Engineering Commons^™

Sulfur Dioxide Crossover During The Production Of Hydrogen And Sulfuric Acid In A Pem Electrolyzer, John A. Staser, John W. Weidner

Faculty Publications

A proton exchange membrane (PEM) electrolyzer has been investigated as a viable system for the electrolysis step in the thermochemical conversion of sulfur dioxide to sulfuric acid for the large-scale production of hydrogen. Unfortunately, during operation, sulfur dioxide can diffuse from the anode to the cathode. This has several negative effects, including reduction to sulfur that could potentially damage the electrode, consumption of current that would otherwise be used for the production of hydrogen, introduction of oxygen and SO₂ to the hydrogen stream, and loss of sulfur to the cycle. However, proper water management can reduce or eliminate the …

The Effect Of Copt Crystallinity And Grain Texturing On Properties Of Exchange-Coupled Fe/Copt Systems, H. Oguchi, A. Zambano, M. Yu, Jason R. Hattrick-Simpers, D. Banerjee, Y. Liu, Z. L. Wang, J. P. Liu, S. E. Lofland, D. Josell, I. Takeuchi

Faculty Publications

The effect of the crystallinity and the grain texturing of CoPt hard layers on exchange coupled Fe/CoPt soft/hard magnetic systems was studied using gradient thickness multilayer thin films. We have studied the hard layer structures by transmission electron microscopy and x-ray diffraction, and characterized the exchange coupling interaction through magnetization loops obtained by the magneto-optical Kerr effect measurement. We found that exchange coupling strongly depends on the crystalline characteristics of the CoPt hard layer. There is correlation between the mixture of different grain orientations of the CoPt hard layer and coupling efficiency. In particular, interlayer coupling is enhanced when there …

Polymer Composite And Nanocomposite Dielectric Materials For Pulse Power Energy Storage, P. Barber, S. Balasubramanian, Y. Anguchamy, S. Gong, A. Wibowo, H. Gao, Harry J. Ploehn, Hans-Conrad Zur Loye

Faculty Publications

This review summarizes the current state of polymer composites used as dielectric materials for energy storage. The particular focus is on materials: polymers serving as the matrix, inorganic fillers used to increase the effective dielectric constant, and various recent investigations of functionalization of metal oxide fillers to improve compatibility with polymers. We review the recent literature focused on the dielectric characterization of composites, specifically the measurement of dielectric permittivity and breakdown field strength. Special attention is given to the analysis of the energy density of polymer composite materials and how the functionalization of the inorganic filler affects the energy density …

Flame Interactions And Burning Characteristics Of Two Live Leaf Samples, Brent M. Pickett, Carl Isackson, Rebecca Wunder, Thomas H. Fletcher, Bret W. Butler, David R. Weise

Faculty Publications

Combustion experiments were performed over a flat-flame burner that provided the heat source for multiple leaf samples. Interactions of the combustion behavior between two leaf samples were studied. Two leaves were placed in the path of the flat-flame burner, with the top leaf 2.5 cm above the bottom leaf. Local gas and particle temperatures, as well as local oxygen concentrations, were measured along with burning characteristics of both leaves. Results showed that the time to ignition of the upper leaf was not significantly affected by the presence of the lower leaf. The major difference observed was that the time of …

Demonstration Of Microcantilever Array With Simultaneous Readout Using An In-Plane Photonic Transduction Method, Seunghyun Kim, Gregory P. Nordin, Ryan Anderson, Weisheng Hu, Yusheng Qian, Jiguo Song, Jong Wook Noh

Faculty Publications

We demonstrate a microcantilever array with an in-plane photonic transduction method for simultaneous readout of each microcantilever. The array is fabricated on a silicon-on-insulator substrate. Rib waveguides in conjunction with a compact waveguide splitter network comprised of trench-based splitters and trench-based bends route light from a single optical input to each microcantilever on the chip. Light propagates down a rib waveguide integrated into the microcantilever and, at the free end of the microcantilever, crosses a small gap. Light is captured in static asymmetric multimode waveguides that terminate in Y-branches, the outputs of which are imaged onto an InGaAs line scan …

Prediction Of Light Gas Composition In Coal Devolatilization, Ravichandra S. Jupudi, Vladimir Zamansky, Thomas H. Fletcher

Faculty Publications

The chemical percolation devolatilization (CPD) model describes the devolatilization behavior of rapidly heated coal based on the chemical structure of the coal. It predicts the overall char, tar, and light gas yields. This paper presents an improved CPD model with improved capability for predicting light gas composition. This is achieved by incorporating a kinetic model that simulates the release of various light gas species from their respective sources/functional groups in coal. The improved CPD model is validated using experiments with a wire mesh reactor and published experimental observations

Piezoresistive Feedback Control Of A Mems Thermal Actuator, Robert K. Messenger, Quentin Theodore Aten, Timothy W. Mclain, Larry L. Howell

Faculty Publications

Feedback control of MEMS devices has the potential to significantly improve device performance and reliability. One of the main obstacles to its broader use is the small number of on-chip sensing options available to MEMS designers. A method of using integrated piezoresistive sensing is proposed and demonstrated as another option. Integrated piezoresistive sensing utilizes the inherent piezoresistive property of polycrystalline silicon from which many MEMS devices are fabricated. As compliant MEMS structure’s flex to perform their functions, their resistance changes. That resistance change can be used to transduce the structures’ deflection into an electrical signal. The piezoresistive microdisplacement transducer (PMT) …

Estimating Tmr Reliability On Fpgas Using Markov Models, Daniel Mcmurtrey, Keith S. Morgan, Brian Pratt, Michael J. Wirthlin

Faculty Publications

This paper summarizes several reliability models for modeling FPGA reliability using Markov models.

Fingering Instabilities On Reaction Fronts In The Co Oxidation Reaction On Pt(100), D. Bilbao, Jochen A. Lauterbach

Faculty Publications

Fingering instabilities arising from local perturbations to planar reaction fronts in the CO oxidation reaction on Pt(100) are presented. CO oxidation represents a heterogeneous nonlinear system with the necessary kinetic and diffusive transport properties to support the development of fingered wave fronts. External forcing was utilized to create CO wave fronts on an otherwise monostable, O-covered surface, which, upon destabilization, gave rise to fingers of adsorbed CO extending into the O adlayer ahead of the reaction front. Finger spreading and tip-splitting were observed as the finger pattern evolved towards an intrinsic wavelength, independent of the length of the reaction front, …

Predicting Young’S Modulus Of Nanowires From First-Principles Calculations On Their Surface And Bulk Materials, Guofeng Wang, Xiaodong Li

Faculty Publications

Using the concept of surface stress, we developed a model that is able to predict Young’s modulus of nanowires as a function of nanowire diameters from the calculated properties of their surface and bulk materials. We took both equilibrium strain effect and surface stress effect into consideration to account for the geometric size influence on the elastic properties of nanowires. In this work, we combined first-principles density functional theory calculations of material properties with linear elasticity theory of clamped-end three-point bending. Furthermore, we applied this computational approach to Ag, Au, and ZnOnanowires. For both Ag and Aunanowires, our theoretical predictions …

Gene Order Phylogeny Of The Genus Prochlorococcus, Haiwei Luo, Jian Shi, William Arndt, Jijun Tang, Robert Friedman

Faculty Publications

Background
Using gene order as a phylogenetic character has the potential to resolve previously unresolved species relationships. This character was used to resolve the evolutionary history within the genus Prochlorococcus, a group of marine cyanobacteria.

Methodology/Principal Findings
Orthologous gene sets and their genomic positions were identified from 12 species of Prochlorococcus and 1 outgroup species of Synechococcus. From this data, inversion and breakpoint distance-based phylogenetic trees were computed by GRAPPA and FastME. Statistical support of the resulting topology was obtained by application of a 50% jackknife resampling technique. The result was consistent and congruent with nucleotide sequence-based and gene-content based …

A Special-Purpose Architecture For Solving The Breakpoint Median Problem, Jason D. Bakos, Panormitis E. Elenis

Faculty Publications

In this paper, we describe the design for a co-processor for whole-genome phylogenetic reconstruction. Our current design performs a parallelized breakpoint median computation, which is an expensive component of the overall application. When implemented on a field-programmable gate array (FPGA), our hardware breakpoint median achieves a maximum speedup of 1005times over software. When the coprocessor is used to accelerate the entire reconstruction procedure, we achieve a maximum application speedup of 417times. The results in this paper suggest that FPGA-based acceleration is a promising approach for computationally expensive phylogenetic problems, in spite of the fact that the involved algorithms are based …

Decentralized Perimeter Surveillance Using A Team Of Uavs, Randal Beard, David Casbeer, Derek Kingston

Faculty Publications

Sponsorship: NASA, AFOSR. This paper develops a distributed algorithm to maintain a current estimate of the state of the perimeter using a team of UAVs. Using notions of consensus, an algorithm is developed and shown to distribute a UAV team uniformly around the perimeter.

Maximizing Warfighter Capability Using Surveyed Necessity Measurement: Application To The Usaf F-15c Fleet, John M. Colombi, David R. Jacques, Dennis D. Strouble

Faculty Publications

Within the Department of Defense, with changing missions to counter dynamic and asymmetrical threats, the acquisition workforce strives to maximize capability for joint warfighting. How acquisition professionals measure and select capability improvements for the nation’s weapon systems is a perpetual challenge, made even more complex with constrained defense budgets. This study identifies a method for determining which upgrades should be purchased (production) for which aircraft in the F- 15C fleet by optimizing a capability proxy measure. Each upgrade’s “necessity” for a given mission area was obtained by conducting a survey of over 250 experienced F-15C pilots. The solution presented in …

Multi-Break Rearrangements And Breakpoint Re-Uses: From Circular To Linear Genomes, Max A. Alekseyev

Faculty Publications

Multi-break rearrangements break a genome into multiple fragments and further glue them together in a new order. While 2-break rearrangements represent standard reversals, fusions, fissions, and translocations, 3-break rearrangements represent a natural generalization of transpositions. Alekseyev and Pevzner (2007a, 2008a) studied multi-break rearrangements in circular genomes and further applied them to the analysis of chromosomal evolution in mammalian genomes. In this paper, we extend these results to the more difficult case of linear genomes. In particular, we give lower bounds for the rearrangement distance between linear genomes and for the breakpoint re-use rate as functions of the number and proportion …

Improving Reversal Median Computation Using Commuting Reversals And Cycle Information, William Arndt, Jijun Tang

Faculty Publications

In the past decade, genome rearrangements have attracted increasing attention from both biologists and computer scientists as a new type of data for phylogenetic analysis. Methods for reconstructing phylogeny from genome rearrangements include distance-based methods, MCMC methods, and direct optimization methods. The latter, pioneered by Sankoff and extended with the software suites GRAPPA and MGR, is the most accurate approach, but is very limited due to the difficulty of its scoring procedure—it must solve multiple instances of the reversal median problem to compute the score of a given tree. The reversal median problem is known to be NP-hard and all …

Evaluating Shape Correspondence For Statistical Shape Analysis: A Benchmark Study, Brent C. Munsell, Pahal Dalal, Song Wang

Faculty Publications

This paper introduces a new benchmark study to evaluate the performance of landmark-based shape correspondence used for statistical shape analysis. Different from previous shape-correspondence evaluation methods, the proposed benchmark first generates a large set of synthetic shape instances by randomly sampling a given statistical shape model that defines a ground-truth shape space. We then run a test shape-correspondence algorithm on these synthetic shape instances to identify a set of corresponded landmarks. According to the identified corresponded landmarks, we construct a new statistical shape model, which defines a new shape space. We finally compare this new shape space against the ground-truth …

A C-Band Scatterometer Simultaneous Wind/Rain Retrieval Method, David G. Long, Congling Nie

Faculty Publications

Using collocated ERS scatterometer (ESCAT), Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR), and European Centre for Medium-Range Weather Forecasts (ECMWF) data, the effects of rain on ESCAT wind-only retrieval are evaluated. Additional scattering from rain causes estimated wind speeds to appear higher than expected. Selected directions of the rain-corrupted wind vectors are biased toward along-track directions under conditions of heavy rain, which is regardless of the true wind direction. Rain becomes more significant for data acquired at a high incidence angle. To compensate for rain-induced backscatter, a simultaneous wind/rain retrieval (SWRR) method, which simultaneously retrieves wind velocity and surface …

Estimation Of Hurricane Winds From Seawinds At Ultrahigh Resolution, David G. Long, Brent A. Williams

Faculty Publications

Although the SeaWinds scatterometer was not specifically designed to observe tropical cyclones, new high-resolution wind products resolve much of the horizontal structure of these storms. However, these higher resolution products (2.5 km) are inherently noisier than the standard 25-km near-surface wind products. These noise levels combined with rain contamination complicate high-resolution wind estimation-particularly in tropical cyclones. Fortunately, tropical cyclones have structures that can be exploited by using a wind field model. This paper develops a new procedure for hurricane wind field estimation from the SeaWinds instrument at ultrahigh resolution. A simplified hurricane model is developed to provide prior information to …

Reduced-Feedback Linear Precoding With Stable Performance For The Time-Varying Mimo Broadcast Channel, Michael A. Jensen, Adam L. Anderson, James R. Zeidler

Faculty Publications

This work explores the performance of a multiple-input multiple-output broadcast channel where both the transmitter and receivers have outdated channel knowledge due to node motion or other time-variations in the communication channel. A performance analysis based on measured channel responses reveals significant throughput degradation for optimal linear and nonlinear precoding strategies unless the channel state information (CSI) is frequently fed back to the transmitter. The paper then develops a linear beamforming precoding strategy based on channel distribution information in the form of a full spatial correlation matrix for each user. This algorithm is shown to provide highly stable communication, with …

A Low-Cost Open-Hardware Wideband Multiple-Input-Multiple-Output (Mimo) Wireless Channel Sounder, Michael A. Jensen, Jon W. Wallace, B. T. Maharaj, Louis P. Linde

Faculty Publications

Due to the complexity of multiple-input-multiple- output (MIMO) wireless channels, direct measurement is the main viable option for accurate characterization. Details on a new low-cost wideband channel sounder are presented, which was mainly constructed from conventional instruments and components. This switched architecture system is similar to commercial channel sounders and has modest cost (< US$ 50000). The sounder operates in the 2- to 8-GHz range with up to 100 MHz of instantaneous bandwidth and supports eight transmitters and receivers, which are sufficient to support the development and assessment of current and future MIMO wireless systems. In this "open-hardware" project, the hardware design and software components are openly available to other researchers interested in developing or enhancing the MIMO measurement capability. The actual systems built at the University of Pretoria, Pretoria, South Africa, and Brigham Young University, Provo, UT, are presented, as are some example studies.

Optimal Estimation Of Calibration Parameters In Polarimetric Microwave Radiometers, David G. Long, Derek Hudson

Faculty Publications

Methods for internal calibration of a certain class of microwave polarimetric radiometers are presented by Piepmeier. In that work, the calibration parameters are estimated algebraically. We demonstrate that Bayesian estimation decreases the root-mean-square error of the estimates by a factor of two. This improvement is obtained by using knowledge of the noise structure of the measurements and by utilizing all of the information provided by the measurements. Drawbacks are the increased complexity of the method and an increase in computation. We also extend the method to estimate several hardware component parameters of interest in system calibration.

Theory And Application Of Motion Compensation For Lfm-Cw Sar, David G. Long, Evan C. Zaugg

Faculty Publications

Small low-cost high-resolution synthetic aperture radar (SAR) systems are made possible by using a linear frequency-modulated continuous-wave (LFM-CW) signal. SAR processing assumes that the sensor is moving in a straight line at a constant speed, but in actuality, an unmanned aerial vehicle (UAV) or airplane will often significantly deviate from this ideal. This nonideal motion can seriously degrade the SAR image quality. In a continuous-wave system, this motion happens during the radar pulse, which means that existing motion compensation techniques that approximate the position as constant over a pulse are limited for LFM-CW SAR. Small aircraft and UAVs are particularly …

Sequestration And Ultrasound-Induced Release Of Doxorubicin From Stabilized Pluronic P105 Micelles, John D. Pruitt, William G. Pitt

Faculty Publications

Controlled drug delivery from micelles requires that the micelles remain stable when diluted below their critical micelle concentration, such as upon injection into blood. A cross-linked, interpenetrating network of N,N-diethylacrylamide (NNDEA) was polymerized in the core of Pluronic P105 micelles to stabilize temporarily the micelles at concentrations below the critical micellar concentration of free P105. The stabilized Pluronic micelles (called Plurogels) were able to sequester the drug doxorubicin (Dox) and protect HL-60 cells from the drug at concentrations where non-stabilized Pluronic provided no protection. The protection lasted ~ 12 hr, which is similar to the half-life of the particles. Application …

A-Priori Analysis Of Conditional Moment Closure Modeling Of A Temporal Ethylene Jet Flame With Soot Formation Using Direct Numerical Simulation, David O. Lignell, John C. Hewson, Jacqueline H. Chen

Faculty Publications

Modeling soot formation in turbulent nonpremixed combustion is a difficult problem. Unlike most gaseous combustion species, soot lacks a strong state relationship with the mixture fraction due to unsteady formation rates which overlap transport timescales, and strong differential diffusion between gaseous species and soot. The conditional moment closure model (CMC) has recently been applied to the problem of turbulent soot formation. A challenge in CMC modeling is the treatment of differential diffusion. Three-dimensional direct numerical simulation (DNS) of a nonpremixed ethylene jet flame with soot formation has been performed using a 19 species reduced ethylene mechanism and a four-step, three-moment, …

Phylogenetic Reconstruction From Transpositions, Feng Yue, Meng Zhang, Jijun Tang

Faculty Publications

Background
Because of the advent of high-throughput sequencing and the consequent reduction in the cost of sequencing, many organisms have been completely sequenced and most of their genes identified. It thus has become possible to represent whole genomes as ordered lists of gene identifiers and to study the rearrangement of these entities through computational means. As a result, genome rearrangement data has attracted increasing attentions from both biologists and computer scientists as a new type of data for phylogenetic analysis. The main events of genome rearrangements include inversions, transpositions and transversions. To date, GRAPPA and MGR are the most accurate …

Ultracompact Awg Using Air-Trench Bends With Perfluorocyclobutyl Polymer Waveguides, Seunghyun Kim, Gregory P. Nordin, John Ballato, Yongbin Lin, Nazli Rahmanian, Dennis W. Smith, Chris Topping

Faculty Publications

Using air-trench bends, an ultracompact 8 8 arrayed waveguide grating (AWG) demultiplexer (200-GHz channel spacing) for wavelength-division multiplexing (WDM) has been designed and fabricated with perfluorocyclobutyl (PFCB) core and clad co-polymers on a polyimide substrate. Compared to a conventional AWG in the same material system, the air-trench bend AWG shrinks the required chip area by a factor of 20. The decreased size is a factor in reducing the measured thermal shift to -0.012 nm/ C and decreasing the polarization-dependent wavelength shift to 1.3 nm.

Evaluating Three-Dimensional Effects On The Behavior Of Compliant Bistable Micromechanisms, Brian B. Cherry, Larry L. Howell, Brian D. Jensen

Faculty Publications

Fully compliant bistable micromechanisms (FCBMs) have potential use in numerous applications, including switches, relays, shutters, and low-power sensing arrays. Two-dimensional finite element models for these FCBMs have been used in device analysis and design, and provided an adequate match to preliminary experimental data. However, with more extensive experimentation over a large range of designs, some results proved to be radically different than predicted, with trends not consistent with effects such as stiction or electrostatic forces. Two different types of behavior, Behavior 1 and Behavior 2, are observed and explained, only one of which is predicted by 2-D models. This paper …

Windsat Passive Microwave Polarimetric Signatures Of The Greenland Ice Sheet, David G. Long, Li Li, Peter Gaiser, Mary R. Albert, Elizabeth M. Twarog

Faculty Publications

WindSat has systematically collected the first global fully polarimetric passive microwave data over both land and ocean. As the first spaceborne polarimetric microwave radiometer, it was designed to measure ocean surface wind speed and direction by including the third and fourth Stokes parameters, which are mostly related to the asymmetric structures of the ocean surface roughness. Although designed for wind vector retrieval, WindSat data are also collected over land and ice, and this new data has revealed, for the first time, significant land signals in the third and fourth Stokes parameter channels, particularly over Greenland and the Antarctic ice sheets. …

In-Plane Photonic Transduction Of Silicon-On-Insulator Microcantilevers, Ryan Anderson, Seunghyun Kim, Gregory P. Nordin, Jong Wook Noh, Jaime Cardenas

Faculty Publications

We demonstrate an in-plane photonic transduction method for microcantilevers, which have been widely investigated for sensor applications. In our approach the microcantilever is etched to form a single mode rib waveguide. Light propagates down the microcantilever and crosses a small gap at the free end of the microcantilever, some of which is captured by an asymmetrical multimode waveguide that terminates in a Y-branch. The Y-branch outputs are used to form a differential signal that is monotonically dependent on microcantilever deflection. The measured differential signal matches simulation when microcantilever rotation is properly accounted for. The measured differential signal sensitivity is 1.4 …