Engineering Commons^™

Professional Skills Portfolio For A Progressive Engineering Education, Dermot Mcgarthy, David Kennedy

Articles

At the 2013 launch of the return to work scheme, “Springboard” in Dublin, it was stated that employers were seeking staff with enhanced language, presentation, communication, coping, and team-working skills. Graduates without these skills were finding it more difficult to gain permanent employment and were more likely to find themselves out of work unless they developed these skills. Enhancing personal development skills in education requires a revision of existing programmes. Not alone will these skills open new doors of opportunity for those who have lost their jobs during the recession, but should help sustain them going forward. The education of …

Estimating The Wind Resource In An Urban Area: A Case Study Of Micro Wind Generation Potential In Dublin, Ireland, Keith Sunderland, Gerald Mills, Michael Conlon

Articles

The micro-turbine wind market in cities faces significant challenges due to the complexities associated with the urban terrain but, if a renewable solution to increasing energy demand is to be achieved, energy conversion systems where populations are concentrated, that is cities, must be considered. This research evaluates the urban wind resource by employing a physically-based empirical model to link wind observations at a conventional meteorological site to those acquired at urban sites. The approach is based on urban climate research that has examined the effects of varying surface roughness on the wind-field between and above buildings. Here, this is applied …

Thermal Performance Analysis Of A Solar Water Heating System With Heat Pipe Evacuated Tube Collector Using Data From A Field Trial, Lacour Ayompe, Aidan Duffy

Articles

This paper presents an analysis of the thermal performance of a solar water heating system with heat pipe evacuated tube collector using data obtained from a field trial installation over a year in Dublin, Ireland. An automated sub‐system was developed and incorporated to control the hot water draw‐offs and electric immersion heater to mimic the operation of solar water heating systems in domestic dwellings. The maximum recorded collector outlet fluid temperature was 70.3^oC while the water temperature at the bottom of the hot water tank was 59.5^oC. The annual average daily energy collected was 20.4 MJd …

Detecting Point-Like Sources Of Unknown Frequency Spectra, Raffaele Solimene, Giuseppe Ruvio, Angela Dell’Aversano, Antonio Cuccaro, Max Ammann, Rocco Pierri

Articles

The problem of detecting point-like sources whose frequency spectrum is unknown is addressed. Limitations of single-frequency approaches are identified by analytical as well as numerical arguments. To overcome these limits, different multifrequency approaches which combine frequency data incoherently are compared. In particular, a novel multifrequency MUSIC-like algorithm based on interferometric concepts is proposed. Results show that the algorithm outperforms other methods under comparison.

Integrating Emotional Attachment And Sustainability In Electronic Product Design, Alex Lobos, Callie W. Babbitt

Articles

Current models for Information and Communication Technology (ICT) products encourage frequent product replacement with newer versions that offer only minor incremental improvements. This pattern, named planned obsolescence, diminishes user experience and shortens product lifespan. This paper presents the conceptual basis for a two-part integrated approach to combating planned obsolescence in ICT devices. First, design for emotional attachment, which creates products that users enjoy, value, and use for longer. Second, technological adaptability, which anticipates product upgrades and repairs as new technologies emerge. A model interdisciplinary design course in industrial design and sustainability, also described herein, trains students to apply this approach …

The Effects Of Physical Activity On Greenhouse Gas Emissions For Common Transport Modes In European Countries, Aidan Duffy, Robert Crawford

Articles

This paper applies a life cycle methodology to estimate activity-related contributions of transport modes to GHG emissions. The methodology uses national input-output tables, environmental accounts, household budget data and nutritional data to derive food-sector GHG coefficients of consumption for ten European countries. The food energy requirements for each mode of transport are estimated taking account of the modal activity level and energy requirements. Walking, cycling, driving and bus travel are considered. Typical national food energy-related emissions for walking, cycling, and driving ranged from 25.6 - 77.3 gCO2-eq/pass.km, 10.4 - 31.4 gCO2-eq/pass.km and 1.7 - 5.2 gCO2-eq/pass.km; passenger transport was found …

Advances In The Synthesis Of Zno Nanomaterials For Varistor Devices, Suresh Pillai, John M. Kelly, Raghavendra Ramesh, Declan Mccormack

Articles

ZnO based varistors are widely used for overvoltage protection in many electrical and electronic circuits, at voltages ranging from a few to over a million volts. By careful control of the microstructure, through nanostructuring by chemical routes, it should be possible to produce varistors with high breakdown voltage (Vc), as this is proportional to the number of active grain boundaries in the sintered body. This property is particularly important for the production of the small-sized varistors needed for modern electronic instruments such as tablet computers and mobile phones. The current review will outline the recent advances in the chemical processing …

Anti-Bacterial Activity Of Indoor Light Activated Photocatalysts, Suresh Pillai, Michael Seery, Damian Synnott, Stephen Hinder, Georg Michlits

Articles

Nanocrystalline photocatalysts, prepared under ambient conditions using a microwave assisted syn-thesis, show indoor light photocatalytic activity for the degradation of Staphylococcus aureus and Escherichia coli. The zinc sulphide (ZnS) nanomaterials, prepared by a microwave assisted synthesis, are shown to be cubic blende structure with an average crystallite size of 4–6 nm. The anti-bacterial activ-ity of these nanomaterials is investigated under irradiation from a 60 W light bulb and photocatalytic activity is revealed to be due to the defects present in the crystal structure. The ZnS shows anti-bacterial action as both a bacteriostatic and bacteriocidal (88% reduction in the amount of …

Evaluation Of Time Series Techniques To Characterise Domestic Electricity Demand, Fintan Mcloughlin, Aidan Duffy, Michael Conlon

Articles

This paper discusses time series approaches, often used by Transmission System Operators (TSOs) to forecast system demand, and applies them at an individual dwelling level. In particular, two techniques, Fourier transforms and Gaussian processes were evaluated and used to characterise individual household electricity demand. The performance of the characterisation approaches were evaluated based on Pearson correlation coefficient, descriptive statistics and paired sample t-tests for electrical parameters: Total Electricity Consumption, Maximum Demand, Load Factor and Time of Use of maximum electricity demand. Finally, a number of time series tests were carried out to ensure certain properties remained between the original and …

State Of The Irish Housing Stock - Modelling The Heat Losses Of Ireland’S Existing Detached Rural Housing Stock & Estimating The Benefit Of Thermal Retrofit Measures On This Stock, Ciara Ahern, Philip Griffiths, Micheal O'Flaherty

Articles

Ireland’s housing stock has been identified as being amongst the least energy efficient in Northern Europe. Consequently, atmospheric emissions are greater than necessary. Government funded schemes have been introduced to incentivise the uptake of thermal retrofit measures in the domestic Irish market. A study of Ireland’s housing highlights the dominance of detached houses (43%), 72% of which are rurally located and are predominantly heated with fuel oil. This paper investigates the economic and carbon case for thermal retrofit measures to the existing detached, oil centrally heated, rural housing stock. The study found the case for energy efficiency measures to be …

Technology Adoption In Small And Medium-Sized Logistics Providers, Pietro Evangelista, Alan Mckinnon, Edward Sweeney

Articles

Purpose - The main aim of the research is to shed light on the role of information and communication technology (ICT) in the logistics innovation process of small and medium- sized third party logistics providers (3PLs).

Design/methodology/approach – A triangulated research strategy was designed using a combination of quantitative and qualitative methods. The former involved the use of a questionnaire survey of small and medium-sized Italian 3PLs with 153 usable responses received. The latter comprised a series of focus groups and the use of seven case studies.

Findings – There is a relatively low level of ICT expenditure with few …

Transient And Quasi-Steady Thermal Behaviour Of A Building Envelope Due To Retrofitted Cavity Wall And Ceiling Insulation, Aimee Byrne, Gerard Byrne, Anna Davies, Anthony Robinson

Articles

Accurate understanding of the thermal behaviour of building components is essential for predicting heat-ing or cooling needs and facilitates the implementation of more successful energy saving strategies and retrofits. This paper focuses on a specific measure commonly introduced through the residential energy efficiency retrofit programmes in Ireland–insulation. Traditionally, assessments of the performance of building envelopes have been based on assumed thermal resistances of the materials involved, labora-tory tests and computer modelling. The aim of the present work is to investigate the in situ thermal behaviour of a case study building and its components under transient and quasi-steady environmental conditions, comparing …

Using Model Building In Structural Engineering To Enhance Understanding Of Construction Principles And Methods, Niall Holmes, Henry Mullen

Articles

This paper presents a new model building exercise in a second year module in the Department of Civil & Structural Engineering in the Dublin Institute of Technology (DIT). The activity aimed to improve students’ understanding of structural engineering, construction principles and methods. It allowed students to practically apply lecture material and construct a scaled model giving them an opportunity to study and visualise a real structure and generate their own ideas on how it should be assembled within a constructivist active learning environment. As a result, lectures were found to be more interactive and students more engaged in the discussions …

Rf Breast Cancer Detection Employing A Non-Characterized Vivaldi Antenna And A Music-Inspired Algorithm, Giuseppe Ruvio, Raffaele Solimene, Antonietta D'Alterio, Max Ammann, Rocco Pierri

Articles

A novel microwave breast cancer detection system consisting of an Evolutionary Global Optimized Vivaldi antenna and an algorithm inspired by MUltiple SIgnal Classification (MUSIC) is presented. Its performance is assessed by using a simplified numerical breast phantom for a number of critical conditions including the presence of fibroglandular tissues.

High Sensitivity Fiber Refractometer Based On An Optical Microfiber Coupler, Lin Bo, Pengfei Wang, Yuliya Semenova, Gerald Farrell

Articles

An optical microfiber coupler-based refractive index sensor is proposed and experimentally demonstrated in this letter. A microfiber coupler with a minimum diameter of 2.5 µm and a uniform waist with a length of 2 mm is fabricated and used for sensing surrounding refractive index. Both theoretical and experimental results have shown that the spectral response of the proposed microfiber coupler is highly sensitive to the surrounding refractive index over the range from 1.3340 to 1.3800. An average sensitivity of 2723 nm/RIU over this entire refractive index range has been achieved experimentally. Furthermore, for the refractive index range from 1.3340 to …

Wave Function Solutions By Transformation From The Helmholtz To Laplacian Operator, Jonathan Blackledge, Bazar Babajanov

Articles

The Helmholtz, Schr¨odinger and Klein-Gordon equations all have a similar form (for constant wavelength) and have applications in optics, quantum mechanics and relativistic quantum mechanics, respectively. Central to these applications is the theory of barrier and potential scattering,which, through application of the Green’s function method yields transcendental equations for the scattered wave function thereby requiring approximation methods to be employed. This paper reports on a new approach to solving this problem which is based on transforming the Helmholtz operator to the Laplacian operator and applying a Green’s function solution to the Poisson equation. This approach yields an exact forward and …

Packaged Chalcogenide Microsphere Resonator With High Q-Factor, Pengfei Wang, Ming Ding, Timothy Lee, Ganapathy Senthil Murugan, Lin Bo, Yuliya Semenova, Qiang Wu, Dan Hewak, Gilberto Brambilla, Gerald Farrell

Articles

The fabrication and characterization of a packaged As2S3 microsphere resonator coupled to a tapered fiber using a low refractive index UV-curable polymer are reported. Embedding provides an efficient means to remove the highest order whispering gallery modes in the microsphere resonator, thus cleaning the resonator spectrum. The device photosensitivity, useful for tuning, is still present and useable after the packaging process

Reversible Photoluminescence Quenchin Of Cdse/Zns Quantum Dots Embedded In Porous Glass By Ammonia Vapor, A. O. Orlova, Yu A. Gromova, V. G. Maslov, O. V. Andreeva, A. V. Baranov, A. V. Federov, A. V. Prudnikau, M. V. Artemyev, Kevin Berwick

Articles

The photoluminescence response of semiconductor CdSe/ZnS quantum dots embedded in a borosilicate porous glass matrix to exposure to ammonia vapor is investigated. Formation of surface complexes on the quantum dots results in quenching of the photoluminescence and a shortening of the luminescence decay time. The process is reversible, desorption of ammonia molecules from the quantum dot surface causes the photoluminescence to recover. The sensitivity of the quantum dot luminescence intensity and decay time to the interaction time and the reversibility of the photoluminescence changes makes the CdSe/ZnS quantum dot in porous glass system a candidate for use as an optical …

The Influence Of Light Beam Convergence On The Stop-Bands Of A One-Dimensional Photonic Crystal, Vladimir A. Tolmachev, Kevin Berwick, Tatiana S. Perova

Articles

The influence of beam convergence on the photonic band-gaps, or stop-bands (SBs), of onedimensional photonic crystals (1D PCs) is investigated. The investigation is based on an analysis of the gap map obtained from reflection spectra, calculated by the transfer matrix method for various angles of light incidence, φ, The calculated data is compared with reflection spectra taken using Fourier Transform Infrared microspectroscopy. It was found that the introduction of the parameter, Δφ to account for the focused light beam, for angles up to 20°, has little effect on the first, or lowest SB and the SBs adjacent to it. However, …

Financial Forecasting Using The Kolmogorov-Feller Equation, Jonathan Blackledge, Marc Lamphiere, Kieran Murphy, Shaun Overton

Articles

An approach to analysing a financial time series using the Kolmogorov-Feller Equation is considered, in particular, the Generalised Kolmogorov-Feller Equation (GKFE) subject to variations in the Stochastic Volatility. Using the Mittag-Leffler memory function, we derive an expression for the Impulse Response Function associated with a short time window of data which is then used to derive an algorithm for computing a new index using a standard moving window process. It is shown that application of this index to financial time series, subject to a low volatility condition, correlates with the start, direction and end of a trend depending on the …

Estimation Of Wave Energy From Wind Velocity, Jonathan Blackledge, Eugene Coyle, Derek Kearney, Ronan Mcguirk, Brian Norton

Articles

The aim of this paper is to report on a possible correlation between the Levy index for wind velocity and the mean Energy Density of sea surface waves in the same location. The result is based on data obtained from 6 buoys located around the coast of Ireland and maintained by the Marine Institute of Ireland and a further 144 buoys located at various locations off the coast of the United States of America and maintained by the National Data Buoy Centre. These buoys provide historical data on the wind velocity, wave height and wave period as well as other …

Regional Integration Of Renewable Energy Systems In Ireland: The Role Of Hybrid Energy Systems For Small Communities, Craig Goodbody, Eileen Walsh, Kevin Mcdonnell, Philip Owende

Articles

Due to a lack of indigenous fossil energy resources, Ireland’s energy supply constantly teeters on the brink of political, geopolitical, and geographical unease. The potential risk to the security of the energy supply combined with the contribution of anthropogenic greenhouse gas emissions to climate change gives a clear indication of Ireland's need to reduce dependency on imported fossil fuels as primary energy source. A feasibility analysis to investigate the available renewable energy options was conducted using HOMER software. The Net Present Cost, the Cost of Energy, and the CO2 emissions of each potential energy combination were considered in determining the …

Improving Tribological Properties Of Cast Al-Si Alloys Through Application Of Wear-Resistant Thermal Spray Coatings, David Culliton, Tony Betts, Sandra Carvalho, David Kennedy

Articles

Flame Spray Thermal Spray coatings are low-cost, high-wear surface-treatment technologies. However, little has been reported on their potential effects on cast automotive aluminum alloys. The aim of this research was to investigate the tribological properties of as-sprayed NiCrBSi and WC/12Co Flame Spray coatings applied to two cast aluminum alloys: high-copper LM24 (AlSi8Cu3Fe), and low-copper LM25 (AlSi7Mg). Potential interactions between the mechanical properties of the substrate and the deposited coatings were deemed to be significant. Microstructural, microhardness, friction, and wear (pin-on-disk, microabrasion, Taber abrasion, etc.) results are reported, and the performance differences between coatings on the different substrates were noted. The …

Using Weigh-In-Motion Data To Determine Aggressiveness Of Traffic For Bridge Loading, Eugene J. Obrien, Bernard Enright

Articles

This paper presents results based on the analysis of an extensive database of weigh-in-motion (WIM) data collected at five European highway sites in recent years. The data are used as the basis for a Monte Carlo simulation of bridge loading by two lane traffic, both bidirectional and same-direction. Long runs of the simulation model are used to calculate characteristic bridge load effects (bending moments and shear forces), and these characteristic values are compared with design values for bridges of different length as specified by the Eurocode for bridge traffic loading. Various indicators are tested as possible bases for a “Bridge …

Microsimulation Evaluation Of Eurocode Load Model For American Long-Span Bridges, Bernard Enright, Colm Carey, Colin Caprani

Articles

The ability to accurately predict traffic loading is essential for cost-effective bridge maintenance and repair programs. The traffic load model currently used in the United States for the design of long-span bridges was developed over three decades ago. In the meantime vehicle characteristics and traffic patterns have changed. The Eurocode for traffic loading is more recent, but was calibrated only for bridges up to 200 m long. In this work, Weigh-In-Motion traffic records from 11 different sites across Alabama are used to establish congested traffic loading. Traffic microsimulation is used to generate the congestion, based on the real traffic data. …

An Investigation Of The Biochemical Properties Of Tetrazines As Potential Coating Additives, Swarna Jaiswal, Brendan Duffy, Luke O'Neill, Patrick Mchale

Articles

1,2,4,5-Tetrazine and its 3,6-disubstituted derivatives are currently used for a range of industrial and medical applications as they exhibit particular coordination chemistries, characterized by electron and charge transfer phenomena. The aim of the present work is to describe the synthesis of two tetrazine derivatives, namely 3,6-dihydrazino-1,2,4,5-tetrazine (DHDTZ) and 1,2,4,5-tetrazine dicarboxylic acid (DCTZ), and determine their antibacterial, antioxidant and anticorrosion characteristics as additives in a sol-gel coating on SS316L steel. The structure of the tetrazines was confirmed by NMR and FTIR while the surface morphology of bacterial cells in their presence was observed by AFM. Their ability to inhibit corrosion on …

Mid-Infrared Raman Sources Using Spontaneous Raman Scattering In Germanium Core Optical Fibers, Pengfei Wang, Christy Charlton O'Mahony, Timothy Lee, Rand Ismaeel, Thomas Hawkins, Yuliya Semenova, Lin Bo, Qiang Wu, Colette Mcdonagh, Gerald Farrell, John Ballato, Gilberto Brambilla

Articles

Mid-infrared Raman sources based on spontaneous Raman scattering have been demonstrated in a 15-lm diameter glass-clad crystalline germanium optical fiber and in a germanium-wire. A quantum cascade laser was used as pump at a wavelength of 5.62 lm. Because of their ultra-high optical nonlinearities and extremely broad transparency window, germanium core fibers offer the possibility of fabricating compact and efficient mid-infrared sources.

Learning From Learning Groups, Mike Murphy, S. M. Chance, Gavin Duffy, Brian Bowe

Articles

Collaborative learning is a key, and complementary, component of student-centred enquiry-based pedagogy. Today, many educators understand that students learn effectively when working together with their peers to construct new knowledge. Many teachers are working to help their students develop such ability. Teachers do this to help students better understand the relevance of new content, connect new ideas into existing frameworks of understanding, and construct new neurological pathways and connect synapses in their brains. In addition, group learning has been shown to increase students’ critical thinking skills, creativity, collaborative behaviours, understanding of ethics, and the like. In the literature, attention has …

A Highly Efficient Tio2-Xcx Nano-Heterojunction Photocatalyst For Visible-Light Induced Antibacterial Applications, Vinodkumar Etacheri, Michael Seery, Stephen Hinder, Georg Michlits, Suresh Pillai

Articles

Visible-light-induced antibacterial activity of carbon-doped anatase-brookite titania nano-heterojunction photocatalysts are reported for the first time. These heterostructures were prepared using a novel low temperature (100 °C) non-hydrothermal low power microwave (300 W) assisted method. Formation of interband C 2p states was found to be responsible for the band gap narrowing of the carbon doped heterojunctions. The most active photocatalyst obtained after 60 minutes of microwave irradiation exhibits a 2-fold higher visible-light induced photocatalytic activity in contrast to the standard commercial photocatalyst Evonik-Degussa P-25. Staphylococcus aureus inactivation rate constant for carbon-doped nano-heterojunctions and the standard photocatalyst was 0.0023 and -0.0081 min …

Finite Element Analysis Of Balloon-Expandable Coronary Stent Deployment: Influence Of Angioplasty Balloon Configuration, David Martin, Fergal Boyle

Articles

Today, the majority of coronary stents are balloon-expandable and are deployed using a balloon-tipped catheter. To improve deliverability, the membrane of the angioplasty balloon is typically folded about the catheter in a pleated configuration. As such, the deployment of the angioplasty balloon is governed by the material properties of the balloon membrane, its folded configuration and its attachment to the catheter. Despite this observation, however, an optimum strategy for modelling the configuration of the angioplasty balloon in finite element studies of coronary stent deployment has not been identified, and idealised models of the angioplasty balloon are commonly employed in the …