Engineering Commons^™

Side-To-Side Comparison Of Total Shoulder Arthroplasty And Intact Function In Individuals, Sarah Rose Walden

Electronic Theses and Dissertations

Total Shoulder Arthroplasty (TSA) is a surgery which replaces the shoulder joint, or the interface between the humerus and the scapula glenoid. To test TSA success, most prior research compares patients with TSA to healthy controls. However, the shoulder anthropometry, motion, and musculature of individuals varies widely across the population making it important to assess TSA performance in individuals. The overall goal of this study is to determine if patients with one of two TSA implant designs on one side achieve the same range of motion as their intact side, and if so to find if they compensate using increased …

Characterization Of Rare-Earth Doped Thermal Barrier Coatings For Phosphor Thermometry, Quentin Fouliard

Electronic Theses and Dissertations

Thermal Barrier Coatings have been extensively used to protect and insulate the metallic components in turbine engines from extreme environments to achieve higher turbine inlet temperatures, resulting in an increase in combined engine cycle efficiency, lowering NOx emissions and fuel consumption. Additionally, as the major failure mechanisms determining lifetime are thermally activated during engine operation, uncertainty in temperature measurements affects lifetime prediction. Early detection of Thermal Barrier Coatings spallation symptoms, associated with local delamination induced temperature changes, can reduce forced engine outages. Further improvements are envisioned with the development of more reliable measurement techniques. For this purpose, Phosphor Thermometry has …

Controlled Bubble Dynamics Inside Micropillar Arrays, Faraz Khalil Arya

Electronic Theses and Dissertations

Bubble dynamics inside micro domains was manipulated and used to pump liquid. Micropillars were formed inside two 1.5 mm wide and 220 µm high microchannels with a length of 23 mm. One microchannel had three arrays of micropillars with diameters of 40 µm and the other had a single array of micropillars with diameters of 30 µm. An array of five 200 µm by 200 µm heaters was deposited inside these micropillar arrays and was used to control bubble size and trajectory. A sequential power switching of the heaters was used to pump liquid in a desired direction with a …

Stochastic Optimization And Applications With Endogenous Uncertainties Via Discrete Choice Models, Mengnan Chen

Electronic Theses and Dissertations

Stochastic optimization is an optimization method that solves stochastic problems for minimizing or maximizing an objective function when there is randomness in the optimization process. In this dissertation, various stochastic optimization problems from the areas of Manufacturing, Health care, and Information Cascade are investigated in networks systems. These stochastic optimization problems aim to make plan for using existing resources to improve production efficiency, customer satisfaction, and information influence within limitation. Since the strategies are made for future planning, there are environmental uncertainties in the network systems. Sometimes, the environment may be changed due to the action of the decision maker. …

Guided Autonomy For Quadcopter Photography, Saif Alabachi

Electronic Theses and Dissertations

Photographing small objects with a quadcopter is non-trivial to perform with many common user interfaces, especially when it requires maneuvering an Unmanned Aerial Vehicle (C) to difficult angles in order to shoot high perspectives. The aim of this research is to employ machine learning to support better user interfaces for quadcopter photography. Human Robot Interaction (HRI) is supported by visual servoing, a specialized vision system for real-time object detection, and control policies acquired through reinforcement learning (RL). Two investigations of guided autonomy were conducted. In the first, the user directed the quadcopter with a sketch based interface, and periods of …

A Kinetic Monte Carlo Study Of Mesoscopic Perovskite Solar Cell Performance Behavior, Behzad Bahrami

Electronic Theses and Dissertations

Perovskite solar cells have received considerable attention in recent years due to their low processing cost and high energy conversion efficiency. However, the mechanisms of perovskite solar cell performance are not fully understood. Models based on probabilistic and statistical approaches can be used to simulate, optimize, and predict perovskite solar cell photovoltaic performance, and they can also guide experimental processing and fabrication conditions to achieve higher photovoltaic efficiency. This work developed a 3D model based on the kinetic Monte Carlo (KMC) approach to simulate 3D morphology of perovskite-based solar cells and predict their photovoltaic performance. The model incorporated the physical …

Static Load Bolted Joint Elastic Resilience Testing Methodology, Paul Melino

Electronic Theses and Dissertations

Elastic resilience is the ratio of deformation over force an object experiences when under stress. Knowing the how much the bolt and clamped part deform under load is critical when determining fasteners for a bolted joint. VDI 2230 is the internationally recognized bolt sizing standard and contains the equations used to determine each of the bolted joint component’s resilience as well as values for embedment estimates based on component surface roughness. Embedment is the local plastic deformation due to uneven contact over the contact planes of a bolt-clamped interface (Bolt head to plate, plate to plate, plate to nut, and …

Variability Of E. Coli In Streambed Sediments And Its Implication For Water Quality, Sadia Salam

Electronic Theses and Dissertations

Fecal indicator bacteria (FIB), including E. coli, are the number one cause of water quality impairments in the United States according to the USEPA. FIB are used as a predictor to identify the possible presence of pathogens in waterbodies. E. coli is a useful indicator of gastrointestinal (GI) related illnesses from contact with fresh water. While surface water is routinely monitored for water quality, streambed sediments are rarely considered as a source of FIB to the overlying water column. This study focuses on understanding the variation of E. coli concentrations in streambed sediments and the potential impact of sediment sources …

Non-Hermitian And Space-Time Mode Management, Nicholas Nye

Electronic Theses and Dissertations

In the last few years, optics has witnessed the emergence of two fields namely metasurfaces and parity-time (PT) symmetry. Optical metasurfaces are engineered structures that provide unique responses to electromagnetic waves, absent in natural materials. On the other hand, PT symmetry has emerged from quantum mechanics, when a new class of non-Hermitian Hamiltonian quantum systems was shown to have real eigenvalues. In this work, we demonstrate how PT-symmetric diffractive structures are capable of eliminating diffraction orders in specific directions, while maintaining/enhancing the remaining orders. In the second part of this work, we emphasize on supersymmetry (SUSY) and its applications in …

Computational Imaging Systems For High-Speed, Adaptive Sensing Applications, Yangyang Sun

Electronic Theses and Dissertations

Driven by the advances in signal processing and ubiquitous availability of high-speed low-cost computing resources over the past decade, computational imaging has seen the growing interest. Improvements on spatial, temporal, and spectral resolutions have been made with novel designs of imaging systems and optimization methods. However, there are two limitations in computational imaging. 1), Computational imaging requires full knowledge and representation of the imaging system called the forward model to reconstruct the object of interest. This limits the applications in the systems with a parameterized unknown forward model such as range imaging systems. 2), the regularization in the optimization process …

Cryogenic Performance Projections For Ultra-Small Oxide-Free Vertical-Cavity Surface-Emitting Lasers, Mina Bayat

Electronic Theses and Dissertations

Small-sized vertical-cavity surface-emitting laser (VCSEL) may offer very low power consumption along with high reliability for cryogenic data transfer. Cryogenic data transfer has application in supercomputers and superconducting for efficient computing and also focal plane array cameras operating at 77 K, and at the lower temperature of 4 K for data extraction from superconducting circuits. A theoretical analysis is presented for 77 K and 4 K operation based on small cavity, oxide-free VCSEL sizes of 2 to 6 µm, that have been shown to operate efficiently at room temperature. Temperature dependent operation for optimally-designed VCSELs are studied by calculating the …

Design And Fabrication Of Scalable Multifunctional Multimaterial Fibers And Textiles, Felix Tan

Electronic Theses and Dissertations

Multimaterial fibers eschew the traditional mono-material structures typical of traditional optical fibers for novel internal architectures that combine disparate materials with distinct optical, mechanical, and electronic properties, thereby enabling novel optoelectronic functionalities delivered in the form factor of an extended fiber. This new class of fibers developed over the past two decades is attracting interest from researchers in such different fields as optics, textiles, and biomedicine. The juxtaposition of multiple materials integrated at micro- and nanoscales in complex geometries while ensuring intimate smooth interfaces extending continuously for kilometers facilitates unique applications such as non-invasive laser surgery, self-monitoring fibers, e-textiles, and …

Stable, Highly Luminescent Perovskite-Polymer Composites For Photonics Applications, Juan He

Electronic Theses and Dissertations

Metal halide perovskites (simplified as perovskites as below), particularly those in nanocrystal forms, have recently emerged as highly efficient, bandgap tunable photonics materials that can be easily solution processed at low cost for display, lighting or other energy conversion applications. However, the quick degradation of perovskite nanocrystals under external stresses or upon colloidal aggregations has been a major challenge for most applications where high reliability is normally required. In this thesis, we have explored a polymer swelling-deswelling microencapsulation (SDM) process that enables the dispersion, in-situ crystallization and subsequent surface passivation of perovskite nanocrystals in polymer matrices, and leads to ultrastable …

Computational Imaging With Limited Photon Budget, Zheyuan Zhu

Electronic Theses and Dissertations

The capability of retrieving the image/signal of interest from extremely low photon flux is attractive in scientific, industrial, and medical imaging applications. Conventional imaging modalities and reconstruction algorithms rely on hundreds to thousands of photons per pixel (or per measurement) to ensure enough signal-to-noise (SNR) ratio for extracting the image/signal of interest. Unfortunately, the potential of radiation or photon damage prohibits high SNR measurements in dose-sensitive diagnosis scenarios. In addition, imaging systems utilizing inherently weak signals as contrast mechanism, such as X-ray scattering-based tomography, or attosecond pulse retrieval from the streaking trace, entail prolonged integration time to acquire hundreds of …

Optical Sensing Of Structural Dynamics In Complex Media, Jose Rafael Guzman Sepulveda

Electronic Theses and Dissertations

Quantifying the structural dynamics of complex media is challenging because of the multiple temporal and spatial scales involved. Thanks to the ability to retrieve collective dynamics noninvasively, light scattering-based approaches are often the methods of choice. This dissertation discusses specific features of dynamic light scattering that utilizes spatio-temporal coherence gating. It is demonstrated that this optical fiber-based approach can operate over a large range of optical regimes and it has a number of unique capabilities such as an effective isolation of single scattering, a large sensitivity, and a high collection efficiency. Moreover, the approach also provides means for proper ensemble …

Hybrid Integration Of Second- And Third-Order Highly Nonlinear Waveguides On Silicon Substrates, Guillermo Fernando Camacho Gonzalez

Electronic Theses and Dissertations

In order to extend the capabilities and applications of silicon photonics, other materials and compatible technologies have been developed and integrated on silicon substrates. A particular class of integrable materials are those with high second- and third-order nonlinear optical properties. This work presents contributions made to nonlinear integrated photonics on silicon substrates, including chalcogenide waveguides for over an octave supercontinuum generation, and rib-loaded thin-film lithium niobate waveguides for highly efficient second-harmonic generation. Through the pursuit of hybrid integration of the two types of waveguides for applications such as on-chip self-referenced optical frequency combs, we have experimentally demonstrated fabrication integrability of …

Holographic Optical Elements For Visible Light Applications In Photo-Thermo-Refractive Glass, Fedor Kompan

Electronic Theses and Dissertations

This dissertation reports on design and fabrication of various optical elements in Photo-thermo-refractive (PTR) glass. An ability to produce complex holographic optical elements (HOEs) for the visible spectral region appears very beneficial for variety of applications, however, it is limited due to photosensitivity of the glass confined within the UV region. First two parts of this dissertation present two independent approaches to the problem of holographic recording using visible radiation. The first method involves modification of the original PTR glass rendering it photosensitive to radiation in the visible spectral region and, thus, making possible the recording of holograms in PTR …

Third-Order Optical Nonlinearities For Integrated Microwave Photonics Applications, Marcin Malinowski

Electronic Theses and Dissertations

The field of integrated photonics aims at compressing large and environmentally-sensitive optical systems to micron-sized circuits that can be mass-produced through existing semiconductor fabrication facilities. The integration of optical components on single chips is pivotal to the realization of miniature systems with high degree of complexity. Such novel photonic chips find abundant applications in optical communication, spectroscopy and signal processing. This work concentrates on harnessing nonlinear phenomena to this avail. The first part of this dissertation discusses, both from component and system level, the development of a frequency comb source with a semiconductor mode-locked laser at its heart. New nonlinear …

Highly Efficient Gan-Based Single-Phase Transformer-Less Pv Grid-Tied Inverter, Khaled Alatawi

Electronic Theses and Dissertations

Growing energy demand and environmental concerns have led to an increased interest in renewable energy resources to provide a sustainable and low carbon emission energy supply. Among these renewable energy resources, photovoltaic (PV) systems have been the focus of many scientific researchers. The most vital component of a PV system that needs to be improved is the power converter. Grid-tied transformer-less inverters have gained a lot of interest in recent years because of their higher efficiency, reduced volume and lower cost compared to traditional line transformer inverters.

This dissertation discusses single-phase transformer-less inverter challenges and provides solutions that could lead …

Process-Property-Microstructure Relationships In Laser-Powder Bed Fusion Of 420 Stainless Steel., Subrata Deb Nath

Electronic Theses and Dissertations

Laser-powder bed fusion (L-PBF) is an additive manufacturing technique for fabricating metal components with complex design and customized features. However, only a limited number of materials have been widely studied using L-PBF. AISI 420 stainless steel, an alloy with a useful combination of high strength, hardness, and corrosion resistance, is an example of one such material where few L-PBF investigations have emerged to date. In this dissertation, L-PBF experiments were conducted using 420 stainless steel powders to understand the effects of chemical composition, particle size distribution and processing parameters on ensuing physical, mechanical and corrosion properties and microstructure in comparison …

Characterization Of Microreactor And Analysis Of Carbonyl Compounds In Exhaled Breath., Qi Li

Electronic Theses and Dissertations

Analysis of trace volatile organic compounds at parts per billion (ppbv) to parts per trillion (pptv) level has become an important research frontier because of the applicability for environmental monitoring and noninvasive diagnosis of diseases. The methods of preconcentration for detection of trace aldehydes and ketones both in ambient air and human exhaled breath have increased considerably over the last decade. However, the majority of these methods are not efficient. In this dissertation, we have improved an innovative microreactor that is suitable for quantitative analysis of volatile carbonyl compounds (VOCs) in ambient air as well as in human exhaled breath. …

Exploration Of Radiation Damage Mechanism In Mems Devices., Pranoy Deb Shuvra

Electronic Theses and Dissertations

We explored UV, X-ray and proton radiation damage mechanisms in MEMS resonators. T-shaped MEMS resonators of different dimensions were used to investigate the effect of radiation. Radiation damage is observed in the form of resistance and resonance frequency shift of the device. The resistance change indicates a change in free carrier concentration and mobility, while the resonance frequency change indicates a change in mass and/or elastic constant. For 255nm UV radiation, we observed a persistent photoconductivity that lasts for about 60 hours after radiation is turned off. The resonance frequency also decreases 40-90 ppm during irradiation and slowly recovers at …

Landmine Detection Using Semi-Supervised Learning., Graham Reid

Electronic Theses and Dissertations

Landmine detection is imperative for the preservation of both military and civilian lives. While landmines are easy to place, they are relatively difficult to remove. The classic method of detecting landmines was by using metal-detectors. However, many present-day landmines are composed of little to no metal, necessitating the use of additional technologies. One of the most successful and widely employed technologies is Ground Penetrating Radar (GPR). In order to maximize efficiency of GPR-based landmine detection and minimize wasted effort caused by false alarms, intelligent detection methods such as machine learning are used. Many sophisticated algorithms are developed and employed to …

Low Temperature Desiccants In Atmospheric Water Generation., Sunil Gupta

Electronic Theses and Dissertations

Surging global water demand as well as changes to weather patterns and over exploitation of natural water sources, such as ground water, has made potable water a critical resource in many parts of the World already – one rapidly heading towards a crisis situation. Desalination has been adopted as a solution – this is however energy intensive and impractical for most of the developing countries - those most in need of water. A renewable source of energy is solar thermal and solar photovoltaic. A plentiful source of water is the humidity in the atmosphere. This research is to push the …

Modeling And Simulation Methodologies For Spinal Cord Stimulation., Saliya Kumara Kirigeeganage

Electronic Theses and Dissertations

The use of neural prostheses to improve health of paraplegics has been a prime interest of neuroscientists over the last few decades. Scientists have performed experiments with spinal cord stimulation (SCS) to enable voluntary motor function of paralyzed patients. However, the experimentation on the human spinal cord is not a trivial task. Therefore, modeling and simulation techniques play a significant role in understanding the underlying concepts and mechanics of the spinal cord stimulation. In this work, simulation and modeling techniques related to spinal cord stimulation were investigated. The initial work was intended to visualize the electric field distribution patterns in …

A Transfer Learning Approach For Sentiment Classification., Omar Abdelwahab

Electronic Theses and Dissertations

The idea of developing machine learning systems or Artificial Intelligence agents that would learn from different tasks and be able to accumulate that knowledge with time so that it functions successfully on a new task that it has not seen before is an idea and a research area that is still being explored. In this work, we will lay out an algorithm that allows a machine learning system or an AI agent to learn from k different domains then uses some or no data from the new task for the system to perform strongly on that new task. In order …

Ice Adhesion Analysis Of Severely Aged Pdms Rubbers, Theodore R. Woll

Electronic Theses and Dissertations

The goal of this study was to evaluate and optimize the ice adhesion test initially developed by the University of Denver and to examine Polydimethylsiloxane (PDMS) based silicone rubbers for their ice-phobicity as a function of their physical and chemistry properties, and under severe oxidative aging. The test is based on an ice block bonded to a silicone rubber substrate and subjected to shear. In its original state, the test had severe limitations that caused the ice to be dislodged through a mixture of shear and peeling. Several steps were taken in this research to improve the test, and the …

Nanoengineering Of Next Generation Silicone Rubber Materials For Extreme Applications, Monika Bleszynski

Electronic Theses and Dissertations

Silicone rubber materials are frequently used in extreme environments, including aviation, space, high voltage and other applications. In service, however, complex and difficult to predict damage mechanisms in the rubbers can occur which can lead to severe failures of essential infrastructural components. For example, Non-Ceramic Insulators (NCIs), which support some of the most critical high voltage lines in the world, regularly exhibit severe polymer aging due to environmental pollution, ultra-violet (UV) radiation, and dry band and corona arcing. Designing silicone rubbers to resist aging in these demanding environments is difficult and requires an interdisciplinary approach, including correctly assessing the actual …

Thermodynamic Modeling And Transient Simulation Of A Low-Pressure Heat Recovery Steam Generator Using Siemens T3000, Andres Caesar

Electronic Theses and Dissertations

With world energy consumption rising, and nonrenewable energy resources quickly depleting, it is essential to design more efficient power plants and thereby economically utilize fossil fuels. To that end, this work focuses on the thermodynamic modeling of steam power systems to enhance our understanding of their dynamic and transient behavior. This thesis discusses the physical phenomena behind a heat recovery steam generator (HRSG) and develops a mathematical description of its system dynamics. The model is developed from fundamentals of fluid dynamics, phase change, heat transfer, conservation laws and unsteady flow energy equations. The resulting model captures coupled physical phenomena with …

Electrochemical Microsensors For In Situ Monitoring Of Chemical Compounds In Engineered And Natural Aquatic Systems, Jared Church

Electronic Theses and Dissertations

The adaption of needle-type electrochemical microsensor (or microelectrode) techniques to environmental science and engineering systems has transformed how we understand mass transport in biotic and abiotic processes. Their small tip diameter (5-20μm) makes them a unique experimental tool for direct measurements of analytes with high spatial and temporal resolutions, providing a quantitative analysis of flux, diffusion, and reaction rate at a microscale that cannot be obtained using conventional analytical tools. However, their applications have been primarily limited to understanding mass transport dynamics and kinetics in biofilms. With the advancement of sensor fabrication and utilization techniques, their potential applications can surpass …