Engineering Commons^™

Molecular Dynamics Of Soy-Protein Isolate Films Plasticized By Water And Glycerol, S.-G. Choi, K. M. Kim, Milford Hanna, Curtis L. Weller, W. L. Kerr

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The effects of water and glycerol on the molecular mobility of a soy-protein isolate (SPI)-based film were investigated using ¹H nuclear magnetic resonance (NMR). SPI-films were prepared with different glycerol contents and equilibrated to various levels of water activity (a_w). The distributed transverse relaxation of film samples showed 2 distinct components: a solid-like fraction (T_2s*) and a liquid-like fraction (T_2m*). The peak T_2s* values of films with lower glycerol concentration were more sensitive to variation in aw. As a_w increased, the change of solid-like to liquid-like fraction was observed in …

Influence Of Sorghum Wax, Glycerin, And Sorbitol On Physical Properties Of Soy Protein Isolate Films, Ki Myong Kim, David B. Marx, Curtis Weller, Milford Hanna

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Sorghum wax, sorbitol, glycerin, and soy protein isolate (SPI) composite films were prepared. Effects of sorghum wax, sorbitol, and glycerin concentrations on various films were evaluated using response surface methodology. All independent variables significantly (P < 0.05) affected film water vapor permeability (WVP), tensile strength (TS), elongation at break (E), total color difference, and total soluble matter (TSM). Increasing the sorghum wax concentration decreased WVP and E. As sorbitol content increased in the composite films, WVP and TS increased. Sorbitol had a critical point of 2–5 g/5 g SPI for low values of TSM. The addition of sorbitol contributed more to the properties of the film than did glycerin.

Effects Of Oxide Coating And Selected Cations On Nitrate Reduction By Iron Metal, Yong H. Huang, Tian Zhang, Patrick J. Shea, Steve D. Comfort

Department of Civil and Environmental Engineering: Faculty Publications

Under anoxic conditions, zerovalent iron (Fe⁰) reduces nitrate to and magnetite (Fe₃O₄) is produced at near-neutral pH. removal was most rapid at low pH (2–4); however, the formation of a black oxide film at pH 5 to 8 temporarily halted or slowed reaction unless the system was augmented with Fe²⁺, Cu²⁺, or Al³⁺. Bathing the corroding Fe⁰ in a Fe²⁺ solution greatly enhanced nitrate reduction at near-neutral pH and coincided with the formation of a black precipitate. X-ray diffractometry and scanning electron microscopy confirmed that both …

Dec 2002, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Report from Director on Leave Development Projects Liason Report

Acuta Enews December 2002, Vol 31, No. 12

ACUTA Newsletters

In This Issue

lmpact of Mobitity on Higher Education................ Jeanne Jansenius, Univ. of the South

Awareness: the First Step to Safety....................... Diane Santerelli, www.wireville.com

Tech Talk: Honeypot: Sweet Revenge Against Hackers?................... Kevin Tanzillo, Dux Public Relations

DC Update...................... Whitney Johnson, Retired, Northern Michigan Univ.

Donate-A-Phone Program

Download Movies

TEACH Act Signed lnto Law...................... Jeri Semer, CAE, Executive Director

Welcome New Members

Thanks to Our Sponsors

Auger Timing Effects On Performance Of A Combine Unloading System, Todd Philip Cole

Open Access Master's Theses (through 2010)

Performance effects were measured on a combine unloading system using three different auger timing settings.Performance measures included maximum startup torque, mean operating torque, standard deviation of the operating torque, flow rate of grain through the system, and mechanical damage to the grain.The performance effects were measured with the system unloading corn and soybeans.

The data were statistically analyzed to check for interactions between the grains and differences between the timings.Using an alpha value of 0.1 it was found that timing 1 for both grains had a 3% (<2.4 L/s) higher flow rate over timings 2 and 3.Timings 1 and 2 for both grains had higher maximum startup torque, about 10% (60 N·m) more torque required than timing 3.In soybeans, timings 2 and 3 also had the smallest standard deviation in operating torque, about 30% (20 N·m) less than timing 1.We were unable to detect any differences in mechanical damage to corn or soybeans as a result of unloading auger timing.These findings suggest that timing 3, with the cross augers lagging 90° behind the vertical unloading auger, may require less maximum startup torque and less variation in torque for the cross augers to effectively fill the loosely filled space left after the vertical auger lifts the grain without extra torque effects of having the augers push against each other as they do in timing 1.

Advisor: Michael F. Kocher

Acuta Enews November 2002, Vol 31, No. 11

ACUTA Newsletters

In This Issue

Quality of Service: Different Strokes for Different Folks.................... Jeanne Jansenius, Univ,. of the South

Internet Telecommunications Relay Services........................ Dave Ostrom, Washington State University

Sailing the Seven "C"s.............................. Mick McKellar, Michigan Technological University

Thanks to Exhibitors for 2007

Tech Talk: Let's Get Shaking on SALT Applications................. Kevin Tanzillo, Dux Public Relations

DC Update....................... Whitney Johnson, Retired, Northern Michigan Univ.

Board Report........................ John Bradley, Rensselaer Polytechnic lnstitute

New ACUTA Web Site Benefits....................... Jeri Semer, CAE' Executive Director

Welcome New Members

Comparison Of Radiated Power From Structurally Different Violins, Lily M. Wang, Courtney B. Burroughs

Durham School of Architectural Engineering and Construction: Faculty Publications

The acoustic power has been determined from intensity measurements on three structurally different violins: a Scherl and Roth student violin, Hutchins' SUS29S, and Hutchins' mezzo violin SUS 100. While each violin was bowed with an open-frame mechanical bowing machine, the intensity measurements were made by scanning each side of the bowing machine with an intensity probe. One-third octave band sound power levels of the acoustic radiation from each of the three instruments as each of the four open strings is bowed show that the structurally different mezzo violin produces greater power at low frequencies when the lowest (G) string is …

A Semi-Infinite Interfacial Crack Between Two Bonded Dissimilar Elastic Strips, Xiang-Fa Wu, E. Lilla, W.-S. Zou

Department of Engineering Mechanics: Faculty Publications

This paper is concerned with a semi-infinite interfacial crack between two bonded dissimilar elastic strips with equal thickness. Solutions for the complex stress intensity factor (SIF) and energy release rate (ERR) are obtained in closed form under in-plane deformations. During the procedure, the mixed boundary-value problem is reduced by means of the conformal mapping technique to the standard Riemann–Hilbert problem. In some limiting cases, the present solutions can cover the results found in literature.

Mineralization Of Manure Nutrients, Bahman Eghball, Brian J. Wienhold, John E. Gilley, Roger A. Eigenberg

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In order to apply manure or compost to fulfill the nutrient requirements of a crop, knowledge of the amount of nutrients mineralized following application is needed. Nutrient mineralization from applied manure depends on temperature, soil moisture, soil properties, manure characteristics, and microbial activity. Since these factors cannot be accurately predicted, nutrient mineralization from applied manure can only be approximated. Nitrogen (N) availability from applied manure includes the inorganic N (NO₃-N and NH₄-N) in manure plus the amount of organic N mineralized following application. Nitrogen mineralization differs for different manure types since the inorganic/organic fraction and quality …

Oct 2002, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Husker Harvest Days Fund Raising Interim Director

Optical Constants And Roughness Study Of Dc Magnetron Sputtered Iridium Films, Li Yan, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

Extremely smooth thin films of iridium have been deposited onto superpolished fused silica substrates using dc magnetron sputtering in an argon plasma. The influence of deposition process parameters on film microroughness has been investigated. In addition, film optical constants have been determined using variable angle spectroscopic ellipsometry, over the spectral range from vacuum ultraviolet to middle infrared (140 nm–35 μm). Because the Ir films were optically thick and the surface roughnesses were measured by atomic force microscopy then accounted for in the optical model, the as-determined film optical constants are expected to be the best available for Ir bulk metals, …

Screw Dislocation Interacting With An Interfacial Edge Crack Between Two Bonded Dissimilar Piezoelectric Wedges, Xiangfa Wu, Yuris A. Dzenis, Wen-Sheng Zou

Department of Engineering Mechanics: Faculty Publications

This letter is concerned with an interface edge crack interacting with a screw dislocation under antiplane mechanical and in-plane electric loading in a piezoelectric bimaterial wedge. In addition with a discontinuous electric potential across the slip plane, the dislocation is subjected to a line-force and a line-charge at the core. The out-of-plane displacement and electric potentials are obtained in closed-form on the basis of the conformal mapping technique and the solution for a screw dislocation in an infinite piezoelectric bimaterial with a semi-infinite interface crack. The intensity factors (IFs) and energy release rate (ERR) are obtained explicitly.

Multiscale Nature Of Hysteretic Phenomena: Application To Copt-Type Magnets, Kirill D. Belashchenko, Vladimir P. Antropov

Nebraska Center for Materials and Nanoscience: Faculty Publications

We suggest a workable approach for the description of multiscale magnetization reversal phenomena in nanoscale magnets and apply it to CoPt-type alloys. We show that their hysteretic properties are governed by two effects originating at different length scales: a peculiar splitting of domain walls at twin boundaries and their strong pinning at antiphase boundaries. We emphasize that such multiscale nature of hysteretic phenomena is a generic feature of nanoscale magnetic materials.

Acuta Enews October 2002, Vol 31, No. 10

ACUTA Newsletters

In This Issue

Convergence on Sewanee Campus.................... Jeanne Jansenius, Univ. of the South

Tech Talk Free Space Optics............................ Kevin Tanzillo, Dux Public Relations

Cabling: Asset or Liability?................... Diane Santarelli, wireville.com

DC Update.............................. Whitney Johnson, Retired, Northern Michigan Univ.

Higher Ed's Contribution to Cyberspace Security................. Jeri Semer, CAE, Executive Director

Board Report................... John Bradley, Rensselaer Polytechnic lnstitute

Welcome New Members

Nebraska Blueprint – Fall 2002

Nebraska Blueprint (Student Publication)

Table of Contents:

From the Editor

You Never Know Where the Road Will Lead – Civil engineering graduate student takes research on the road.

Feel the POWER! – Quarter-scale tractor team strives for excellence in competition and continues to move up in the ranks.

Independent Study Team Goes Robotic – The story behind the making of a robot by an undergraduate independent study team.

A Fine-Tuned Balance – Biological systems engineering student balances school and musical interests.

100 Hundred Years of Nebraska Blueprint – Serving engineering students of NU for a century, the Nebraska Blueprint celebrates its 100th Anniversary with …

Rectangular Bursting Energy Absorber, John D. Reid, John R. Rohde, Dean L. Sicking

Department of Mechanical and Materials Engineering: Faculty Publications

A bursting energy absorber System having an impact head, and energy absorption mechanism. The energy absorbing mechanism has a generally rectangular mandrel for rupturing cooperating thin-walled generally rectangular tubes in a controlled rupture to absorb impact forces for a colliding vehicle. A frame may be used to mount the System to a truck, trailer, guardrail, median barrier end treatment, or a crash cushion. Stress concetrators such as saw cuts or scoring may be incorporated into the absorption tubes to selectively control rupturing and energy dissipation. The mandrels may be tapered, rectangulary shaped with beveled edges to reduce frictional forces along …

An Approach To Sequence Dna Without Tagging, Sanjun Niu, Ravi F. Saraf

Papers in Biotechnology

Microarray technology is playing an increasingly important role in biology and medicine and its application to genomics for gene expression analysis has already reached the market with a variety of commercially available instruments. In these combinatorial analysis methods, known probe single-strand DNA (ssDNA) ‘primers’ are attached in clusters of typically 100 μm × 100 μm pixels. Each pixel of the array has a slightly different sequence. On exposure to ‘unknown’ target ssDNA, the pixels with the right complementary probe ssDNA sequence convert to double-stranded DNA (dsDNA) by a hybridization reaction. To transduct the conversion of the pixel to dsDNA, the …

Self-Assembled Networks With Neural Computing Attributes, Supriyo Bandyopadhyay, L. Menon, N. Kouklin, P. F. Williams, Natale J. Ianno

P. F. (Paul Frazer) Williams Publications

Two-dimensional arrays of vertical quantum wire Esaki tunnel diodes, laterally connected to their nearest neighbors by resistive/capacitive connections, constitute a powerful and versatile neuromorphic architecture that can function as classical Boolean logic circuits, associative memory, image processors, and combinatorial optimizers. In this paper, we discuss the basic philosophy behind adopting this architecture for nanoelectronic circuits and report on our experimental progress towards synthesizing this system.

Ethyl Tert-Butyl Ether And Methyl Tert-Butyl Ether: Status, Review, And Alternative Use Exploring The Environmental Issues Of Mobile, Recalcitrant, Hossein Noureddini

Papers in Biomaterials

Petroleum products leaking from under ground storage tanks have raised concerns regarding the quality of ground water resources, The concerns about the environmental behavior and rate of MTBE as an oxygenated additive prompted this iuvestigation to explore the technical characteristics of MTBE in comparison to ETBF. Evaluation of the existing literature suggests that ETBE has more favorable characteristics than MTBE. Findings in this research suggest that ETBE is a technically sound oxygenated octane enhancer, which can help refiners meet specificatios for cleaner burning gasoline.

Acuta Enews September 2002, Vol 31, No. 9

ACUTA Newsletters

In This Issue

One Year Later at BMCC

Meeting Demands of Tech-Savvy Students......................... Jeanne Jansenius, Univ. of the South

Tech Talk: An Emerging Acronym.................... Kevin Tanzillo, Dux Public Relations

10 Things that Could Influence Your IP-PBX Purchasing Decision Allan Sulking, TEQ Consult Group

Web Site of the Quater

DC Update..................... Whitney Johnson, Retired, Northern Michigan Univ.

Press Takes Note of Higher Ed Telecom Issues.................Jeri Semer, CAE, Executive Director

Board Report...................... John Bradley, Rensselaer Polytechnic Institute

Welcome New Members

Closed-Form Solution For A Mode-Iii Interfacial Edge Crack Between Two Bonded Dissimilar Elastic Strips, Xiangfa Wu, Yuris A. Dzenis

Department of Engineering Mechanics: Faculty Publications

A closed-form solution is obtained for the problem of a mode-III interfacial edge crack between two bonded semi-infinite dissimilar elastic strips. A general out-of-plane displacement potential for the crack interacting with a screw dislocation or a line force is constructed using conformal mapping technique and existing dislocation solutions. Based on this displacement potential, the stress intensity factor (SIF, K_III) and the energy release rate (ERR, G_III) for the interfacial edge crack are obtained explicitly. It is shown that, in the limiting special cases, the obtained results coincide with the results available in the literature. The present …

Closed-Form Solution For The Size Of Plastic Zone In An Edge-Cracked Strip, Xiang-Fa Wu, Yuris A. Dzenis

Department of Engineering Mechanics: Faculty Publications

This paper is concerned with the problem of plastic zone at the tip of an edge crack in an isotropic elastoplastic strip under anti-plane deformations. By means of complex potential and Dugdale model, the stress intensity factor and the size of plastic zone are obtained in closed-form. Furthermore, the analytic solutions for an edge crack at the free boundary of a half-space and a semi-infinite crack heading towards a free surface are determined as the limiting cases of the strip geometries.

In Situ Corrosion Studies On The Battleship Uss Arizona, John D. Makinson, James D. Carr, Matthew A. Russell, David L. Conlin, Larry E. Murphy

Department of Mechanical and Materials Engineering: Faculty Publications

U.S. National Park Service Submerged Resources Center archaeologists and University of Nebraska-Lincoln metallurgists are assessing hull corrosion by drilling through accumulated concretions and measuring pH and corrosion potentials. Concretion samples are being analyzed to determine the role of microbes in the corrosion process, identify chemical species, and measure electrical and physical properties. The lowest values of pH and E corr occur at the metal/concretion interface. Analysis suggests a variable corrosion rate supported by hydrogen discharge and/or oxygen reduction inside the concretion.

Residual Effects Of Compost And Fertilizer Applications On Nutrients In Runoff, John E. Gilley, Bahman Eghball

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The application of compost or fertilizer at rates that exceed crop nutrient requirements can result in phosphorus (P) and nitrogen (N) accumulation in soil. This study was conducted to determine the influence of soil P and N contents on the concentrations and total amounts of P and N transported in runoff. Composted beef cattle feedlot manure or inorganic fertilizer were added from 1992 to 1995 to a Sharpsburg silty clay loam soil at rates sufficient to meet P or N requirements for corn and incorporated following application. After four years of corn production following the last compost application, P concentration, …

Dielectric Properties Of A Ferroelectric Copolymer Langmuir–Blodgett Film, Mahantappa S. Jogad, Stephen Ducharme

Stephen Ducharme Publications

We report measurements of the real (epsilon prime) and imaginary (epsilon double-prime) parts of the relative complex permittivity of a Langmuir–Blodgett film of ferroelectric copolymer of vinylidene fluoride (70%) with trifluoroethylene (30%). The measurements were made in the temperature range of 35 to 125° C, and frequency range of 19 Hz to 5 MHz. The results indicate low frequency loss due to conduction and dielectric loss peak near the ferroelectric–paraelectric phase transition.

Field Guide To The Geology Of The Harlan County Lake Area, Harlan County, Nebraska, With A History Of Events Leading To Construction Of Harlan County Dam, Robert F. Diffendal Jr., Duane R. Mohlman, R. George Corner, F. Edwin Harvey, K. J. Warren, Scott Summerside, Roger K. Pabian, Duane A. Eversoll

School of Natural Resources: Faculty Publications

The year 2002 will mark the fiftieth anniversary of completion of the Harlan County Dam and Multi-Purpose Reservoir. This seems a good time to write about the history of and reasons for building the dam, the effects of the dam and reservoir on the Republican River valley, and the geologic features seen along the shores of the lake and areas nearby. As many junior authors helped produced this educational circular, they are listed in the table of contents. All other sections were written by the senior author.

Includes July 2016 update: Addendum of photographs showing fault traces on drought-exposed lake …

Acuta Enews August 2002, Vol 31, No. 8

ACUTA Newsletters

This This Issue

ACUTA Adopts New Logo........................... Megan Statom, ACUTA Communications Asst.

ACUTAs Strengths.............. Jeanne Jansenius, Univ. of the South

Culprits in the Performance Equation.............................. Gary Audin, Delphi, lnc.

Audio Seminar: "Economic Conditions in the Telecommunications industry"

DC Update Randal Hayes, Univ. of Northern lowa

Board Report..................................... John Bradley, Rensselaer Polytechnic institute

Winners, Winners, Winners!

Member Anniversaries..................... Jeri Semer, CAE, ACUTA Executive Director

Welcome New Members

Survey Of Hydrogen Sulfide Concentrations In Vicinity Of Beef Cattle Feedlots, Richard K. Koelsch, Bryan L. Woodbury, David E. Stenberg, Daniel N. Miller, Dennis D. Schulte

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

A field survey of Total Reduced Sulfur (TRS) concentrations in the vicinity of beef cattle feedlots was conducted to compare field observations against current regulatory thresholds. In addition, environmental factors that may contribute to increased TRS emissions were evaluated. It was observed that TRS levels in the vicinity of beef cattle feedlots are not likely to exceed current regulatory thresholds used by mid-western states. It was further noted that concentration of TRS varies with air temperature and time of day. However, wet feedlot surface conditions and wind speed had almost no impact upon observed concentrations.

Poly (1-Trimethysilyl-1-Propyne) Membrane Regeneration Process, Andrei G. Fadeev, Michael M. Meagher

Department of Chemical and Biomolecular Engineering: Faculty Publications

A novel process for the regeneration of PTMSP membranes is disclosed. The regeneration process includes washing a fouled PTMSP membrane with a solution containing at least about 50% butanol in water for a time sufficient to increase the flux and/or selectivity of the membrane. This regeneration process with a butanol containing solution significantly improves both the flux and selectivity of the PTMSP membrane and can regenerate the flux of the PTMSP membrane to the level of a previously unused membrane.