Engineering Commons^™

Analytical Solutions Of Openings Formed By Intersection Of A Cylindrical Shell And An Oblique Nozzle Under Internal Pressure, Hengming Cai

Dissertations

Since several decades ago, many authors have published their research results about local stress distributions of shells and shell-nozzles both analytically and numerically. However, there has not been a published paper, which deals with analytical solutions of cylindrical shell and oblique nozzle, even though in the case of openings formed by intersection of a cylindrical shell and an oblique nozzle.

A comprehensive analytical study of local stress factors at the area of openings formed by intersection of a cylindrical shell and an oblique nozzle under internal pressure is presented in this dissertation.

By means of traditional approach in theory of …

Adaptive Distributed Detection With Applications To Cellular Cdma, Jian-Guo Chen

Dissertations

Chair and Varshney have derived an optimal rule for fusing decisions based on the Bayesian criterion. To implement the rule, probabilities of detection P_D and false alarm P_F for each detector must be known, which is not readily available in practice. This dissertation presents an adaptive fusion model which estimates the P_D and P_F adaptively by a simple counting process. Since reference signals are not given, the decision of a local detector is arbitrated by the fused decision of all the other local detectors. Adaptive algorithms for both equal probable and unequal probable sources, for independent …

Synthesis And Characterization Of Lpcvd Sic Films Using Novel Precursors, Mahalingam Bhaskaran

Dissertations

A unique low pressure chemical vapor deposition (LPCVD) process has been developed to synthesize amorphous and crystalline SiC films using environmentally benign chemicals. The interrelationships governing the process variables, compositions and select properties of the resulting films were established. Such films can be used to produce high quality mask membrane for x-ray lithography. These films can also be used in fabricating high power electrical devices, and hetrojunction devices in conjunction with silicon.

Amorphous SiC films were synthesized using a single precursor, ditertiarybutylsilane, at temperatures below 850°C. Compositional analysis performed on these deposits revealed that, in the deposition temperature range of …

Bilinear Time-Frequency Representations Of Heart Rate Variability And Respiration During Stress, Rindala Saliba

Dissertations

Recently, joint time-frequency signal representation has received considerable attention as a powerful tool for analyzing a variety of signals and systems. In particular, if the frequency content is time varying as in signals of biological origin which often do not comply with the stationarity assumptions, then this approach is quite attractive. In this dissertation, we explore the possibility of better representation of two particular biological signals, namely heart rate variability (HRV) and respiration. We propose the use of time-frequency analysis as a new and innovative approach to examine the physical and mental exertion attributed to exercise. Two studies are used …

Two Dimensional Agonistic Control, Daqing Yang

Dissertations

The conventional method of precise multiple-axis motion control entails use of a multiple axis positioning system with each axis carrying not only the workpiece but also the positioning system of the remaining axes. The resultant structure is heavy, sluggish, and expensive. An alternative positioning technique is being investigated in which the motion of the workpiece is controlled by pulling it with tendons, each of which has its own actuator. Since the actuators can be mounted on the base of the structure instead of being carried by motion system of the other axes, they can be relatively large and powerful without …

Evaluation Of Environmental Characteristics Of Wtp Residuals For Disposal In Monofills, Ping Tian

Dissertations

Disposal of water treatment plant (WTP) have raised great concerns due to the stringent water quality standards and environmental regulations, and limited availability of land for ultimate disposal. The ultimate disposal of water treatment plant residuals by using monofill may be one of the most economical, and feasible options. Design and operation of such a monofill will be simple because of the uniformity of the characteristics of WTP residuals.

The objectives of this project were to determine the environmental characteristics of WTP residuals and to apply these characteristics for the design of monofills and development of the metal leaching model …

Counterpulsation Cardiac Assist Device Controller Defection Filter Simulation And Canine Experiments, Carl Edward Werner

Dissertations

Electronic control systems for counterpulsation Cardiac Assist Devices (CADs) are an essential part of cardiac assistance. Synchronization of the counterpulsation CAD controller with the cardiac cycle is critical to the efficacy of the CAD. The robustness of counterpulsation CAD controllers varies with the ability of the CAD controller to properly trigger on aortic pressure (Pa) and electrocardiogram (ECG) signals for sinusoid rhythms, non-sinusoid rhythms and non-ideal signals resulting from surgical intervention. An analog-to-digital converter and digital-to-analog converter based CAD controller development platform was devised on a 33Mhz PC-AT.

Counterpulsation Pa systolic rise and dicrotic notch detectors were demonstrated with a …

Non-Linear Evaluation Of Concrete-Filled Steel Tubular Columns, Mohammad Hassan Shams

Dissertations

Concrete-filled steel tubular (CFT) columns have become increasingly popular in structural applications due to their high strength, high ductility, and large energy absorption capacity. These structural properties are the result of integral behavior of the concrete core and the steel tube. This research provides an analysis of the interaction of the concrete core and the steel tube in CFT columns.

While there have been many experimental studies of CFT columns, there has been no analytical work modeling the confining effect of the steel tube on the concrete core. Furthermore, current design procedures tend to underestimate the ultimate strengths of CFTs …

Shaped Charges Having A Porous Tungsten Liner-An Experimental And Theoretical Study Of Metal Compression, Jet Formation And Penetration Mechanics, Brian Edward Fuchs

Dissertations

The use of porous tungsten as a liner for shaped charges to improve their penetration was proposed by Ki-Hwan Oh in his invention disclosure "Shock Extrusion of Ingots from Powders or Solids", at the New Mexico Institute of Mining and Technology, Socorro NM on June 7, 1988. The intention was to increase the ductility of the normally brittle metal by heating the liner to a high temperature by shock compaction during its acceleration just before jet formation.

The feasibility of increasing the ductility of tungsten in this way is the subject of the present study. The theory and prior experimental …

Fracture Mechanics Of High Strength Concrete Members, Rajendra K. Navalurkar

Dissertations

This study investigates the behavior of High Strength Concrete (HSC) under uniaxial state of stresses. Emphasis is placed on experimental evaluation of important mechanical and fracture properties. Owing to high brittleness of HSC, experimental results especially on tensile behavior have been largely limited and scarce. In this research, direct uniaxial tension tests are employed for determination of the post-peak tensile softening characteristics of HSC. The softening characteristics of high strength concrete is found to be considerably different than that of normal strength concrete (NSC). Fracture energies evaluated form the descending branch of the stress softening reveal significant drop in the …

A Controlled Release Technique Using Microporous Membranes, Stephanie Farrell

Dissertations

A novel controlled release device based on aqueous-organic partitioning is described. The device comprises a reservoir, bounded by a microporous or porous membrane in the form of a hollow fiber or flat film. The reservoir liquid phase and the pore liquid phase are immiscible. The agent partitions between the phases at the aqueous-organic interface of the reservoir and the pore mouth, and then diffuses through the membrane pore liquid into a surrounding aqueous solution. The partition coefficient significantly influences the rate of release of the agent by reducing the driving force for diffusion across the fluid-filled membrane pore. The performance …

Vapor-Liquid Phase Equilibria Of Nonideal Fluids With A Ge-Eos Model, Socrates Ioannidis

Dissertations

This study dealt with the prediction and correlation of vapor-liquid equilibria behavior of nonideal fluids. The thermodynamic formalism of the G^E-EoS models, which combines the two traditional methods γ-Φ and Φ-Φ used so far for low and high pressure phase equilibria correlations respectively, has been combined with the 1FG^E model, based on one-fluid theory, to produce a more consistent approach to the phase equilibrium problem.

In the first part of our study we examine the predictive abilities of our model for vapor-liquid equilibria of highly nonideal fluids. The results establish the fact that the Huron-Vidal mixing rule …

Local Stresses On Lateral Pipe-Nozzle With 45 Degree Angle Intersection, James Jin Xu

Dissertations

This dissertation presents a comprehensive study of local stresses, due to internal pressure around a pipe-nozzle with 45 degree angle intersection_ The resulting circumferential and longitudinal stresses on the pipe around the pipe-nozzle region are normalized as local stress factors and plotted as function of beta, β, (the radius of the nozzle/the radius of the pipe) and gamma, y, (the radius of the pipe/the thickness of the pipe) through the finite element method. The range of beta, [3, is from 0.1, to 1.0, and gamma, y, from 10 to 300. Comprehensive studies were made for the boundary parameters, such as …

Motion Estimation And Video Coding, Xiaochun Xia

Dissertations

Over the last ten years. research on the analysis of visual motion has come to play a key role in the fields of data compression for visual communication as well as computer vision. Enormous efforts have been made on the design of various motion estimation algorithms.

One of the fundamental tasks in motion estimation is the accurate measurement of 2-D dense motion fields. For this purpose. we devise and present in this dissertation a multiattribute feedback computational framework. In this framework for each pixel in an image. instead of a single image intensity. multiple image attributes are computed as conservation …

Scheduling And Discrete Event Control Of Flexible Manufacturing Systems Based On Petri Nets, Huanxin Henry Xiong

Dissertations

A flexible manufacturing system (FMS) is a computerized production system that can simultaneously manufacture multiple types of products using various resources such as robots and multi-purpose machines. The central problems associated with design of flexible manufacturing systems are related to process planning, scheduling, coordination control, and monitoring. Many methods exist for scheduling and control of flexible manufacturing systems, although very few methods have addressed the complexity of whole FMS operations. This thesis presents a Petri net based method for deadlock-free scheduling and discrete event control of flexible manufacturing systems. A significant advantage of Petri net based methods is their powerful …

Study Of Stress In Microelectronic Materials By Photoelasticity, Hancheng Liang

Dissertations

The study of stress is playing an important role in microelectronic technology. In comparison with other techniques, the photoelasticity technique has the advantages of having high spatial resolution and high sensitivity. It can be used in qualitative observation in real-time and quantitative determination of stress distribution in the microelectronic materials and devices.

This dissertation presents a systematic study of photoelastic stress analysis in microelectronic materials and devices, ranged from theoretical study to practical system setup, from measurement methods to their applications. At first, based on the detailed survey on the piezo-optic properties of the crystals used in microelectronics, we apply …

Reaction Kinetics Of Methanol And Mtbe Oxidation And Pyrolysis, Wen-Chiun Ing

Dissertations

This study presents experimental data on the decomposition of methanol in several different reaction environments - fuel lean to stoichiometric at a temperature range of 873 and 1073 K and a pressure range of I and 5 atm. Methane fuel is also added in several of the systems studied in order to provide experimental data to understand the methanol addition effect on the methane oxidation.

Computer codes: ThermCal, ThermSrt and ThermCvt have been developed for the thermal property calculations of stable molecules by the Benson group additivity method and of radicals by the NJIT hydrogen bond increment method.

Pressure dependent …

Experimental And Analytical Investigation Of Waterjet Cleaning Process, Ping Meng

Dissertations

This doctoral dissertation is concerned with the development of water based cleaning technology required by industry which may substitute the traditional approach based upon the use of various chemical cleansers.

The experimental study involves the waterjet removal of various coatings (rust, oil and epoxy based paints, etc.). Cleaning was carried out under a wide range of operational and geometrical conditions (standoff distance, travel speed, water pressure, diameters of sapphire nozzle and focusing tube, nozzle body type). A new designed spiral nozzle body was tested in this work. The use of surfactant was also investigated. Microscope and SEM surface were used …

Characterization And Fabrication Of A (6h)-Sic As A Piezoresistive Pressure Sensor For High Temperature Applications, Robert Sylvester Okojie

Dissertations

A prototype monolithic 6H-SiC pressure sensor operational up to 350°C, with potential to operate up to 600°C, was batch fabricated and tested. At temperatures higher than 450°C, silicon diaphragms creep under minimal load. To operate beyond 450°C, therefore, the use of 6H-SiC was proposed. However, three key technological issues - fabrication, high temperature metallization, and gage factor characterization - had to be resolved. Since conventional fabrication technology is not applicable to SiC due to its near inert chemistry, photoconductive selectivity techniques to etch the piezoresistors were developed. Techniques to wet etch the cavities in a dark current mode were developed, …

Experimental And Numerical Investigation Of Abrasive Waterjet Polishing Technology, Fenggang Li

Dissertations

The objective of this investigation is the development of the abrasive waterjet (AWJ) based polishing technology. The result of the investigation will assist the implementation of AWJ polishing for manufacturing processes and procedures.

Experimental exploration of AWl polishing involving processing of difficultmachine materials such as Alumina ceramic and stainless steel. Surface improvement due to this processing is evaluated by measuring the roughness of the generated surfaces and examining the microhardness and micro-topography of the surfaces using Scanning Electronic Microscopy (SEM). The surface roughness of 0.3 micron was obtained at samples of ceramic and metal alloys at a reasonable rate using …

The Constant Fracture Angle Model For Cementitious Materials, Suk Ki Kim

Dissertations

Fracture mechanics of concrete has been investigated for the past two decades using linear elastic and nonlinear fracture mechanics concepts. The models proposed so far remain questionable largely due to specimen dependency of the proposed fracture parameters.

In this study, a new approach for modeling the fracture characteristics of concrete and fiber reinforced concrete is proposed. The model depends on the load CMOD relationship rather than the traditional load-deflection principle. Although energy consumed during fracture is definitely a direct function of the load displacement response, it was observed that traditional displacement measurement included an extraneous and erratic portion due to …

Emulsion Liquid Membrane Removal Of Arsenic And Strontium From Wastewater : An Experimental And Theoretical Study, Ding-Wei Zhou

Dissertations

The emulsion liquid membrane (ELM) technique has been successfully applied on the removal of arsenic (As) from metallurgical wastewater and the removal of strontium (Sr) horn radioactive wastewater. This study consisted of experimental work and mathematical modeling.

Extraction of arsenic by an emulsion liquid membrane was firstly investigated. The liquid membrane used was composed of 2-ethylhexyl alcohol (2EHA) as the extractant, ECA436OJ as the surfactant, and Exxsol D-8O solvent (or heptane) the diluent. The sulfuric acid and sodium hydroxide solutions were use I as the external and internal phases, respectively. The arsenic removal efficiency reached 92% within 15 minutes in …

Explicit Congestion Control Algorithms For Available Bit Rate Services In Asynchronous Transfer Mode Networks, Ambalavanar Arulambalam

Dissertations

Congestion control of available bit rate (ABR) services in asynchronous transfer mode (ATM) networks has been the recent focus of the ATM Forum. The focus of this dissertation is to study the impact of queueing disciplines on ABR service congestion control, and to develop an explicit rate control algorithm.

Two queueing disciplines, namely, First-In-First-Out (FIFO) and per-VC (virtual connection) queueing, are examined. Performance in terms of fairness, throughput, cell loss rate, buffer size and network utilization are benchmarked via extensive simulations. Implementation complexity analysis and trade-offs associated with each queueing implementation are addressed. Contrary to the common belief, our investigation …

Design, Process And Performance Simulation Of A 360x360-Element Very High Frame Rate Burst-Image Sensor, Guang Yang

Dissertations

A process was developed for fabrication of 360x360-element Very High Frame Rate (VHFR) burst-image sensor on the bases of one-dimensional (1-D) and two-dimensional (2-D) device and process simulations using SUPREM III, SUPREM IV, PISCES IIB and ISE-TCAD software, and the process data provided by the David Sarnoff Research Center. This process includes SiO₂-Si₃N₄ gate dielectric, four-levels of polysilicon, three-levels of metal, eight implants, and requires twenty-one mask levels. The imagers with a 2-cmx2-cm chip size were fabricated at the David Sarnoff Research Center. The VHFR burst-image sensor is capable of capturing images at frame rates …

Global Fuzzy Control Based On Cell Mapping, Tea-Quin Kim

Dissertations

Cell mapping methods can generate global optimal controls for nonlinear dynamic systems. However, the implementation of this approach for on-line control is difficult due to its use of a table-based controller which requires a large amount of memory.

In this dissertation, a cell mapping based systematic method is developed to construct a fuzzy controller to replace the table-based controller for global optimal control of dynamic systems. The method consists of four steps: 1) An optimal control table is generated using a cell mapping algorithm. 2) The cells are linked into trajectories to characterize the optimal dynamic evolution of various cell. …

Development Of A Traffic Safety Index For Urban Intersections, Jae-Hong Kang

Dissertations

Conventional safety analysis focuses on the accident environment at specific locations or a limited segment of highways or arterials, and attempts to identify the effects of accident contributing factors. The development of a safety index in the past was based on a statistical summary for county or statewide areas, using general indicators such as population, number of registered vehicles, vehicle miles traveled and so on. This research effort presents a state-of-the-art procedural analytical approach for the safety analysis of Manhattan intersections that are exposed to a unique urban environment. The computed index provides safety ratings that can identify potential safety …

Development Of A Multivariate Qsar Model To Predict Desorption Of Halogenated Aliphatic Hydrocarbons From Activated Sludge Solids, Sudhi Ranjan Mukherjee

Dissertations

Data collected from different wastewater treatment processes have provided statistically significant evidence that many toxic organic contaminants on EPA's list of priority pollutants concentrate several orders of magnitude greater than influent concentrations in industrial and municipal wastewater sludges. Because of the reversibility of sorption processes, it is possible for sorbed organic compounds to desorb at a later time, hence making disposal of these sludges a potential problem. Although a number of models have been developed to predict sorption parameters, they have all been based on empirically derived descriptors whose validity is seriously compromised by the variation in available data for …

A Full Wave Method For Rough Surface Scattering Using Fictitious Current Distributions, Anthony A. Triolo

Dissertations

Rough surface scattering is a current topic of interest in many diverse fields. But, despite its importance, the two most widely used solution methods, the Kirchhoff and first order perturbation methods, are valid only for a restricted range of surface types. There is a large range of surface statistics for which neither of these theories is valid. There are purely numerical solutions to the problem, i.e., the integral equation technique and FDTD method, but these methods require a prohibitively large amount of computer time and storage space for use in practical applications. A full wave method has been introduced by …

Reduction Of Inertia-Induced Forces In A General Spatial Mechanism, Sahidur Rahman

Dissertations

A computer-aided design procedure has been developed for minimizing the adverse effects of the inertia-induced forces by optimum mass redistribution amongst the links of high speed general spatial linkages. The evaluation of an optimality criterion for the mass redistribution of the mechanism will be carried out with the aid of a quadratic programming technique. This has been found to be successful in minimizing inertia induced forces and torques. The validity of the optimization procedure will be demonstrated by application to one kind of spatial linkage.

No literature has been found on the balancing of a general spatial mechanism, since its …

Discrete Element Modeling Of Dry Granular Material Using A Massively Parallel Supercomputer, David W. Washington

Dissertations

It is the state-of -the-art within Geotechnical Engineering to model soils as systems of particles rather than using the traditional continuum approach. Simulating these systems of particles for geotechnical boundary value problems results in systems which are of necessity large, motivating the application of massively parallel supercomputers. This thesis pursues such an approach.

The following work describes numerical experiments using a Discrete Element Method (DEM) paradigm for soils (Trubal) together with massively parallel computers with Single Instruction Multiple Data (SIMD) architecture. The discrete element method describes the behavior of granular assemblies using the classical mechanics of discrete bodies. The computational …