Engineering Commons^™

Two-Phase Flow In High Aspect Ratio, Polymer Microchannels For Reagent Delivery Applications, Estelle Evans

LSU Master's Theses

Multiphase flow in microfluidics is an increasingly growing field, especially in biotechnology. For instance, a steady-state slug flow would benefit lab-on-a-chip drug delivery methods. This flow would not only use minute amounts of reagents, but it would also decrease the sample processing time. Thus, researching a steady-state plug flow in a microchannel is beneficial to the drug delivery field. Five PMMA, directly-milled microchannels [2: Aspect Ratio 1 (with and without pressure ports, 2): Aspect ratio 2 (with and without pressure ports), and 1: Aspect Ratio 3 (without pressure ports)] were manufactured. These channels were then cleaned, and a PMMA cover …

Performance Of Torus-Type Brushless Dc Motor With Winding Connected In Two And Three-Phase System, Dinakar Choppa

LSU Master's Theses

A torus-type permanent magnet brushless DC motor is the object of this thesis. The motor can operate with the winding connected either in two - phase or three - phase system. A comparative study of performance of the motor operating in these two systems is the objective of the thesis. To analyze the motor performance, the dynamic models of the motors operating with two - phase and three - phase motors have been proposed. The simulation of motor operation was carried out using the MATLAB/SIMULINK software package. A study of motors operation in steady state conditions has been done by …

Comparative Study Of Axial Flux Permanent Magnet Brushless Dc Motor Operating With The Winding Connected In Single-Phase And Two-Phase System, Sunil Kumar Challa

LSU Master's Theses

The object of the study is a double-sided axial flux permanent magnet brushless dc (AFPM BLDC) motor with salient pole stator. Its winding can be connected either in single-phase or in two-phase system, which results in different operation of the motor.

The objective of the thesis is to analyze and compare the performances of the AFPM BLDC motor with single-phase winding and two-phase winding. To study the motor operation, a mathematical dynamic model has been proposed for each of the motor with different winding, which became the basis for simulations that were performed using MATLAB/SIMULINK software package.

The calculations were …

Influence Of Circadian Rhythm On The Physical And Mental Performance, Maryam Muhammed Amin

LSU Master's Theses

This thesis studied the temperature circadian rhythm and its relationship with the physical and mental performance of the individuals. The objectives of this study were to determine (1) the effect of temperature circadian rhythm on the mental and physical performance, (2) whether a common oral temperature circadian rhythm pattern exists for all the participants, (3) the times of the day when the participants perform their best and worst in comparison to their highest and lowest temperatures respectively, (4) find out whether the effect of the oral temperature circadian rhythm on the physical and mental performance is different in males and …

Information Analysis Of Dna Sequences, Riyazuddin Mohammed

LSU Master's Theses

The problem of differentiating the informational content of coding (exons) and non-coding (introns) regions of a DNA sequence is one of the central problems of genomics. The introns are estimated to be nearly 95% of the DNA and since they do not seem to participate in the process of transcription of amino-acids, they have been termed “junk DNA.” Although it is believed that the non-coding regions in genomes have no role in cell growth and evolution, demonstration that these regions carry useful information would tend to falsify this belief. In this thesis, we consider entropy as a measure of information …

Communication Blades: Modular Communications For Tangible And Embedded Interfaces, Karun Kumar Kallakuri

LSU Master's Theses

Bladed Tiles is a modular hardware toolkit for building tangible and embedded interface devices. It includes “function blades” and “interaction tiles,” which can provide a flexible, inexpensive, open-ended platform for constructing a wide variety of tangible and embedded interfaces. In this paper, we propose Communication Blades. These are a class of electronic modules with varied computational capabilities for interfacing devices built using bladed tiles toolkit and also for interfacing embedded devices as adapters with external communication networks. These blades provide flexibility by offering the ability to select between different communication technologies and connectivity by providing devices with interoperability over different …

Simulations Of A Modified Micro-Scale Electrophoretron, Nada Elmajdoub

LSU Master's Theses

This paper presents theoretical analysis and numerical simulations of a modified micro-scale electrophoretron adapted for cycling reaction applications (PCR, LDR...). The electrophoretron consists of a closed-loop microchannel. If one part of the length of the channel has an electroosmotic mobility of an opposite sign than the remaining part, a continuous cyclic motion of the fluid can be sustained if a potential difference is applied on two electrodes strategically placed along the channel. Conservation of mass leads to the formation of a pressure gradient and a related hydrodynamic flow. Under appropriate combination of design parameters, the combined Electroosmotic -hydrodynamic flow contributes …

Instantaneously Trained Neural Networks With Complex And Quaternion Inputs, Adityan V. Rishiyur

LSU Master's Theses

Neural network architectures such as backpropagation networks, perceptrons or generalized Hopfield networks can handle complex inputs but they require a large amount of time and resources for the training process. This thesis investigates instantaneously trained feedforward neural networks that can handle complex and quaternion inputs. The performance of the basic algorithm has been analyzed and shown how it provides a plausible model of human perception and understanding of images. The motivation for studying quaternion inputs is their use in representing spatial rotations that find applications in computer graphics, robotics, global navigation, computer vision and the spatial orientation of instruments. The …

Enhanced Degradation Of Phenanthrene And Benzo(A)Pyrene In A Field-Contaminated Sediment Inhabited By Ilyodrilus Templetoni: A Microcosm Study, Marilou Montevirgen Nabatilan

LSU Master's Theses

The influence of the oligochaete Ilyodrilus templetoni on the degradation of phenanthrene and benzo(a)pyrene present in a field-contaminated sediment was studied in microcosm experiments. Results indicate an enhanced degradation of phenanthrene and benzo(a)pyrene in microcosms inhabited by I. templetoni. Total phenanthrene reduction was observed at an average of 9.78 % in worm microcosms, while no reduction was observed in the control microcosms. Benzo(a)pyrene reduction, on the other hand, was determined at 78.60 % and 30.04 % in worm and control microcosms, respectively. The lowest concentrations of these PAHs at the end of 97-day study were observed well below the surface …

A Configurable Decoder For Pin-Limited Applications, Matthew Collin Jordan

LSU Master's Theses

Pin limitation is the restriction imposed on an IC chip by the unavailability of a sufficient number of I/O pins. This impacts the design and performance of the chip, as the amount of information that can be passed through the boundary of the chip becomes limited. One area that would benefit from a reduction of the effect of pin limitation is reconfigurable architectures. In this work, we consider reconfigurable devices called Field Programmable Gate Arrays (FPGAs). Due to pin limitation, current FPGAs use a form of 1-hot decoder to select elements (one frame at a time) during partial reconfiguration. This …

A Novel Robust Mel-Energy Based Voice Activity Detector For Nonstationary Noise And Its Application For Speech Waveform Compression, Syed, Q. Waheeduddin

LSU Master's Theses

The voice activity detection (VAD) is crucial in all kinds of speech applications. However, almost all existing VAD algorithms suffer from the nonstationarity of both speech and noise. To combat this difficulty, we propose a new voice activity detector, which is based on the Mel-energy features and an adaptive threshold related to the signal-to-noise ratio (SNR) estimates. In this thesis, we first justify the robustness of the Bayes classifier using the Mel-energy features over that using the Fourier spectral features in various noise environments. Then, we design an algorithm using the dynamic Mel-energy estimator and the adaptive threshold which depends …

Designing Switches For Routing In Circuit-Switched Trees, Dinesh Prasad Venkat Rao

LSU Master's Theses

Reconfigurable computing provides a fast and flexible solution for intensive computing processes. Thus, it acts as a bridge between software controlled and hardware based processors. The self–reconfigurable gate array (SRGA) is a reconfigurable architecture that allows fast switching between operations on a reconfigurable device. It consists of a 2-dimensional array of processing elements (PEs) connected using a binary tree structure, called a circuit-switched tree (CST). A CST is a balanced binary tree in which leaves represent processing elements (PE) and internal nodes represent switches. The PEs in the CST communicates with each other by configuring the appropriate switches in the …

A Methanol And Hydrogen Peroxide Fuel Cell Using Non-Noble Catalysts In Alkaline Solution, Woosuk Sung

LSU Master's Theses

A primary goal of this work is to develop a novel liquid-based microscale fuel cell using non-noble metal catalysts. The developed fuel cell is based on a membraneless structure. The operational complications of a proton exchange membrane lead the development of a fuel cell with the membraneless structure. Non-noble metals with relatively mild catalytic activity, nickel hydroxide and silver oxide, were employed as anode and cathode catalysts to minimize the effect of cross reactions with the membraneless structure. Along with nickel hydroxide and silver oxide, methanol and hydrogen peroxide were selected as a fuel at the anode and an oxidant …

Refurbishment Of Louisiana State University Calibration Chamber, Ardita Dushi

LSU Master's Theses

This thesis focuses on the refurbishment of Louisiana State University calibration chamber. The testing equipments were checked and connected together to complete the calibration chamber system. The data acquisition system was upgraded to National Instruments (NI) SCXI system. Therefore, a compatible computer program language in LabVIEW was developed. LabVIEW is a programming language developed by NI that reads the data from the instruments, displays the data in graphical form, calculates the desired parameters, commands the transducer to apply the required pressure to the specimen, and saves the data at the desired frequency. The Anisotropic Modified Cam Clay Model (AMCCM) following …

Effect Of Overhead Drilling Support On Muscular Activity Of Shoulder, Bharat Kumar Bhogaraju Bhallam Venkata

LSU Master's Theses

This study examines the effect of an overhead drilling support and position of the arm on muscular activity of the shoulder. Five male participants simulated an overhead drilling task by using a drill in near, middle and far reach positions. Electromyographic measurements were taken from the dominant side anterior deltoid, bicep and trapezius muscles. Root mean square amplitude (RMS) of the EMG activity from these muscles was used to determine the load on the muscular system. The participants used a subjective rating scale to evaluate the overhead support stand and holding position. The results demonstrate that the overhead support stand …

Balancing Mixed-Model Assembly Line To Reduce Work Overload In A Multi-Level Production System, Pravin Y. Tambe

LSU Master's Theses

Generating the optimal production schedule for an assembly line, which will balance the workload at all the production stages, is a difficult task considering a variety of practical constraints. Varying customer demand is an important factor to be considered when designing an assembly line. In order to respond to varying customer demand, many companies are attempting to make their production system more flexible/agile or adaptable to change. Due to the volatile nature of market, companies cannot afford to manufacture same type of product for long period of time and neither can maintain high inventory level; to tackle this problem we …

Improved Content Based Watermarking For Images, Arvind Kumar Parthasarathy

LSU Master's Theses

Due to improvements in imaging technologies and the ease with which digital content can be created and manipulated, there is need for the copyright protection of digital content. It is also essential to have techniques for authentication of the content as well as the owner. To this end, this thesis proposes a robust and transparent scheme of watermarking that exploits the human visual systems’ sensitivity to frequency, along with local image characteristics obtained from the spatial domain, improving upon the content based image watermarking scheme of Kay and Izquierdo. We implement changes in this algorithm without much distortion to the …

Overview Of Cogeneration At Lsu, Robert,Jr. Buckley

LSU Master's Theses

Cogeneration (or Combined Heat and Power) continues to gain importance in power production because of its high efficiency, environmental friendliness, and flexibility. Louisiana State University (LSU) recently began operation of a new 20 MW cogeneration system. This new facility can serve as a useful learning tool for chemical and mechanical engineering students throughout their education at LSU. The goal of this project is to develop educational modules utilizing the cogeneration system which have industrial significance. Educational modules will include: a comparison of ideal gas versus real gas thermodynamics for a cogeneration optimization problem, a cogeneration data reconciliation problem, and a …

Modeling Fabrication And Characterization Of A Bio-Micro Thermoelectric Device For Highly Localized Temperature Control, Aparna Prabhakar

LSU Master's Theses

There is an ever expanding interaction between the fields of micro-electromechanical systems (MEMS) and biology to develop devices to monitor, control and act on living systems. Particularly in the field of cryobiology, there is a need to monitor and control temperature at the cellular level. An important step towards achieving this aim is to fabricate an array of microscale thermoelectric actuators. As a first step for towards achieving such localized control of temperatures in cells and tissues, an array of individually addressable micro-thermoelectric coolers (µTECs) were modeled, characterized, and fabricated. Prefabrication experimentation and modeling were carried out to understand the …

Modeling Of Fiber Reinforced Polymer Confined Concrete Cylinders, Indrani V. Volety

LSU Master's Theses

Fiber Reinforced Polymer (FRP) confined concrete columns have been developed for new construction and rebuilding of concrete piers/piles in engineering structures. Design of these FRP confined concrete columns requires an accurate estimate of the performance enhancement due to the confinement mechanism. Therefore, the key is to develop a confinement model, a model that relates the confined concrete strength with the unconfined concrete strength and the confining pressure provided by the FRP. Due to its closed-form expression and ease of application, design-oriented confinement models predominate in designing FRP confined concrete columns. Design oriented models are directly based on the interpretation of …

Molecular Dynamics Simulation Study Of Grain Boundary Migration In Nanocrystalline Pd, Shengyu Wang

LSU Master's Theses

We present a new methodology for measuring the grain boundary mobility for curved boundaries using molecular-dynamics simulation of grain growth in a small, specifically tailored Pd nanocrystalline structure. In the model system, the boundaries move under the forces provided by their curvature and in the presence of the triple junctions. As a consequence of grain boundary migration the boundary area per unit volume is reduced and the mean grain size of grains increases with time. Our investigation shows that at elevated temperatures the activation energy for grain growth in this specifically tailored microstructure is very close to that of grain …

Development And Application Of Methods For Evaluation Of Hurricane Shelters, James P. Gregg

LSU Master's Theses

With the population of hurricane prone regions increasing, it has become more difficult to evacuate entire communities, increasing the need for hurricane shelters in coastal areas. Community officials generally use American Red Cross Standard ARC 4496 to evaluate the suitability of buildings for use as shelters.. ARC 4496 uses a least-risk process that evaluates many building and site characteristics. However, it does not address characteristics of the approaching storm and does not provide insight to the expected hazards and performance of the facility under different hurricane conditions. A new method for evaluating facilities for use as hurricane shelters is proposed. …

Effect Of Speed Limit Increase On Crash Rate On Rural Two-Lane Highways In Louisiana, Athira Swarna Jayadevan

LSU Master's Theses

Though the rural two lane roads are the low volume-less traveled roads, the majority of the crashes occur on these roads and the high speed of motor vehicles on these roads is suspected to be one of the main causes for this. This study focused on the development of a methodology to study the impact of a speed limit increase on the crash rate on the rural two lane roads in Louisiana. The Louisiana crash database obtained from the Louisiana Department of Transportation (LADOTD) was used to carry out the analysis. The analysis consisted of the comparison of crash rates …

A New Method To Determine Radiative Properties Of Rough Solid Surfaces, Raghu Nandan Mutukulla

LSU Master's Theses

The radiative properties of the rough surfaces are important both from fundamental and practical standpoint. Thus, there is a need to determine the effect of roughness on radiative properties of materials accurately, as these properties effect the performance of electronic devices, communication devices, optical sensors, and furnaces, amongst others. The effects of roughness are assessed by measuring the reflection coefficients from the carbon rod surfaces and steel 1086 samples over the range of angles 25 to 75 in the visible range and near infrared region. Different levels of roughness are induced on the surfaces by utilizing different grid size sand-paper …

Heat Transfer And Flow Characteristics Inside A Gas Turbine Combustor, Yap-Sheng Goh

LSU Master's Theses

Heat transfer and flow characteristics inside a typical can-annulus gas turbine combustor are investigated. This is the first study in a public domain to focus on the convective heat loads to combustor liner due to swirling flow generated by swirler nozzles. The objectives of this study are to physically design an experimental combustor test model, to perform local accurate heat transfer and flow measurements, and to better understand the fundamental thermo-fluid dynamic effects inside a combustor equipped with a swirler nozzle provided by Solar Turbines Inc. The local temperature and heat transfer distribution were determined to locate the heat transfer …

Design Of Linear Boolean Network Codes For Combination Networks, Shoupei Li

LSU Master's Theses

Network coding is a promising technique to improve the throughput of communication networks. In the thesis, we investigate linear Boolean network codes on a special class of multicast networks, called combination networks. Using companion matrices of primitive polynomials over finite fields, we design a class of symmetric linear Boolean network codes from Reed-Solomon codes for single-source combination networks. We also prove that, for some cases, the linear Boolean network codes are optimal in the sense of minimum network uses. In the thesis, we further consider two-source network coding problem for combination networks and other specific networks. We develop a method …

Feasibility Of Supercritical Carbon Dioxide As A Drilling Fluid For Deep Underbalanced Drilling Operations, Anamika Gupta

LSU Master's Theses

Feasibility of drilling with supercritical carbon dioxide to serve the needs of deep underbalanced drilling operations has been analyzed. A case study involving underbalanced drilling to access a depleted gas reservoir is used to illustrate the need for such a research. For this well, nitrogen was initially considered as the drilling fluid. Dry nitrogen, due to its low density, was unable to generate sufficient torque in the downhole motor. The mixture of nitrogen and water, stabilized as foam generated sufficient torque but made it difficult to maintain underbalanced conditions. This diminished the intended benefit of using nitrogen as the drilling …

A Comparative Analysis Of Hurricane Evacuation Traffic Conditions Using Static And Dynamic Traffic Assignments, Santosh Kumar Andem

LSU Master's Theses

This study compares link flows of evacuation traffic using Static Traffic Assignment (STA) with those obtained from Dynamic Traffic Assignment (DTA) and observed traffic counts. The analysis is conducted on a sample of households from South Carolina who evacuated in the face of hurricane Floyd in 1999. The results indicate that traditional static models have the potential to significantly underestimate congestion levels in the network, and DTA models account for nonuniform demand and traffic dynamics in hurricane evacuation much more realistically. From observed traffic counts, traffic volumes vary considerably during an evacuation and the DTA flow estimates generally reproduced these …

Automatic Active Contour Modelling And Its Potential Application For Non-Destructive Testing, Srinath Vepathur Sitaraman

LSU Master's Theses

Active contouring techniques are very useful in medical imaging, digital mapping, non-destructive ultrasonic evaluation, etc. Therefore, we try to explore and investigate the advanced automatic active contouring methods, which can benefit the aforementioned applications. In this thesis work, we study the automatic active contour models adopted for the object characterization, whose extensions could include the potential defect analysis in the ultrasonic non-destructive testing. The active contouring scheme (also called a snake) or an energy minimizing spline, is an algorithm which is very sensitive to the manually marked initial points, and thereby requires an expertly operation. Therefore, we make new research …

Calibration Of Flexural Design Of Concrete Members Reinforced With Frp Bars, Sujata Nandkumar Kulkarni

LSU Master's Theses

Fiber Reinforced Polymer (FRP) composites have been increasingly accepted in the construction industry as a promising substitute for steel. Bridge deck deterioration is one of the most common deficiencies in a bridge system. The use of FRP bars as reinforcement for concrete bridge decks provides a potential for increased service life, economic, and environmental benefits. This research presents the development of resistance models for concrete members (beams and slabs) reinforced with FRP bars (FRP-RC), for carrying out reliability analysis. The scope of this model is limited to the flexural behavior only; i.e. the failures are not shear failure and debonding. …