Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Faculty Publications

Discipline
Institution
Keyword
Publication Year
File Type

Articles 1861 - 1890 of 3295

Full-Text Articles in Engineering

The Effect Of Isostatic Pressing On The Dielectric Properties Of Screen Printed Ba0.5Sr0.5Tio3 Thick Films, Siwei Wang, Lingling Zhang, Jiwei Zhai, Fanglin Chen Jan 2013

The Effect Of Isostatic Pressing On The Dielectric Properties Of Screen Printed Ba0.5Sr0.5Tio3 Thick Films, Siwei Wang, Lingling Zhang, Jiwei Zhai, Fanglin Chen

Faculty Publications

Ba0.5Sr0.5TiO3 thick films with B2O3–Li2O glass sintering aid were prepared by the screen printing method on Al2O3 substrates. A 200 MPa isostatic pressure was applied to the films before sintering. After being sintered at 950∘C, lower porosity and denser microstructure was obtained compared with the films without isostatic pressing. The dielectric constant and dielectric loss were 238 and 0.0028, respectively. A tunability of 61.7% was obtained for the isostatic pressed films, a 27.8% enhancement compared to unpressurized films. These results suggest that isostatic pressing …

Go to article

Wind Loading On Trees Integrated With A Building Envelope, Aly Mousaad Aly, Alberto Zasso, Girma Bitsuamlak, Alberto Nicola Longarini, Arindam Gam Chowdhury Jan 2013

Wind Loading On Trees Integrated With A Building Envelope, Aly Mousaad Aly, Alberto Zasso, Girma Bitsuamlak, Alberto Nicola Longarini, Arindam Gam Chowdhury

Faculty Publications

With the sustainability movement, vegetated building envelopes are gaining more popularity. This requires special wind effect investigations, both from sustainability and resiliency perspectives. The current paper focuses on wind load estimation on small- and full-scale trees used as part of green roofs and balconies. Small-scale wind load assessment was carried out using wind tunnel testing in a global-effect study to understand the interference effects from surrounding structures. Full-scale trees were investigated at a large open-jet facility in a local-effect study to investigate the wind-tree interaction. The effect of Reynolds number combined with shape change on the overall loads measured at …

Go to article

Applications Of High Throughput (Combinatorial) Methodologies To Electronic, Magnetic, Optical, And Energy-Related Materials, Martin L. Green, Ichiro Takeuchi, Jason R. Hattrick-Simpers Jan 2013

Applications Of High Throughput (Combinatorial) Methodologies To Electronic, Magnetic, Optical, And Energy-Related Materials, Martin L. Green, Ichiro Takeuchi, Jason R. Hattrick-Simpers

Faculty Publications

High throughput (combinatorial) materials science methodology is a relatively new research paradigm that offers the promise of rapid and efficient materials screening, optimization, and discovery. The paradigm started in the pharmaceutical industry but was rapidly adopted to accelerate materials research in a wide variety of areas. High throughput experiments are characterized by synthesis of a “library” sample that contains the materials variation of interest (typically composition), and rapid and localized measurement schemes that result in massive data sets. Because the data are collected at the same time on the same “library” sample, they can be highly uniform with respect to …

Go to article

Molten Carbonates As An Effective Oxygen Reduction Catalyst For 550–650°C Solid Oxide Fuel Cells, Yunhui Gong, Xue Li, Lingling Zhang, Whitney Tharp, Changyong Qin, Kevin Huang Jan 2013

Molten Carbonates As An Effective Oxygen Reduction Catalyst For 550–650°C Solid Oxide Fuel Cells, Yunhui Gong, Xue Li, Lingling Zhang, Whitney Tharp, Changyong Qin, Kevin Huang

Faculty Publications

We report the first study that investigates the use of molten carbonates as an effective catalyst to promote electrochemical oxygen reduction reaction (ORR) at the cathode of intermediate temperature solid oxide fuel cells (IT-SOFCs). A series of binary Li-K carbonate compositions were incorporated into the porous backbones of a commercial cathode assembled in symmetrical impedance cells for electrochemical characterization. Within the temperature range of 550–650◦C, we observed that the polarization and ohmic area-specific resistances of the original sample can be significantly reduced by the introduction of molten carbonates. A new ORR charge-transfer model involving two intermediate species CO5 2− and …

Go to article

Capacity Fade Model For Spinel Limn2O4 Electrode, Yiling Dai, Long Cai, Ralph E. White Jan 2013

Capacity Fade Model For Spinel Limn2O4 Electrode, Yiling Dai, Long Cai, Ralph E. White

Faculty Publications

A mathematical model for the capacity fade of a LiMn2O4 (LMO) electrode is developed in this paper by including the acid attack on the active material and the solid electrolyte interphase (SEI) film formation on the LMO particle surface. The acid generated by the LiPF6 and the solvent decompositions are coupled to the manganese (Mn) dissolution. The decrease of the Li ion diffusion coefficient is involved as another contribution to the capacity fade, which is caused by the passive film formation on the active material surface. The effects of cell practical operation/fabrication conditions and kinetics of …

Go to article

Analysis Of Integrated Engineering And Social Science Approaches For Projects In Developing Communities, Parry F. Garff, Eric C. Dahlin, Carol Ward, Randy Lewis Jan 2013

Analysis Of Integrated Engineering And Social Science Approaches For Projects In Developing Communities, Parry F. Garff, Eric C. Dahlin, Carol Ward, Randy Lewis

Faculty Publications

Current design methods such as appropriate technology, human-centered design, and participatory design are intended to generate development projects that resonate with users in communities in developing countries. These approaches are extremely useful, but often lack adequate documentation about how to collect data on and incorporate users feedback into the project’s design. To address this gap, we introduced social science research methods into a service-learning course for undergraduate engineering students, which culminated in a trip to the communities for whom they were designing, to help students incorporate user feedback into the design of their projects. This paper documents our efforts. One …

Go to article

Characterization Of Macromolecular Structure Of Pyrolysis Products From A Colorado Green River Oil Shale, James L. Hillier, Thomas H. Fletcher, Mark S. Solum, Ronald J. Pugmire Jan 2013

Characterization Of Macromolecular Structure Of Pyrolysis Products From A Colorado Green River Oil Shale, James L. Hillier, Thomas H. Fletcher, Mark S. Solum, Ronald J. Pugmire

Faculty Publications

Volatile products from an oil shale from the Colorado Green River formation were studied by several methods. The oil shale was demineralized, and the resulting kerogen was also chemically analyzed. Both the oil shale and the demineralized kerogen were pyrolyzed at 10 K/min, and the pyrolysis products (light gas, tar, and char) were analyzed using 13C NMR, XPS, GC/MS, and FTIR. Low temperature ashing was performed in order to compare pyrolysis yields of oil shale and demineralized kerogen on a dry ash-free basis. Volatile yields of approximately 75% were achieved in an oil shale retort and 79% in the kerogen …

Go to article

Prediction Of Sawdust Pyrolysis Yields From A Flat-Flame Burner Using The Cpd Model, Aaron D. Lewis, Thomas H. Fletcher Jan 2013

Prediction Of Sawdust Pyrolysis Yields From A Flat-Flame Burner Using The Cpd Model, Aaron D. Lewis, Thomas H. Fletcher

Faculty Publications

High heating rate pyrolysis experiments were performed on a softwood sawdust in a flat-flame burner reactor at temperatures from 1163 to 1433 K with particle residence times ranging from 23 to 102 ms at atmospheric pressure. Volatile yields of the 45−75 μm sawdust were measured and are believed to be similar to those that would occur in an industrial entrained-flow combustor or gasifier. A refractory tar yield near 1.5 wt % (dry, ash-free) was measured. A high percentage of the fully pyrolyzed sawdust char was spherical, having lost the original sawdust structure. It is suggested that the morphology of sawdust …

Go to article

Final Report: Multipath Modeling And Mitigation Using Multiple Antennas (M4a), Michael Rice Jan 2013

Final Report: Multipath Modeling And Mitigation Using Multiple Antennas (M4a), Michael Rice

Faculty Publications

This report documents the effort under contract W900KK-09-C-0016. The contract comprised four phases spanning 15 April 2009 to 1 December 2012. The relationship between the effort associated with each phase and the contents of this report are as follows: Phase 1 was devoted exclusively to the channel sounding experiments with the UH-1H helicopter. The experimental setup, procedure, and results for the channel sounding experiments at Cairns Army Airfield and Patuxent River are described in Chapter 2. Good, usable data at upper L-band was captured during the Cairns Army Airfield experiments. Phase 2 was devoted to the channel sounding experiments with …

Go to article

An Intuitive Design Pattern For Sequentially Estimating Parameters Of A 2k Factorial Experiment With Active Confounding Avoidance And Least Treatment Combinations, H.-S. Jacob Tsao, Minnie Patel Jan 2013

An Intuitive Design Pattern For Sequentially Estimating Parameters Of A 2k Factorial Experiment With Active Confounding Avoidance And Least Treatment Combinations, H.-S. Jacob Tsao, Minnie Patel

Faculty Publications

2k Full factorial designs may be prohibitively expensive when the number of factors k is large. The most popular technique developed to reduce the number of treatment combinations is the fractional factorial design; confounding in estimating the model parameters naturally results in various resolution and aberration levels. While very useful, these resolution levels may not satisfy experimenters’ requirements for estimatibility and cost reduction. For example, while Resolution V ensures a common requirement that no two-factor interactions are confounded, it also imposes an often undesired restriction that a main effect cannot be confounded with a three-factor interaction, which may very well …

Go to article

Solid-Fuel Regression Rate Modeling For Hybrid Rockets, Francesca Favaro, W. Sirignano, M. Manzoni, L. Deluca Jan 2013

Solid-Fuel Regression Rate Modeling For Hybrid Rockets, Francesca Favaro, W. Sirignano, M. Manzoni, L. Deluca

Faculty Publications

The regression rate of the solid fuel is a primary parameter in the performance analysis for a hybrid rocket. Many studies in the past few years have theoretically claimed, or experimentally shown, a dependence of the regression rate on the chamber total pressure. Such behavior is generally traced back to the presence of oxygen below the flame zone and of heterogeneous reactions occurring at the surface and affecting the pyrolysis law. An experimental program was performed at the Space Propulsion Laboratory of the Politecnico di Milano showing, within the explored operating conditions and the associated uncertainty bands, a neutral trend …

Go to article

Mechanical Properties Of Human Amniotic Fluid Stem Cells Using Nanoindentation, Ashkan Aryaei, Ambalangodage Jayasuriya Jan 2013

Mechanical Properties Of Human Amniotic Fluid Stem Cells Using Nanoindentation, Ashkan Aryaei, Ambalangodage Jayasuriya

Faculty Publications

The aim of this study was to obtain nanomechanical properties of living cells focusing on human amniotic fluid stem (hAFS) cell using nanoindentation techniques. We modified the conventional method of atomic force microscopy (AFM) in aqueous environment for cell imaging and indentation to avoid inherent difficulties. Moreover, we determined the elastic modulus of murine osteoblast (OB6) cells and hAFS cells at the nucleus and cytoskeleton using force–displacement curves and Hertz theory. Since OB6 cell line has been widely used, it was selected to validate and compare the obtained results with the previous research studies. As a result, we were able …

Go to article

Querie: Collaborative Database Exploration, Magdalini Eirinaki, S. Abraham, N. Polyzotis, N. Shaikh Jan 2013

Querie: Collaborative Database Exploration, Magdalini Eirinaki, S. Abraham, N. Polyzotis, N. Shaikh

Faculty Publications

Interactive database exploration is a key task in information mining. However, users who lack SQL expertise or familiarity with the database schema face great difficulties in performing this task. To aid these users, we developed the QueRIE system for personalized query recommendations. QueRIE continuously monitors the user’s querying behavior and finds matching patterns in the system’s query log, in an attempt to identify previous users with similar information needs. Subsequently, QueRIE uses these “similar” users and their queries to recommend queries that the current user may find interesting. In this work we describe an instantiation of the QueRIE framework, where …

Go to article

Use Of Comsol Simulation For Undergraduate Fluid Dynamics Course, Hyun J. Kwon Jan 2013

Use Of Comsol Simulation For Undergraduate Fluid Dynamics Course, Hyun J. Kwon

Faculty Publications

The COMSOL software was used to introduce CFD and teach fluid dynamics more effectively. Introduction of CFD has become an important part of fluid dynamics in recent years; however, undergraduate students have less access to practical exposure to it, unless they take additional elective courses which are seldom offered in undergrad predominant institutes. Simulation has become an essential step in designing and optimizing process in many engineering problems. Therefore, the COMSOL simulation project was assigned to undergraduate CFD as a part of their term project to enhance their exposure to simulation software and help understanding the use of simulation on …

Go to article

Electrochemical Explanation For Asymmetric Electrowetting Response, Mehdi Khodayari, Nathan B. Crane, Alex A. Volinsky Jan 2013

Electrochemical Explanation For Asymmetric Electrowetting Response, Mehdi Khodayari, Nathan B. Crane, Alex A. Volinsky

Faculty Publications

In electrowetting, a droplet/substrate contact angle is modulated by applying a potential difference between the droplet and the substrate. Typically, the droplet potential is changed via an auxiliary electrode dipped in the droplet. Here, it is shown that electrochemical reactions lead to a potential drop on the auxiliary electrode in electrowetting, which degrades the droplet contact angle modulation. The magnitude of this effect depends on the voltage polarity. This problem can be addressed by using a dielectric layer, such as SiO2, which can prevent electrochemical reactions with the electrowetting substrate and the auxiliary electrode.

Go to article

Coal Char-Co2 Gasification Measurements And Modeling In A Pressurized Flat-Flame Burner, Randy C. Shurtz, Thomas H. Fletcher Jan 2013

Coal Char-Co2 Gasification Measurements And Modeling In A Pressurized Flat-Flame Burner, Randy C. Shurtz, Thomas H. Fletcher

Faculty Publications

A pressurized flat-flame burner (PFFB) was used to conduct coal gasification studies. The PFFB was designed to provide an environment with laminar, dispersed entrained flow, with particle heating rates of ∼105 K/s, pressures of up to 15 atm, and gas temperatures of up to 2000 K. Residence times were varied from 30 to 700 ms in this study. Char gasification studies by CO2 were conducted on a subbituminous coal and 4 bituminous coals in the PFFB. Pressures of 5, 10, and 15 atm were used with gas compositions of 20, 40, and 90 mol % CO2. Gas conditions with peak …

Go to article

Time-Dependent Deposition Characteristics Of Fine Coal Fly Ash In A Laboratory Gas Turbine Environment, Robert Laycock, Thomas H. Fletcher Jan 2013

Time-Dependent Deposition Characteristics Of Fine Coal Fly Ash In A Laboratory Gas Turbine Environment, Robert Laycock, Thomas H. Fletcher

Faculty Publications

Time-dependent deposition characteristics of fine coal fly ash were measured in the Turbine Accelerated Deposition Facility (TADF) at Brigham Young University. Two samples of subbituminous coal fly ash, with mass mean diameters of 3 and 13 microns, were entrained in a hot gas flow with a gas temperature of 1288 C and Mach number of 0.25. A nickel-based, superalloy metal coupon approximately 0.3 cm thick was held in a hot particle-laden gas stream to simulate deposition in a gas turbine. Tests were conducted with deposition times of 20, 40, and 60 min. Capture efficiencies and surface roughness characteristics (e.g., Ra) …

Go to article

Techno- Economic Analysis Of Wastewater Biosolids Gasification, Jason M. Porter, Nick Lumley, Robert Braun, Tzahi Cath, Ana Prietro, Dotti Ramey, Greta Buschmann Jan 2013

Techno- Economic Analysis Of Wastewater Biosolids Gasification, Jason M. Porter, Nick Lumley, Robert Braun, Tzahi Cath, Ana Prietro, Dotti Ramey, Greta Buschmann

Faculty Publications

Wastewater treatment biosolids, commonly referred to as sludge, is a dilute suspension of micro-organisms, noxious organic matter, and mineral species in up to 99% water. Sludge is produced at about 250 mg/L of mixed municipal and light industrial wastewater treated. Management of this process stream can present a financial and environmental challenge for wastewater treatment plants (WWTPs), accounting for up to 15% of plant energy consumption. Operators of small urban WWTPs see the greatest challenge as their operations do not benefit from economies of scale, which permit larger facilities to absorb the costs or footprint of anaerobic digestion. This work …

Go to article

Supercritical Co2 Brayton Cycles For Solar-Thermal Energy, Brian D. Iverson, Thomas M. Conboy, James J. Pasch, Alan M. Kruizenga Jan 2013

Supercritical Co2 Brayton Cycles For Solar-Thermal Energy, Brian D. Iverson, Thomas M. Conboy, James J. Pasch, Alan M. Kruizenga

Faculty Publications

Of the mechanisms to improve efficiency for solar-­‐thermal power plants, one of the most effective ways to improve overall efficiency is through power cycle improvements. As increases in operating temperature continue to be pursued, supercritical CO2 Brayton cycles begin to look more attractive despite the development costs of this technology. Further, supercritical CO2 Brayton has application in many areas of power generation beyond that for solar energy alone.

One challenge particular to solar-­‐thermal power generation is the transient nature of the solar resource. This work illustrates the behavior of developmental Brayton turbomachinery in response to a fluctuating thermal input, much …

Go to article

A Smartphone Design Approach To User Communication Interface For Administering Storage System Network, Weider Yu, Xiao Su, Jason Hansen Dec 2012

A Smartphone Design Approach To User Communication Interface For Administering Storage System Network, Weider Yu, Xiao Su, Jason Hansen

Faculty Publications

This paper investigates the feasibility and potential of using a mobile smartphone as a user administration control for storage system network. It includes the design and implementation of a mobile smartphone software system that can be used to perform system administration activities on the storage system without the need of using a laptop or desktop system. In the paper the design of some effective metaphors to present the storage system on the limited display area of a mobile smartphone device and the set of system features chosen for implementation are presented. Current storage system administration is limited to using storage …

Go to article

High Performance Low Temperature Solid Oxide Fuel Cells With Novel Electrode Architecture, Yu Chen, Qian Liu, Zhibin Yang, Fanglin Chen, Minfang Han Dec 2012

High Performance Low Temperature Solid Oxide Fuel Cells With Novel Electrode Architecture, Yu Chen, Qian Liu, Zhibin Yang, Fanglin Chen, Minfang Han

Faculty Publications

In this study, we have fabricated high performance low temperature solid oxide fuel cells (LT-SOFCs) with both acicular anodes and cathodes with thin Gd-doped ceria (GDC) electrolyte film. The acicular Ni-Gd0.1Ce0.9O2−δ (Ni-GDC) anode was prepared using freeze drying tape casting, while the hierarchically porous cathode with nano-size Sm0.5Sr0.5CoO3 (SSC) particles covering an acicular GDC skeleton was prepared by a combination of freeze drying tape casting and self-rising approaches. The acicular electrodes with 5–200 μm pores/channels enhance mass transport, while SSC particles of about 50 nm in the cathode promote …

Go to article

Computational Identification Of Adaptive Mutants Using The Vert System, James Winkler, Katy Kao Dec 2012

Computational Identification Of Adaptive Mutants Using The Vert System, James Winkler, Katy Kao

Faculty Publications

BackgroundEvolutionary dynamics of microbial organisms can now be visualized using the Visualizing Evolution in Real Time (VERT) system, in which several isogenic strains expressing different fluorescent proteins compete during adaptive evolution and are tracked using fluorescent cell sorting to construct a population history over time. Mutations conferring enhanced growth rates can be detected by observing changes in the fluorescent population proportions.ResultsUsing data obtained from several VERT experiments, we construct a hidden Markov-derived model to detect these adaptive events in VERT experiments without external intervention beyond initial training. Analysis of annotated data revealed that the model achieves consensus with human annotation …

Go to article

Soil Erosion And Surface Water Quality Impacts Of Natural Gas Development In East Texas, Usa, Matthew W. Mcbroom, Todd Thomas, Yanli Zhang Dec 2012

Soil Erosion And Surface Water Quality Impacts Of Natural Gas Development In East Texas, Usa, Matthew W. Mcbroom, Todd Thomas, Yanli Zhang

Faculty Publications

Due to greater demands for hydrocarbons and improvements in drilling technology, development of oil and natural gas in some regions of the United States has increased dramatically. A 1.4 ha natural gas well pad was constructed in an intermittent stream channel at the Alto Experimental Watersheds in East Texas, USA (F1), while another 1.1 ha well pad was offset about 15 m from a nearby intermittent stream (F2). V-notch weirs were constructed downstream of these well pads and stream sedimentation and water quality was measured. For the 2009 water year, about 11.76 cm, or almost 222% more runoff resulted from …

Go to article

De-Embedding In High Speed Design, Don Degroot, David Dunham Dec 2012

De-Embedding In High Speed Design, Don Degroot, David Dunham

Faculty Publications

No abstract provided.

Go to article

Empirically Bounding Of Space Booms With Tape Spring Hinges, Alan L. Jennings, Jonathan T. Black, Chris Allen Nov 2012

Empirically Bounding Of Space Booms With Tape Spring Hinges, Alan L. Jennings, Jonathan T. Black, Chris Allen

Faculty Publications

Self-deploying structures seek to provide a compact launch package for large, lightweight satellite booms. One self-deploying method is a foldable tape spring. This paper examines the large scale behavior of a boom attached by a tape spring hinge during mock deployments. A boom attached by tape spring to a rigid stand was released and the boom bounced up to 60° before coming to rest (as opposed to snap-through behavior). These large amplitude bounces can cause the boom to collide with sensors, other booms or arrays causing damage or preventing full deployment. Results show the first bounce of deployment is nearly …

Go to article

Complex Of Myoglobin With Phenol Bound In A Proximal Cavity, Xiao Huang, Chunxue Wang, Lesa R. Celeste, Leslie L. Lovelace, Shengfang Sun, John H. Dawson, Lukasz Lebioda Nov 2012

Complex Of Myoglobin With Phenol Bound In A Proximal Cavity, Xiao Huang, Chunxue Wang, Lesa R. Celeste, Leslie L. Lovelace, Shengfang Sun, John H. Dawson, Lukasz Lebioda

Faculty Publications

Sperm whale myoglobin (Mb) has weak dehaloperoxidase activity and catalyzes the peroxidative dehalogenation of 2,4,6-trichlorophenol (TCP) to 2,6-dichloroquinone. Crystals of Mb and of its more active G65T variant were used to study the binding of TCP, 4-iodophenol (4-IP) and phenol. The structures of crystals soaked overnight in a 10 mM solution of phenol revealed that a phenol molecule binds in the proximal cavity, forming a hydrogen bond to the hydroxyl of Tyr146 and hydrophobic contacts which include interactions with C and C of the proximal histidine His93. The phenol position corresponds to the strongest xenon binding site, Xe1. It …

Go to article

Reactive Rayleigh–Taylor Turbulent Mixing: A One-Dimensional-Turbulence Study, E.D. Gonzalez-Juez, A.R. Kerstein, D.O. Lignell Nov 2012

Reactive Rayleigh–Taylor Turbulent Mixing: A One-Dimensional-Turbulence Study, E.D. Gonzalez-Juez, A.R. Kerstein, D.O. Lignell

Faculty Publications

We study the problem of reactive Rayleigh–Taylor turbulence in the Boussinesq framework using one-dimensional-turbulence (ODT) simulations. In this problem a reaction zone between overlying heavy/cold reactants and underlying light/hot products moves against gravity. First, we show that ODT results for global quantities in non-reactive Rayleigh–Taylor turbulence are within those from direct numerical simulations (DNS). This comparison give us confidence in using ODT to study unexplored flow regimes in the reactive case. Then, we show how ODT predicts an early stage of reactive Rayleigh–Taylor turbulence that behaves similarly to the non-reactive case, as observed in previous DNS. More importantly, ODT indicates …

Go to article

Fib/Sem-Based Calculation Of Tortuosity In A Porous Licoo2 Cathode For A Li-Ion Battery, T. Hutzenlaub, A. Asthana, J. Becker, D. R. Wheeler, R. Zengerle, S. Thiele Nov 2012

Fib/Sem-Based Calculation Of Tortuosity In A Porous Licoo2 Cathode For A Li-Ion Battery, T. Hutzenlaub, A. Asthana, J. Becker, D. R. Wheeler, R. Zengerle, S. Thiele

Faculty Publications

We present a new method to quantify tortuosity in the porous, LiCoO2 cathode of a Li-ion battery. The starting point is a previously published 3D reconstruction from FIB/SEM images with three phases, the active material domain, carbon-binder domain and pore space. Based on this geometrical configuration, we compute effective diffusivities, from which we in turn derive tortuosity values for the pore space ranging between 5 and 11.6 for the three spatial directions. In a next step, we compare our approach to an imaging method that employs back-filling material. These methods do not differentiate between the carbon-binder domain and the pore …

Go to article

Beyond Gel Electrophoresis: Microfluidic Separations, Fluorescence Burst Analysis, And Dna Stretching, Kevin D. Dorfman, Scott B. King, Daniel W. Olson, Joel D. P. Thomas, Douglas R. Tree Nov 2012

Beyond Gel Electrophoresis: Microfluidic Separations, Fluorescence Burst Analysis, And Dna Stretching, Kevin D. Dorfman, Scott B. King, Daniel W. Olson, Joel D. P. Thomas, Douglas R. Tree

Faculty Publications

This review addresses methods for obtaining sequence information directly from unamplified genomic length DNA. Our generic starting point is a large piece of DNA that contains many thousands of base pairs (kilobase pairs, kbp) or even millions of base pairs (megabase pairs, Mbp). We would like to determine the genomic distance between two repeats of a given sequence, indicated by the red dots on the coiled DNA molecule in Figure 1. Let us consider the case where these sequences are restriction sites, which can be selectively cut using proteins known as restriction enzymes. For decades, gel electrophoresis served as the …

Go to article

Can Silver Be A Reliable Current Collector For Electrochemical Tests?, Yunhui Gong, Changyong Qin, Kevin Huang Nov 2012

Can Silver Be A Reliable Current Collector For Electrochemical Tests?, Yunhui Gong, Changyong Qin, Kevin Huang

Faculty Publications

The true functionality of a current collector employed in electrochemical cells is to ensure a low- resistance steady electrons flow between the cell and instrumentation without involving in any local electrochemical reactions of the electrode. In this study, we investigated the effect of curing temperature of a common current collector, silver, on the polarization area specific resistance (ASR) of a cathode. The results explicitly showed that at least one order of magnitude lower ASR for a cathode with Ag cured at 800°C than that cured at 650°C of the same cathode configuration. Microscopic analysis of the 800°C-cured cells revealed a …

Go to article

First Prev Next Last