Engineering Commons^™

An Experimental Investigation On Liquid Methane Convection And Boiling In Rocket Engine Cooling Channels, Abraham Trujillo

Open Access Theses & Dissertations

In the past decades, interest in developing hydrocarbon-fueled rocket engines for deep spaceflight missions has continued to grow. In particular, liquid methane (LCH4) has been of interest due to the weight efficiency, storage, and handling advantages it offers over several currently used propellants. Deep space exploration requires reusable, long life rocket engines. Due to the high temperatures reached during combustion, the life of an engine is significantly impacted by the cooling system's efficiency. Regenerative (regen) cooling is presented as a viable alternative to common cooling methods such as film and dump cooling since it provides improved engine efficiency. Due to …

Predicting Propylene Loss With Inferential Model Development Using Design Of Experiments (Doe) And Historical Data, Jeffrey Allen Wheeler

Open Access Theses & Dissertations

Inferential models are a highly researched topic as the science of digital automation becomes more prevalent as information is in abundance. Welldeveloped inferred models can augment the use of analyzers in steady state processing and highly correlated ones can even replace online analytics. The use of design of experiments (DOE) inferred models with historical process data and a rigorous plant simulator can reduce the case study duration while achieving a high degree of accuracy. This paper uses surface response and full factorial models as the first step in model development, and then uses actual historical plant data to create a …

The Interfacial Fracture Of Bonded Materials And Composites, Kai Zhao

Open Access Theses & Dissertations

Adhesive bonding and composite materials have been widely used in manufacturing industry. Failure results from the weakest link in a structure and this is often the interface between two materials. In case of composites, it becomes the fiber and matrix interface. In case of bonded polymers, the bonding line is the interface. This Dissertation is focused on the interfacial fracture of bonded materials and composites. First, a systematic experimental investigation on adhesive bonding strengths of polymer/polymer and polymer/metal joints was conducted and the experimental results were compared with other researchers' work. Then, a modified short-beam shear approach is developed to …

Enhanced Finite Element Modeling Of The Thermo-Mechanical Responses Of Jointed Pcc Pavements Under Environmental And Traffic Loads, Mohammad Ali Zokaei Ashtiani

Open Access Theses & Dissertations

Jointed plain concrete pavements (JPCP) are the most commonly used type of rigid pavement systems and the accurate modeling of their thermo-mechanical responses is of primary importance in a mechanistic-empirical pavement design procedure. In JPCP, the temperature gradient and resulting slab shape play a crucial role in the magnitude of stresses and deflections caused by the superimposed traffic loads. Temperature gradients through the slab depth can produce thermal curling in slabs and can also produce slab expansion and contraction, which leads to the generation of frictional tractions between slabs and foundation. The prediction of these frictional tractions is complicated by …

Frequency Selective Surfaces For Extreme Applications, Jay Houston Barton

Open Access Theses & Dissertations

It is known that for high-power microwaves and other extreme environments, the use of resonant metallic elements in frequency selective surfaces can be problematic. The solution developed within this Dissertation to solve these problems was to use guided-mode resonance phenomenon to create all-dielectric frequency selective surfaces that could survive these extreme environments.

To fully understand how these devices work, three different computational electromagnetic methods are formulated and implemented. The formulation of these methods start with the differential form of Maxwellâ??s equation and are derived all the way down to the final simulation state. This is done sequentially and all the …

Development Of A Variable Stiffness Locally Adjustable And Repairable Low-Cost Energy Storage And Return Carbon Fiber Prosthetic Foot: A Feasibility Study, Joshua Scott Bowen

Open Access Theses & Dissertations

Background: Energy storage and return (ESAR) prosthetic feet were developed to improve the mobility and function of lower-limb amputees. Amputees in the Developing World amputees lack this technology. Most current Developing World prosthetic solutions do not adequately address the needs of active amputees and were not designed to pass international standard tests. Developing a low-cost, repairable, adjustable, energy storage and return prosthetic foot would close this technological gap and improve the mobility and function of active amputees. The goal of this research is to determine the feasibility of fabricating a low-cost, adjustable, ESAR, repairable prosthetic foot manufactured from carbon fiber …

3d Printed Spatially Variant Anisotropic Metamaterials, Cesar Roman Garcia

Open Access Theses & Dissertations

The recent advancement in 3D printing has created a new way to design electronics and electromagnetic devices. This allows for a new breed of non-planar designs to be used, fully exploiting all three dimensions like never before. More functions can be fit into the same amount of space, products with novel form factors can be more easily manufactured, interconnects can be routed more smoothly, interfaces can be better implemented, electrical and mechanical functions can be comingled, and entirely new device paradigms will be invented. When departing from traditional planar topologies many new problems arise like signal integrity, crosstalk, noise, and …

A Study Of Ti-Doped Wo3 Thin Films Using Comparative Theoretical And Experimental Approach, Aurelio Paez

Open Access Theses & Dissertations

Metal oxides like Tungsten Oxide (WO3) are well documented and characterized in the literature, with uses in darkening windows and mirrors, flat computer displays, solar panel cooling, and sensors (of interest in this study). Ti doping of WO3 is less documented and the focus of this study. Sample thin films of pure WO3 and varyingly Ti doped WO3 were prepared using Radio Frequency magnetron sputtering (RF) (13.56 MHz) to grow thin films on a silicon substrate. This study aims to compare multiple Ti doping percentages in WO3 theoretically and then compare with experimental data taken from thin films of various …

Use Of Cosine Modulated Filter Bank To Quantify Human Muscle Fatigue Using Electromyography Signals Obtained During Isometric Voluntary Contractions, Liza Stephanie Rodriguez

Open Access Theses & Dissertations

As technology continues to advance, there continues to be an interest in applying engineering theories to solve medical problems. Technology has allowed researchers to investigate the properties and characteristics of the human body in hopes of emulating their complexities. The rising interest in the study of biopotentials for use in prosthetic limbs, exoskeletons and machine interfacing has led to a necessity to validate that the understanding of these signals is accurate. The study of biopotentials generated by muscles via a method known as electromyography (EMG) has improved the understanding of effects of rehabilitative treatments, assisted in diagnosing diseases, control of …

Effect Of Multi-Tube Injector Geometry On Flame Stability And Nox Emission In A High Pressure Gas Turbine Combustor, Sudipa Sarker

Open Access Theses & Dissertations

Future generation gas turbine combustors for power production are expected to have the capability of operating on high hydrogen content fuels. To ensure the implementation of high hydrogen content (HHC) fuel in a power generation unit without negotiating with operational or emission advantages, the study of the flame stability regime and behavior of (HHC) fuel under gas turbine condition leads to the necessity of the development of an optically accessible high-pressure combustor. This Dissertation first presents the design of an optically high-pressure combustor facility based on 500 kW power and 1.5 MPa pressure which is the representative pressure of a …

Evaluation Of Ozone Trends In Southern Doña Ana County, New Mexico Thru Wind Rose Analysis And Use Of Noaa Hysplit Model, Maria Aurelia Sisneros

Open Access Theses & Dissertations

The objective of this study was to determine whether increasing ozone concentrations in 2012 and 2013 at the Santa Teresa air quality monitor in Doña Ana County, New Mexico were due to a local point source impacting this monitor only or part of a regional phenomenon that affects all the monitors within the Paso del Norte Region. In addition, the study focused on identifying local and regional/long-range source areas contributing transport ozone to the study area (southern Doña Ana County).

The study showed that increasing ozone levels were not unique to the Santa Teresa monitor due to the fact that …

Transatlantic Maritime Transportation Between The Czech Republic And The United States, Petr Toman

Open Access Theses & Dissertations

Maritime transportation is the backbone of today´s world trade and therefore there special attention should be paid to all subjects concerning this mode of transportation. It is also necessary to complement maritime transportation by other modes, such as rail and/or truck (road). This thesis deals with the problems of maritime transportation and provides the summary of recent developments, trends and statistics mainly on Transatlantic maritime routes (Europe to U.S.). Besides maritime transportation, this thesis also reviews the trends and statistics of rail and truck (road) transportation in U.S. and Europe.

The second part of thesis seeks to create a mathematical …

An Experimental Investigation Of The Cooling Channel Geometry Effects On The Internal Forced Convection Of Liquid Methane, Adrian Trejo

Open Access Theses & Dissertations

Rocket engine fuel alternatives have been an area of discussion for use in high performance engines and deep spaceflight missions. In particular, LCH4 has showed promise as an alternative option in regeneratively cooled rocket engines due to its non-toxic nature, similar storage temperatures to liquid oxygen, and its potential as an in situ resource. However, data pertaining to the heat transfer characteristics of LCH4 is limited. For this reason, a High Heat Transfer Test Facility (HHTTF) at the University of Texas at El Paso's (UTEP) Center for Space Exploration Technology and Research has been developed for the purpose of flowing …

Sustainable Public Transportation In Large Cities: Demand Estimation, Tadeas Umlauf

Open Access Theses & Dissertations

Public transportation helps to decrease the negative externalities caused by people's mobility. In many countries, the total number of vehicles and traffic has risen many times in the last decades but there is limited space to improve infrastructure in the cities. Large cities all over the world have a lot of issues with congestion, traffic noise, emission of greenhouse gases, and accidents. According to many international examples, sustainable public transportation in combination with synergistic projects (park & ride, kiss & ride, bike & ride) can help to overcome these issues. Therefore new transit modes and routes have been implemented in …

A Robust Algorithm For Estimating The Balance Of Autonomic Nervous System With Application To Mental Fatigue Detection Using Photoplethysmographic (Ppg) Signals, Ajay Kumar Verma

Open Access Theses & Dissertations

Spectral- and time-domain analysis of Heart Rate Variability (HRV) signal is widely used as a quantitative marker of the Autonomic Nervous System (ANS) activity. A robust algorithm was developed to derive HRV from photoplethysmographic (PPG) signals, to compute FFT- and AR-based spectra of these HRV signals, and to determine time- and frequency-domain features. This algorithm has detrending, sample-rate reductions, false-peak removal, automatic peak detection, peak-to-peak (P-P) interval detection and correction, time-domain feature extraction, HRV signal generation, and spectral-domain feature extraction from the HRV signal. Adapting to the very low spectral contents of the input PPG signal is very helpful in …

Imprecise Probabilities In Engineering Analyses, Michael Beer, Scott Ferson, Vladik Kreinovich

Departmental Technical Reports (CS)

Probabilistic uncertainty and imprecision in structural parameters and in environmental conditions and loads are challenging phenomena in engineering analyses. They require appropriate mathematical modeling and quantification to obtain realistic results when predicting the behavior and reliability of engineering structures and systems. But the modeling and quantification is complicated by the characteristics of the available information, which involves, for example, sparse data, poor measurements and subjective information. This raises the question whether the available information is sufficient for probabilistic modeling or rather suggests a set-theoretical approach. The framework of imprecise probabilities provides a mathematical basis to deal with these problems which …

Inkjet Based Personalized Screening Platform For Cancer Therapy, Jorge Ivan Rodriguez

Open Access Theses & Dissertations

The new paradigm of personalized medicine is beginning to affect clinical practice. In particular, many of the advances in genomics and proteomics have made personalized screening and therapeutic inventions possible. On chip, cellomics approaches to screening and intervention are becoming more commonplace. Cancer therapies may benefit from the rise in `-omics' technologies. In addition, the availability of rapid screening data is crucial to mitigate cancer propagation and increase the possibility of patient recovery. This study is an endeavor to develop a cellomic anticancer drug screening process based on inkjet printing. Previous research has demonstrated that inkjet based screening can reliably …

3d Printing For The Rapid Prototyping Of Structural Electronics, Rodolfo Salas

Open Access Theses & Dissertations

In business, the time required to shepherd a new product through the phases of concept, design, prototypes, through manufacture and finally making the product available for sale (together known as: Time to Market) is critical to the success and profitability of the next generation of products. The use of relatively new technologies, known as 3D Printing, which allow the fabrication of complex tridimensional shapes within hours of a completed CAD design without the need for tooling or molds, has significantly reduced the time required for a designer to physically hold a part designed only hours before and to perform form …

Reduced-Order Modeling Using Orthogonal And Bi-Orthogonal Wavelet Transforms, Miguel Hernandez Iv

Open Access Theses & Dissertations

It is well known that model reduction methods borrow techniques typically found in data compression, and current state-of-the-art techniques for data compression are based on the wavelet transform. Given these facts, it is surprising that model reduction using wavelets has not received much attention and has not been adequately addressed in the literature. This research seeks to determine if wavelets can be used for model reduction and if wavelet model reduction is a viable alternative to existing model reduction methods.

In this work we propose a novel method for model reduction using wavelets. Specifically, we introduce techniques for deriving wavelet …

Structural, Optical And Electrical Properties Of Yttrium-Doped Hafnium Oxide Nanocrystalline Thin Films, Abhilash Kongu

Open Access Theses & Dissertations

Hafnium oxide (HfO2) has emerged as the most promising high-k dielectric for Metal-Oxide-Semiconductor (MOS) devices and has been highlighted as the most suitable dielectric materials to replace silicon oxide because of its comprehensive performance. In the present research, yttrium-doped HfO2 (YDH) thin films were fabricated using RF magnetron sputter deposition onto Si (100) and quartz with a variable thickness. Cross-sectional scanning electron microscopy coupled with Filmetrics revealed that film thickness values range from 700 A° to 7500 A°. Electrical properties such as AC Resistivity and current-voltage (I-V) characteristics of YDH films were studied. YDH films that were relatively thin (<1500 A°) crystallized in monoclinic phase while thicker films crystallized in cubic phase. The band gap (Eg) of the films was calculated from the optical measurements. The band gap was found to be ∼5.60 eV for monoclinic while it is ∼6.05 eV for cubic phase of YDH films. Frequency dependence of the electrical resistivity (ρac) and the total conductivity of the films were measured. Resistivity decreased (by three orders of magnitude) with increasing frequency from 100 Hz to 1 MHz, attributed due to the hopping mechanism in YDH films. Whereas, while ρac∼1Ω-m at low frequencies (100 Hz), it decreased to ∼ 104 Ω-cm at higher frequencies (1 MHz). Aluminum (Al) metal electrodes were deposited to fabricate a thin film capacitor with YDH layer as dielectric film thereby employing Al-YDH-Si capacitor structure. The results indicate that the capacitance of the films decrease with increasing film thickness. A detailed analysis of the electrical characteristics of YDH films is presented.

Investigation Of The Radiative Heat Release Factor Of Premixed Oxy-Syngas Flames, Martin De La Torre

Open Access Theses & Dissertations

A significant part of the United States is being powered by combustion devises relying on coal since it is abundant and is a high emitting source of electricity per unit energy, however; the burning of this fuel is responsible for a significant contribution for the pollutant emissions causing global warming. Because coal is one of the main sources of energy in the U.S. and around the globe, the scientific community has been investigating ways to meet current and future governmental emission requirements. It is now well established that radiating heat from the flame is a major contributor of the heat …

A Case Study Towards Verification Of The Utility Of Analytical Models In Selecting Checkpoint Intervals, Michael Joseph Harney

Open Access Theses & Dissertations

As high performance computing (HPC) systems grow larger, with increasing numbers of components, failures become more common. Codes that utilize large numbers of nodes and run for long periods of time must take such failures into account and adopt fault tolerance mechanisms to avoid loss of computation and, thus, system utilization. One of those mechanisms is checkpoint/restart. Although analytical models exist to guide users in the selection of an appropriate checkpoint interval, these models are based on assumptions that may not always be true. This thesis examines some of these assumptions, in particular, the consistency of parameters like Mean Time …

A Method To Reduce Plastic Shrinkage Cracking Of Concrete Using Re-Vibration Technique, Mustafa Abushaala Aldalinsi

Open Access Theses & Dissertations

One of the problems that reduce durability; thus, performance of concrete is the development of plastic shrinkage cracking (PSC). Traditionally, the development of PSC has been minimized by controlling its exposure to weather conditions or by adding fibers. In this study, concrete re-vibration was used as an alternative technique to control PSC because of the limited availability of fibers in the developing countries. In this study, the wait time after slab casting and before vibration was selected to be 90 minutes while length of re-vibration time was varied from 15 to 45 seconds. Also, the water-cement ratios were selected to …

Phosphoric Acid Based Solar Absorber Coatings, Flor Gallegos

Open Access Theses & Dissertations

Solar thermal energy technology has become a successful part of today's world's energy supply. It is a growing field with new applications and better equipment designs every year. High-performance solar heating depends on improved coatings that are designed to maximize absorption and minimize reflection of the sun's radiant heat. Solar absorber coatings for applications such as solar domestic water heating are already available; however the cost and energy efficiency can be improved. This improvement can be made by minimizing cost if solar absorber coatings can be applied to steel at low cost. The work conducted in this thesis research was …

Microstructure And Mechanical Properties Of Titanium Nitride Optical Coatings Made By Dc Magnetron Sputtering, Gustavo Martinez

Open Access Theses & Dissertations

Titanium nitride (TiNx) thin films were grown by DC (Direct Current) magnetron sputtering method onto Si(100) substrates by varying time of deposition to produce films with variable thickness (dTiN) in the range of 20-120 nm. The grown TiNx films were characterized by studying their structure, composition, and mechanical properties. Nuclear reaction analysis (NRA) combined with Rutherford backscattering spectrometry (RBS) analyses indicate that the grown films were stoichiometric TiN. Grazing incidence X-ray diffraction (GIXRD) measurements indicate that the texturing of the TiN films changes as a function of dTiN. The (111) and (002) peaks appear initially; with increasing dTiN, (111) becomes …

Characterization Of Particulate Matter Concentrations (Pm10, Pm10-2.5, And Pm2.5) At High-Altitude School And Residential Mircroenvironments In Quito, Ecuador, Teresa Montoya

Open Access Theses & Dissertations

Air quality issues in Latin American countries are especially challenging because of the limited availability of resources to address them, lack of stringent standards and the rapid and uncontrolled growth of their cities increasing the number of vehicles on the road and the expansion of the industry. In particular, the city of Quito, Ecuador exacerbates its environmental issues by its high-altitude (2800 m above sea level) coupled by its location around a mountain valley and frequent temperature inversions.

This study focused on evaluating the spatial variation of the PM concentrations and the effectiveness of a central monitoring network in representing …

Asynchronous Logic Design With Increased Fault Tolerance And Optimized For Subthreshold Operation, Ivan Santos

Open Access Theses & Dissertations

Synchronization has always been an essential feature in electronic circuits, in which functionality is achieved by an appropriate flow of data with respect to time. An ideal concept of logic design would require every operation to happen instantly; however, the application of this principle to electronics is governed by the laws of physics, which influence the time to execute a process. In fact, the speed at which a microprocessor can perform logic operations is determined by the time that charging and discharging capacitive loads requires, and the time that electric signals spend when traveling through the circuitry. Consequently, the variation …

Assessment And Evaluation Of The Dynamic Behavior Of Muscles With Special Reference To Subjects With Diabetes Mellitus, Jorge Garza-Ulloa

Open Access Theses & Dissertations

Diabetes mellitus (simply diabetes) is a group of metabolic diseases in which a person has high blood sugar, either because the body does not produce enough insulin, or because cells do not respond to the insulin that is produced. Each year, the costs of diabetes rise. Diabetes and its complications cost our national economy. Two new methods are proposed to measure the diabetes implications in the muscles of lower body: Muscle energy expenditure analysis based on the detection of muscle transition-to-fatigue, and Natural Fuzzy logic method for differential analysis in muscle/joint. Then the results are compared with the traditional method …

Assessment Of Abaqus Capabilities For Crack Growth And Calculation Of Energy Release Rate, Luis Alonso Hernandez

Open Access Theses & Dissertations

The purpose of this study was to benchmark ABAQUS modeling capabilities for crack propagation and calculation of energy release rate against closed-form analytical solutions. The crack growth capability for this study was evaluated using the following techniques: virtual crack closure technique (VCCT), X-FEM coupled with VCCT, and X-FEM coupled with cohesive segments. The capability of calculating the energy release rate was assessed by using the J-integral routine. A Double Cantilever Beam (DCB) specimen was used to conduct the study for mode I propagation, and a mixed mode bending (MMB) specimen was used to study the propagation for mixed mode I/II …

Model Fusion: A New Approach To Processing Heterogeneous Data, Omar Ochoa

Open Access Theses & Dissertations

In many practical situations, it is necessary to extract

information from data of different types. For example, in geosciences, several sources of data can be used to determine the interior structure of the earth: the first arriving waves from earthquakes and from man-made sources, measurements of the earth's gravity field, measurements of the dispersion of surface waves generated by earthquakes, etc. At present, most existing data processing techniques deal only with data of one type.

A joint use of all the information derived from multiple types of data sources is an important theoretical and practical challenge. Such a joint use …