Engineering Commons^™

Coupled Dem-Fem For Dynamic Analysis Of Granular Systems In Bending, Kitti Rattanadit

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Characterizing the dynamic behavior of granular materials is one of the great challenges in the mechanics of granular matter. Methods for evaluating the mechanical properties of granular matter have applications in a variety of industries, mining and geotechnical activities, defense and military operations. A coupled 2D Discrete Element Method-Finite Element Method (DEM-FEM) code, called "BobKit", is developed and implemented for analyzing the behavior of a 2D granular layer on top of an elastic beam under deforming (quasi-static) or vibrating (dynamic) of the beam. The explicit time-integration dynamic code is used to simulate quasi-static and dynamic bending of the granular layer …

Affordable Lightweight High Performance Concrete (Alwhpc): Expanding The Envelope Of Concrete Mix Design, Kevin J. Simons

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

One way to reduce excess material would be to lighten the load on a structure with the use of affordable lightweight high performance concrete (ALWHPC). Most or all lightweight high performance concrete mixes used today include lightweight aggregates as the coarse aggregate and sand for the fine aggregate. ALWHPC mix designs contain all lightweight aggregates and cementitious materials that are readily available throughout the United States. Instead of 115 – 120 pcf, ALWHPC mix designs range from 88 – 100 pcf and strengths from 2,700 – 8,700 psi compressive strength. This research will explore the use of local lightweight aggregates …

Optimization And Economic Evaluation Of Industrial Gas Production And Combined Heat And Power Generation From Gasification Of Corn Stover And Distillers Grains, Ajay Kumar, Yaşar Demirel, David D. Jones, Milford Hanna

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Thermochemical gasification is one of the most promising technologies for converting biomass into power, fuels and chemicals. The objectives of this study were to maximize the net energy efficiency for biomass gasification, and to estimate the cost of producing industrial gas and combined heat and power (CHP) at a feedrate of 2,000 kg/h. Aspen Plusbased model for gasification was combined with a CHP generation model, and optimized using corn stover and dried distillers grains with solubles (DDGS) as the biomass feedstocks. The cold gas efficiencies for gas production were 57% and 52%, respectively, for corn stover and DDGS. The selling …

Time-Dependent Scour Depth Under Bridge-Submerged Flow, Yuan Zhai

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Failure of bridges due to local scour has motivated many investigators to explore the reasons of scouring and to give the prediction of the scour depth. But most scour prediction equations only address non-pressure-flow situations. Little research has been dedicated to another destructive scour, submerged-flow bridge scour (pressure flow scour) which can cause significant damages to bridges when partially or totally submerged during a large flood.

This thesis is specifically focused on the experimental study for time-dependent scour depth under bridge-submerged flow. The experiments were conducted in a self contained re-circulating tilting flume where two uniform sediment sizes and one …

Use Of Passive Samplers To Evaluate Pharmaceutical Fate In Surface Waters, Delshawn L. Brown

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Emerging contaminants have been of importance in recent water research. Wastewater treatment plants (WWTPs) have proved ineffective at handling present-day antibiotic loads from hospital and municipal sources. Kolpin et al. (2002) performed a study that identified pharmaceuticals in numerous waters downstream from effluent discharge. Though present in trace levels, concern has been raised regarding pharmaceutical persistence in natural environments. In the present study, uptake rates were quantified in the laboratory for 25 pharmaceutical compounds using Polar Organic Chemical Integrative Samplers (POCIS). Twenty new uptake rates were determined for compounds that have no previously reported literature values. POCIS was also used …

The Use Of Factor Analysis In The Development Of Hand Sizes For Glove Design, Trevor M. Mclain

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Factor analysis was used to develop a more detailed description of the human hand to be used in the creation of glove sizes; currently gloves sizes are small, medium, and large. The created glove sizes provide glove designers with the ability to create a glove design that can provide fit to the majority of hand variations in both the male and female populations. The research used the American National Survey (ANSUR) data that was collected in 1988. This data contains eighty-six length, width, height, and circumference measurements of the human hand for one thousand male subjects and thirteen hundred female …

Eutectic Solidification Limits And Mechanical Properties Of Sm–Co–Fe Alloys, Wendy Ann Wagner

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Creating a permanent magnet with a higher energy product than existing materials is attractive in order to optimize magnetic performance. The eutectic microstructure of Sm-Co alloys is attractive for magnets since primary rods of the Co-phase can act as a soft magnetic phase in the matrix of the Sm₂Co₁₇ hard magnetic phase, forming two-phase magnets. Fe replacement in Sm-Co alloys provides an opportunity to maintain the desirable eutectic microstructure of Co_1-xFe_x rods embedded in a Sm₂(Co_1-xFe_x)₁₇ matrix while improving the magnetization and lowering the cost. The purpose …

Adaptive Cutting Force Control For Process Stability Of Micro Ultrasonic Machining, Ala'a M. Al-Okaily

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The growing demand for miniaturized products motivates the advancement in micromanufacturing processes research and development. Micro Ultrasonic Machining (Micro USM) is a downscaled version of a macro USM process that is developed to fabricate complex features in chemically inert, nonconductive, hard, brittle materials such as quartz, glass, and ceramics. These materials have many applications in various fields such as optics, electronics, MEMS, and biotechnology. The micro USM process stability is hard to accomplish, because it is highly influenced by the accuracy of the machining system and the variation of the process control parameters. The repeatability of micro USM machined features …

Study Of Micro Rotary Ultrasonic Machining, Aarati Sarwade

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Product miniaturization for applications in fields such as biotechnology, medical devices, aerospace, optics and communications has made the advancement of micromachining techniques essential. Machining of hard and brittle materials such as ceramics, glass and silicon is a formidable task. Rotary ultrasonic machining (RUM) is capable of machining these materials. RUM is a hybrid machining process which combines the mechanism of material removal of conventional grinding and ultrasonic machining. Downscaling of RUM for micro scale machining is essential to generate miniature features or parts from hard and brittle materials.

The goal of this thesis is to conduct a feasibility study and …

Evaluation Method For Strategic Investments, Olabode Alabi

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Real Options Analysis (ROA) has become a complimentary tool for engineering economics. It has become popular due to the limitations of conventional engineering valuation methods; specifically, the assumptions of uncertainty. Industry is seeking to quantify the value of engineering investments with uncertainty. One problem with conventional tools are that they may assume that cash flows are certain, therefore minimizing the possibility of the uncertainty of future values. Real options analysis provides a solution to this problem, but has been used sparingly by practitioners. This paper seeks to provide a new model, referred to as the Beta Distribution Real Options Pricing …

A Concise Model Of 3x7 Wire Rope Used In Cable Guardrail Systems, Cody S. Stolle

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Wire rope is a versatile, flexible, high-strength member that is used in many mechanical systems. However, due to the complexity of wire rope, analytical investigations have been relatively limited. Previous attempts to create simplified models of wire rope were not validated with physical testing and used a cumbersome beam-and-shell or beam-and-solid method for simulating the wire rope. An improved LS-DYNA model of 19-mm diameter 3x7 wire rope commonly used in roadside cable guardrail installations has been developed. A Belytschko-Schwer beam element was selected along with material *MAT_166. Since wire rope displays internal damping due to friction of strands and wires, …

Newsletter 41 Issue 1 - Spring 2010 - Nuts And Bolts, Larsen Tractor Museum

Friends of the Larsen Tractor Museum

No abstract provided.

Maintenance Optimization For Substations With Aging Equipment, Haifeng Ge

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Today’s electric utilities are confronted with a myriad of challenges that include aging infrastructure, enhanced expectation of reliability, reduced cost, and coping effectively with uncertainties and changing regulation requirements. Utilities rely on Asset Management programs to manage inspections and maintenance activities in order to control equipment conditions. However, development of strategies to make sound decisions in order to effectively improve equipment and system reliability while meeting constraints such as a maintenance budget is a challenge.

The primary objective of this dissertation is to develop models and algorithms to study the impact of maintenance toward equipment/system reliability and economic cost, and …

Rapport: Semantic-Sensitive Namespace Management In Large-Scale File Systems, Yu Hua, Hong Jiang, Yifeng Zhu, Dan Feng

School of Computing: Technical Reports

Explosive growth in volume and complexity of data exacerbates the key challenge to effectively and efficiently manage data in a way that fundamentally improves the ease and efficacy of their use. Existing large-scale file systems rely on hierarchically structured namespace that leads to severe performance bottlenecks and renders it impossible to support real-time queries on multi-dimensional attributes. This paper proposes a novel semantic-sensitive scheme, called Rapport, to provide dynamic and adaptive namespace management and support complex queries. The basic idea is to build files’ namespace by utilizing their semantic correlation and exploiting dynamic evolution of attributes to support namespace management. …

Synthesis Of An Endothelial Cell Mimicking Surface Containing Thrombomodulin And Endothelial Protein C Receptor, Karl E. Kador

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Synthetic materials for use in blood contacting applications have been studied for many years with limited success. One of the main areas of need for these materials is the design of synthetic vascular grafts for use in the hundreds of thousands of patients who have coronary artery bypass grafting, many without suitable veins for autologous grafts. The design of these grafts is constrained by two common modes of failure, the formation of intimal hyperplasia (IH) and thrombosis. IH formation has been previously linked to a mismatching of the mechanical properties of the graft and has been overcome by creating grafts …

Channel Characterization For Wireless Underground Sensor Networks, Agnelo Rocha Da Silva

School of Computing: Dissertations, Theses, and Student Research

Wireless Underground Sensor Networks (WUSNs) are natural extensions of the established Wireless Sensor Network (WSN) phenomenon and consist of sensors buried underground which communicate through soil. WUSNs have the potential to impact a wide variety of applications including precision agriculture, environmental monitoring, border patrol, and infrastructure monitoring. The main difference between WUSNs and traditional wireless networks is the communication medium. However, a comprehensive wireless underground channel model for WUSNs has not been developed so far. In this thesis, the Soil Subsurface Wireless Communication (SSWC) channel model is developed based on an extensive empirical study in a large agriculture field. The …

Nebraska Blueprint- Spring 2010

Nebraska Blueprint (Student Publication)

Table of Contents:

4 From the Editor

5 The Baja, Formerly Known as Mini

6 ASCE Concrete Canoe and Steel Bridge

8 ASME Autonomous Material Sorter

10 AIAA: Design-Build-Fly

12 Human Powered Vehicle Rolls On

14 UNL Microgravity

Acuta Enews April 2010, Vol 39, No. 4

ACUTA Newsletters

ln This lssue

From the President.. ...,Harvey "Buck" Buchanan, Florida State Univ., ACUTA President

Board Report...........,.. George Denbow, Univ of Texas, ACUTA Secretary/Treasurer

Tech Talk Riding the Hype Cycle ...Kevin Tanzillo, Dux PR

Washington Update Newsletter

DC Update Dave Ostrom, Washington State Univ (retired)

Magnussen Named to Pandemic Planning Working Group

Congratulations to Sharon Stille and Mark Watters

Add Names from Your Campus to Your ACUTA Roster

Member Anniversaries

Multi-Event Discount: Attend More in 2010 and Save More!

Welcome New Members

Check lt Out: Press Releases...Job Postings...RFls/RFPs...Special Deals

Dc/Dc Converter For A Small Scale Wind Hydrogen System, Joel M. Jacobs

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

An electronic converter is designed for an isolated renewable energy system. In this system, energy produced by a small wind turbine is used to extract hydrogen from water. Unique aspects of this application that affect the performance of the converter will be defined. Design considerations of the individual components will be discussed. Calculations on performance and validation of those calculations are also presented. Lastly, an economic analysis of the produced hydrogen will be performed.

Computational And Experimental Characterization Of Bituminous Composites Based On Experimentally Determined Properties Of Constituents, Pravat Karki

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The stiffness of asphalt concrete mixtures is characterized in terms of the dynamic modulus for designing the thickness of flexible pavements. The dynamic modulus value of asphalt concrete is either determined experimentally or predicted by using empirical, semi-empirical, analytical or computational micromechanics models. This study proposes to use a computational micromechanics model to predict the dynamic modulus of asphalt concrete mixtures based on the experimentally determined properties of the constituents in the heterogeneous microstructure. The model defines asphalt concrete mixtures as the composites of two different homogeneous isotropic components – the viscoelastic fine aggregate matrix phase and the elastic aggregate …

Uncertainty In Indirect Land Use Change Emissions In The Life Cycle Of Biofuels: Implications For Legislation, Adam Liska

Adam Liska Papers

Current EPA life cycle analysis (LCA) of greenhouse gas (GHG) emissions from corn-ethanol will be the foundation for regulations for advanced biofuels. It appears regulatory policies that include emissions from indirect land use change (and other indirect emissions) in the biofuel life cycle are moving faster than the underlying science; there is no comparable scientific study that approaches the complexity in methods currently used by the EPA. There is substantial uncertainty in quantifying direct and indirect emissions from fuels, as evidenced by conflicting results from state and federal regulators and from within the scientific community. If indirect emissions from land …

Dsfs: Decentralized Security For Large Parallel File Systems, Zhongying Niu, Hong Jiang, Ke Zhou, Dan Feng, Tianming Yang, Dongliang Lei, Anli Chen

School of Computing: Technical Reports

This paper describes DSFS, a decentralized security system for large parallel file system. DSFS stores global access control lists (ACLs) in a centralized decisionmaking server and pushes pre-authorization lists (PALs) into storage devices. Thus DSFS allows users to flexibly set any access control policy for the global ACL or even change the global ACL system without having to upgrade the security code in their storage devices. With pre-authorization lists, DSFS enables a networkattached storage device to immediately authorize I/O, instead of demanding a client to acquire an authorization from a centralized authorization server at a crucial time. The client needs …

Service-Differentiated And Reliable Communication In Event-Based Wireless Sensor Networks, Yuyan Xue

School of Computing: Dissertations, Theses, and Student Research

Wireless Sensor Networks (WSNs) consist of low-power embedded devices with integrated sensing, computing and wireless communication capabilities. These devices, called sensor nodes or motes, are often battery-powered and deployed in a distributed manner to provide observations on the physical world. Reliably and promptly collecting the sensing data to convey the features of a surveillance area, especially the events of interest, to the sink is one of the most critical requirements of WSN design. However, dynamic wireless channel conditions and the constrained energy resources make it a challenging task to provide the end-to-end performance guarantees in multi-hop WSNs. The objective of …

Study Of Physical Layer Security In Wireless Communications, Mustafa Duruturk

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

This thesis has investigated security in wireless communications at physical layer. Security is an important issue for wireless communications and poses many challenges. Most security schemes have been applied to the upper layers of communications networks. Since in a typical wireless communication, transmission of data is over the air, third party receiver(s) may have easy access to the transmitted data. This work discusses a new security technique at the physical layer for the MIMO (802.11n) transmitters. For this project, the wireless medium is secured by transmitting a noise signal that is only recoverable by the receiver. This report includes an …

Acuta Enews March 2010, Vol 39, No. 3

ACUTA Newsletters

ln This lssue

Board of Directors for 2010-2011

From ACUTA Headquarters: Broadband Grants Announced..........Jeri A. Semer, CAE, Executive Dir.

Mark Watters, Ball State University, Wins ACUTA Conference Package

Message from ACUTA Young Professionals Subcommittee ......... Jana McDonald, Texas A&M University

Be a Moderator or Monitor at the Annual Conference

Mutli-Event Discount: Attend More in 2010 and Save More!

Tech Talk: Meeting the Challenge of Measuring UC's Benefits...... Kevin Tanzillo, Dux PR

Washington Update Newsletter

DC Update ..............Dave Ostrom, Washington State Univ. (retired)

Pennsylvania Coalition Awarded $99.6 Million NTIA Grant

ln Memory: Denny Grandowicz

lnfo links............. Randy Hayes, Univ. of Northern …

Pced2.0—A Computer Program For The Simulation Of Polycrystalline Electron Diffraction Pattern, Xingzhong Li

Nebraska Center for Materials and Nanoscience: Faculty Publications

A computer program for the simulation of polycrystalline electron diffraction patterns is described. PCED2.0, an upgraded version of the previous JECP/PCED, can be used as a teaching aid and research tool for phase identification, microstructure texture analysis, and phase fraction determination. In addition to kinematical theory for diffraction intensity calculation of polycrystalline samples, Blackman two-beam dynamical correction is included. March model is used for out-of-plane and in-plane texture simulation. A pseudo-Voigt function is used for the peak profile fitting of diffraction rings. User-friendly interface is improved in the handling of experimental diffraction data and the flexibility of indexing. Application of …

Controlling Nonviral Gene Delivery Through The Cell-Biomaterial Interface, Beth A. Duensing

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Controlling Nonviral Gene Delivery through the Cell-Biomaterial Interface
Beth Ann Duensing, M.S. University of Nebraska, 2010
Adviser: Angela Pannier

Cell-biomaterial interactions and the corresponding cellular behaviors are poorly understood. Therefore, in this study, the ability of biomaterial surface properties to control nonviral gene delivery was investigated through surface chemistry and protein adsorption and subsequently correlated to cellular behaviors controlled by cell-biomaterial interactions. Self-assembled monolayers (SAMs) of alkanethiols on gold were used as model biomaterials to investigate the effect of surface properties on nonviral gene transfer to cells adhered to these surfaces. SAMs presenting terminal CH₃, OH, COO^{- …}

Nutrient Transport In Runoff From Feedlots As Affected By Wet Distillers Grain Diet, John E. Gilley, Jason R. Vogel, Roger A. Eigenberg, David B. Marx, Brian L. Woodbury

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Distillers byproducts can serve as valuable sources of protein and energy for beef cattle. However, the water quality effects of the use of distillers byproducts in cattle rations are not well understood. The objectives of this study were to: (1) measure soil properties and nutrient transport in runoff from feedlot surfaces as affected by corn‐based and wet distillers grain diets, (2) compare the effects of unconsolidated surface materials and consolidated subsurface materials on feedlot soil characteristics and runoff nutrient transport, (3) determine if runoff nutrient transport from feedlot surfaces is correlated to selected feedlot soil properties, and (4) identify the …

Reducing The Cost Of Pumping Irrigation Water, Derrel L. Martin, William L. Kranz, Tom W. Dorn, Steve R. Melvin, Alan J. Corr

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

Irrigation accounts for a large portion of the energy used in Nebraska agriculture. The cost to pump irrigation water depends on the type of energy used to power the pumping unit. This document describes a method to estimate the cost of pumping water and to compare the amount of energy used to that for a well maintained and designed pumping plant. The results can help determine the feasibility of repairing the pumping plant.

Performance Of Self-Encoded Spread Spectrum Under Worst-Case Jamming, Casey L. Deyle

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

Performance of Self-Encoded Spread Spectrum Under Worst-Case Jamming Casey Deyle, M.S University of Nebraska 2009 Advisor: Lim Nguyen Spread Spectrum Communications uses m-sequences (sometimes referred to as Pseudo Noise or PN sequences) modulated with a data signal to create a transmission signal that takes up more bandwidth than the original information signal. Self-Encoded Spread Spectrum (SESS) uses spreading codes generated by the transmitted signal, eliminating the need to synchronize m-sequences between the transmitter and receiver, thus making the channel more secure. This paper will discuss the performance of SESS system in Additive White Gaussian Noise (AWGN) and Rayleigh fading channels, …