Nandan Paul, Guillermo Avendaño-Franco, Piyush M. Mehta May 2022

Updates And Improvements To The Satellite Drag Coefficient Response Surface Modeling Toolkit, Phillip Logan Sheridan, Smriti Nandan Paul, Guillermo Avendaño-Franco, Piyush M. Mehta

Mechanical and Aerospace Engineering Faculty Research & Creative Works

For satellites in the Low Earth Orbit (LEO) region, the drag coefficient is a primary source of uncertainty for orbit determination and prediction. Researchers at the Los Alamos National Laboratory (LANL) have created the so-called Response Surface Modeling (RSM) toolkit to provide the community with a resource for simulating and modeling satellite drag coefficients for satellites with complex geometries (modeled using triangulated facets) in the free molecular flow (FMF) regime. The toolkit fits an interpolation surface using non-parametric Gaussian Process Regression (GPR) over drag coefficient data computed using the numerical Test Particle Monte Carlo (TPMC) method. The fitted response surface …

Go to article

First Prev Next Last