Engineering Commons^™

Nebraska Summary: S917 Massey Ferguson 6615, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S911 Massey Ferguson 7616, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2077: John Deere 6115m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2076: John Deere 6105m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2075: John Deere 5100e, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2074: John Deere 5085e, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2066: Versatile 375, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Safety Performance Evaluation Of The Non-Blocked Midwest Guardrail System, Kevin D Schrum, Karla A. Lechtenberg, Robert W. Bielenberg, Scott K. Rosenbaugh, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

No abstract provided.

Test 2054a: Case Ih Farmall 75c, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Binaural Room Impulse Response Database Acquired From A Variable Acoustics Classroom, Zhao Peng, Siu Kit Lau, Lily M. Wang, Sean Browne, Kenneth P. Roy

Durham School of Architectural Engineering and Construction: Faculty Publications

Room measurements were conducted in a variable acoustics classroom mockup space (epod) at Armstrong World Industries in Lancaster, Pennsylvania, USA. Binaural room impulse responses were measured in the epod using a head and torso simulator. Five reverberation time (RT) scenarios were achieved with various combinations of absorptive wall panels and acoustical ceiling tile. These provided a range of mid-frequency RTs from 0.4 to 1.1 seconds. Three of the five RT scenarios were achieved using two different material configurations to also consider material location effects. For each of the eight material configurations, two student-teacher orientations were tested. One orientation had all …

Effects Of Reverberation And Noise On Speech Comprehension By Native And Non-Native English-Speaking Listeners, Z. Ellen Peng, Lily M. Wang, Siu-Kit Lau, Adam M. Steinbach

Durham School of Architectural Engineering and Construction: Faculty Publications

Previous studies have demonstrated the negative impact of adverse signal-to-noise-ratios on non-native English-speaking listeners' performance on speech recognition using recall tasks, as well as implied that comprehension skills were more impaired than recognition skills under reverberation and noise. The authors have themselves previously conducted a pilot study on three native and three non-native Englishspeaking listeners to examine the effects of reverberation and noise using speech comprehension tasks. Those results suggested that speech comprehension performance is worse under longer reverberation times (RT), and that a longer RT is more detrimental to speech comprehension by non-native listeners than native listeners. This paper …

Acoustic Tweets And Blogs: Using Social Media In An Undergraduate Acoustics Course, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Each fall, the author teaches an undergraduate architectural acoustics course to around 40 third-year architectural engineering students at the University of Nebraska. Beginning in 2011, a social media component was introduced to explore the use of this technology and how it may supplement the students' learning experience. Students were given an opportunity to receive extra credit by using Twitter and/or blogging about course material using a set hashtag (#AE3300) or through the course website. Results were positive, and the author will discuss pros and cons that she has experienced in adding this social media component. Suggestions for future implementations and …

Qualitative And Quantitative Analysis Of Lignocellulosic Biomass Using Infrared Techniques: A Mini-Review, Feng Xu, Jianming Yu, Tesfaye Tesso, Floyd Dowell, Donghai Wang

United States Department of Agriculture-Agricultural Research Service / University of Nebraska-Lincoln: Faculty Publications

Current wet chemical methods for biomass composition analysis using two-step sulfuric acid hydrolysis are time-consuming, labor-intensive, and unable to provide structural information about biomass. Infrared techniques provide fast, low-cost analysis, are non-destructive, and have shown promising results. Chemometric analysis has allowed researchers to perform qualitative and quantitative study of biomass with both near-infrared and mid-infrared spectroscopy. This review summarizes the progress and applications of infrared techniques in biomass study, and compares the infrared and the wet chemical methods for composition analysis. In addition to reviewing recent studies of biomass structure and composition, we also discuss the progress and prospects for …

Bacillus Thuringiensis: Transgenic Crops, Julie A. Peterson, John J. Obrycki, James D. Harwood

Department of Entomology: Faculty Publications

Bacillus thuringiensis (Bt) crops, genetically modified to express insecticidal toxins that target key pests of corn, cotton, rice, potato, and other crops, have been rapidly adopted and have become dominant fixtures in agroecosystems throughout the world. Due to the constitutive nature of Bt toxin expression, insecticidal proteins may be found in nearly all plant tissues, presenting multiple sources for Bt toxins to enter the environment, thus creating complex direct and indirect pathways for non-target organisms to be exposed to insecticidal proteins. The environmental impacts of Bt crops have been widely debated, although both benefits and risks do exist. Benefits of …

Human Performance Regression Testing, Amanda Swearngin, Myra B. Cohen, Bonnie E. John, Rachel K. E. Bellamy

School of Computing: Conference and Workshop Papers

As software systems evolve, new interface features such as keyboard shortcuts and toolbars are introduced. While it is common to regression test the new features for functional correctness, there has been less focus on systematic regression testing for usability, due to the effort and time involved in human studies. Cognitive modeling tools such as CogTool provide some help by computing predictions of user performance, but they still require manual effort to describe the user interface and tasks, limiting regression testing efforts. In recent work, we developed CogTool-Helper to reduce the effort required to generate human performance models of existing systems. …

Fea Estimation And Experimental Validation Of Solid Rotor And Magnet Eddy Current Loss In Single-Sided Axial Flux Permanent Magnet Machines, Xu Yang, Dean Patterson, Jerry Hudgins, Jessica Colton

Department of Electrical and Computer Engineering: Faculty Publications

The rotor and magnet loss in single-sided axial flux permanent magnet machines with non-overlapped windings is studied in this paper. FEA estimations of the loss are carried out using both 2-D and 3-D modeling. The rotor and magnet losses are determined separately for stator slot passing and MMF space harmonics from currents in the stator. The segregation of loss between the solid rotor plate and the magnet is addressed. The eddy current loss reduction by magnet segments is discussed as well. The prototype 24 slot/22 pole single-sided AFPMs, fabricated with both single layer and double layer windings are assembled. Methods …

Multi-Objective Design Optimization Of A Single-Sided Axial Flux Permanent Magnet Machine, Xu Yang, Dean Patterson, Jerry Hudgins

Department of Electrical and Computer Engineering: Faculty Publications

This paper presents an optimal design approach for a single-sided axial flux permanent magnet (AFPM) machine. A multi-objective differential evolution based optimization algorithm is implemented, which is to maximize the output torque density (Nm/kg) and efficiency. Design constraints including geometrical and operating limits are considered. Total of seven independent variables are employed in the design. Optimization results are compared with a prototype design.

Trading Wind Power In A Competitive Electricity Market Using Stochastic Programing And Game Theory, Ting Dai, Wei Qiao

Department of Electrical and Computer Engineering: Faculty Publications

Wind power is one of the most rapidly growing clean and renewable energy sources. However, due to the uncertainty and intermittency of wind power, the increasing penetration of wind power into the electric power system will pose challenges to power system operators. Moreover, as a participant in a competitive electricity market, a wind power producer’s behavior and profit will be influenced by other participants’ behaviors. This paper proposes a model of using stochastic programming to generate optimal bidding strategies to maximize the total profits of wind and conventional power producers in both the energy market and a bilateral reserve market, …

Application-Aware Routing For Multi-Hop Cognitive Radio Networks With Channel Bonding, Feng Ye, Jiazhen Zhou, Rose Qingyang Hu

Department of Electrical and Computer Engineering: Faculty Publications

Due to the unequal spectrum resources in different areas, multi-hop wireless cognitive radio network (MWCRN) faces the challenge of a relatively poor performance. In this paper, we propose an application-aware routing scheme with channel bonding technique to help improve the efficiency and performance of a MWCRN network. More specifically, we formulate an optimization problem aiming to meet the application request, as well as operating at low transmission cost. To solve this problem, we first study the greatest lower bound of transmission cost named as Utopian cost, as well as an upper bound of transmission cost. Moreover, we propose two distributed …

Imbalance Fault Detection Of Direct-Drive Wind Turbines Using Generator Current Signals, Xiang Gong, Wei Qiao

Department of Electrical and Computer Engineering: Faculty Publications

No abstract provided.

Short-Term Wind Power Prediction Using A Wavelet Support Vector Machine, Jianwu Zeng, Wei Qiao

Department of Electrical and Computer Engineering: Faculty Publications

No abstract provided.

Reliability-Driven Optimum Standby Electric Storage Allocation For Power Distribution Systems, Salman Kahrobaee, Sohrab Asgarpoor

Department of Electrical and Computer Engineering: Faculty Publications

Integration of distributed energy resources (DER) has become an indispensable aspect of the future smart grid. The significant and valuable impact of these resources is expected to lead toward a more reliable and efficient power system. As the number of distributed generation and storage systems increases, the availability of sensitive and critical loads may be improved by allocating a portion of electricity storage capacity as a reserve. The goal of this paper is to determine the optimum standby storage capacity in a smart grid based on reliability indices such as the Expected Interruption Cost (EIC) of the system using particle …

The Effect Of Demand Side Management On Reliability Of Automated Distribution Systems, Salman Kahrobaee, Sohrab Asgarpoor

Department of Electrical and Computer Engineering: Faculty Publications

Demand side management (DSM) provides power systems with the opportunity to supply electricity to the customers more efficiently and reliably. In a smart grid incorporating automated control and distributed energy systems, an effective DSM can alleviate the peak load and shift part of the demand to off-peak hours. This paper evaluates the impact of DSM on reliability of automated power distribution systems. Unlike the previous research studies, we perform load flow analysis and state enumeration to include actual restrictions of distribution systems such as voltage limits of buses and power flow limits of branches. The effects of demand curve and …

Real-Time Temporal Stereo Matching Using Iterative Adaptive Support Weights, Jedrzej Kowalczuk, Eric T. Psota, Lance C. Pérez

Department of Electrical and Computer Engineering: Faculty Publications

Stereo matching algorithms are nearly always designed to find matches between a single pair of images. A method is presented that was specifically designed to operate on sequences of images. This method considers the cost of matching image points in both the spatial and temporal domain. To maintain real-time operation, a temporal cost aggregation method is used to evaluate the likelihood of matches that is invariant with respect to the number of prior images being considered. This method has been implemented on massively parallel GPU hardware, and the implementation ranks as one of the fastest and most accurate real-time stereo …

A Survey Of Energy-Efficient Compression And Communication Techniques For Multimedia In Resource Constrained Systems, Tao Ma, Michael Hempel, Dongming Peng, Hamid Sharif

Department of Electrical and Computer Engineering: Faculty Publications

Advances in wireless multimedia communication technologies enable new types of pervasive and ubiquitous applications such as mobile health care, environmental monitoring, facility monitoring and traffic surveillance. Among different factors concerned, energy efficiency is one of the most challenging issues in multimedia communication due to the resource constraints, and the requirements for high bandwidth and low transmission delay. In this survey, we provide a broad picture of the state of- the-art energy efficient techniques that have been proposed in wireless multimedia communication for resource-constrained systems such as wireless sensor networks and mobile devices.

Following the essential stages required for multimedia communication, …

Design Considerations Of Switched Reluctance Motors With Bipolar Excitation For Low Torque Ripple Applications, Cong Ma, Liyan Qu

Department of Electrical and Computer Engineering: Faculty Publications

Switched reluctance motors (SRMs) have been applied to many applications over the past decades due to their simple structure, low cost, and robustness. The primary disadvantage of SRMs is the relatively high torque ripple. In this paper, the machine design is considered under a two-mode bipolar excitation to achieve the optimum performance of a mutually coupled switched reluctance motor (MCSRM) for low torque ripple applications. Geometrical design equations and practical challenges are investigated. In addition, a six-slot, tenpole (6/10) SRM with a six-phase winding configuration under the two-mode bipolar excitation is optimized by solving a multiobjective optimization problem using a …

Improved Microcontroller-Based Electronic Respiratory Training, Steven A. Parkison, Jay D. Carlson, Lance C. Pérez

Department of Electrical and Computer Engineering: Faculty Publications

Respiratory training is a critical component of many rehabilitation plans, including those of stroke patients. Many current respiratory training techniques lack efficient methods for quantifying progress and updating testing parameters. A previously-developed microcontroller-based device, designed in conjunction with clinicians at the Institute for Rehabilitation Science and Engineering at Madonna Rehabilitation Hospital, has demonstrated promising results. Here, a prototype of a revised device that is network connected and remoatly sends trial information is presented.\ The proposed device demonstrates enhanced functionality, while being smaller and using less power than the original prototype.

Effective Capacity Of Two-Hop Wireless Communication Systems, Deli Qiao, Mustafa Cenk Gursoy, Senem Velipasalar

Department of Electrical and Computer Engineering: Faculty Publications

A two-hop wireless communication link in which a source sends data to a destination with the aid of an intermediate relay node is studied. It is assumed that there is no direct link between the source and the destination, and the relay forwards the information to the destination by employing the decode-and-forward scheme. Both the source and intermediate relay nodes are assumed to operate under statistical quality of service (QoS) constraints imposed as limitations on the buffer overflow probabilities. The maximum constant arrival rates that can be supported by this two-hop link in the presence of QoS constraints are characterized …

Online Soc And Soh Estimation For Multicell Lithium-Ion Batteries Based On An Adaptive Hybrid Battery Model And Sliding-Mode Observer, Taesic Kim, Wei Qiao, Liyan Qu

Department of Electrical and Computer Engineering: Faculty Publications

This paper proposes an adaptive hybrid battery model-based high-fidelity state of charge (SOC) and state of health (SOH) estimation method for rechargeable multicell batteries. The hybrid battery model consists of an enhanced Coulomb counting algorithm for SOC estimation and an electrical circuit battery model. A variable-length sliding window least squares (VSWLS)-based online parameter identification algorithm is designed to estimate the electrical parameters of the electrical battery model, which are then used as the parameters of an adaptive discrete-time sliding-mode observer (ADSMO) for terminal and open-circuit voltage estimation of a battery cell. The error of the SOC estimated from the enhanced …

A Survey On Smart Grid Communication Infrastructures: Motivations, Requirements And Challenges, Ye Yan, Yi Qian, Hamid Sharif, David Tipper

Department of Electrical and Computer Engineering: Faculty Publications

A communication infrastructure is an essential part to the success of the emerging smart grid. A scalable and pervasive communication infrastructure is crucial in both construction and operation of a smart grid. In this paper, we present the background and motivation of communication infrastructures in smart grid systems. We also summarize major requirements that smart grid communications must meet. From the experience of several industrial trials on smart grid with communication infrastructures, we expect that the traditional carbon fuel based power plants can cooperate with emerging distributed renewable energy such as wind, solar, etc, to reduce the carbon fuel consumption …