Engineering Commons^™

Advanced Topologies Of High Step-Up Dc-Dc Converters For Renewable Energy Applications, Ramin Rahimi

Doctoral Dissertations

"This research is focused on developing several advanced topologies of high step-up DC-DC converters to connect low-voltage renewable energy (RE) sources, such as photovoltaic (PV) panels and fuel cells (FCs), into a high-voltage DC bus in renewable energy applications. The proposed converters are based on the combinations of various voltage-boosting (VB) techniques, including interleaved and quadratic structures, switched-capacitor (SC)-based voltage multiplier (VM) cells, and magnetically coupled inductor (CI) and built-in-transformer (BIT). The proposed converters offer outstanding features, including high voltage gain with low or medium duty cycle, a small number of components, low current and voltage stresses on the components, …

Studies Of Multiphase Distribution And Flow In Bubble/ Slurry Bubble Columns With /Without Internals And Advanced Sustainable Construction Materials Using Sophisticated Measurement Techniques, Omar Farid

Doctoral Dissertations

"Bubble/slurry bubble columns have been widely studied and employed as multiphase flow reactors with and without vertical heat-exchanging tubes. In order to understand more deeply the effect of the dense internals on the hydrodynamics of bubble/slurry bubble column, systematic experiments were performed to visualize and quantify using the radioactive particle tracking (RPT) technique. A new methodology for implementing the radioactive particle tracking (RPT) technique has been developed to investigate the effect of the dense internals on the hydrodynamics of the bubble/slurry column reactor. Monte Carlo N-Particle (MCNP) simulation has been implemented to simulate the system to generate a large number …

Development Of Flood Prediction Models Using Machine Learning Techniques, Bhanu Kanwar

Doctoral Dissertations

"Flooding and flash flooding events damage infrastructure elements and pose a significant threat to the safety of the people residing in susceptible regions. There are some methods that government authorities rely on to assist in predicting these events in advance to provide warning, but such methodologies have not kept pace with modern machine learning. To leverage these algorithms, new models must be developed to efficiently capture the relationships among the variables that influence these events in a given region. These models can be used by emergency management personnel to develop more robust flood management plans for susceptible areas. The research …

Fully Kinetic Particle-In-Cell Simulations Of Plasma-Surface-Dust Interactions For Lunar Exploration, Jianxun Zhao

Doctoral Dissertations

"The studies involving lunar surface explorations have drawn attentions in recent years. A better understanding of possible potential hazards to astronauts and electronic equipment has become a necessity for future lunar explorations. The lunar surface, lacking an atmosphere and global magnetic field therefore directly exposed to solar radiation and solar wind plasma, is electrically charged by the bombardment of solar wind plasma and emission/collection of photoelectrons. Additionally, lunar dust grains can also get charged and levitated from the surface under the influence of the electric field as well as gravity within the plasma sheath. Since the plasma sheath formed near …

Machine Learning Applications In Plant Identification, Wireless Channel Estimation, And Gain Estimation For Multi-User Software-Defined Radio, Viraj K. Gajjar

Doctoral Dissertations

"This work applies machine learning (ML) techniques to selected computer vision and digital communication problems. Machine learning algorithms can be trained to perform a specific task without explicit programming. This research applies ML to the problems of: plant identification from images of leaves, channel state information (CSI) estimation for wireless multiple-input-multiple-output (MIMO) systems, and gain estimation for a multi-user software-defined radio (SDR) application.

In the first task, two methods for plant species identification from leaf images are developed. One of the methods uses hand-crafted features extracted from leaf images to train a support vector machine classifier. The other method combines …

Evaluating Barriers To And Impacts Of Rural Broadband Access, Javier Valentín-Sívico

Doctoral Dissertations

"The lack of adequate broadband infrastructure persists in many rural communities. Beyond funding, additional barriers persist, such as digital literacy and community-level self-efficacy. As a result, the first contribution articulates barriers at the organizational level. This work proposes a framework based on the Theory of Planned Behavior to highlight stakeholder dynamics that have constrained Regional Planning Commissions from advancing broadband infrastructure in rural areas. One approach to address these barriers is to provide stakeholders with analytical tools to evaluate the benefits and costs of various broadband options for their community since there is not a one-size-fits-all solution. To this end, …

Wind Flow Characteristics Of Multi-Vortex Tornadoes And Their Wind Effects On Residential Houses, Yi Zhao

Doctoral Dissertations

"Tornadoes strike the USA very frequently, with an average of 1200 reports per year, and the average annual tornado-induced property loss has reached $10B. The devastation from recent tornadoes have prompted a renewed interest in better understanding tornado dynamics, their interactions with the built environment, and the performance of civil structures during tornadoes. In the past, the wind effects caused by single-vortex tornadoes have been widely studied, while the multi-vortex tornadoes were rarely considered. In fact, many previous deadly, costly tornadoes involved multiple vortices. Therefore, it is important to understand the wind flow characteristics of multi-vortex tornadoes in order to …

Engineering Ni/Al2o3 Catalysts By Atomic Layer Deposition For Methane Reforming, Baitang Jin

Doctoral Dissertations

"Dry reforming of methane (DRM) could be a promising choice to utilize natural gas (mainly methane or CH₄), recycle captured CO₂, and produce valuable syngas. Promoters (e.g., CeO₂ and MgO) on Ni/Al₂O₃ prepared by atomic layer deposition (ALD) and ALD-prepared ultrathin overcoating (e.g., ZrO₂ and CeO_x) on Ni/Al₂O₃ prepared by incipient wetness method were investigated for methane reforming.

MgO and CeO₂ prepared by traditional incipient wetness method were used to promote the performance of ALD-prepared Ni nanoparticles (NPs) supported on four-channel α-Al₂O_{3 …}

Strain And Temperature Measurement From Distributed Fiber Optic Sensors In Performance-Based Fire Engineering, Yanping Zhu

Doctoral Dissertations

"Strain and temperature measurement of steel and concrete structures under fires is critical to the understanding of structural performance yet historically challenging due to a significant gap in measurement science. This Ph.D. study characterizes in six parts low-cost distributed fiber optic sensors and applies them to strain, and temperature measurements based on Rayleigh and Brillouin light scattering. The first part aims to quantify the Rayleigh scattering based measurement accuracy of distributed fiber optic sensors under a heating-holding load protocol and characterize the effect of polymer coating on the sensors as the polymer softens and melts at elevated temperatures. The second …

Sensitivity Of The Two-Fluid Model To Constitutive Correlations For Large Diameter Pipes, Alexander Lee Swearingen

Doctoral Dissertations

"Multiphase flows are a significant factor in nuclear reactor operations. In order to understand this behavior in reactor systems, system analysis codes are used to simulate reactor conditions. Due to the nature of the nuclear industry, simulations predicting the void development in the core are required to be highly accurate. This work evaluated the sensitivity of the void fraction and interfacial area concentration predictions to changes in correlations used to calculate three parameters that are used to complete the interfacial drag calculation. The three parameters evaluated were drift-flux, void fraction covariance, and interfacial area concentration. The change in drift-flux correlation …

Post-Seismic Response And Repair Of Earthquake-Damaged Reinforced Concrete Bridges, Giacomo Fraioli

Doctoral Dissertations

“In bridge structures, column members are typically designed to be the primary source of energy dissipation during an earthquake. Therefore, reinforced concrete (RC) bridges that are damaged in an earthquake tend to have damage to the column members. While many studies have been conducted on seismic strengthening of RC bridge columns, most are focused on retrofit instead of repair. In addition, the limited research on seismic repair of RC bridges has focused on evaluating the response of individual columns (member level), not the bridge structure (system level), due to limitations in modeling and especially testing of full bridge structures. Local …

Design Methods For Pressure Relief Well Systems At Dams And Levees, Andrew Keffer

Doctoral Dissertations

"Flood risk reduction structures such as dams and levees are important systems that provide significant benefits to the nation. Relief wells reduce the substratum water pressures that can compromise them via internal erosion. The U.S. Army Corps of Engineers (USACE) analytical method to design relief well systems by calculating discharge and excess head along an infinite line of wells was developed from the 1930s – 1950s. The research presented here increases our understanding of the method’s history and uses analytical and numerical models to improve current infinite and finite well system design practices. The historical development of this method was …

Molten Steel Interactions With Tundish Linings And Refractory Glazes, Tyler Michael Richards

Doctoral Dissertations

"In the final stages of casting, molten steel is in contact with two main types of refractories: the working lining of the tundish used to serve as an intermediate vessel between the ladle and copper mold, and the various glazed carbon-bearing refractories used to control the flow of steel from the ladle to the tundish and from the tundish to the mold. If steel interacts with these refractories in such a way as to result in the formation of inclusions, it may be too late to remove them, leading to degradation of the steel’s mechanical properties. Understanding these interactions and …

Evaluation Of Novel Preformed Particle Gels For Conformance Control And Acid Stimulation Through Core Flooding Tests, Shuda Zhao

Doctoral Dissertations

"Acid stimulation and conformance control are two major methods to improve oil production. This study systematically evaluates two newly developed gels: Degradable Preformed Particle Gel (DPPG) and Re-crosslinkable Preformed Polymer Gel (RPPG). DPPG is designed to be a temporary plugging agent for acid stimulation and can self-degrade into a water-like fluid. RPPG is designed for reservoir sweep efficiency improvement and can re-crosslink to each other and form an immobile bulk gel after being placed in fractures or fracture-like conduits.

For DPPG, this study evaluates the effect of monomer, crosslinker, and initiator concentration on the swelling and degradation performance. Results show …

Bulk Nanostructured Steels For Nuclear Reactor And Extreme Environment Applications, Maalavan Arivu

Doctoral Dissertations

"Candidate accident tolerant FeCrAl fuel (ATF) claddings for light water reactors (LWRs) need to be thinner than current Zircaloys owing to higher neutronic penalty, demanding an improvement in strength. Therefore, equal channel angular pressing (ECAP), and high-pressure torsion (HPT) were used to produce bulk ultra-fine grained and nanocrystalline Kanthal-D [KD; Fe-21Cr-5Al-0.026C (wt.%) alloy] which resulted in an improvement in strength of up to 3 times their nominal strength from grain boundary strengthening, and dislocation strengthening. Dynamic recovery was promoted due to ECAP at 520 oC rendering it with a large area fraction of less mobile low angle grain boundaries (LAGBs) …

A Three-Dimensional Fully Coupled Hydro-Mechanical Elasto-Plastic Model For Unsaturated Soils With Consideration Of Hysteresis Behavior, Beshoy Sami Moussa Riad

Doctoral Dissertations

"Unsaturated soils are often used as a construction material in transportation infrastructures; in which it is subjected to cyclic traffic loadings and/or seasonal wetting-drying cycles. While mechanical hysteresis is a common feature of soils in general, hydraulic hysteresis is associated with unsaturated soils. Most existing constitutive models paid limited attention to the mechanical and hydraulic hysteresis behavior of unsaturated soils. This research presents a three-dimensional model for unsaturated soils and a chemo mechanical model for saturated soils. The unsaturated soils’ model has the following characteristic features: (a) the hydraulic and mechanical behaviors are fully coupled under 3D conditions; (b) it …

Corrosion Resistance Performance Investigation Of Mild Steel Bar Coated With Magnesium Phosphate Cement Paste, Fan Zhang

Doctoral Dissertations

"In this research study, the anti-corrosion mechanism of reinforcement embedded in magnesium potassium phosphate cement (MKPC) is explored. In addition, one type of additives, metakaolin, and one type of retarder, boric acid, are employed in MKPC to modify its properties in order to further investigate corrosion resistance and to achieve mass-production coating reinforcement at the work site. This coating method may be practical for some underwater construction and some traditional reinforcement concrete structures to reduce the reinforcement corrosion rate and to eventually extend service life in both repair and new construction applications.

By comparing the electrochemical properties of bare ribbed …

Signal Integrity Analysis And Electromagnetic Inteference Modeling For Autonomous Vehicles, Yuandong Guo

Doctoral Dissertations

"An autonomous vehicle (AV) may employ various sensors to detect the environment, and the hardware for self-driving should be able to process large volume of sensor data and make real-time decisions. For signal integrity (SI), both the bandwidths and data rates of the high-speed channels should meet the requirements. The electromagnetic interference (EMI) noise may become a major concern with the ever-increasing number of electric modules. This research focuses on both SI analysis and EMI modeling for AVs. The first topic is accurate and broadband three-phase motor modeling. The novel modeling methodology for a typical three-phase motor is presented, using …

Computational Fluid Dynamics Techniques For Multiphase Flow Systems, Jose Sebastian Uribe Lopez

Doctoral Dissertations

"Mathematical modelling of multiphase flow systems has been a major and persistent challenge over the last decades. Vast attempts to obtain predictive models can be found reported in literature, where major advances can be recognized in recent years, paired to enhancements in computer science and engineering. Notwithstanding, universally valid models with a mechanistic development are far from being achieved. The current status of modelling any multiphase flow system relies on the model order reduction of purely theoretical models. Such reductions and simplifications become the source of deviations in the predictions of the experimentally measured parameters and will constrain the applicability …

Novel Ferromagnetic Materials With Improved Mechanical Performance, Wesley Alexander Everhart

Doctoral Dissertations

"The ductility of intermetallics has long been a hindrance to their broad adaptation despite a significant range of properties such as magnetic, half-metallic, and shape memory behavior. The lack of a general theory for the ductility of intermetallics along with the lack of prior art that experimentally measured mechanical properties drives the need for significant investment in many of these novel magnetic materials in order to even understand, let alone correct, poor ductility.

This dissertation includes work that explored the effect of vanadium content and quenching rate on the microstructure and ductility of Fe-Co alloys. Results indicated that a martensitic …

Multifunctional Behaviors Of Two-Dimensional Materials And Their Composites, Yanxiao Li

Doctoral Dissertations

"Two-dimensional (2D) materials, including graphene, transition metal carbides or nitrides (TMC/Ns), have rich surface chemistry, superb electrical and mechanical properties. These unique properties make them ideal for multifunctional devices. Among them, we focused on graphene and TMC/Ns (i.e., MXenes), as well as their composites. Unlike the well-known graphene, MXenes, are relatively new and typically synthesized by the selective etching of the “A” layers from the layered carbides and /or nitrides known as MAX phases, which introduce MXenes with rich terminal groups (e.g. -O-, -OH, -F).

During my Ph.D. study, firstly, the adhesive and frictional behaviors, which are related to successful …

Influences Of The Internal Residual On Combustion Instabilities In The Misfire And Partial Burn Regimes Of A Dilute Spark-Ignition Engine, Rachel Inez Stiffler

Doctoral Dissertations

"Dilution in spark-ignition (SI) engines can improve fuel consumption and reduce emissions; however, increased levels of dilution either from excess oxidizer or exhaust gas recirculation (EGR) causes combustion to become more strained and cycle-to-cycle variations increase. At high levels of dilution incomplete combustion events (i.e. misfires and partial burns) start to occur, which cause combustion instabilities and eventually a dilute limit is reached. It is known the combustion instabilities seen are primarily due to the feed-forward mechanism present in the residual gases, but it is still unknown what about the residual is influencing the dynamics under high levels of dilution …

Theoretical And Experimental Application Of Neural Networks In Spaceflight Control Systems, Pavel Galchenko

Doctoral Dissertations

“Spaceflight systems can enable advanced mission concepts that can help expand our understanding of the universe. To achieve the objectives of these missions, spaceflight systems typically leverage guidance and control systems to maintain some desired path and/or orientation of their scientific instrumentation. A deep understanding of the natural dynamics of the environment in which these spaceflight systems operate is required to design control systems capable of achieving the desired scientific objectives. However, mitigating strategies are critically important when these dynamics are unknown or poorly understood and/or modelled. This research introduces two neural network methodologies to control the translation and rotation …

Array Signal Processing For Source Localization And Enhancement, Sohel J. Patel

Doctoral Dissertations

“A common approach to the wide-band microphone array problem is to assume a certain array geometry and then design optimal weights (often in subbands) to meet a set of desired criteria. In addition to weights, we consider the geometry of the microphone arrangement to be part of the optimization problem. Our approach is to use particle swarm optimization (PSO) to search for the optimal geometry while using an optimal weight design to design the weights for each particle’s geometry. The resulting directivity indices (DI’s) and white noise SNR gains (WNG’s) form the basis of the PSO’s fitness function. Another important …

Ecological Restoration Of Lead/Zinc/Copper Mine Tailings: Phytomanagement And Amendment Strategies To Enhance Substrate Functionality And Biomass Production, Mariam K. Al-Lami

Doctoral Dissertations

“The extreme physiochemical characteristics of mine tailings inhibit microbial processes and natural plant growth. Consequently, vast and numerous tailings sites remain barren for decades and highly susceptible to wind and water erosion. Phytostabilization is a cost-effective and ecologically productive remediation approach; however, tailings revegetation is generally challenging and must often be assisted with appropriate soil amendments. Amendments applied individually in greenhouse studies discussed herein revealed notable improvement in bioenergy crops growth only with biosolids treatments. Recalcitrant carbon amendments (biochar and humus) showed notable impact only on tailings physichochemical and hydraulic properties. Nevertheless, biosolids may not support sustained vegetation due to …

The Utilization And Loss Of Available Energy In Aerospace Systems, Mohammad Abbas

Doctoral Dissertations

“Theoretical principles and analytical methodology for the control volume-based energy availability methodology for aerospace vehicles are developed; applications are made to jet-propelled and rocket-propelled vehicles as well as to stand-alone engine systems. Energy availability utilization characteristics of a modeled turbojet engine are studied across a wide range of operating conditions of throttle setting, flight altitude, and flight Mach number. The method is also extended to consider jet-powered vehicles. Fundamental principles regarding entropy generation and energy availability are developed, including directly linking entropy generation and maximum range and endurance of a powered aircraft. Theory and application of the energy utilization methodology …

Effects Of Vacancies And Electron Temperature On The Electron Phonon Coupling In Cubic Silicon Carbide And Their Connection To The Inelastic Thermal Spike, Salah Al-Smairat

Doctoral Dissertations

“The electron-phonon interaction is an important interaction in many solids as it influences transport phenomena and related quantities such as the electrical and thermal conductivities, especially in nuclear and space applications. The importance of the electron-phonon interaction in primary damage production in 3C-SiC is the subject of this research.

The electron-phonon coupling factor was calculated using a hybrid Density Functional Perturbation Theory - Classical Electron Gas model. The coupling factor was calculated as a function of electron temperature in pristine and defective 3C-SiC, and relaxed defective cells. The electron-phonon coupling is found to depend strongly on the electronic temperature and …

Corrosion Protection Mechanisms Of Trivalent Chromium Based Passivations On Γ-Znni Coated Al6061-T6 Alloy, Kevin Foster

Doctoral Dissertations

“The role of cobalt in trivalent chromium passivations (TCPs) to improve corrosion resistance of γ-ZnNi coated steel and aluminum is based on its effect on hexavalent chromium content in the passive layer. Investigations of both a cobalt-containing and cobalt-free TCP on SAE 1008 steel indicated that both passivations protect well for up to 1000 hours in neutral salt spray exposure (SSE). A repetition on Al 6061-T6 alloy indicated that TCP performed much better than cobalt-free TCP implicating the underlying substrate. Optical and electron micrographs indicated physical changes such as crack thickness, crack density, passivation porosity, and passivation thickness existed between …

Characterization And Utilization Of Alkali-Activated Concrete For Sustainable Infrastructures, Eslam Gomaa

Doctoral Dissertations

“This study has investigated the feasibility of using locally available fly ashes (FAs) to synthesize alkali-activated concrete (AAC) for different structural and repair applications. Using AAC made of 100% FA reduces global CO2 emissions, saves energy, and decreases raw material consumption during the production process of ordinary Portland cement. Class C FAs, sourced from Labadie, Jeffery City, Kansas City, Thomas Hill, and Sikeston power plants in the state of Missouri, were used to synthesize the AAC. Sodium silicate (SS), Na2SiO3, and sodium hydroxide (SH), NaOH were used as the alkali activators. Slag, crumb rubber, and air-entraining admixture were used as …

Modeling Strategy For Emi Filter And Flyback Transformer, Ruijie He

Doctoral Dissertations

“The switch-mode power supply is key to miniaturizing power adapters. However, the switching nature of the circuit introduces issues in conducted emissions. In a flyback converter, the transformer serves as the path for common mode current flowing from the primary side to the secondary side. Different winding technologies have been invented and implemented to reduce the capacitance between the primary side and the secondary side. But the repeatability of the winding is still poor due to the fluctuations of the winding machine. Thus, the resulting conducted emission has a fluctuation that can lead to failure in the compliance tests. EMI …