Engineering Commons^™

Channel Estimation And Signal Enhancement For Ds-Cdma Systems, Kun Wang

Dissertations

This dissertation focuses on topics of Bayesian-based multiuser detection, space-time (S-T) transceiver design, and S-T channel parameter estimation for direct-sequence code-division multiple-access (DS-CDMA) systems.

Using the Bayesian framework, various linear and simplified nonlinear multiuser detectors are proposed, and their performances are analyzed. The simplified non-linear Bayesian solutions can bridge the performance gap between sub-optimal linear multiuser detectors and the optimum multiuser detector.

To further improve the system capacity and performance, S-T transceiver design approaches with complexity constraint are investigated. Novel S-T receivers of low-complexity that jointly use the temporal code-signature and the spatial signature are proposed. Our solutions, which lead …

An Experimental Study Of Dry Particle Coating : Devices, Operating Parameters And Applications, Michelle Ramlakhan Mohan

Dissertations

Dry particle coating, which mechanically coats fine guest particles onto the surfaces of larger host particles, without binders or solvents, is investigated. Several systems of host and guest particles are coated in different devices to study various aspects of dry particle coating. The devices used are Magnetically Assisted Impaction Coating (MAIC) device, Mechanofusion, and the Hybridizer.

MAIC is used to coat fine SiO₂ guest particles onto the surface of larger cornstarch and cellulose host particles. This is done to simultaneously improve the flowability of the host particles, as well as reduce their hydrophilicity. Dry particle coating is used to …

Modeling, Design And Scheduling Of Computer Integrated Manufacturing And Demanufacturing Systems, Ying Tang

Dissertations

This doctoral dissertation work aims to provide a discrete-event system-based methodology for design, implementation, and operation of flexible and agile manufacturing and demanufacturing systems. After a review of the current academic and industrial activities in these fields, a Virtual Production Lines (VPLs) design methodology is proposed to facilitate a Manufacturing Execution System integrated with a shop floor system. A case study on a back-end semiconductor line is performed to demonstrate that the proposed methodology is effective to increase system throughput and decrease tardiness. An adaptive algorithm is proposed to deal with the machine failure and maintenance. To minimize the environmental …

Transit Productivity Analysis In Heterogeneous Conditions Using Data Envelopment Analysis With An Application To Rail Transit, Manuel J. Martinez

Dissertations

This dissertation extends transit productivity analysis by developing a new method of Data Envelopment Analysis (DEA), the linear programming approach to productivity analysis. The new model analyzes productivity of transit working under heterogeneous operating conditions. It is named Two-Farrell DEA for it applies DEA in two stages, DEA (1), that calculates the productivity frontiers at given operating conditions and DEA (2), that uses inputs adjusted by multipliers calculated in DEA (l). The model Two Farrell DEA calculated productivity benchmarks for each rail transit agency and estimated its potential for higher revenue or lower expense improvement. Additionally, the results identify two …

Joint Source Channel Coding For Progressive Image Transmission, Minyi Zhao

Dissertations

Recent wavelet-based image compression algorithms achieve best ever performances with fully embedded bit streams. However, those embedded bit streams are very sensitive to channel noise and protections from channel coding are necessary. Typical error correcting capability of channel codes varies according to different channel conditions. Thus, separate design leads to performance degradation relative to what could be achieved through joint design. In joint source-channel coding schemes, the choice of source coding parameters may vary over time and channel conditions. In this research, we proposed a general approach for the evaluation of such joint source-channel coding scheme. Instead of using the …

Predicting Thermodynamic And Transport Parameters For Metal Contaminant Sorption To Hydrated Metal Oxides In Aquatic Systems, Paras Trivedi

Dissertations

Hydrated oxides such as HAO,'HFO, goethite, and BA40 are prevalent in soils and sediments as discrete particles or as coatings. These microporous oxides have large surface areas and high affmity for metal ions, and hence they act as both a sink and a source for anthropogenically released metal contaminants. To better understand risks posed by metals in the environment and to develop effective waste management programs, mechanistic models are needed to accurately predict their fate in soils and sediments.

To achieve this objective, sorption of metal ions Sr, Cd, Zn, Ni, and Ca to these oxides were studied with macroscopic …

Novel Multiuser Detection And Multi-Rate Schemes For Multi-Carrier Cdma, Pingping Zong

Dissertations

A large variety of services is [sic] expected for wireless systems, in particular, high data rate services, such as wireless Internet access. Users with different data rates and quality of service (QoS) requirements must be accommodated. A suitable multiple access scheme is key to enabling wireless systems to support both the high data rate and the integrated multiple data rate transmissions with satisfactory performance and flexibility. A multi-carrier code division multiple access (MC-CDMA) scheme is a promising candidate for emerging broadband wireless systems. MC-CDMA is a hybrid of orthogonal frequency division multiplexing (OFDM) and code division multiple access (CDMA). The …

Plasma Induced Damage To Si And Sige Devices And Materials, Wei Zhong

Dissertations

This thesis studied the plasma-induced damage to Si and strained Si_1-xGe_x, and the resulting change in device characteristics. The energetic particles (ions, electrons and photons) in plasma reactor present a potentially hostile environment for processing VLSI devices. An inductively coupled plasma (ICP) reactor was used to study its damage effects to thin gate oxides. Electrical characterizations by C-V, ramped voltage breakdown (RVB) and deep-level transient spectroscopy (DLTS) measurement, and x-ray photoelectron spectroscopy (XPS) analysis were employed to investigate the damages to thin gate oxides and Si/SiO₂ interface. The shift of flat band voltage, the reduction …

Designing Web-Based Adaptive Learning Environment : Distils As An Example, Lilian Cao

Dissertations

In this study, two components are developed for the Web-based adaptive learning: an online Intelligent Tutoring Tool (ITT) and an Adaptive Lecture Guidance (ALG). The ITT provides students timely problem-solving help in a dynamic Web environment. The ALG prevents students from being disoriented when a new domain is presented using Web technology. A prototype, Distributed Intelligent Learning System (DISTILS), has been implemented in a general chemistry laboratory domain.

In DISTILS, students interact with the ITT through a Web browser. When a student selects a problem, the problem is formatted and displayed in the user interface for the student to solve. …

Performance Analysis And Resource Allocation In Cdma Wireless Networks For Multimedia Services, Sebnem Zorlu

Dissertations

The proliferation of Internet and demand for wireless services necessitate large increases in capacity and data rates in order to support different multimedia services. Wireless systems will be required to support sources with a variety of traffic characteristics and quality of service requirements. This requires algorithms for admission control and resource allocation at the session, burst and packet levels. The purpose of this research is to develop and analyze optimal resource allocation strategies to maximize throughput of wireless systems with integrated services. Given the multimedia user requirements, the problem addressed can be formulated as a constrained optimization problem. The objective …

Immobilized Liquid Membranes For Facilitated Transport And Gas Separation, Anjaneya Sarma Kovvali

Dissertations

Separation and purification of gas mixtures is a major area of activity in chemical engineering. Gas separation using facilitated transport membranes has been the subject of considerable research for many years. Immobilized liquid membranes (ILMs) are an important class of facilitated transport membranes. Despite their potential to provide superior performance, they could not achieve commercial success so far due to their instability. Recent research addressed the issue of stability of ILMs by replacing water as the solvent successfully with glycerol. In the present thesis, the relevance of glycerol as an ideal solvent for developing stable ILMs is demonstrated using the …

Buffer Management And Cell Switching Management In Wireless Packet Communications, Jongho Bang

Dissertations

The buffer management and the cell switching (e.g., packet handoff) management using buffer management scheme are studied in Wireless Packet Communications.

First, a throughput improvement method for multi-class services is proposed in Wireless Packet System. Efficient traffic management schemes should be developed to provide seamless access to the wireless network. Specially, it is proposed to regulate the buffer by the "Selective- Delay Push-In (SDPI)" scheme, which is applicable to scheduling delay-tolerant non-real time traffic and delay-sensitive real time traffic. Simulation results show that the performance observed by real time traffics are improved as compared to existing buffer priority scheme in …

Microporous Polymeric Membranes Via Melt Processing, Chaiya Chandavasu

Dissertations

Novel ultraporous and microporous membranes from immiscible polymer blends were produced via melt processing and post-extrusion treatments. Polystyrene (PS)/polypropylene (PP) and poly(ethylene terephthalate) (PET)/polypropylene (PP) blend systems with different rheological properties were studied. The blends were first compounded in an intermeshing co-rotating twin-screw extruder and subsequently extruded through a sheet die to obtain the precursor films. These were post treated by uniaxial or biaxial deformation (100-500%) with respect to original dimensions to induce a microporous structure. The porosity is induced by drawing the precursor film at a temperature below the glass transition temperature (T_g) of the minor …

A Software System For Large-Scale Structural Optimization, Keith M. Macbain

Dissertations

This work is driven by recent developments in mathematical programming, the state-of-the-art of structural optimization, the spectacular performance of linear programming algorithms, and computer hardware developments which imply that applications of structural optimization might be used commonly in engineering design. Currently, there are few general purpose optimization routines available to the structural engineer and much of the work has addressed specific classes of problems. Further, there is little widespread use of the available routines, partly due to the large amount of familiarity one must have with the specific details of both the problem and the optimization method. In response, it …

Force And Effort Analysis Of Unfastening Actions In Disassembly Processes, Manuela Sonnenberg

Dissertations

Fastening is the process of connecting one or more parts together with the aid of fastening elements. Unfastening, the reverse of fastening, is the process of separating components from each other by removing or detaching fastening elements. So far, the unfastening process is not well understood, and the analysis about it is not very extensive.

However, the need for disassembly is currently increasing. First, parts have to be taken apart for service and repair, and secondly, for the recycling process. Therefore, there is a need to consider unfastening during the design process in order to enable efficient disassemblies.

The purpose …

Design Of Traffic Shaper / Scheduler For Packet Switches And Diffserv Networks : Algorithms And Architectures, Surong Zeng

Dissertations

The convergence of communications, information, commerce and computing are creating a significant demand and opportunity for multimedia and multi-class communication services. In such environments, controlling the network behavior and guaranteeing the user's quality of service is required. A flexible hierarchical sorting architecture which can function either as a traffic shaper or a scheduler according to the requirement of the traffic load is presented to meet the requirement. The core structure can be implemented as a hierarchical traffic shaper which can support a large number of connections with a wide variety of rates and burstiness without the loss of the granularity …

Study Of Automotive Hydromount Mechanism, Min Lu

Dissertations

The hydromount mechanism is studied. It was determined that the dynamic characteristics of the hydromounts are related to the rubber static stiffness, rubber damping coefficient, volumetric stiffness, and effectiveness of the oscillating fluid in the inertia track. At high frequencies the motion of the fluid in the inertia track diminishes so that its effect is negligible and may be ignored. It is also concluded that the rubber damping has a minimal effect on the hydromount dynamic properties and may be neglected. The maximum loss angle, which corresponds to the maximum damping coefficient of the hydromount, occurs near the inertia track …

Enhancing Commercial Aircraft Survivability Via Active Venting, Roger L. Veldman

Dissertations

A new technique for enhancing aircraft safety in the event of an on-board explosion was studied. The method under study employs deployable vent panels located on the fuselage which are activated by an array of pressure sensors in the aircraft interior. In the event that an explosion is detected, appropriate vent panels are rapidly released from the aircraft. This approach seeks to provide timely relief of explosive pressures within an aircraft to prevent catastrophic structural failure.

In this study, the approximate time scale of an explosive detonation and the subsequent sensing and electronic processing was determined. Then, the actuation response …

Video Indexing And Summarization Using Motion Activity, Kadir Askin Peker

Dissertations

In this dissertation, video-indexing techniques using low-level motion activity characteristics and their application to video summarization are presented. The MPEG-7 motion activity feature is defined as the subjective level of activity or motion in a video segment. First, a novel psychophysical and analytical framework for automatic measurement of motion activity in compliance with its subjective perception is developed. A psychophysically sound subjective ground truth for motion activity and a test-set of video clips is constructed for this purpose. A number of low-level, compressed domain motion vector based, known and novel descriptors are then described. It is shown that these descriptors …

Phase-Locked Loop, Delay-Locked Loop, And Linear Decorrelating Detector For Asynchronous Multirate Ds-Cdma System, Sok-Kyu Lee

Dissertations

The performance of phase synchronization and code tracking of a digital phase-locked loop (PLL) and delay-locked loop (DLL), respectively, is investigated in wideband asynchronous multirate DS-CDMA system. Dynamic Partial Correlation (DPC) method is proposed to evaluate the autocorrelation and its power spectrum density (PSD) of the cross-correlated terms in the presence of multirate multiple access interference (MMAI) under additive white gaussian noise (AWGN) and fading channel environments. The steady-state probability density function (PDF) and variance of the phase estimator error and code tracking jitter is evaluated by solving the first-order Fokker-Planck equation.

Among many linear multiuser detectors which decouple the …

Resource Allocation For Cdma Downlink To Achieve Maximum Throughput, Anil Bircan

Dissertations

Growing interest in cellular phones, wireless modems, instant messaging, pagers with the increasing use of the Internet in daily life indicate that wireless high speed Internet access and wireless multimedia applications are in great demand. The barrier to satisfy this demand is the provision of sufficiently high bit rates in severe wireless mobile channel conditions, for a multitude of services, each requiring different and perhaps even time-varying quality of services (QoS) that can be more demanding than the QoS required by today's voice service. New generation systems will enable provision of a multitude of services each with different QoS and …

Numerical Stimulation Of Stress-Induced Crystallization Of Injection Molded Semicrystalline Thermoplastics, Jianxin Guo

Dissertations

Injection molded semicrystalline plastic products exhibit variable morphology along their thickness directions. The processing conditions have a significant effect on the crystallinity distribution in the final parts. However, because of the lack of sound theoretical models for stress-induced crystallization kinetics in thermoplastics, simulations of the injection molding process of semicrystalline plastics with the consideration of stress-induced crystallization have been scarce.

A stress-induced crystallization model for semicrystalline plastics is proposed based on the theory that stress induced orientation of polymer chains increase the melting temperature of the plastics, and hence, the supercooling which is the driving force for crystallization. By assuming …

Numerical Modeling And Optimization Of Waterjet Based Surface Decontamination, Konstantin Babets

Dissertations

The mission of this study is to investigate the high-pressure waterjet based surface decontamination. Our specific objective is to develop a practical procedure for selection of process conditions at given constraints and available knowledge. This investigation is expected to improve information processing in the course of material decontamination and assist in the implementation of the waterjet decontamination technology into practice. The development of a realistic procedure for processing of a chaotic and non-accurate information constitutes the main accomplishment of this study.

The research involved acquisition of representative information about removal of brittle, elastic and viscous deposits. As a result an …

Empirical Model-Based Control For End Milling Process, Abdelmalak Salib

Dissertations

The main objective of this research is to develop an empirical model-based control mechanism to maintain a fine surface finish quality by maintaining on-line cutting force values. The proposed model has been developed to present the control model constraints, by varying the machining parameters to control the force output to be constant. To relate the surface finish and the cutting force in the end milling machining process, a design of experiment has been conducted to determine the effect of two different materials (aluminium and steel) and the machining parameters (feed rate, spindle speed) at a predefined depth of cut.

Regression …

Electro-Magnetic Control Of Cylinder Wake, Zhihua Chen

Dissertations

The objective of this dissertation is to develop open and closed-loop control algorithms for manipulating wake flows past a solid cylinder in an electrically low-conducting fluid (e.g. seawater). The intent is to avoid both vortex shedding and flow separation from the body. It is desired to reduce the mean drag significantly and prevent the lift from becoming non-zero at all times. This is achieved through the introduction of a Lorentz force in the azimuthal direction generated by an array of permanent magnets and electrodes located on the solid structure. The array of actuators offers the advantage of making the Lorentz …

Nonlinear Optical Properties Of Nano Structures, Mahesh U. Ajgaonkar

Dissertations

Nonlinear optical properties of nanoscale semiconductors had been a topic of intense research in recent years in attempts to realize all-optical communication systems. These semiconductor nanoclusters, in the range of 1-100nm are hosted in a dielectric material and are considered as a particular example of Conditional Artificial Dielectric (CAD). It has been reported that the dielectric properties of such materials will be greatly changed by light intensity.

Two main paths to realize nano semiconductor clusters are reported in this dissertation. The Pulsed Laser Deposition (PLD) technique is first described. Here we were investigating the effect of surface modification of nano …

Assessing The Economic Impact Of Aircraft Noise On Communities, Ithan B. Zimmer

Dissertations

The impact of aircraft noise on communities is complex and multi-dimensional. This matter cannot be resolved without careful analysis of a complex array of related problems and issues including the environment, the economy, and quality-of-life concerns of people living in proximity to airports or aircraft routes. The effects of community noise are widespread and varied. Impacts can include sleep and speech interference, activity interference, general annoyance, and property value decrease. In order to improve public policy and provide a foundation for additional research, it is imperative to establish the extent of a problem. Dollars are often the least common denominator …

Kinematic Synthesis Of Adjustable Spatial Four And Five-Bar Mechanisms For Finite And Multiply Separated Positions, Kevin Russell

Dissertations

Although spatial mechanisms are more general in structure than planar mechanisms, their applications are few due to the limited number of practical design tools and the complexity of those available. It is in fact the task of the future to develop effective, but practical design tools for spatial mechanisms.

This research presents several new methods for synthesizing adjustable spatial mechanisms. The first method involves the kinematic synthesis of spatial mechanisms for multiphase motion generation. Using this method, spatial four and five-bar mechanisms can be synthesized to achieve different phases of prescribed rigid body positions. The theory of this approach has …

Interference Suppression And Diversity For Cdma Systems, Xiaodong Cai

Dissertations

In code-division multiple-access (CDMA) systems, due to non-orthogonality of the spreading codes and multipath channels, the desired signal suffers interference from other users. Signal fading due to multipath propagation is another source of impairment in wireless CDMA systems, often severely impacting performance. In this dissertation, reduced-rank minimum mean square error (MMSE) receiver and reduced-rank minimum variance receiver are investigated to suppress interference; transmit diversity is applied to multicarrier CDMA (MC-CDMA) systems to combat fading; packet combing is studied to provide both interference suppression and diversity for CDMA random access systems.

The reduced-rank MMSE receiver that uses a reduced-rank estimated covariance …

Analysis And Control Of Monolithic Piezoelectric Nano-Actuator, Xuemei Sun

Dissertations

The study of the monolithic piezoelectric actuator, the dominant type of micropositioner is an attractive and challenging area, where realtime control theory and digital signal processing are effectively applied. The actuator can be applied in precision instruments and precision control, such as microscopes, medical and optics instruments because of the piezoelectric ceramic's high resolution, fast transient response, and potential low cost. However, hysteresis nonlinearity and lightly damped vibration exist in the system, which limit the actuator applications.

This work focuses on the hysteresis characteristics in time and frequency domains along with experimental and simulated results to verify the effectiveness of …