Engineering Commons^™

Flexural Bond Strength Of Masonry Assemblies With Lightweight Grout, Benjamin L. Hiner

All Theses

Lightweight grout has many potential benefits in masonry construction, including minimizing mass, improving thermal performance, and potentially reducing shrinkage cracking via internal curing. However, insufficient testing of masonry assemblies with lightweight grout has been conducted to suggest appropriate design modification factors akin to the lambda factor in ACI 318-19. The objective of this paper is to study the tensile bond behavior of masonry assemblies grouted with lightweight grout and to suggest appropriate equations for predicting design capacity. A moment couple test is designed specifically for grouted masonry assemblies and has additional capacity compared to the traditional ASTM 1072 bond wrench …

Transforming Character Faces Based On Perceived Personality Traits, Kara Porter

All Theses

The ability to read other human's faces is a crucial part of everyday life. Subconsciously, the human brain analyzes someone's face within the first few seconds of seeing it, making a variety of conclusions ~\cite{FacePerp} such as gathering information about emotional state and assuming character traits this person might possess. The purpose of this thesis is to create a tool that allows a user to alter features of a character's three dimensional (3D) face mesh to look increasingly or decreasingly like the character possesses certain personality traits. Using a sample set of randomly generated faces, a survey is conducted to …

Oam-Based Wavelets In A High Speed Optical Probing System For Measuring The Angular Decomposition Of The Environment, Justin Free

All Theses

This thesis presents the theoretical development of orbital angular momentum (OAM) based wavelets for the analysis of localized OAM information in space. An optical probing system for generating and detecting these wavelets is demonstrated; individual wavelets can scan the environment in 10µs or less. The probing system was applied to a three-dimensional atmospheric turbulence distribution to obtain a continuous wavelet transform of the angular information of the turbulent propagation path about a fixed radius. An entire continuous wavelet transform was measured in 3.8ms; the measurements are much faster than the turbulence and give insight into the short time scale of …

An Application Of Optimized Bistable Laminates As A Low Velocity, Low Impact Mechanical Deterrent, Graham Lancaster

All Theses

This research considers the problem of using bistable laminates as a mechanical deterrent to the impending impact of a particle. The structure will be controlled through an algorithm that will utilize piezoelectric devices to activate them in unison with the bistable laminate to successfully deter. A novel experimental setup will be constructed to ensure that the bistable laminate stays fixed when acting as a mechanical deterrent. Piezoelectricity is the main driving force of the bistable laminate to morph and this study will use a Macro Fiber Composite (MFC) actuator that contains piezoelectric ceramic rods in a patch to transfer electrical …

A Benchtop Robotic Automation Approach For Manufacturing Prefilled Syringes, Yehua Zhong

All Theses

Automation and robotics have become a staple in the biological manufacturing sector due to their ability to efficiently work without operator inputs, with a high degree of accuracy and repeatability. Industrial robotic arms, in particular, present themselves as valuable tools for biological manufacturing scenarios that require customized solutions due to their ease of programming and flexibility. The traditional hospital-focused healthcare system was organically developed to address acute conditions, however, in recent years, due to the unprecedented occurrence of emergencies happening more frequently, fast and efficient drug production becomes important [17]. This thesis represents the use of a benchtop robot and …

Design Of Arbitrary Planar Optical Devices With Full Phase Control Using Nanoimprinting Of Refractive Index, Matthew Panipinto

All Theses

Planar optical devices offer a lightweight solution to the constraints found in traditional optical devices. While subwavelength patterning of optics offers attractive performance and size, traditional fabrication methods demand a trade-off between resolution and throughput that presents a significant hurdle for the widespread use of subwavelength devices. Nanoimprinting of refractive index (NIRI) is a novel fabrication method pioneered in previous work that offers promise in mitigating the throughput issues that hamstring traditional fabrication methods. However, NIRI has not been shown to impart full $2\pi$ phase control in planar optical devices, nor has a method for fabricating arbitrary designs using the …

Tunable Filtration Of Particles During Dip-Coating, Connor Copeland

All Theses

When a solid substrate is withdrawn from a liquid bath a thin coating is deposited whose thickness is given by the Landau-Levich-Derjaguin (LLD) law. We perform an experimental study of dip coating of particle suspensions showing that particles of a given size can become entrained in the meniscus by the competition between viscous and surface tension forces. This is called capillary filtration and can be used as a tunable dynamic filter. For single particle suspensions, filtration can be in terms of either clumps or single particles, with the relevant entrainment points depending upon the rheology of the working fluid, either …

An Evaluation Of Energy Consumption Comparing Conventional Water Treatment Plants To Microfiltration And Ultrafiltration Water Treatment Plants, Danielle Larsen

All Theses

The use of low-pressure, hollow fiber microfiltration (MF) and ultrafiltration (UF) membranes has become increasingly prominent in drinking water treatment plant configurations over the past 30 years. At the same time, the topics of energy efficiency and sustainability in industry are becoming progressively more important. Although MF and UF are highly successful in filtration, they are generally thought of as significant energy consumers; however, the data have not yet been available to compare multiple plants in various contexts to determine the factors that most affect energy use. This research compares the energy use of MF and UF treatment plants to …

Optimizing Crispr/Cas9-Mediated Knockdown Of Angptl3 In Liver Cell Lines And Mouse Hepatocytes, Meredith Reeves

All Theses

Familial hypercholesterolemia (FH) is a genetic condition characterized by elevated levels of low-density lipoprotein cholesterol (LDL-C) that leads to an increased risk of developing cardiac disease early in life (Shah et al., 2020). Current treatments such as statins and PCSK9 inhibitors have helped lower LDL-C levels, however they require repeated administration every 4-6 weeks to remain effective (Raal et al., 2018). Angiopoietin-like 3 (ANGPTL3) is an inhibitor of plasma lipid metabolism that has become a promising molecular target for the treatment of FH. Individuals with non-functional copies of ANGPTL3 demonstrate low levels of plasma LDL-C and triglycerides, indicating a protective …

The Evacuation Simulation Of Wheelchair Users In A Building Fire: An Initial Dynamic Characterization Of Structural Egress Components, Haley Hostetter

All Theses

People with disabilities are one of the most vulnerable groups involved in building fires. According to the U.S. Fire Administration, in the United States alone, an estimated 700 home fires involve people with physical disabilities each year while over 1700 involve those with mental health disorders. Despite this, the current body of literature shows few studies focused on the evacuation of disabled people. This is a direct result of past and present social injustice on people with disabilities and has resulted in high injury and death rates during fires. To combat this, enrich the literature, and improve their experiences in …

Modeling Hierarchical Porous Electrodes With Tailored Anisotropic Structure, Debanjan Sarker

All Theses

Modern electric vehicles and consumer electronics applications demand high specific energy from Li-ion batteries, which can be charged and discharged faster. In the search for high specific energy, researchers have tried to make thicker battery electrodes which contain a greater proportion of active material. While chemical and structural modification of electrodes can help to increase the electronic conductivity of active material, the microstructure of porous electrodes can be engineered to enhance ion transport for fast charge and discharge. Previous research has shown that macropores introduced by directional freeze tape casting can enhance the performance of thick porous electrodes. For instance, …

Application Of A 14c-Assay To Assess Methanotrophic Biodegradation Of Tce In Low Ph Groundwater, Evan Groome

All Theses

Current biological strategies for remediating trichloroethylene (TCE) in low pH aquifers (i.e., pH14C-TCE assay was developed to determine pseudo first-order rate constants for the degradation of TCE in microcosms containing soil and groundwater from the Boeing Michigan Aeronautical Research Center (BOMARC) superfund site, where the pH ranges from 4.1 to 4.9. The ¹⁴C-TCE assay was also adapted to calculate soil-normalized rate constants for data from this site, as well as data that Szwast²¹ collected from the Beltsville Agricultural Research Center (BARC). In addition to natural attenuation, biostimulation through amendments of methane and nutrients were also assessed. This treatment …

Rapidly Deployable Structures For Disaster Relief And Military Use, Jayson Leonard

All Theses

Rapidly deployable structures currently play a vital role in the recovery aspect of disaster-stricken areas and the safety of military personnel in hostile zones. More recently there has also been a need for the structures to deal with unforeseen disruptions caused by the COVID pandemic, such as COVID testing centers or backyard pop-up offices. These structures could be used in different environments and serve many other purposes. Along with the structural performance of these shelters, they need to integrate into systems set in place effortlessly. For that reason, four key factors were taken into consideration, namely (1) deployability (how difficult …

Mechanizing The Removal Of Soil Between Peach Trees Planted On Berms, Coleman Scroggs

All Theses

Armillaria root rot (ARR), primarily caused by the soilborne fungus Desarmillaria tabescens, has become the number one cause for peach tree decline in the Southeastern United States. Research has shown that planting peach trees on shallow berms and excavating the soil around the root collar two years after planting lessens the effects of ARR. However, berms make orchard operations such as pruning, thinning, and harvesting more cumbersome and cause cultural concerns as channels of water at their base can lead to erosion and the slope of the berms leads to herbicide and fertilizer runoff. The objective of this research was …

Sub-Bandgap Photon-Assisted Electron Trapping And Detrapping In Algan/Gan Heterostructure Field-Effect Transistors, Andrew Gunn

All Theses

We have investigated photon-assisted trapping and detrapping of electrons injected from the gate under negative bias in a heterostructure field-effect transistor (HFET). The electron injection rate from the gate was found to be dramatically affected by sub-bandgap laser illumination. The trapped electrons reduced the two-dimensional electron gas (2DEG) density at the AlGaN/GaN heterointerface but could also be emitted from their trap states by sub-bandgap photons, leading to a recovery of 2DEG density. The trapping and detrapping dynamics were found to be strongly dependent on the wavelength and focal position of the laser, as well as the gate bias stress time …

Park Equity Modeling: A Case Study Of Asheville, North Carolina, Anisa Young

All Theses

Parks and greenspaces are publicly available entities that serve the vital purpose of promoting multiple aspects of human welfare. Unfortunately, the existence of park disparities is commonplace within the park setting. Specifically, marginalized individuals encounter limited park access, insufficient amenity provision, and poor maintenance. To remedy these disparities, we propose a process in which we select candidate park facilities and utilize facility location models to determine the optimal primary parks from both existing and candidate sites.

We note that platforms currently exist to identify the geographical areas where residents lack sufficient access to parks. However, these platforms do not yet …

Characterization Of Thermal Gelation Properties In Bioresorbable Thermally Activated Hydrogel Polymers For Hernia Surgery Applications, Alexander Mayfield

All Theses

Hydrogel adhesives are a new class of materials with excellent biocompatibility, which makes them very attractive for biomaterial applications. It has been previously shown that Tetronic T1107, a four-arm poly (propylene oxide)-poly (ethylene oxide) (PPO-PEO) block copolymer, is useful as a chemical crosslinking thermo-responsive hydrogel for bioadhesive applications. The end groups of this polymer are modified with acrylate and N-hydroxysuccinimide (NHS) functional groups. The acrylate end group gives the polymer cohesive properties with long-range chemical crosslinking using dithiothreitol (DTT), while the NHS end group gives the polymer adhesive properties through bonding with amines found in organic tissue. It was found …

Distributed Learning With Automated Stepsizes, Benjamin Liggett

All Theses

Stepsizes for optimization problems play a crucial role in algorithm convergence, where the stepsize must undergo tedious manual tuning to obtain near-optimal convergence. Recently, an adaptive method for automating stepsizes was proposed for centralized optimization. However, this method is not directly applicable to decentralized optimization because it allows for heterogeneous agent stepsizes. Furthermore, directly using consensus between agent stepsizes to mitigate stepsize heterogeneity can decrease performance and even lead to divergence.

This thesis proposes an algorithm to remedy the tedious manual tuning of stepsizes in decentralized optimization. Our proposed algorithm automates the stepsize and uses dynamic consensus between agents’ stepsizes …

The Physical Properties And Handling Characteristics Of Pelletized Biomass Materials, Ryan Dean

All Theses

Biomass and feed pellets can be handled and stored using similar equipment used for other bulk materials; however, their unique physical characteristics can lead to handling challenges. Understanding the flow characteristics of these materials is essential for handling and storage system design, but these characteristics are not well defined in less-than-ideal conditions. The overall objective of this study was to evaluate how moisture content and level of fines influence the angle of repose (AoR) of hardwood, pine bedding, and feed pellets along with determining the impacts of displacement on the shear stress of fuel pellets utilizing a modified linear wall …

Tissue-Engineered Living Pulmonary Valve For Young Adult Patients, Erica Hoskins

All Theses

Cardiovascular disease (CVD) is a non-communicable disease responsible for 659,000 deaths annually in the United States. While CVD can affect all components of the cardiovascular system, heart valve disease is responsible for 25,000 deaths yearly. Of specific interest is the pulmonary valve since there is limited research on resolving pathologies that affect it. Like the aortic and mitral valves, common pathologies include stenosis, regurgitation, and atresia. Notably, the pulmonary valve requires repair and replacement in pediatric patients and young adults due to congenital disabilities. Even with technological advances in valve replacements, limitations still present themselves for use with younger patients …

Bioleaching Of Arsenic From Agricultural Soils, Zachary Gilstrap

All Theses

Arsenic is a ubiquitous trace metalloid. However, increasing concentrations of arsenic in soil and water is a problem the world faces due to inputs from anthropogenic sources such as mining, milling, agriculture, and coal ash. One method of remediation for these arsenic-contaminated sites is bioleaching. While it is most often used to extract metals from raw ore, it is a viable and environmentally friendly method to remove the same metals from soil. Bioleaching removes metals by cultivating living organisms such as the fungi Aspergillus niger (A.niger) or the bacterium Thiobacillus ferrooxidans (T.ferrooxidans). This research aimed to investigate A. …

Computational Tradespace Exploration, Analysis, And Decision-Making: A Proposed Framework For Organizational Self-Assessment, Julia Daniels

All Theses

The ability to assess technical feasibility, project risk, technical readiness, and realistic performance expectations in early-phase conceptual design is a challenging mission-critical task for large procurement projects. At present, there is not a well-defined framework for evaluating current practices of organizations performing computational trade studies. One such organization is the US Army Ground Vehicle Systems Center (GVSC). When defining requirements and priorities for the next-generation autonomy-enabled ground vehicle system, GVSC is faced with the challenge of an increasingly complex programmatic tradespace due to emerging complexities of ground vehicle systems. This thesis aims to document and evaluate tradespace processes, methods, and …

A 3d Tissue Engineering Model To Study Mitral Valve Annulus Calcification Under Diabetic Conditions, Erin James

All Theses

The most complex heart valve is the mitral valve (MV). Many pathologies can affect the MV, including stenosis, regurgitation, prolapse, and mitral annulus calcification (MAC). MAC is chronic degeneration of the annulus, which is the fibrous, saddle-shaped “ring” that can contract and relax with the myocardium. The prevalence of MAC is around 15% but increases in patients with other cardiovascular diseases and risk factors. It is also thought to increase in patients with type 2 diabetes, but MAC has not been properly characterized within this population because of confounding factors such as cardiac disease and kidney disease. The goal of …

Soft Robotic Arms For Fall Mitigation: Design, Control And Evaluation, Param Malhotra

All Theses

Most fall mitigation devices present a heavy system that avoid injuries to the user by preventing the impact of a fall. They are dependent on the user capability or on the probability that the user falls in the assumed manner the system was designed for. Often that is not the case, hence this project initiates a novel concept of using soft robotic arms to prevent falls from happening in the first place itself and save the user from any injuries. This thesis describes the prototype and development of a soft continuum robotic backpack system. The system can validate its use …

Development Of A New Affinity Membrane For Rapidly Purifying Non-Antibody Proteins, Friendship Edioma

All Theses

This thesis project describes the modification and evaluation of a new affinity membrane for rapid chromatographic purification of non-antibody proteins. The affinity membrane utilizes Im7/CL7 coupling technology developed by Dr. Vassylyev's lab at the University of Alabama Birmingham (UAB), licensed by TriAltus Bioscience. The behavior of the membrane was evaluated using purified CL7-tagged Cas9 as my model protein for static and dynamic binding capacity analysis.

Chapter one provides an overview on biopharmaceutical drug production process development. I discuss how protein drugs are produced, isolated, and purified from the cell supernatant after upstream phases are completed. Despite increasing demands for biologics, …

Digital And Gradient Refractive Index Planar Optics By Nanoimprinting Porous Silicon, Anna Hardison

All Theses

Due to the drawbacks of traditional refractive optics, the implementation of planar or nearly planar optical devices has been of research interest for over a century. Subwavelength gratings are a particularly promising option for creating flat optical devices; however, the implementation of subwavelength grating-based optics is limited by fabrication constraints. Recently, we implemented flat optical devices using the nanoimprinting of refractive index (NIRI) process, a process which was pioneered in a previous study but remained largely unproven in terms of device fabrication. The planar, gradient index microlenses we fabricated were found to possess an effective medium similar to a subwavelength …

Deep Learning Based Localization Of Zigbee Interference Sources Using Channel State Information, Dylan Kensler

All Theses

As the field of Internet of Things (IoT) continues to grow, a variety of wireless signals fill the ambient wireless environment. These signals are used for communication, however, recently wireless sensing has been studied, in which these signals can be used to gather information about the surrounding space. With the development of 802.11n, a newer standard of WiFi, more complex information is available about the environment a signal propagates through. This information called Channel State Information (CSI) can be used in wireless sensing. With the help of Deep Learning, this work attempts to generate a fingerprinting technique for localizing a …

A Digital Healthcare Application For Patient Monitoring And Assessment, Brandon Shumin

All Theses

The COVID-19 pandemic strained our healthcare resources and exacerbated the existing issues of primary care shortages and burnout rates for healthcare professionals. Due in part to these factors, telehealth has seen more wide-spread use during this time. However, current asynchronous telehealth applications require stable Internet to function fully. Since many medically underserved populations in the United States lack Internet access in their homes, an application that offers patient monitoring and assessment could extend their access to medical resources. This work proposes such a digital healthcare application for iOS devices and evaluates it based on the system requirements of availability, data …

Creep Behavior Of A Ti-Based Multi-Principal Element Alloy, Benjamin Elbrecht

All Theses

Abstract

The understanding of microstructural damage mechanisms is the foundation of better understanding existing materials and future material development. There are significant challenges to measuring these damage mechanisms in-situ as continuous observation of the state of the microstructure is difficult or impossible for many experimental setups. This thesis presents a method for measuring grain boundary sliding (GBS) and local strain concentrations in-situ via a Heaviside function based algorithm. GBS is the shearing of two grains along their shared grain boundary and is a common damage mechanism in creep which presents as a discontinuity that can be measured with a Heaviside …

An Evaluation Of Wi-Fi 802.11b Backscatter, Anthony Chen

All Theses

Internet of Things (IoT) devices are in need of low-power communications systems with longevity and reliability. With the use of backscatter technology, IoT devices can communicate at the cost of almost no power and can last for up to a decade. Furthermore, backscatter technology is compatible with everyday wireless signals such as Wi-Fi and Bluetooth, allowing for easy communication without specific hardware constraints. This thesis aims to evaluate a Wi-Fi backscatter system and analyze its ease in triggering off of such ambient signals and sources. The system will utilize Wi-Fi 802.11b as a backscatter source to trigger the backscatter system …