Engineering Commons^™

A 2-D Finite Element Modeling And Simulation Of 3-Roll Forming, Wenbo Zhao

LSU Master's Theses

Medium to large diameter carbon steel pipes are widely used in various applications such as gas and fluid transportation, tunnels construction and building construction. Based on manufacturing techniques and characteristics, they are mainly categorized into three categories: Seamless pipe, Butt-welded pipe and Spiral pipe. The forming of butt-welded and spiral pipe is often performed by a technique called 3-roller bending. While traditional trial-and-error method is costly, the geometry complexity, along with material nonlinearity makes exact theoretical analysis difficult unless heavy simplified assumptions are made. While the forming parameters in the 3-roller forming process of butt-welded pipe has been studied in …

An Evaluation Of The Groundwater Microbial Community's Toluene Biogenesis Potential At A Site In Southeast Louisiana, Michael A. Griffin Jr.

LSU Master's Theses

The broad goal of the research described in this thesis was to better understand the potential for biological toluene production to occur in groundwater at a Superfund Site located in southeast Louisiana. Previous literature reported that bacterial isolates under laboratory test conditions and undefined microbial communities in anaerobic sludge digesters and seasonally stratified lakes can produce toluene biogenically. Most of the research reported on this subject previously, however, has been on systems in Europe and little research has been reported previously on such phenomena in North America.

In the research described here, studies were conducted utilizing groundwater from a Superfund …

Diversionary Behavior During Congestion, Venkata Vamsikrishna Peddisetty

LSU Master's Theses

Most people in the US prefer to travel on freeways, but when there is congestion they divert onto local routes to avoid travel delay. This study measures the traffic diversion induced by an increase in congestion on I-10 freeway in Baton Rouge during congestion, using a Bluetooth Detection System. The main objective of the study was to identify the difference in the level of congestion on the I-10 between the Mississippi River Bridge and the I-10/I-12 split and the level of congestion on local roads that triggers traffic to divert from the freeway to parallel arterials. Other objectives include measuring …

Multi-Hazard Performance Assessment Of High-Rise Buildings, Jad El Khoury Antoun

LSU Master's Theses

In the last few decades, there has been an important increase in building high-rise constructions in many cities around the world. Since they offer several benefits in populous areas in terms of space efficiency, economy and sustainability, tower buildings attracted practitioners and researchers to understand better their exclusive behavior and response to natural hazards (e.g., hurricanes, earthquakes). Because of their flexibility and their commonly limited damping, skyscrapers are more susceptible to wind and earthquake actions than low- and mid-rise buildings. Moreover, many locations are prone to multiple hazards; hence, it is important to understand thoroughly the structural behavior of structures …

New Multi-Resolution Shortest-Path Navigation Techniques Using The Ndvi Imagery, Rui Tian

LSU Master's Theses

In this thesis work, we study the visible-light and near-infrared images for practical applications. Different colormaps, contours, or pixel-based indicators can be extracted from these optical images. Among them, normalized difference vegetation index (NDVI) has been widely utilized for applications in vegetation-health monitoring, geological survey, and climate forecast, etc. recently. We extend the use of NDVI for the navigation over the uncharted geographical areas. Henceforth, we propose a new algorithm which is called multi-resolution Dijkstra algorithm to find the approximate shortest paths within the large planar graphs representing the real terrains.

The outline of this thesis is briefed as follows. …

High-Throughput Droplet Barcoding And Automated Image Analysis In Microfluidic Droplet Trapping Array, Manibarathi Vaithiyanathan

LSU Master's Theses

Molecularly-targeted therapeutics and personalized medicine have dramatically increased the median survival rate of patients suffering from cancer. However, cellular heterogeneity and the personalized nature of cancer have resulted in the limited success of single drug treatments which has led to the use of multiple therapeutic combinations. This has required the development of new analytical methods capable of multiplexed high-throughput screening (HTS) technologies necessary to identify is single or multi-agent therapies are effective in ex vivo samples like liquid biopsies. Droplet microfluidic devices have garnered significant interest to facilitate high-throughput, single cell analysis of heterogeneous populations. However, these devices are still …

Mechanistic Modeling Of Nanoparticle-Stabilized Supercritical Co2 Foams And Its Implication In Field-Scale Eor Applications, Doris Patricia Ortiz Maestre

LSU Master's Theses

Previous experimental studies show that nanoparticle-stabilized supercritical CO₂ foams (or, NP CO₂ foams) can be applied as an alternative to surfactant foams, in order to reduce CO₂ mobility in gas injection enhanced oil recovery (EOR). These nanoparticles, if chosen correctly, can be an effective foam stabilizer attached at the fluid interface in a wide range of physicochemical conditions.

By using NP CO₂ foam experiments available in the literature, this study performs two tasks: (i) presenting how a mechanistic foam model can be used to fit experimental data and determine required model parameters, and (ii) investigating the …

Field Investigation And Performance Evaluation Of Interface Bonding Between Pavement Layers, Ramendra N. Das

LSU Master's Theses

Proper bonding between pavement layers is essential to provide a monolithic pavement structure that allows distribution of loading over a larger area. Inadequate interface bonding may cause debonding or shear failure at the interface due to the accumulation of concentrated tensile stresses at the bottom of the overlay. Tack coat, a light application of asphaltic cement emulsion is applied on the existing surface to create a strong adhesive bond between pavement layers. The objectives of this study are to investigate the effects of various factors affecting bond strength between hot-mix asphalt (HMA) overlay and underlying pavement layers in the field. …

Microgrid Energy Management With Flexibility Constraints: A Data-Driven Solution Method, Okan Ciftci

LSU Master's Theses

Microgrid energy management is a challenging and important problem in modern power systems. Several deterministic and stochastic models have been proposed in the literature for the microgrid energy management problem. However, more accurate models are required to enhance flexibility of the microgrids when accounting for renewable energy and load uncertainties. This thesis proposes key contributions to solve the energy management problem for smart building (or small-scale microgrid). In Chapter 3, a deterministic energy management model is presented taking into account system flexibility requirements. Energy storage systems are deployed to enhance the grid flexibility and ramping capability. The objective function of …

Prevention Of Alkali-Silica Reaction (Asr) In Lightweight Wellbore Cements Containing Silica-Based Microspheres, Dylan Albers

LSU Master's Theses

Drilling through low pressure formations, either offshore or through depleted formations, requires the use of low density fluids to prevent lost circulation ensuring proper placement of cement for proper zonal isolation and structural integrity. Achieving these densities in cements can be done through foaming the cement, increasing water content, or using silica-based microspheres. Water extended cements are useful at densities down to 13 ppg below which only foaming and silica-based microspheres can be used. Each of these methods coming with individual limitations, with foamed cements being sensitive to high pressures and silica-based microspheres having chemical instability in the high alkalinity …

Application Of Surface Treatments To Improve Fuel Efficiency Of Internal Combustion Engines, Amirabbas Akbarzadeh

LSU Master's Theses

To improve the tribological performance of contacting surfaces, different surface modification methods can be employed. Surface texturing and surface coating are examples of viable techniques developed for this purpose. Surface texturing involves creating micropatterns on the contacting surfaces while surface coating requires depositing a thin layer of a suitable material on the surface(s) to improve the component’s friction and wear characteristics. The performance of textured surfaces is affected by the geometric characteristic of textures.When dealing with surface coating parameters, the parameters of interests are the type of coating materials and their thicknesses.

The current study aims to experimentally study the …

Optimization Of The Hot Embossing Parameters And Sintering Characterization For Alumina/Berea Sandstone Sintering, Justin F. Robbins

LSU Master's Theses

The purpose of this study is to investigate the process of hot embossing on alumina based ceramics as a cost-efficient procedure for manufacturing microfluidic testing components. Alumina ceramics were used as an exploratory phase for the final objective of the project, manufacturing of Berea sandstone based ceramic samples. Previous research has shown potential in using hot embossing on Alumina based ceramics; however, complications with extrusion and micro-structure quality were observed. For this reason, the research performed aimed to produce Berea Sandstone based components by first improving upon the embossing quality of alumina ceramics.

The thesis first investigates changes in the …

Empirical Study: Exploring Medication Adherence For Medicaid Insured Asthma Patients In Louisiana, Archana Nittala

LSU Master's Theses

Asthma is a chronic disease whose effects are controlled/ prevented using appropriate medication. Although benefits of asthma medication is well known, poor medication adherence among asthma patients has been reported. Medication non-adherence is associated to increased healthcare costs, unnecessary hospital utilization, readmission and even death in few cases. The overarching goal of this research was to evaluate the impact of medication non-adherence on hospital admissions, and identify key factors that result in medication non-adherence for Medicaid insured asthma patients.

To achieve these objectives, Correlation analysis, T-tests, Multivariate logistic analysis and odds ratios were performed. Based on results of the study, …

Experimental Study And Modeling Of Smart Loss Circulation Materials; Advantages And Promises, Ahmed Khaled Abdelmaksoud Mansour

LSU Master's Theses

Lost circulation occurs when mud or cement is lost to the formation while drilling. Lost circulation has been a huge problem and may cause heavy financial costs in the form of lost rig time, mud fluid and in severe cases, well blowout with serious environmental and safety consequences. Despite extensive advances in the last couple of decades, lost circulation materials used today still have disadvantages such as damaging production zones, plugging drilling tools or failing to seal the fractures. Here, we propose a new class of smart expandable lost circulation material (LCM) to remotely control the expanding force and functionality …

Data-Driven Abstraction, Vivian Mankau Ho

LSU Master's Theses

Given a program analysis problem that consists of a program and a property of interest, we use a data-driven approach to automatically construct a sequence of abstractions that approach an ideal abstraction suitable for solving that problem. This process begins with an infinite concrete domain that maps to a finite abstract domain defined by statistical procedures resulting in a clustering mixture model. Given a set of properties expressed as formulas in a restricted and bounded variant of CTL, we can test the success of the abstraction with respect to a predefined performance level. In addition, we can perform iterative abstraction-refinement …

A Mixed Methods Study Of The Performance And Dynamics Of University Technology Transfer And Commercialization, Berk Dogan

LSU Master's Theses

The technology transfer and commercialization encompasses various activities involved in acquiring intellectual property rights for the inventions, marketing of the inventions, and diffusing into the public domain through commercialization. Although many scholars have studied technology transfer within the academic institutions' context, the process has been assumed to be sequential. The technology transfer process is a complex process to be generalized as a linear sequential process. A mixed methods approach has been used to triangulate the findings from the literature review and descriptive analyses to conceptualize an alternative model that reflects the actual process more accurately. It was found that the …

Determination Of Recovery Time For A Simple Lifting Task Based On Weight, Frequency, And Duration Of The Lift, Milad Amini

LSU Master's Theses

Musculoskeletal disorders (MSDs) are a leading cause of injury in American workplaces which cost the economy billions of dollars each year. Extensive research has shown that job fatigue is one of the causes of MSDs. Allocating frequent and adequate rest break is suggested to be an effective method in mitigating the work overload and fatigue prevention. The objective of this research was to determine rest periods for lifting tasks based on the activity heart rate and by using a set of task variables. Twenty-four university male students took part in this study. The two response variables were perceived level of …

Reuse And Recycling Drill Cuttings In Concrete Applications, Maziar Foroutan

LSU Master's Theses

Drill cutting (DC) is a major waste produced during petroleum extraction, which could present a major source of contamination to soil and groundwater, if not disposed of properly. The objective of this study aims to test the hypothesis that drill cuttings can be incorporated as an aggregate in the production of concrete, and is suitable for use in controlled, low-strength material (CLSM) for non-structural applications. To achieve this objective, the physical and consensus properties of drill cuttings were characterized. Concrete mixtures were designed for CLSM applications with and without drill cuttings sampled from two sources. Prepared concrete mixes were then …

Improved Subset Generation For The Mu-Decoder, Utsav Agarwal

LSU Master's Theses

The MU-Decoder is a hardware subset generator that finds use in partial reconfiguration of FPGAs and in numerous other applications. It is capable of generating a set S of subsets of a large set Z_n with n elements. If the subsets in S satisfy the “isomorphic totally- ordered property”, then the MU-Decoder works very efficiently to produce a set of u subsets in O(log n) time and Θ(n √u log n) gate cost. In contrast, a vain approach requires Θ(un) gate cost. We show that this low cost for the MU-Decoder can be achieved without the isomorphism constraint, thereby allowing …

Aperiodic Multilayer Graphene Based Tunable And Switchable Thermal Emitter At Mid-Infrared Frequencies, Safura Sharifi

LSU Master's Theses

Over the past few decades, there have been tremendous innovations in electronics and photonics. The development of these ultra-fast growing technologies mostly relies on fundamental understanding of novel materials with unique properties as well as new designs of device architectures with more diverse and better functionalities. In this regard, the promising approach for next-generation nanoscale electronics and photonics is to exploit the extraordinary characteristics of novel nanomaterials. There has been an explosion of interest in graphene for photonic applications as it provides a degree of freedom to manipulate electromagnetic waves. In this thesis, to tailor the broadband blackbody radiation, new …

Transport And Degradation Of Oil Residues On Coastal Beaches, Sirui Wen

LSU Master's Theses

Fourchon Beach, a 9-mile coastal headland located in Louisiana Gulf Coast, has been heavily impacted by the Deepwater Horizon (DWH) oil spill, which began on April 20th 2010. Once on the beach, the oil spill residues were moved, suspended and transported by subsequent washover events. These washover events occur during storm surges, hurricanes or other situations with high water levels; pushing oil residues from the subtidal and intertidal zone of the beach and then depositing them in the supratidal marshes and mudflat areas. In order to determine the impacts of washover events on oil residues, two complementary studies regarding degradation …

Characterizing The Hydrodynamics Of A Meandering River Neck Cutoff, Christopher Turnipseed

LSU Master's Theses

Meandering river systems often experience a geomorphic phenomenon known as a neck cutoff. The White River of Arkansas has recently undergone several neck cut offs, which have provided a unique opportunity to collect field measurements of the first two years after the opening of the cutoff. In this study the field data was complemented with hydrodynamic simulations to assess the significance of different flow conditions. The findings suggest that flood events play a substantial role in the geomorphic adjustment of the river to the cutoff.

Cuticle Accumulation Of Petrogenic Pahs On Spartina Alterniflora: A Novel Exposure Pathway For Marsh Biota, Joyce Gabriel Kassenga

LSU Master's Theses

Louisiana coastal marshes were heavily impacted by the 2010 Deepwater Horizon oil spill. MC252 oil pollution in coastal marshes lead to the exposure of biota to polycyclic aromatic hydrocarbons (PAHs). PAHs are persistent organic pollutants that can reside and accumulate in marsh biota. The aim of this study was to investigate the uptake mechanisms of PAHs by Spartina alterniflora at heavily oiled Bay Jimmy marsh in Barataria Basin, Louisiana. Study objectives were to quantify and investigate the uptake mechanisms of PAHs in the leaves of Spartina. The plant/air partitioning of PAHs was studied using a fugacity approach to determine their …

Photo-Effects On Current Transport In Back-Gate Graphene Field-Effect Transistor, Xinlu Chen

LSU Master's Theses

Graphene, which has attracted wide attention because of its two-dimensional structure and high carrier mobility, is a promising candidate for potential application in optics and electronics. In this dissertation, the photonic effects on current transport in back-gate graphene field-effect transistor is investigated. Chemical vapor deposition (CVD) on metal provides a promising way for large area, controllability and high quality graphene film. The transfer and back-gate transistor fabrication processes are proposed in this dissertation. The theoretical analysis of photodetector based on back-gate graphene field-effect transistor has been done. It is shown that the photo-electronic current consists of current contributions from photovoltaic, …

Novel Design And Synthesis Of Nanostructured Electrode Materials For Advanced Lithium Ion Batteries, Zhiqiang Xie

LSU Master's Theses

Nowadays, rechargeable lithium-ion batteries (LIBs) have been widely used as energy storage devices for portable electronic devices. The increasing demand for their emerging applications in hybrid electric vehicles (HEVs) and electric vehicles (EVs) requires us to develop LIBs with higher energy density and power density. However, both the commercial cathode material (LiCoO2) and anode material (graphite) exhibit low specific capacity and poor rate capability, which severely hinder the practical application of lithium-ion batteries for transportation. This thesis mainly includes four research works on novel design and synthesis of nanostructured electrode materials for advanced lithium-ion batteries. To improve the electrochemical performances …

Analysis Of Cost And Energy Performance Of Geothermal Heat Pump Systems In Southern Louisiana, Claudia De Lourdes Duran Tapia

LSU Master's Theses

In the last three decades of geothermal heat pump (GHP) industry, there has been an urge to present data, especially performance and itemized installation cost, as a plan to reduce the lack of knowledge and trust towards GHP systems for heating and cooling. The potential of GHPs in hot and humid climates is significant [Tao and Zhu, 2012]. However, past research efforts have demonstrated this potential through the use of simulation rather than real-time data. Therefore, the scope of work for this research is to investigate GHP system applications for residential buildings in areas with hot and humid climates. Based …

Network Performance Analysis Using Cisco Virl, Charitra Maharjan

LSU Master's Theses

This thesis provides a detailed analysis of the effects of TCP and UDP traffic over a LAN and WAN medium. In addition, it also analyses some real time applications like audio, video and web browsing that is affected by TCP traffic while sharing a bottleneck node and/or link resources. As network industry is growing continuously, the network administrator should be aware of TCP and UDP traffic that is traversing through their network. The analysis and monitoring of the traffic is crucial as it directly affects the performance of the network. Finding a cause for the poor performance of the network …

Characterization Of Hybrid Synthetic/Adipose-Derived Ecm Scaffolds, John Nicholas Poche

LSU Master's Theses

Evolving out of a need to address growing concerns regarding current methods of tissue transplantation, the field of tissue engineering seeks to facilitate the regeneration of viable tissue through the use of cellular scaffolds. The first aim of this thesis was to provide a summary of the current literature on advances in biomaterial synthesis and pertaining methods of stem cell delivery in tissue engineering. Improvements in the processing of decellularized tissue and the expansion of synthetic hydrogels as platforms for stem cell encapsulation have led to the development of extracellular matrix (ECM)-based hybrid hydrogels. These stem cell scaffolds are currently …

New Efficient And Robust Multimedia Archiving Technique Using Quick-Response Codes, Sayani Sarkar

LSU Master's Theses

A Quick Response (QR) code is a two-dimensional bar-code, which is quite popular due to its excellent storage capacity and error resilience. Generally, QR codes are widely used to store text information such as URL links, geographical coordinates, name cards, inventory information, authorship, etc. To reach the current limit of QR codes, in this thesis, we would like to propose an innovative multimedia archiving technique, which is built upon the advanced signal processing scheme to tackle the multiple QR codes all at once. The multimedia data often include texts, images, audio data, special-purpose codes, music files etc. The recently proposed …

Unsteady Flow Simulations To Develop Model Scale Discharge Hydrographs For The Expanded Small Scale Physical Model Of The Mississippi River, Ronald Joseph Rodi

LSU Master's Theses

Small-scale HEC-RAS models were used to analyze discharges used to test the Louisiana State University and the Louisiana Coastal Protection & Restoration Authority Expanded Small Scale Physical Model (ESSPM) of the Mississippi River. The HEC-RAS models extend from River Mile 228.4 (Baton Rouge) to the Gulf of Mexico that includes the ESSPM reach which begins at River Mile 173.5 (Donaldsonville). The model scales are 1:6000 horizontally and 1:400 vertically. Using the historic river discharges from 2008 through 2015, the small-scale numerical models proved capable of replicating observed stages along eleven sites of the lower Mississippi River within the targets of …