Engineering Commons^™

Modelling Interruptions Of Human-In-The Loop Tasks, Muhammet Servet Gulum

Doctoral Dissertations

"Interruptions are a part of our everyday experience and are increasingly becoming a part of our work. Systems are typically not designed with consideration of the effects of interrupting a user during a task sequence. Research is being done in the field of interruptions and its effects. There have been various claims about the effects of interruptions on human task performance. It has been shown that interruptions may not only increase the time to perform a task but also decrease the performance. It has also been analyzed that the effect of interruptions depends on many parameters including task complexity, point …

Analyses Of Alternative Energy Deployments, Mathew Thomas

Doctoral Dissertations

"Energy use around the world is rising drastically. Fossil fuels, including liquid fuels, natural gas, and coal, are expected to supply 80% of the world's energy need in 2035. As a result, the world's energy-related carbon dioxide emission is expected to increase from 30.2 billion metric tons in 2008 to 43.2 billion metric tons in 2035. Significant steps are necessary to reduce the dependence on fossil fuel and to reduce greenhouse gas emissions. Renewable and alternative energy technologies can assist in reducing the use of fossil fuels and can reduce greenhouse gas emissions. However, most of the renewable energy technologies …

Prediction And Performance Of Single Piles In Clay Soils Under Vibratory Loadings, Domenica Cambio

Doctoral Dissertations

"This study developed a model for predicting the response, in terms of amplitude versus frequency of single piles under lateral vibratory loadings embedded in clay or fine silty soils. The model incorporates frequency dependent parameters and the effects of soil non-linearity through the relationship between soil shear modulus and damping with strain. A computer program, Dyna5, was used to generate the computed response of single piles using the Novak and El-Shamouby (1983) approach. Soil non-linearity was accounted for by incorporating spline interpolation routine into Dyna5. Sliding and coupled rocking vibrations were addressed. The computed responses were predicted and compared with …

Power Allocation And Linear Precoding For Wireless Communications With Finite-Alphabet Inputs, Mingxi Wang

Doctoral Dissertations

"This dissertation proposes a new approach to maximizing data rate/throughput of practical communication system/networks through linear precoding and power allocation. First, the mutual information or capacity region is derived for finite-alphabet inputs such as phase-shift keying (PSK), pulse-amplitude modulation (PAM), and quadrature amplitude modulation (QAM) signals. This approach, without the commonly used Gaussian input assumptions, complicates the mutual information analysis and precoder design but improves performance when the designed precoders are applied to practical systems and networks. Second, several numerical optimization methods are developed for multiple-input multiple-output (MIMO) multiple access channels, dual-hop relay networks, and point-to-point MIMO systems. In MIMO …

Dual Active Bridge Converters In Solid State Transformers, Hengsi Qin

Doctoral Dissertations

"This dissertation presents a comprehensive study of Dual Active Bridge (DAB) converters for Solid State Transformers (SSTs). The first contribution is to propose an ac-ac DAB converter as a single stage SST. The proposed converter topology consists of two active H-bridges and one high-frequency transformer. Output voltage can be regulated when input voltage changes by phase shift modulation. Power is transferred from the leading bridge to the lagging bridge. It analyzes the steady-state operation and the range of zero-voltage switching. It develops a switch commutation scheme for the ac-ac DAB converters. Simulation and experiment results of a scaled down prototype …

Advanced Neural Networks And Their Applications In Smart Grids, Bipul Luitel

Doctoral Dissertations

"Today, neural networks (NN) are used in several system identification and nonlinear control system applications. However, their implementation on large systems has been limited either because of their degraded performance or the amount of time and computation required for implementing them being impractical for real applications. The primary emphasis of this research is on the development of advanced NN - simultaneous recurrent neural networks (SRN) and cellular neural networks (CNN); and methods for learning the complexity of large systems.

US electricity infrastructure is one of the largest and the most critical infrastructure consisting of thousands of generators connected by transmission …

Analyzing Risk And Catastrophic Accidents: Using Lopa And Human Factors To Improve Safety In Generic Projects, Siddharth B. Damle

Doctoral Dissertations

"Risk assessment and identification in the early stages of any project is critical to the success of that project from time, budget and cost prespective [sic]. Identifying unacceptable risks and making provisions to mitigate those, can reduce the uncertainty in the project and ensure its smooth completion and closure. Various techniques have been developed over time to identify and quantify risks. Inspite of all the available research on risk management tools, accidents continue to happen and projects consistently fail.

The objective of this study is to first, determine the generic risks that can be encountered by a project. A list …

Behavior Of Advanced Innovative Materials For Improved Long-Term Bridge Performance, Wei Zheng

Doctoral Dissertations

"The dissertation is to present the investigation results and comprehensive understanding of the long-term performance and behavior of innovative construction materials. The materials are applied in bridge engineering in order to either enhance the conventional materials or replace them. The dissertation consists of two major parts: structural steel coatings for corrosion mitigation and thermal behavior of concrete bridge.

In First Part, evaluation of advanced structural steel coatings was carried out through laboratory weathering tests (salt-fog resistance test and QUV weathering test), adhesion test, and electrochemical techniques. Fifteen coating systems were evaluated in this part, which covered both coating and recoating …

Decreasing Time To Market For A Medical Device: New Methods For The Product Development Process, Kelly Marie Davis

Doctoral Dissertations

"Through an example, led at a leading medical device company, this dissertation will demonstrate that by applying certain lean principals and tools to the development of a medical device, shortened development times can be obtained. The two papers presented in the dissertation will fill a gap in current literature. Literature presents lean techniques and applications used in many different industries. But, due to the uniqueness of the medical device industry, these general techniques are not ideal. New methods will be used and validated at a medical device company, Covidien. Instead of trying to implement many general lean principals to their …

Design And Experimental Study Of Turbo Equalization For Multiple Antenna Systems, Amirhossein Rafati

Doctoral Dissertations

"Multiple-input multiple-output (MIMO) wireless communication systems have attracted a lot of interest in the past decade due to their capability in delivering high spectral efficiency as well as their robust performance against fading. In MIMO inter-symbol interference (lSI) channels, a severe interference problem occurs due to the lSI and co-channel interference. Thus, the error propagation problem becomes more serious, and its mitigation has to be considered when designing the receiver. In this regard, a turbo equalizer which exchanges soft information between the equalizer and the decoder has been shown to be an effective method to combat the lSI caused by …

Discrete Fiber-Reinforced Polyurea Systems For Infrastructure Strengthening And Blast Mitigation, Natalia L. Carey

Doctoral Dissertations

"The research presented in this dissertation focused on evaluating the effectiveness of various blast mitigation materials and coating technologies to be used for enhancing blast resistance of structural members. Mechanical properties and blast mitigation performance of different discrete fiber-reinforced polyurea (DFRP) systems were investigated through experimental and analytical work. Four technical papers discuss the research efforts conducted within this dissertation.

The first paper examined the development and characterization of different DFRP systems for infrastructure strengthening and blast retrofit. The behavior of various systems which consisted of chopped E-glass fibers discretely integrated in with the polyurea matrix was evaluated through coupon …

Development Of Third Generation Advanced High Strength Steels, Meghan C. Mcgrath

Doctoral Dissertations

"Lightweight duplex steels with combinations of either bainite, acicular ferrite, and austenite or martensite and austenite were investigated as third generation advanced high strength steels targeted for automotive applications. Large additions of manganese (>13 wt%) and carbon (

Duplex steels with different volume fractions of primary δ -ferrite were used to study the crystallography of austenite formed during the peritectic reaction. Solute profiles across the peritectic interface showed aluminum segregated near the interface which promoted bainitic ferrite formation. Thermal treatments were used to manipulate the concentration and type of oxides and the ferrite plate density was found to correlate …

Experimental Investigations Of Pseudospark Discharge And Pseudospark Produced Intense Electron Beams, Jing Hu

Doctoral Dissertations

"This dissertation focuses on the pseudospark discharge, a pulsed discharge discovered for the first time in 1970's. This dissertation is prepared as three journal articles in the style used by Missouri University of Science and Technology. A high voltage pseudospark discharge experiment setup, and discharge and electron beam diagnostic system are constructed and presented in this work. Three journal articles which have been published or are under review are presented in this dissertation on various topics of the pseudospark discharge.

Paper 1 "Experimental investigation of formation time in single-gap pseudospark discharge" is focused on experimental investigations of the time-dependent characteristics …

Friction Stir Welding Of High Temperature Alloys, Jiye Wang

Doctoral Dissertations

"Friction stir welding (FSW) of Ti-6Al-4V alloy, nickel-based and iron-based oxide dispersion strengthened (ODS) alloys (MA754 and MA956) has been studied. The main aspects covered include tool evaluation, microstructural evolution, mechanical properties, and correlation between processing, microstructure and mechanical properties. Tool performance study was carried out for Ti-6Al-4V alloy with refractory tools made of W-1.1%La₂O₃ and two different grades of WC-Co based materials. The results showed that tool degradation can be attributed to mechanical and chemical interaction with processed material. The nature of tool-workpiece interaction was tool material dependent and influenced the resultant microstructure and weld quality in the stirred …

Impact Of Plug-In Hybrid Electric Vehicles On The Power Grid In A Smart Environment, Zahra Darabi

Doctoral Dissertations

This dissertation focuses on the interactions between plug-in hybrid electric vehicles (PHEVs) and the power grid. This study has used the data available through the national household travel survey (NHTS) to obtain realistic information such as the arrival time of vehicles, miles driven, and vehicles types. After data manipulation, the aggregated PHEV charging load profiles (PCLP) have been developed. The results show that the peak of PCLP overlaps with the domestic load peak. In order to alleviate this issue, several charging policies have been developed and their impacts on PCLP have been investigated. As a next contribution, the data obtained …

Influence Of Microstructural Length Scale On Deformation Behavior Of Magnesium Alloys, Wei Yuan

Doctoral Dissertations

"Friction stir processing (FSP) is emerging as an effective tool for microstructural modification. Mg-Al-Zn alloys with different aluminum contents were subjected to FSP to achieve fine grained and ultrafine grained (UFG) structure. The objective of this work was to study the influence of microstructural length scale on the governing deformation and strengthening mechanisms of FSP magnesium alloys.

FSP introduced strong basal fiber texture and processing parameter dependent grain/precipitate size and distribution. Grain refinement promoted non-basal dislocation activation at room temperature. The strength of the alloy increased as a consequence of grain refinement following classic Hall-Petch relationship to different extents due …

Identification And Visualization Of Electromagnetic Coupling Paths & Nonlinear Capacitors For Esd Protection, Hongyu Li

Doctoral Dissertations

"The first topic of this dissertation focuses on developing methods to identify and visualize electromagnetic coupling paths. The basis of the approach is to utilize an analogy between electromagnetic energy flow and fluid flow. This allows one to apply the theories and algorithms of fluid dynamics to electromagnetics and thereby to visualize the electromagnetic energy flow. This in turn can be utilized to identify the electromagnetic coupling path.

The second topic of this dissertation investigates the nonlinearity of capacitors and suggests improved trade-off between electrostatic discharge (ESD) protection and data bandwidth by using the antiferroelectric (AFE) capacitors as ESD protection. …

Influence Of Temperature And Microstructural Modification On Formability Of Magnesium Alloys, Arun Mohan

Doctoral Dissertations

"The ß-precipitate free AZ31, ß-precipitate rich AZ91 and a few Mg-Y-Zn alloys were studied to understand the dependence of Mg formability on microstructural condition and temperature. Friction stir processing (FSP) was used to refine the grain size and to obtain desirable distribution of precipitates in the matrix. Since Mg alloys exhibit challenges in achieving room temperature formability, superplastic deformation was utilized. This work focused on high strain rate superplasticity (HSRS, ≥10⁻² s⁻¹) which is more attractive for industrial applications as compared to the slower rates of conventional superplasticity.

Thermally stable fine grains and pinning particles at HSRS temperatures were essential …

Imaging The Subsurface In Karst Terrain Using Electrical Resistivity Tomography, Evgeniy V. Torgashov

Doctoral Dissertations

"Five electrical resistivity tomography (resistivity) case studies are presented. The first case study, entitled "Springfield Underground", includes ERT data acquired with the purpose of imaging the ceiling of an limestone aggregate mine following simultaneous localized roof failure. The interpretation of the ERT data indicates roof rock failure occurred at the intersection of two previously unmapped near-vertical solution-widened fractures.

At the "Chesterfield Dam" site, resistivity data were acquired to identify the zone of seepage through an earthfill dam. The seepage pathway beneath the dam is interpreted as through a solution-widened fracture, the top of which constituted a segment of the original …

Underground Mine Fire Simulation Using Multiscale Modeling Approach, Xichen Zhang

Doctoral Dissertations

"Underground mine fires have always been a major concern. Past events show that fire poses a severe safety hazard to mine workers, and causes tremendous economic loss to the mine and surrounding communities. A good understanding of the interaction between a mine fire and the mine ventilation network is crucial for effective fire emergency planning and hazard control. Unfortunately our understanding of a fire is still limited due to the complex nature of mine fires and a lack of adequate resource for studying them.

A new multiscale modeling approach coupling conventional 1D and 3D techniques has shown to be a …

Stress Corrosion Cracking Behavior Of Friction Stir Processed Ultrafine Grained Light Metal Alloys, Gaurav Ramchandra Argade

Doctoral Dissertations

"The influence of friction stir processing (FSP), a microstructural modification tool, on the corrosion behavior of Al-Mg, Al-Mg-Sc, Mg-Al-Zn and Mg-Y-RE alloys has been studied. An attempt has been made to establish correlation between processing parameters and the subsequent microstructural evolution especially matrix grain size on the corrosion and stress corrosion properties of the alloys. A relationship between grain size and corrosion rate for Mg-Y-RE alloys was envisaged and power law type behavior was proposed. Ultrafine fine grained (UFG) microstructure showed one order magnitude lower corrosion rate.

Grain refinement achieved through different FSP parameters showed lower corrosion currents for Al-Mg …

Modeling Carbon Sequestration In Transition Zone To Optimize Storage Potential, Fang Yang

Doctoral Dissertations

"Shallow aquifers are potential candidates for carbon sequestration because of their wide distribution and low injection cost. Injected CO₂ in a shallow region segregates into two zones according to CO₂ phases within the initial reservoir pressure and the maximum bottom hole pressure: gas zone and transition zone. Transition zone is a better option because of favorable CO₂ properties. This work investigated the CO₂ storage potential in transition zone using the compositional simulator CMG-GEM and a design of experiment software iSIGHT. First, it addressed the basic characteristics of CO₂ sequestration in transition zone, and then modeled CO₂ injection with simultaneous water …

Nitrification Performance Of Activated Sludge Under Low Dissolved Oxygen Conditions, Guoqiang Liu

Doctoral Dissertations

"The combined effects of solids retention time (SRT) and dissolved oxygen (DO) concentration on nitrification, nitrifying bacterial communities, and aeration needs in the activated sludge process were studied. Nitrification was almost completed in the 10, 20, and 40-day SRT reactors with a minimum DO of 0.37, 0.25, and 0.16 mg/L, respectively. Under long-term low DO conditions, the endogenous decay of nitrifiers was slowed down and then nitirfier biomass concentration increased, thereby reducing the adverse effect of low DO on nitrification. Under long-term low DO conditions, the oxygen affinity of nitrite-oxidizing bacteria (NOB) increased significantly and as a result, NOB became …

Introducing Porous Silicon As A Sacrificial Material To Obtain Cavities In Substrate Of Soi Wafers And A Getter Material For Mems Devices, Wajihuddin Mohammad

Doctoral Dissertations

Microelectromechanical system (MEMS) resonators have been a subject of research for more than four decades. The reason is the huge potential they possess for frequency applications. The use of a MEMS resonator as the timing element has an experimental history and huge progress has been made in this direction. Vacuum encapsulated MEMS resonators are required for high precision frequency control. Hence, a device with a high quality factor and durability is needed. In this effort, a new process for producing a cavity in the substrate of Silicon on insulator (SOI) MEMS devices and augmenting it with a getter using porous …

Computational Studies Of Ion Transport In Polymer Electrolytes, Hui Wu

Doctoral Dissertations

Improving ionic conductivity and lithium mobility in polymer electrolytes is important for their practical use for battery electrolytes. In this study, a combination of molecular dynamics and Monte Carlo simulations was used to bring insight into lithium ion transport in poly(ethylene oxide) (PEO) with plasticizers and also next to alumina solid surface doped with lithium salt. The simulations were performed using a moderately high molecular weight polymer (Mn = 10,000 g/mol) at an EO:Li ratio of 15. For the plasticized system, the PEO with LiN(CF3SO 2)2 (LiTFSI) was mixed with 10 wt% plasticizers that included either cyclic ethylene carbonate …

Experimental And Numerical Evaluation Of Cured In Place Pipe Lining System For High Temperature Applications In Sewer Pipes, Shaurav Z. Alam

Doctoral Dissertations

Some of the older cities across North America and Europe had been using steam driven HVAC systems since beginning of the last century. Consolidated Edison (Con Ed.) of New York operates the New York City steam system, the largest commercial district heating system in the world, with more than 100 miles of transmission and distribution pipes serving Manhattan Island. Other steam district systems exist in San Francisco, Harrisburg, Minneapolis, Pittsburgh, San Diego, and Detroit, some dating back to 1903. In those cities the sewer pipes are used as venues for discharging the waste steam condensate from the HVAC system.

The …

Role Of Ammonia In The Activiation Of Methanol Dehydrogenase/Cytochrome C(L) Enzyme, Ancy Kunjumon

Doctoral Dissertations

Recent advancement in enzyme catalysis has opened ways to design efficient biocatalysts, bio-sensors and bio-fuel cells. An in-depth knowledge about the mechanism of the reaction taking place within the enzymes is of great importance to achieve these goals. In this dissertation, various computation methods are applied to investigate the mechanism behind enzyme catalysis in the presence of compounds called activators.

Methanol dehydrogenase (MDH) is a well-known bio-catalyst that can oxidize excess of methanol from the environment to formaldehyde. The enzyme works well within the bacterial environment, but under in vitro, it loses activity. Ammonia is used as an activator …

Plasma-Activated Fusion Bonding For Vacuum Encapsulation Of Microdevices, Joel Soman

Doctoral Dissertations

A fabrication process for vacuum-encapsulating PZT microcantilevers was designed in this dissertation. Initially, a low temperature wafer-bonding recipe was optimized with the help of plasma-activation. Conventional direct fusion bonding temperature was reduced from 400°C to 85°C, and final thermal annealing temperature and time of 1000°C for 4 hours (hr) were significantly reduced to 300°C and 1 hr respectively. Tensile tests conducted on dies diced from the bonded wafer stack revealed bond strengths of 22.15 MPa, which was close to the bulk fracture strength of 24 MPa for silicon. Near infrared images of the wafer stack showed no debonded regions at …

Passive Micromixers And Organic Electrochemical Transistors For Biosensor Applications, Senaka Krishna Kanakamedala

Doctoral Dissertations

Fluid handling at the microscale has greatly affected different fields such as biomedical, pharmaceutical, biochemical engineering and environmental monitoring due to its reduced reagent consumption, portability, high throughput, lower hardware cost and shorter analysis time compared to large devices. The challenges associated with mixing of fluids in microscale enabled us in designing, simulating, fabricating and characterizing various micromixers on silicon and flexible polyester substrates. The mixing efficiency was evaluated by injecting the fluids through the two inlets and collecting the sample at outlet. The images collected from the microscope were analyzed, and the absorbance of the color product at the …

Modeling And Control For Heave Dynamics Of A Flexible Wing Micro Aerial Vehicle Distributed Parameter System, Lisa M. Kuhn

Doctoral Dissertations

In recent years, much research has been motivated by the idea of biologically-inspired flight. It is a conjecture of the United States Air Force that incorporating characteristics of biological flight into air vehicles will significantly improve the maneuverability and performance of modern aircraft. Although there are studies which involve the aerodynamics, structural dynamics, modeling, and control of flexible wing micro aerial vehicles (MAVs), issues of control and vehicular modeling as a whole are largely unexplored. Modeling with such dynamics lends itself to systems of partial differential equations (PDEs) with nonlinearities, and limited control theory is available for such systems.

In …