Engineering Commons^™

Implementation Of Precast Concrete Deck System Nudeck (2nd Generation), George Morcous, Maher K. Tadros

Nebraska Department of Transportation: Research Reports

No abstract provided.

Development And Evaluation If Best Management Practices For Highway Runoff Pollution Control, Tian C. Zhang, John S. Stansbury, Massom Moussavi

Nebraska Department of Transportation: Research Reports

No abstract provided.

A Simple Method For Estimation Of Queue Length, S. P. Anusha, Lelitha Devi Vanajakshi, Anuj Sharma

Department of Civil and Environmental Engineering: Faculty Publications

Urban arterials are characterized by frequent intersections. Queue length and delay are the two primary measures of performance of intersection. These measures play a primary role in determining the arterial performance. This article presents a methodology to determine the number of vehicles in queue at a signalized intersection for under saturated traffic conditions. The results obtained were validated using actual values that are manually extracted. The root-mean-square error is of the range 1.3 vehicles for estimation of number of vehicles in queue. The various aspects that have to be considered in accurate estimation of performance measures are also discussed.

Elementary Implantable Force Sensor For Smart Orthopaedic Implants, Rebecca A. Wachs, David Ellstein, John Drazan, Colleen P. Healey, Richard L. Uhl, Kenneth A. Connor, Eric H. Ledet

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Implementing implantable sensors which are robust enough to maintain long term functionality inside the body remains a significant challenge. The ideal implantable sensing system is one which is simple and robust; free from batteries, telemetry, and complex electronics. We have developed an elementary implantable sensor for orthopaedic smart implants. The sensor requires no telemetry and no batteries to communicate wirelessly. It has no on-board signal conditioning electronics. The sensor itself has no electrical connections and thus does not require a hermetic package. The sensor is an elementary L-C resonator which can function as a simple force transducer by using a …

Clustering And Classification Of Multi-Domain Proteins, Neethu Shah

School of Computing: Dissertations, Theses, and Student Research

Rapid development of next-generation sequencing technology has led to an unprecedented growth in protein sequence data repositories over the last decade. Majority of these proteins lack structural and functional characterization. This necessitates design and development of fast, efficient, and sensitive computational tools and algorithms that can classify these proteins into functionally coherent groups.

Domains are fundamental units of protein structure and function. Multi-domain proteins are extremely complex as opposed to proteins that have single or no domains. They exhibit network-like complex evolutionary events such as domain shuffling, domain loss, and domain gain. These events therefore, cannot be represented in the …

Development Of A Field Test For Total Suspended Solids Analysis, Jessica Branigan

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Total suspended solids (TSS) are all particles in water that will not pass through a glass fiber filter with a pore size less than 2 μm, including sediments, algae, nutrients, and metals. TSS is an important water quality parameter because of its adverse effects on aquatic species and wildlife. The EPA has proposed a regulation for turbidity, a related water quality parameter, which has been stayed pending further testing. TSS is regulated through the EPA via the NPDES in many states. Since there are no accepted field tests for TSS, projects with TSS regulations must send samples to a laboratory …

The Effect Of Skew Angle On Average Queue Delay At Tee-Intersections: A Simulation Study Using The Texas Model, Manogna Kaluva

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

This thesis explores the effect of intersection skew angle on average queue delay through simulation. The simulation model used is the TEXAS (Traffic Experimental and Analytical Simulation) model. This microscopic simulation model uses a general nonlinear car-following model. It simulates individual intersections and was designed to capture the interaction of traffic operations and intersection geometry.

Simulation models were developed for three stop-controlled, tee-intersections in Lincoln, Nebraska. Field data to develop and calibrate the simulation models were collected. All simulation models were calibrated by adjusting the car following parameters. An experimental design was developed to test the effect of skew angle …

Ultrasonic Propagation And Scattering In Pearlitic Steel, Hualong Du

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Diffuse ultrasonic backscatter measurements have been especially useful for extracting microstructural information and for improving flaw detection in materials. In this dissertation, this approach is applied to inspection of railroad wheels. To improve the wear resistance, the tread surfaces of railroad wheels are usually quenched with water to increase the hardness. The pearlite phase of iron, characterized by alternating ferrite and cementite phases, is created by the quenching and the lamellar spacing within grains increases progressively from the quenched tread surface to deeper locations due to the non-uniform cooling rate. The quench depth is an important parameter governing the wheel …

Near-Infrared Surface-Enhanced Fluorescence Using Silver Nanoparticles In Solution, Michael D. Furtaw

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Fluorescence spectroscopy is a widely used detection technology in many research and clinical assays. Further improvement to assay sensitivity may enable earlier diagnosis of disease, novel biomarker discovery, and ultimately, improved outcomes of clinical care along with reduction in costs. Near-infrared, surface-enhanced fluorescence (NIR-SEF) is a promising approach to improve assay sensitivity via simultaneous increase in signal with a reduction in background. This dissertation describes research conducted with the overall goal to determine the extent to which fluorescence in solution may be enhanced by altering specific variables involved in the formation of plasmonactive nanostructures of dye-labeled protein and silver nanoparticles …

Structural And Magnetic Characterization Study Of Hfco7 Alloy With Substitutions Of Si, Ti, Fe, Mn And B, Jacob A. Lewis

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Magnetic materials are a critical component of the modern technological society. The market of high-energy product hard magnets is dominated by the rare-earth element containing neodymium-iron-boron (NdFeB) magnets. As a result of worldwide demand coupled with trade restrictions on rare-earth minerals, new magnet compositions are explored to reduce pressure on the already strained market. The hafnium-cobalt alloy system has shown promise as a candidate for filling the gap in saturation magnetization between rare-earth containing alloys and those made with abundant elements. This study explores the magnetic effects of silicon, titanium, iron, manganese and boron substitutions in the hafnium-cobalt-7 (1:7 atomic …

Experimental Study On The Effect Of Air Flow On Soap Bubble Formation, John M. Davidson

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Soap bubbles are a common interfacial fluid dynamics phenomenon having applications such as buoyant hollow spherical fillers and flow visualization of large scale airflows. In contrast to the dynamics of liquid drops in gas and gas bubbles in liquid, the dynamics of soap bubbles has not been well documented, possibly because soap bubbles have gas-liquid-gas interfaces. Having the thin-liquid-film interface seems to alter the characteristics of the bubble/drop creation process. Thus, the main objective of this study is to experimentally examine how airflow develops and interacts with the soap liquid film as the film stretches and finally collapses to pinch-off. …

Ergonomichandle And Articulating Laparoscopictool, M. Susan Hallbeck, Dmitry Oleynikov, Kathryn Done, Tim Judkins, Allison Dimartino, Jonathan Morse, Lawton N. Verner

Department of Mechanical and Materials Engineering: Faculty Publications

The present invention relates to a laparoscopic apparatus. The apparatus includes a handle having a body portion, a top surface, opposite bottom surface, a proximal and distal end. The top surface of the base is contoured to compliment the natural curve of the palm. The apparatus further includes a shaft projecting from the distal end of the handle. The shaft has a proximal and distal end. A control sphere is located on the handle. The control sphere can be moved by one or more of a user's fingers to indicate direction. An end effector is located at the distal end …

Acuta Enews November 2013 Vol. 42, No. 11

ACUTA Newsletters

In this Issue...

1 The Concept of Context-Aware Computing

2 Nominate Now for Ruth A. Michalecki Leadership Award

3 Collaboration Is Not Automatic

4 Nominations for Board of Directors: Deadline November 18

5 Free Webinar: The Evolution of Control Systems Security Brief

5 What's on Your Desk?

6 Bring 8 Fall Seminar Sessions to Your Desktop or Tablet

6 Thanks to Fall Seminar Exhibitors 6 Sponsors

6 Get Your Logos Here

7 Info Links

8 Add Names from Your Campus to Your ' ACUTA Roster

8 Board Report

9 Welcome New Members

9 Check It Out

Nuts & Bolts, Volume 1, Issue 4

Friends of the Larsen Tractor Museum

Splinter Gallery Construction

Restoration Club

Museum OLLI Program

Free Webinar: Ethanol in Legacy Engines

Scalar Differential Equation For Slowly-Varying Thickness-Shear Modes In At-Cut Quartz Resonators With Surface Impedance For Acoustic Wave Sensor Application, Huijing He, Jiashi Yang, John A. Kosinski

Department of Mechanical and Materials Engineering: Faculty Publications

For time-harmonic motions, we generalize a 2-D scalar differential equation derived previously by Tiersten for slowly-varying thickness-shear vibrations of AT-cut quartz resonators. The purpose of the generalization is to include the effects of surface acoustic impedance from, e.g., mass layers or fluids for sensor applications. In addition to the variation of fields along the plate thickness, which is considered in the usual 1-D acoustic wave sensor models, the equation obtained also describes in-plane variations of the fields, and therefore can be used to study the vibrations of finite plate sensors with edge effects. The equation is compared with the theory …

Improving The Sweeping Efficiency Of Permanganate Into Low Permeable Zones To Treat Tce: Experimental Results And Model Development, Chanat Chokejaroenrat, Negin Kananizadeh, Chainarong Sakulthaew, Steve D. Comfort, Yusong Li

Nebraska Water Center: Faculty Publications

The residual buildup and treatment of dissolved contaminants in low permeable zones (LPZs) is a particularly challenging issue for injection-based remedial treatments. Our objective was to improve the sweeping efficiency of permanganate into LPZs to treat dissolved-phase TCE. This was accomplished by conducting transport experiments that quantified the ability of xanthan-MnO₄⁻ solutions to penetrate and cover (i.e., sweep) an LPZ that was surrounded by transmissive sands. By incorporating the non-Newtonian fluid xanthan with MnO₄⁻, penetration of MnO₄⁻ into the LPZ improved dramatically and sweeping efficiency reached 100% in fewer pore volumes. To quantify …

Acuta Enews October 2013 Vol. 42, No. 10

ACUTA Newsletters

In this Issue...

1 Nominate for Board of Directors

1 PD and More from ACUTA

2 Nominations Open for institutional Excellence Award

3 What's on Your Desk?

4 Using Social Media During Times of Crisis

5 Why You Should Customize Lync' qualified Phones

6 Board Report

7 Info Links

8 Welcome New Members

8 Check It Out

Department Of Biological Systems Engineering Newsletter, October 2013

BSE Department Magazine

No abstract provided.

Yield And Crop Water Use Efficiency Response Of Drought-Tolerant And Conventional Maize Hybrids Under Different Irrigation Regimes, Plant Populations And Climate Gradients, Ali T. Mohammed

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Water scarcity in many regions of the world, including Nebraska, is imposing increasing pressure on water demands in agriculture to meet future food and fiber demand of rapidly growing world populations. One of the viable alternatives to counter this challenge is cultivating new drought-tolerant hybrids/varieties/cultivars. Recently, new drought-tolerant maize (Zea mays L.) hybrids have been developed by major seed companies. However, it is essential to evaluate the performance of these hybrids, in terms of grain yield and crop water use (actual evapotranspiration) in various climatic and soil conditions under large production settings. Research was conducted at four locations across the …

Implementation Of 0.7 In. Diameter Strands In Prestressed Concrete Girders, George Morcous

Nebraska Department of Transportation: Research Reports

No abstract provided.

A New Angle On Microscopic Suspension Feeders Near Boundaries, Rachel E. Pepper, Marcus Roper, Sangjin Ryu, Nobuyoshi Matsumoto, Moeto Nagai, Howard A. Stone

Department of Mechanical and Materials Engineering: Faculty Publications

Microscopic sessile suspension feeders are a critical component in aquatic ecosystems, acting as an intermediate trophic stage between bacteria and higher eukaryotic taxa. Because they live attached to boundaries, it has long been thought that recirculation of the feeding currents produced by sessile suspension feeders inhibits their ability to access fresh fluid. However, previous models for the feeding flows of these organisms assume that they feed by pushing fluid perpendicular to surfaces they live upon, whereas we observe that sessile suspension feeders often feed at an angle to these boundaries. Using experiments and calculations, we show that living suspension feeders …

Isolation Of High Quality Graphene From Ru By Solution Phase Intercalation, E. Koren, Eli A. Sutter, S. Bliznakov, F. Ivars-Barcelo, P. Sutter

Department of Electrical and Computer Engineering: Faculty Publications

2013 AIP Publishing LLC

Acuta Enews September 2013 Vol. 42, No. 9

ACUTA Newsletters

In this Issue...

1 Big Data Means Big Advances

2 Nominations Open for 2014 institutional Excellence Award

2 Seeking Presenters for Winter Seminar

3 Webinar: The Evolution of Control Systems Security Brief

3 Register to Attend Fall Seminar

4 What Exactly Is a Microsoft Lync Phone?

6 Info Links

7 Overheard on the Listserv

8 Board Report

9 Welcome New Members

9 Check It Out

The Mayaarch3d Project: A 3d Webgis For Analyzing Ancient Architecture And Landscapes, Jennifer Von Schwerin, Heather Richards-Rissetto, Fabio Remondino, Giorgio Agugario, Gabrio Girardi

Department of Anthropology: Faculty Publications

There is a need in the humanities for a 3D WebGIS with analytical tools that allow researchers to analyze 3D models linked to spatially referenced data. Geographic Information Systems (GIS) allow for complex spatial analysis of 2.5D data. For example, they offer bird’s eye views of landscapes with extruded building footprints, but one cannot ‘get on the ground’ and interact with true 3D models from a pedestrian perspective. Meanwhile, 3D models and virtual environments visualize data in 3D space, but analytical tools are simple rotation or lighting effects. The MayaArch3D Project is developing a 3D WebGIS—called QueryArch3D—to allow these two …

Midwest Guardrail System With Southern Yellow Pine Posts, Karla A. Lechtenberg, Robert W. Bielenberg, Ronald K. Faller, Dean L. Sicking, David A. Gutierez, John D. Reid

Nebraska Department of Transportation: Research Reports

No abstract provided.

Establishing Permanent Vegetation After Highway Construction, John C. Soper, Walter H. Schacht

Nebraska Department of Transportation: Research Reports

No abstract provided.

The Role Of Mechanically Induced Erk Phosphorylation In Stem Cell Adipogenesis, Daniel E. Menter

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Mechanical cell stimulation has only recently been highlighted for its ability to direct cell function and fate. The development of techniques to apply controlled mechanical stimulation to cells has allowed researchers to examine the effects of forces on cell behavior. These studies have shown that cells, and in particular, stem cells are very sensitive to mechanical stimuli. While the potential impact of mechanical forces has been demonstrated by these studies, there have not been many studies that compare the differing effects of stimulation profiles and methods. Further, molecular mechanosensing mechanisms have not been identified. In this work, we compared the …

Flow-Induced Crystallization Of Isotactic Polypropylene And Random Polyethylene–Polypropylene Copolymers, Frederic Aubin

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Flow-induced crystallization (FIC) has been investigated for decades but the effect of molecular characteristics that hinder crystallization—such as the presence of random comonomers— on FIC remains scarcely explored. Flow greatly enhances crystallization kinetics and can induce the formation of highly oriented morphologies that affect final properties (i.e. stiffness, permeability, thermal conductivity, elastic modulus, etc.). Therefore, understanding FIC remains particularly important for developing predictive models to allow optimization of processing techniques involving flows.

Polypropylene represents ~ 40% of the global polyolefin production. The addition of ethylene comonomer allows their use as engineering plastics because of their particular toughness and flexibility. This …

The Mechanics Of Intracranial Loading During Blast And Blunt Impacts: Experimental And Numerical Studies, Veera Selvan Kuppuswamy

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Head injuries in an explosion occur as a result of a sudden pressure changes (e.g. shock-blast) in the atmosphere (primary injury), high velocity impacts of debris (secondary injury) and people being thrown against the solid objects (tertiary injury) in the field. In this thesis, experimental and numerical approaches are used to delineate the intracranial loading mechanics of both primary (blast) and tertiary injuries (blunt).

The blast induced head injuries are simulated using a fluid-filled cylinder. This simplified model represents the head-brain complex and the model is subjected to a blast with the Friedlander waveform type of loading. We measured the …

Propagation Of Thermo-Mechanical Waves In Deforming Nonlinear Viscoelastic Bodies, Lili Zhang

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

This work studies the propagation of thermo-mechanical disturbances in bodies made of viscoelastic materials that might already be loaded such that they are undergoing large inhomogeneous time varying deformations. In the process of this study we develop the general equations governing the thermo-mechanical motion of such disturbances and ones for internally constrained systems, provide the general structure of the solution, match the solution to existing results for the special case of time harmonic plane waves in elastic bodies and in viscoelastic bodies under constant homogenous loading, and consider some special applications.

The results of this work should have applications in …