Engineering Commons^™

An Asynchronous Circuit Design Language System, Gregory Martin Bednar

Doctoral Dissertations

"This paper presents a system for specifying the behavior of asynchronous sequential circuits. The system consists of a special purpose Asynchronous Circuit Design Language (ACDL), a translator and a flow table generation algorithm. The language includes many special features which permit quick and precise specification of terminal behavior. It is best suited for problems originating from a word description of the circuit's operation. The translator is written with the XPL Translator Writing System and is a syntax-directed compilation method. From the translated ACDL specifications, the flow table algorithm generates a primitive flow table which is the required input for the …

Determination Of Thermal Contact Resistance Between Metals Using A Pulse Technique, William Edward Stewart Jr.

Doctoral Dissertations

"This dissertation reports the results of an experimental and analytical investigation to determine the thermal contact resistance of several metal specimen pairs using a relatively new pulse technique. Metal specimens were aluminum 2024-T3, aluminum 6061-T6, aluminum 7075-T6, copper 110, stainless steel 304, molybdenum, and Armco iron. Thermal contact resistance was also determined for dissimilar metal specimen pairs of aluminum 6061-T6 - copper 110 and aluminum 7075-T6 - copper 110. Aluminum 7075-T6, copper 110, and stainless steel 304 specimens were tested to determine the variance of contact resistance with time after loading.

Specimens were circular cylindrical disks between .033 and .061 …

Distributed-Network Realizations For The Simulation Of Partial Differential Equations, Roy Dale Hensley

Doctoral Dissertations

"A method is developed for the simulation of the partial differential equation

-u_xx + k_ou_tt + k_lu_t +k₂u = g(t)

for various boundary conditions. The boundary conditions are used to classify the problems into types and the Laplace transformed solution of the most general problem of each type is obtained.

Synthesis techniques are presented for the realization of circuits containing distributed networks that can be used to simulate the partial differential equation for given boundary conditions. Several heat flow and vibrating string examples are included to illustrate the application of the …

Mass Transfer With Second-Order Chemical Reaction Inside Circulating Fluid Droplets, Roy James Brunson

Doctoral Dissertations

"The solution of a mathematical model is presented which describes mass transfer accompanied by a second-order chemical reaction inside a circulating, fluid sphere for the laminar flow region. The values for eight different mass transfer indices are presented as a function of the Peclet number, reaction number, diffusivity ratio, concentration ratio, and the dimensionless contact time. The results of this work are compared with the film and penetration theories for mass transfer with reaction as modified to apply inside a fluid sphere. This work corrects the three factors which limit the accuracy of applying previous theories to fluid spheres: geometrical …

Grain Boundary Diffusion In Ionic Crystals, Kulwant Singh Sabharwal

Doctoral Dissertations

"The diffusion of ¹³¹I in single crystals and along the tilt grain boundaries of pure and calcium chloride doped (142±5 ppm) bicrystals of sodium chloride, grown by Czochralski technique, was investigated using a microtome sectioning technique. Results on bulk diffusion in pure NaCl agree well with the results of earlier investigators and are represented by the D=(504 cm²/sec)exp (-2.27 ev/kT). Enhanced diffusion of ¹³¹I is observed along the grain boundaries and the presence of the dopant lowers the grain boundary diffusivity over the entire temperature range of 430ºC - 570ºC studied in the present investigation. Thermal activation and electrical polarization …

The Effect And Compensation Of Time-Base Perturbations In Analog Recording Systems, Clifford D. Skouby

Doctoral Dissertations

"The mean square error between recorded and reproduced signals is used as an error measure to determine the effects of time-base perturbations on an analog singal. The mean square error caused by time-base perturbations is shown to be proportional to the product of the square of the signal bandwidth and the time-base error variance for the case of low pass signal. When the signal is band pass, there is shown to be an additional error term which is proportional to the square of the signal center frequency and the time-base error variance.

Calculations are also carried out to determine the …

A Learning Receiver For Communication In Three-Component Multipath Channels, Richard Paul Brueggemann

Doctoral Dissertations

"An adaptive receiver is designed for transmissions through a time-varying multipath channel which may include both specular and diffuse components. The design is based on the theory of unsupervised learning machines and the receiver is a recursive structure which does not grow in complexity with each new observation, but is Bayes' optimal at each instant of time. The multipath medium is modelled as an aggregate of L conditionally independent transmission paths, each consisting of random and/or fixed reflections, and is identified in terms of three components: (1) indirect diffuse scatter, (2) indirect specular reflection, and (3) direct transmission. The channel …

Iicads--Integrated Interactive Computer Aided Design System, Archie Golden Lambert

Doctoral Dissertations

"This research has three goals. The first goal is to develop a software interface (supervisor) to support and control a variety of interactive subsystem modules; thus eliminating manual scheduling of interactive jobs. The second goal is to develop a common methodology for interactive subsystem design. The third goal is to develop a linear systems analysis package using the facilities developed under the first two goals. A software interface (supervisor) to support and control a variety of interactive subsystem modules is described. The supervisor operates under the constraints of a large multiprogramming variable task operating system as opposed to a time …

Computer Assisted Teaching Of Steel Design, Wendelin Henry Mueller Iii

Doctoral Dissertations

"A method for use in creating a university level course is presented. The specifics of each of the steps is given in general terms to allow its application to as many different topics as possible. This method is then specifically applied in the formation of a fundamental steel design course using the American Institute of Steel Construction Specification. The reasoning utilized in each phase of development is documented. A lecture style presentation complemented by a series of student oriented computer programs was chosen for use. The details of the course material in outline form is given along with the computer …

Synthesis And Properties Of Cadmium Manganese Ferrites, B. W. Jong

Doctoral Dissertations

"The formation sequence of (Cd,Mn,Fe) (Mn,Fe)₂O₄ from the individual oxides,x CdO + (1-x) MnCO₃ + α-Fe₂O₃,was found by X-Ray diffraction. Cd(Mn,Fe)₂O₄ was formed completely from CdO·Fe₂O₃ and CdO·Fe₂O₄ at 900°C and reacted with MnFe₂O₄ for 0 < x < 0.5 and with α-Fe₂O₃ for 0.5 < x < 1.0 to form a single phase of (Cd,Mn,Fe) (Mn,Fe)₂O₄ at 1150°C. This is the first time that the details involved in the formation sequence of CdMn-ferrite have been shown. A mixture of 0.5 CdO + 0.5 MnCO₃ + α-Fe₂O₃ was calcined at 900°C for 2 hrs forming Cd(Mn,Fe)₂O₄ with no Cd present in the other phases. Sintering was accomplished at 1150°C for 30 minutes forming a single phase of Cd₀.₅Mn₀.₅Fe₂O₄ with a bulk sintered density of 98-99% of the X-Ray density. The rate of changing density followed the relationship, p = K ln t + c, at temperatures between 1050°C and 1300°C. Magnetic properties of CdₓMn₁₋ₓFe₂O₄ were affected by composition x. A relationship, B = gx + h, was found between maximum magnetic flux density B and composition x at room temperature for 0 <̲ x <̲ 0.3. This was rationalized by a modification of Néel's theory. The maximum magnetic flux density decreased with increasing cadmium concentration for 0.3 < x <̲ 0.5. This decrease was attributed to the changing direction of the magnetic moment in the octahedral site sub-lattice according to the superexchange theory. No magnetic properties were observed due to the formation of a compensated antiferromagnetic phase for 0.5 < x <̲ 1.0. Maximum magnetic flux density increased with bulk density, while the coercive force decreased with the grain growth and the initial permeability increased with the bulk density and grain size. A stator core used for a-c electric motor application was formed by pre-sintering at 900⁰C for 2 hrs. Slots were then sawed with a tungsten carbide blade and final sintering was accomplished at 1150⁰C for 1 hr"--Abstract, pages iii-iv.

Hydro-Thermal Generation Unit Commitment And Dispatch Using A Dynamic Programming Approach, Warren Dean Graham

Doctoral Dissertations

"The problem of thermal unit commitment is solved with dynamic programming. A practical example is given which solves the problem for a six generator system over a one year time span. This long range solution is used with a hydro optimization procedure to give an optimized hydro-thermal unit commitment solution. From this, a worth of hydro value is computed for each month, which may be used in the daily dispatching of thermal units and hydro. Applications of the program are also shown for aiding in generator maintenance scheduling and evaluating purchase power contracts with neighboring utilities. Error analysis is made …

Effects Of Cr-Plating And Environment On The Cracking Of Low Alloy Steels At High Temperatures, Robert C. Tooke

Doctoral Dissertations

"The cracking of low alloy Cr-Mo-V steels under cyclic stress at 1000-1100°C. was studied using a specially designed test apparatus. The results obtained from specimens plated with hard chromium are compared to those of unplated specimens. Tests conducted in gas mixtures of carbon monoxide and carbon dioxide showed that a high CO/CO₂ ratio retards cracking in both plated and unplated specimens. Both external and internal oxidation are used to explain these results. Inherent microcracks in the hard chromium plating promoted cracking in all CO/CO₂ environments. It was also found that these steels are severely embrittled in the presence …

An Experimental Investigation Of The Effects Of Ambient And Heated Steady Flow And Intense Sound Levels On The Response Of Acoustic Filter Elements, Raymond H. Schaffart

Doctoral Dissertations

"The primary purpose of this research was to investigate the effects of flow and finite amplitude waves on the response of acoustic elements. A further purpose was to evaluate the effects of elevated temperatures and cross-sectional dimensions on element performance. As an integral part of this work various laboratory techniques were explored for their suitability.

Empirical models for the acoustic impedance of side branch resonators were developed for the two operational modes, i.e., flow past the resonator and finite amplitude wave inputs. A description of the complex variation of the acoustic resistance of the resonator with flow past and variable …

A Study Of The Solid Regions In The System Zr-Te, Frances Dolores Jenkins

Doctoral Dissertations

"Relative intensity measurements of X-ray powder diffraction lines were made of compositions in the region ZrTe₀.₅ to ZrTe₂.₀, fired between 600º and 817ºC in evacuated sealed tubes. The experimental relative intensities of samples between ZrTe and ZrTe₂ were compared with values calculated for several theoretical models with different Zr vacancy ordering schemes and Te vacancy concentrations. The most probable structural model for compositions in the range ZrTe to ZrTe₁.₅ is one in which the number of Zr vacancies located at z = 0 ranges from 0% to 30%, with the concentration of Te vacancies ranging from 0 to 35%. A …

The Effect Of Impurities And Additives On The Electrowinning Of Zinc, Haruhisa Fukubayashi

Doctoral Dissertations

"The effect of various impurities, commonly found in zinc electro-winning solutions, on the surface morphology of deposited zinc was investigated. Individual additions of the impurities Al, Ag, Cd, Co, Cr, Cu, Ge, Mn, Ni, Sb, Sn, Ti, PbO₂ , PbSO₄, and HCl were studied. In a few cases additives of animal glue, gum arabic, and Na₂SiO₃, were used individually or in combination, to determine their effect on the surface structure of the deposited zinc. Comparisons were then made with deposits from a pure electrolyte consisting of H₂SO₄ and Zn⁺², 200 and 65 g/l, respectively. The zinc was deposited on a …

A Monte Carlo Calculation Of Neutron Reflection From Various Curved Surfaces, Charles Jack Kalter

Doctoral Dissertations

"Plane parallel neutron beams normally incident upon the curved surface of a solid reflector are studied with the Monte Carlo method. The geometries studied are cylindrical, parabolic, and hemispherical. It is shown that when the curved surface is cylindrical, a small "focusing effect" occurs in the reflected neutron beam. Parabolic and hemispherical surfaces do not show "focusing". A study of the factors which determine the spatial dependence of the reflected flux shows that the probability of emergence of a neutron, traveling a fixed distance from a point inside the reflector, depends upon the curvature of the surface. It is only …

Low-Energy Electron Transport By The Method Of Discrete Ordinates, David E. Bartine

Doctoral Dissertations

"The one-dimensional discrete ordinates code ANISN has been adapted to simulate the transport of low-energy (on the order of a few MeV) electrons. Two different calculational techniques have been utilized for the treatment of electron-electron collisions that result in a small energy transfer. One method treats such collisions by a continuous slowing-down approximation, while the other method treats these collisions by the use of a very approximate cross section. Calculated results obtained with ANISN are compared with experimental data for the transmitted energy and angular distributions for 1-, 2.5-, 4-, and 8- MeV electrons normally incident on aluminum slabs of …

A Measurement Of Complex Viscosity With Large Amplitudes, Kuo-Shein Shen

Doctoral Dissertations

"In order to study the viscoelastic properties of polymer solutions and greases, a dynamic apparatus was built for making measurements of complex viscosity. Characteristic impedance was measured by a force transducer, an accelerometer and a phase meter. Large amplitudes to 0.5 inch can be obtained with this apparatus. The largest amplitude used was 1.27 x10⁻¹ cm. The frequency range was 30 Hz - 1500Hz. The lowest dynamic viscosity to be measured was 0.5 poise. In order to determine the capabilities of the instrument, complex viscosities of polymer solutions and greases were measured. The polymer solutions studied were polyisobutylene (PIB) L-80, …

On-Line Economic Optimization Of A Chemical Reactor, Jesse Daniel Bennett

Doctoral Dissertations

"An economic optimizing control system for a continuous flow stirred tank chemical reactor is designed, simulated, and installed on a pilot scale reactor. The control scheme utilizes a reaction and reactor model to predict on-line the economic optimum of a reactant concentration. In this manner the control system manipulates the reactant flow rate to maintain the optimum concentration during changes in reaction-reactor parameters with time. Typical parameter changes include the decay of reaction catalyst activity. The optimizing controller will function in conjunction with various operating policies including control to maintain a specified production rate"--Abstract, page ii.

Response Surface Study Of A Characteristic Chemical Plant, John Thomas Mason Iii

Doctoral Dissertations

"Study of the return on investment response surface of a characteristic chemical plant indicates unimodality in the valid region, but the optimum design condition with this response surface is strongly affected by the correlation used for the investment. The method used for the design of this type of chemical plant incorporates the use of a simulation routine for preliminary estimates"--Abstract, page ii.

Structure And Properties Of Silver Borate Glasses, Edward Nashed Boulos

Doctoral Dissertations

"Clear glasses form in the system Ag₂O-B₂O₃ up to about 35 mol.% (65 wt.%) Ag₂O. Infrared absorption, thermal expansion and density data indicated an analogy to the Na₂O-B₂O₃ system. Pentaborate-triborate group pairs appear to be formed upon the addition of Ag₂O to B₂O₃ up to 20 mol.% Ag₂O and diborate groups from 20 to 33 mol.% Ag₂O. This interpretation is supported by the comparison of the infrared absorption spectra of quenched and crystallized glasses. One crystallization product ,Ag₂O.4B₂O₃, has been identified previously. A new compound starts to appear at 28 mol.% Ag₂O. Silver is generally present as a network modifier …

The Genesis Of Cellular Precipitation In Copper Rich Copper-Indium Alloys, Raymond Albert Fournelle

Doctoral Dissertations

"The morphology of cellular precipitation in a Cu-9.5at.%In alloy has been investigated by light and electron microscopy and x-ray and electron diffraction. Both cellular and general precipitation were observed to occur simultaneously in quenched and aged alloys while only cellular precipitation was observed to occur in isothermally aged alloys. Because of the presence of wide, vacancy depleted precipitate free zones in the vicinity of grain boundaries, general precipitation was observed to have no effect on the early development of cellular precipitation. Hence, the early development of cellular precipitation was found to be identical for both types of heat treatment. By …

Thermal Lattice Expansion Of Various Types Of Solids, Jayantkumar Shantilal Shah

Doctoral Dissertations

"Thermal lattice expansion studies of various types of solids were carried out in this investigation and were corelated to their crystallographic and various other properties. The advantages and limitations of various methods of studying thermal expansion are discussed in detail. A new design for a versatile low temperature camera to study expansion by an X-ray method is proposed. The thermal lattice expansion of silicon was negative below 119ºK. This behavior is discussed in terms of crystal structure and interatomic bonding. Diamond exhibits no anomalous thermal expansion. Lattice parameter data for many metals at low temperatures are reported for the first …

Transient Hydraulic Simulation: Breached Earth Dams, D. L. Fread

Doctoral Dissertations

"A conceptual method to alleviate flood damages due to over-topping failures of small earthfill dams is the incorporation of a relatively thin erosion retarding layer within the dam. This paper investigates the reduction in the reservoir release due to the hypothetical erosion retarding layer. In addition, the paper provides a method for the determination of an optimal location of the layer so as to minimize the maximum possible reservoir release due to a gradually breached earth dam. The transient reservoir flow is simulated by a numerical model, based upon the solution of the one-dimensional St. Venant unsteady open-channel flow equations. …

Identification Of Centers Of Influence For Urban Areas, Robert W. Meyer

Doctoral Dissertations

"A method is developed for the identification of the spatial locations about which urban population densities tend to be distributed. The identification of these "influence centers" is based upon the use of available census data. The method is developed for application to any population characteristic which can be logically represented in terms of spatial density. Examples of such characteristics are; total population, population by race, and population by income group. The method is empirically developed and verified for restricted spatial distributions using artifically generated census tract information. These spatial distributions are compatiable with population distributions that are most readily modeled …

Detection Of Delay Time And Filtering Using Sequency Domain Technique, Earl F. Richards

Doctoral Dissertations

"A procedure is presented by which it is possible to detect a known signal of unknown delay in a noisy medium contaminated by noise. From the results the characteristics of a sequency digital filter which would be required to remove the noise contamination is indicated. The Walsh functions are discussed and the sequency domain, which is analogous to the continuous frequency domain, is used in the spectral analysis of signals. The binary nature of the Walsh functions and their ease of generation makes processing of signals easier than the Fourier analysis approach. The applications of fast forward and inverse Walsh …

An Investigation Of The Radiation Polymerization Of Methyl Methacrylate-Kaolin Clay Composites, James Jackson Beeson

Doctoral Dissertations

"A kinetic and characterization study has been made on the effects of gamma-rays (Co⁶⁰) on the polymerization of a 50-50 weight mixture methyl methacrylate (MMA) kaolin clay system. The effect of dose rate (7.35 - 24.9 rads per second), temperature (25 to 75ºC) and total dose on the percentage conversion of monomer to polymer was studied. The rate of formation of polymer at 25ºC in the composite system was found to be faster when compared to a bulk MMA system at the same experimental conditions. This acceleration showed that the clay had a catalytic effect on the formation of polymer. …

Activation Volumes Of Carbon Diffusion In F.C.C. Iron-Nickel Alloys, James Raymond Keiser

Doctoral Dissertations

"The disaccommodation technique was used to determine the activation volume of carbon diffusion, ΔV, in six fcc iron-nickel alloys. Measurements were made at temperatures ranging from 68ºC to 90ºC and pressures up to six kilobars on samples having a nickel content between 31 and 63 at. %. A maximum activation volume of 3.9 cm³/mole was found at 34 at. % nickel. The compositional dependence of ΔV is satisfactorily reproduced by a magnetic energy continuum model in which it is assumed that the activation free energy of diffusion is essentially ferromagnetic in origin "--Abstract, page iii.

An Investigation Of Subsequent Yield Phenomena, Joseph George Hoeg

Doctoral Dissertations

"A method utilizing high pressure fluid environments is described whereby a three-dimensional subsequent yield surface was determined for 304 stainless steel. Cylindrical parent specimens of this material were prestrained in axial compression under fluid pressure and then small sub-specimens were sectioned from these parent specimens. Finite element techniques were used to optimize the parent specimen size so that a zone of uniform axial stress would result during the prestraining. Longitudinal strains in this zone were monitored during the prestraining and the sub-specimens were cut from this region in a manner that did not allow the machining to appreciably affect the …

An Age Hardening Study Of Magnesium-Thorium-Manganese Alloys, Kuldip Singh Chopra

Doctoral Dissertations

"The age hardening processes in Mg-3.5 wt.% Th-1.0 wt.% Mn and Mg-1.0 wt.% Th-1.0 wt.% Mn alloys have been studied by light and electron microscopy, and by electron and X-ray diffraction. At aging temperatures of 300ºC and below, G.P. zone formation rapidly hardens these alloys followed by the precipitation of disc shaped plates during averaging. During aging above 300ºC, no G.P. zones form and the disc shaped precipitate grows to very large sizes. The combined results of X-ray and electron diffraction indicate that the disc shaped precipitate has a Mg₃Cd (DO₁₉) type structure. The basal plane of the Mg₃Th discs …