Engineering Commons^™

Irregularities In The Dynamics Of Large Networks: Cases On Social Networks And The Internet, Dheeman Saha, Abdullah Mueen, Shuang Luan, Afsah Anwar, Yangsun Hong

Computer Science ETDs

Dynamic networks capture evolving relationships among entities, and irregularities in their behavior often signal significant events. This dissertation investigates such irregularities across social and infrastructural networks. First, we analyze Twitter (prior to its rebranding to X) to characterize influencers, introducing a follower-overlap similarity measure that identifies micro-influencers beyond content-based methods.

We then examine election-related irregularities by comparing suspended and non-suspended accounts during the 2020 U.S. presidential election, revealing behavioral patterns linked to misinformation and coordinated manipulation.

Next, we develop an algorithm to infer post-specific diffusion networks, reconstructing who-saw-from-whom pathways for tweets at scale. This method uncovers structural differences in diffusion …

Thermally Stable And Regenerable Catalysts For Alkane Dehydrogenation, Ryan Alcala

Chemical and Biological Engineering ETDs

Shale gas upgrading reactions have gained much interest since production dramatically increased around 2010. These reactions occur at high temperatures (600°C +) where undesired processes like sintering and/or coking often occur. It is of interest to use materials like ceria as a catalyst support in these alkane conversion reactions, but ceria is prone to losing active surface area through sintering. It is also of interest to understand the behavior of PtMn and PtZn intermetallics for propane dehydrogenation as they have been identified as some of the best catalysts by theory-based prediction in literature. This manuscript explores ways of utilizing ceria’s …

Emulation Of Orbital Dynamics And Control Of Fully Actuated Seven-Axis Prismatic Joint Systems, Bennett Russell

Electrical and Computer Engineering ETDs

This thesis details the system modeling, design, control, simulation, construction, and testing of a fully-actuated seven axis prismatic joint system created for the primary purpose of emulating on-orbit maintenance tasks. Additionally, it seeks to further research of space-based control schemas and investigate stiction as a case study with a mountable hybrid hinge system that emulates stiction. Controllers are evaluated under common limits and metrics, including time to escape, overshoot, mechanical work, and limit-exceedance counts. Comparisons span a PID baseline, deterministic MPC/MPPI, and a probabilistic POMDP policy. Results verify the emulator and hybrid hinge meet the intended design criteria and show …

“Bridging The Gap To Midwave Infrared Event-Based Sensors: Design, Sensitivity, And Radiation-Hardness Characterization Of A Single-Pixel Iii-V Event-Based Infrared Sensor For Space Applications, Zinah M. Alsaad

Electrical and Computer Engineering ETDs

Event-based sensing presents a revolutionary paradigm shift for next-generation space surveillance systems, where power consumption is an ever-worsening constraint as temporal resolution demands increase. In addition to reduced power consumption, low latency, and wide dynamic range, the event-based sensor fundamentally only produces data when there is a change in illumination from which events are generated; no data is produced if the scene remains static. With their event-based datastream being inherently focused on the dynamic information of the scene, they are particularly well-suited to machine vision and autonomous sensing applications. While these sensors have many compelling advantages, there are presently no …

Recreating Fiber Recruitment With Fiber Recruitment Using Additive Manufacturing, Natalia D. Mciver

Biomedical Engineering ETDs

Injured ligaments are often repaired with tendon grafts which may over or under constrain the joint; there is a need for an artificial graft option with the mechanical properties of a native ligament. Crimped fibers within ligaments allow for recruitment which means the viscoelastic properties of stress relaxation and creep are not inversely related. A feasibility study using ACLs and large-scale crimp models to study viscoelasticity, led to an in-depth analysis of the scapholunate interosseous ligament. Using the Modified Kelvin spring-dashpot model, for describing viscoelasticity with a variable stiffness property (time dependent fiber recruitment), we defined the relationship between creep …

Empowering Wireless Mesh Uav Networks Through Software-Defined Networking, Hieu Quang

Electrical and Computer Engineering ETDs

Unmanned Aerial Vehicles (UAVs) have been widely deployed in applications such as environmental monitoring, disaster response, and surveillance. Effective coordination between UAVs depends on low-latency inter-UAV communication to exchange state information, decisions, and other critical data. UAV networks are inherently dynamic which necessitates a framework capable of handling scenarios such as traffic re-routing, and resilience to communication failures. To address the challenges of managing dynamic UAV networks, this thesis proposes a dual network approach composed of three main components. First, the Better Approach to Mobile Ad-hoc Networking (BATMAN) protocol is used to enable communication among UAVs. Second, the OpenFlow protocol …

Design And Evaluation Of The Influence Of Mutual Induction On Microbial Electrolysis Cell Performance And Biogas Production, Ashley L. Blackwell

Civil Engineering ETDs

Microbial electrolysis cells (MECs) present a pathway for energy recovery in wastewater treatment by converting organic substrates into methane or hydrogen. Traditional MEC designs typically rely on physical electrode contacts and expensive materials, which restrict their scalability. This study introduces the first induction-based MEC that uses mutual inductance between an external copper wrap and an internal coil to generate a fluctuating electrical potential, removing the need for expensive electrodes. The induction-stimulated reactor showed faster total organic carbon removal and a higher CH4/CO2 ratio compared to a conventional anaerobic digester, indicating improved carbon-to-methane conversion, although total gas yield remained similar. Microbial …

Graph Based Planning With Guarantees, Trazon Tyrik Jimerson

Mechanical Engineering ETDs

This thesis presents two graph-based methods with formal guarantees for motion planning and routing. First, the invariant-set motion planner (ISMP), which uses constraint admissible positive invariant (CAPI) sets of closed-loop dynamics, is adapted for spacecraft attitude planning to avoid moving keep-out zones. Contributions include time bounds for maneuvers via exponential stability, a single-stage reachability graph from one-step backward reachable CAPI sets, and its multi-stage expansion to certify node safety over time. Simulations verify safe attitude control with moving obstacles. Second, we formulate a convex optimization problem over a network for evacuation planning with operational constraints such as helicopter capacity and …

Simulation Of Stress Induced By Laser Heating Of Glass, Austin Marsh Schuberth

Mechanical Engineering ETDs

The purpose of this work is to create a method for accurately simulating the stresses due to heating from femtosecond laser pulses. Our work aims to calculate stress and strain in glass exposed to laser pulses used for laser welding. We simulate the effects of thermal heating, thermal expansion, and the viscoelasticity of glass for a single straight weld bead. The laser heating of K9 borosilicate glass was simulated using Finite Element Analysis (FEA). Thermal models developed by other researchers in earlier work were utilized in calculating the temperatures due to the laser exposure to the glass material. 2D simulations …

Real-Time Frequency Tuning Of Kinetic Energy Harvesters Via System Mass Adjustment, Rahul Adhikari

Mechanical Engineering ETDs

This research presents a method for real-time frequency tuning of piezoelectric kinetic energy harvesters through system-mass adjustment. Custom 3D-printed proof masses with cavity arrays were used to redistribute solid or liquid mass, enabling controlled modification of resonant frequency. Experimental studies using microparticles and liquids—including water, silicone oil, and sodium polytungstate—demonstrated an achievable tuning range of 115.27 Hz with sub-hertz resolution (< 0.1 Hz), confirming precise and repeatable frequency control. Finite-element modeling guided design optimization, while a microfluidic channel system enabled automated liquid filling for real-time operation. A MATLAB-based EH_Tuning application was developed to visualize and predict frequency responses. The combined …

Design And Development Of Evacuated Photovoltaic-Thermal Systems For Efficient Cogeneration Of Heat And Electricity, Behnam Roshanzadeh

Mechanical Engineering ETDs

In conventional PV systems, most of the solar energy is dissipated into the environment as heat. Accordingly, hybrid Photovoltaic-thermal systems have been developed to utilize the waste heat from PV cells for various thermal applications. However, most PVT systems suffer from low thermal performance compared to solar thermal collectors, as the absorber plate in PVT systems is partially or fully covered by PV cells. This dissertation focuses on improving the thermal performance of PVT systems by introducing the evacuated PVT systems.

An evacuated-tube PVT system was designed and simulated for domestic hot water supply. The evacuated-tube PVT system demonstrated 40% …

Application Of Bimetallic Transition Metal Oxides Electrocatalysts For Li-Co2 Batteries And Li-O2 Batteries, Jianda Wang

Chemical and Biological Engineering ETDs

Li-ion batteries are the dominant commercial rechargeable batteries nowadays, which are used in electronic devices and electrified transportation widely. However, undesirable energy density of Li-ion batteries prohibits them from meeting requirements of new generation electronic devices. Therefore, it is important to find more alternative electronic energy storage systems with higher capacity. Fortunately, Li-CO2 batteries, featured high capacity and ability to convert CO2, have become a promising candidate to replace Li-ion batteries. In addition, Li-O2 batteries also attract people’s attention due to their high energy density and low cost. However, Li-CO2 batteries and Li-O2 batteries both face challenges of terrible cycle …

Analysis Of Heat Transfer And Pressure Drops Associated With Twisted Tube Heat Exchangers, Braden Foderaro

Nuclear Engineering ETDs

Several studies have been done on the effects of twisted tubes in heat exchangers, including the correlations that relate the flow parameters to the heat transfer and pressure drop experienced. These studies are new, with the earliest being performed in 1982. As such, there are many correlations covering only certain flow parameters and geometrical configurations such as the Reynolds number and modified Froude number.

This thesis attempts to cover flow regimes and tube geometries not yet studied and yield correlations. Data are gathered from heat exchangers featuring twisted tubes with water as the working fluid. It is noticed that the …

Non-Destructive Characterization Of Ion Irradiated Yttrium Hydride For Microreactor Applications, Ryan E. Pena

Nuclear Engineering ETDs

As energy demands increase, nuclear reactors, especially microreactors, become a promising energy source. These reactors run at high temperatures (>280°C), requiring moderators that can endure these environments. Yttrium hydride is a possible moderator, but little is known about the material’s phase stability and hydrogen retention under irradiation. Through the use of a gold ion beam, samples with stoichiometries ranging from 1.6 to 2.0 were irradiated and tested. Through Vickers hardness testing, a model was created showing a correlation between hydrogen content and hardness. Raman spectroscopy showed high temperature and irradiated samples have significant hydrogen loss. XRD quantified this hydrogen …

Sequential Low Dose Proton Irradiation And Nanomechanical Testing To Understand Mechanical And Microstructural Property Changes In Alloy 709, Abhishek Kc

Nuclear Engineering ETDs

Alloy 709, a 20Cr25Ni alloy, is an advanced austenitic steel designed for next generation sodium fast reactors. Preliminary studies have shown the potential of Alloy 709 in sodium fast reactors. In this study, Precipitate Treated Alloy 709 specimens are irradiated with 2 MeV H⁺ at 500 °C from 0.0057 dpa to 1.7 dpa. Electron microscopy characterization techniques are used to understand the effects of radiation on mechanical properties as well as microstructure of Alloy 709. The microstructure did not show formation of voids, amorphization of precipitates, or increase in grain size up to 1.7 dpa. Correspondingly nano-indentation and micro-pillar …

Coupled Adjoint-Based Perturbation Theory For Dynamics And Heat Transfer Multiphysics For Nuclear Transients, Alexis Maldonado

Nuclear Engineering ETDs

Nuclear reactor multiphysics modeling and simulation (M&S) enable advanced reactor design by analyzing how systems will react over time to various configurations, scenarios, and perturbations. However, high-fidelity coupled transient M&S for reactor cores are computationally expensive, making robust analyses challenging. This work develops a Coupled Adjoint-based Perturbation Theory for dynAmIcs and heat traNsfer (CAPTAIN) framework to rapidly quantify the impact of uncertainty to overall transient responses by generating sensitivity coefficients for temperature, power, and delayed neutron precursor concentrations using forward and adjoint solutions. This work presents an initial proof of principle, verified with direct perturbations to several inputs. Furthermore, this …

A Risk-Informed Approach To Performing The Pre-Closure Safety Analysis For The Deep Borehole Disposal Of Radioactive Waste, Jennifer Elizabeth Leute

Nuclear Engineering ETDs

Deep borehole disposal is an emerging concept which involves disposing of radioactive

waste in boreholes several kilometers deep then backfilling to minimize radionuclide

transport and distribute weight. Unfortunately, little documentation exists on borehole

safety case development, especially for pre-closure operations. This study aims to close

this gap by proposing a graded approach matrix based on consequence, maturity, and

complexity. Two case studies are used to demonstrate this application: Hanford CsCl

capsules and spent PWR assemblies. Simulations are used to predict potential for dose

exposure, revealing CsCl capsules have a much higher potential for being above the 5

rem public dose …

A Bump Hunting Approach To Finding Interpretable Data Pockets, Tushar Ojha

Electrical and Computer Engineering ETDs

This dissertation approaches the problem of extracting simple interpretations from local regions of data. This is sometimes called bump hunting because the local regions of interest have a high concentration of a particular output value. This work develops a bump hunting method for discrete-valued tabular data where each bump is modeled by a rectangular region of the input data space so its rule-based description admits a simple logical interpretation that can inform decisions. This method is designed for labeled data where each input feature has a distinct meaning that may or may not be related to the output, and the …

Fedchae: Federated Learning With Client Clustering And Hybrid Adaptive Engagement, Chaeeun Park

Electrical and Computer Engineering ETDs

As machine learning adoption expands, data privacy concerns have grown significantly. Federated Learning (FL) addresses this challenge by allowing clients to train locally and share only their model parameters with the server. However, conventional FL methods such as FedAvg suffer from high communication overhead, as all clients must participate in every global round.

This paper proposes FedChae (Federated Learning with Client Clustering and Hybrid Adaptive Engagement) to balance communication efficiency and model accuracy. FedChae alternates between Grouping Rounds, where all clients perform clustering, and Conventional Rounds, where one client per cluster updates the model.

Simulations with 100 clients using Multi-class …

Pria: Process Risk Identification And Analysis, Raymond Fasano

Nuclear Engineering ETDs

This dissertation proposes and evaluates two approaches, with-in a Process Risk and Analysis (PRIA) framework, that advance data-driven hazard discovery in complex cyber-physical systems. First, a transferability-based clustering method groups subspace-identified segments into operational modes, prioritizing cross-predictive performance over raw feature proximity. Second, a Neural Switching Linear Dynamical System (NeuralSLDS) model anchors learning in identified state-space models with Bayesian residuals, calibrated predictive uncertainty, and context-aware operating mode transitions. Together, these methods generate physics-informed, probabilistic world models that can support model-in-the-loop analysis of hazardous trajectories. The approach is validated on a simulated point-kinetics reactor and a centrifugal chiller dataset, demonstrating coherent …

Exploratory Study Of Semiconductor Nanomembranes In Em Applications, Grant D. Heileman

Electrical and Computer Engineering ETDs

Antenna systems are a cornerstone of modern technologies, playing an increasingly vital role in their advancement. As demand for compact, high-performance, and adaptable communication platforms grows reconfigurable antenna technologies are becoming essential. This research explores a novel front-end reconfigurable antenna system (FERAS) architecture that leverages the mechanical flexibility and photoconductive behavior of semiconductor nanomembrane (SNM) devices. By exploiting the emergent properties of ultra-thin silicon (Si) or gallium arsenide (GaAs) nanomaterials and optically exciting these samples using vertical-cavity surface-emitting laser (VCSEL) arrays, this study develops lightweight, low-cost, deployable antenna structures for satellite communications, remote sensing, GPS, and radar. Despite their significant …

Volumetric Imaging Of Cellular Dynamics Using Light-Sheet Microscopy: From Subcellular Structures To Whole Organisms, Md Nasful Huda Prince

Optical Science and Engineering ETDs

Advancing biomedical imaging requires platforms that combine high-resolution, speed, and stability across biological scales. This dissertation presents three innovations designed to address limitations of conventional light-sheet and oblique plane imaging. First, we introduce Reflected Inline Detection in Epi-Oblique Plane Microscopy (RIDE-OPM), a compact and drift-resistant system that eliminates a tertiary detection path while maintaining alignment flexibility, enabling robust long-term live imaging. Second, we present a high-speed Axially Swept Light-Sheet Microscopy (ASLM) platform for cleared tissues, using dual foci and synchronized sweeping to achieve isotropic sub-micron resolution at up to 40 frames-per-second, a fourfold improvement over standard ASLM. Integrated with a …

Studies Of Electrical Breakdown Of High-Pressure Ultra-Zero Air, Seth Miller

Electrical and Computer Engineering ETDs

High-pressure ultra-zero air is being evaluated to enhance switch performance and serve as a potential replacement for SF$_6$ in high-voltage switches, aiming to reduce reliance on costly insulating gases with supply chain and environmental concerns. There are still uncertainties about the dominant breakdown mechanisms of ultra-zero air in the high-pressure regime. The classical equations for breakdown describing Paschen curves appear to not be valid above 500 psia. In order to better understand gas breakdown in the high-pressure regime, this dissertation is evaluating the basic gas physics breakdown using both uniform and nonuniform-field electrode designs. The data has been collected to …

Techno-Economic Analysis (Tea) And Life-Cycle Assessment (Lca) Of Sustainable Aviation Fuel (Saf) Production Through Circular Economy (Ce) Practices: A Focus On Supply Chain Optimization And Policy Implications, Edmund Gyandoh

Chemical and Biological Engineering ETDs

This study provides a comprehensive systems-level evaluation of an integrated circular biorefinery for sustainable aviation fuel (SAF) production. Employing supply chain optimization, technoeconomic analysis, lifecycle analysis, policy modeling, and multicriteria decision analysis, the research assesses technical feasibility, economic viability, and environmental performance. The circular economy model demonstrates exceptional resource efficiency, achieving a 92.3% overall circularity score with strong material recycling, water reuse, waste minimization, and near-complete energy recovery, resulting in net-negative carbon emissions and net energy export. Scaling the facility to commercial capacity (500 million liters per year) enables significant economic improvements. The minimum fuel selling price (MFSP) decreases from …

Exploring Immune System Through Computational Modeling: A Comprehensive Study Of Lymph Nodes And Immune Response Scaling, Vaccine Efficacy, And Large-Scale Extreme First Passage Time, Jannatul Ferdous

Computer Science ETDs

The adaptive immune response is a complex defense mechanism that develops over time to recognize and eliminate pathogens with remarkable precision and durability. This dissertation investigates the dynamics, scaling, and efficiency of the adaptive immune response through a synthesis of computational modeling, mathematical analysis, and agent-based simulations. First, we analyze the topology of the lymphatic network and investigate the T cell search time to find the lymph node that is containing the matching dendritic cell. Second we show how the scaling of lymph node number and volume with body mass, leads to scale-invariant search times for T cells locating antigen-bearing …

Optimization And Acceleration Of Puf Design Through Reduced Order Standard Cell Modeling, Ian Z. Wilcox

Electrical and Computer Engineering ETDs

Application Specific Integrated Circuit (ASIC) designs continue to scale with ever increasing complexity and device counts in the billions. Demand for scalable high-fidelity simulations of these systems drives the need for the development of novel modeling capabilities. This research formulates a non-intrusive model order reduc-tion (MOR) framework, called PUF-ROMS, to accelerate and optimize the design and analysis of physical unclonable functions (PUFs) on ASICs. The primary goals of PUF-ROMS are to estimate entropy and temperature-voltage noise (TV-noise) of circuit structures used in the design in an accelerated evaluation environment to enable designers to explore architecture options with the goal of …

Network Intelligence For Next-Generation Wireless Networks: Advancing Distribution And Coordination, Yonatan Melese Worku

Electrical and Computer Engineering ETDs

Next-generation wireless networks, encompassing 6G and beyond, face rigorous demands for ultra-low latency, ubiquitous connectivity, exceptionally high data rates, and robust security, necessitating innovative approaches to resource optimization and network protection. This dissertation proposes a pioneering framework that synergizes advanced methodologies—deep reinforcement learning, deep learning, blockchain, and multi-agent systems—to address these challenges. Distributed architectures, underpinned by AI-driven multi-agent systems, form the backbone of this framework, enabling seamless integration and intelligent orchestration across diverse domains. The research advances IoT-based systems leveraging machine learning for resource efficiency in healthcare applications, develops reinforcement learning-driven frameworks to optimize energy and coverage for Unmanned Aerial …

Finite Element Investigation Of Blast Load Responses In Nuclear Power Plant Containment Structures, Janak Raj Awasthi

Civil Engineering ETDs

Some significant incidents like the Chernobyl disaster (1986), the Fukushima Daiichi hydrogen explosion (2011), and some frequent military and terror threats to the nuclear Power plant structures have led to studying the capacity of power plant structures to withstand blast loadings. From this research, even one-third of the loss of the coolant is enough to damage the power plant structure. Crack starts from the wall and propagates toward the top of the dome and the foundation. The external blast shows high damage symptoms near the foundation area. Most of the steel members, including the rebars, Liner, and Tendons, showed high …

Predicting Leakage From Nuclear Material Containers At Los Alamos National Laboratory Through Drop Testing, Leak Testing, Finite Element Analysis And Digital Image Correlation, Jude M. Oka, Yu-Lin Shen, Osman Anderoglu, Pankaj Kumar, Rajendra Vaidya

Mechanical Engineering ETDs

Los Alamos National Laboratory (LANL) relies on containment vessels to safely manage special nuclear material. These containers are subject to rigorous testing—such as drop, fire, and water ingress testing—to ensure integrity under adverse conditions. While elastomer-based seals are well studied, metal-to-metal sealing mechanisms remain under investigation, particularly under dynamic loading. This research focuses on the relationship between container mating surfaces and impact loading through drop testing. Finite Element Analysis (FEA) models were developed and validated using Digital Image Correlation (DIC) to measure strain during impact. Drop tests at varying heights showed strong correlation between FEA and DIC results, confirming the …

Networked Systems: Synchronization, Decomposition And Transient Dynamics, Amirhossein Nazerian

Mechanical Engineering ETDs

This dissertation investigates synchronization, transient dynamics, control, and signal amplification in networked dynamical systems. First, it examines complete and cluster synchronization, including cases with large parametric mismatches, in both natural (e.g., brain networks, fireflies) and technological systems (e.g., power grids, robotics). Second, it studies transient dynamics in consensus processes, designing synchronization strategies that link reactivity, contraction theory, and Lyapunov exponents. Third, it addresses the computational limits of Model Predictive Control (MPC) for large networks by introducing an algebraic decomposition method that enables parallel online computation of smaller subproblems, enhancing MPC performance under hardware constraints. Finally, it analyzes the structural role …