Engineering Commons^™

Multiscale Modeling Of Skeletal Muscle Active Contraction In Relation To Mechanochemical Coupling Of Molecular Motors, Jiangcheng Chen, Xiaodong Zhang, Shengmao Lin, He Wang, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

In this work, a mathematical model was developed to relate the mechanochemical characterizations of molecular motors with the macroscopic manifestation of muscle contraction. Non-equilibrium statistical mechanics were used to study the collective behavior of myosin molecular motors in terms of the complex conformation change and multiple chemical states in one working cycle. The stochastic evolution of molecular motor probability density distribution during the contraction of sarcomere was characterized by the Fokker-Planck Equation. Quick muscle contraction was demonstrated by the collective dynamic behavior of myosin motors, the muscle contraction force, and the muscle contraction velocity-force relation. Our results are validated against …

Inducing Persistent Flow Disturbances Accelerates Atherogenesis And Promotes Thin Cap Fibroatheroma Development In D374y-Pcsk9 Hypercholesterolemic Minipigs, Ryan M. Pedrigi, Christian Bo Poulsen, Vikram V. Mehta, Niels Ramsing Holm, Nilesh Pareek, Anouk L. Post, Ismail Dogu Kilic, Winston A.S. Banya, Gianni Dall'ara, Alessio Mattesini, Martin M. Bjorklund, Niels P. Andersen, Anna K. Grondal, Enrico Petretto, Nicolas Foin, Justin E. Davies, Carlo Di Mario, Jacob Fog Bentzon, Hans Erik Botker, Erling Falk, Rob Krams, Ranil De Silva

Department of Mechanical and Materials Engineering: Faculty Publications

Background—Although disturbed flow is thought to play a central role in the development of advanced coronary atherosclerotic plaques, no causal relationship has been established. We evaluated whether inducing disturbed flow would cause the development of advanced coronary plaques, including thin cap fibroatheroma (TCFA).

Methods and Results—D374Y-PCSK9 hypercholesterolemic minipigs (N=5) were instrumented with an intracoronary shear-modifying stent (SMS). Frequency-domain optical coherence tomography was obtained at baseline, immediately post-stent, 19, and 34 weeks and used to compute shear stress metrics of disturbed flow. At 34 weeks, plaque type was assessed within serially-collected histological sections and co-registered to …

Self‑Propelled Droplets On Heated Surfaces With Angled Self‑Assembled Micro/Nanostructures, Cory Kruse, Isra Somanas, Troy Anderson, Chris Wilson, Craig Zuhlke, Dennis Alexander, George Gogos, Sidy Ndao

Department of Mechanical and Materials Engineering: Faculty Publications

Directional and ratchet-like functionalized surfaces can induce liquid transport without the use of an external force. In this paper, we investigate the motion of liquid droplets near the Leidenfrost temperature on functionalized self-assembled asymmetric microstructured surfaces. The surfaces, which have angled microstructures, display unidirectional properties. The surfaces are fabricated on stainless steel through the use of a femtosecond laser-assisted process. Through this process, mound-like microstructures are formed through a combination of material ablation, fluid flow, and material redeposition. In order to achieve the asymmetry of the microstructures, the femtosecond laser is directed at an angle with respect to the sample …

Quantification Of Ultraprecision Surface Morphology Using An Algebraic Graph Theoretic Approach, Prahalad Rao, Satish T. S. Bukkapatnam, Zhenyu (James) Kong, Omer F. Beyca, Kenneth Case, Ranga Komanduri

Department of Mechanical and Materials Engineering: Faculty Publications

Assessment of progressive, nano-scale variation of surface morphology during ultraprecision manufacturing processes, such as fine-abrasive polishing of semiconductor wafers, is a challenging proposition owing to limitations with traditional surface quantifiers. We present an algebraic graph theoretic approach that uses graph topological invariants for quantification of ultraprecision surface morphology. The graph theoretic approach captures heterogeneous multi-scaled aspects of surface morphology from optical micrographs, and is therefore valuable for in situ real-time assessment of surface quality. Extensive experimental investigations with specular finished (Sa ~ 5 nm) blanket copper wafers from a chemical mechanical planarization (CMP) process suggest that the proposed method was …

Acoustic Nonlinearity Parameters For Transversely Isotropic Polycrystalline Materials, Christopher M. Kube, Joseph A. Turner

Department of Mechanical and Materials Engineering: Faculty Publications

This article considers polycrystalline materials with macroscopic elastic anisotropy and the effect of the anisotropy on the quadratic nonlinearity parameter used to describe second harmonic generation in solids. The polycrystal is assumed to have transversely isotropic elastic symmetry, which leads to a directional dependence of the nonlinearity parameters. Additionally, the anisotropy leads to second harmonic generation from an input shear wave. Estimates of the longitudinal and shear wave nonlinearity parameters are given as a function of single-crystal elastic constants, macroscopic anisotropy constants, and propagation direction. An inverse model is presented that relates measured nonlinearity parameters to the macroscopic anisotropy constants. …

Interfacial Electronic Structure At The Ch3nh3pbi3/Moox Interface, Peng Liu, Xiaoliang Liu, Lu Lyu, Haipeng Xie, Hong Zhang, Dongmei Niu, Han Huang, Cheng Bi, Zhengguo Xiao, Jinsong Huang, Yongli Gao

Department of Mechanical and Materials Engineering: Faculty Publications

Interfacial electronic properties of the CH₃NH₃PbI₃ (MAPbI₃)/M_oOx interface are investigated using ultraviolet photoemission spectroscopy and X-ray photoemission spectroscopy. It is found that the pristine MAPbI₃ film coated onto the substrate of poly (3,4-ethylenedioxythiophene) poly(styrenesulfonate)/indium tin oxide by two-step method behaves as an n-type semiconductor, with a band gap of ~1.7 eV and a valence band edge of 1.40 eV below the Fermi energy (EF). With the MoOx deposition of 64A ° upon MAPbI3, the energy levels of MAPbI3 shift toward higher binding energy by 0.25 eV due to electron transfer …

The Operation Mechanism Of Poly(9,9-Dioctylfluorenyl-2,7-Diyl) Dots In High Efficiency Polymer Solar Cells, Chunyu Liu, Yeyuan He, Xinyuan Zhang, Zhiqi Li, Liang Shen, Zhihui Zhang, Wenbin Guo, Shengping Ruan

Department of Mechanical and Materials Engineering: Faculty Publications

The highly efficient polymer solar cells were realized by doping poly(9,9-dioctylfluorenyl-2,7-diyl) (PFO) dots into active layer. The dependence of doping amount on devices performance was investigated and a high efficiency of 7.15% was obtained at an optimal concentration, accounting for a 22.4% enhancement. The incorporation of PFO dots (Pdots) is conducted to the improvement of Jsc and fill factor mainly due to the enhancement of light absorption and charge transport property. Pdots blended in active layer provides an interface for charge transfer and enables the formation of percolation pathways for electron transport. The introduction of Pdots was proven an effective …

Characterization Of Closed Head Impact Injury In Rat, Yi Hua, Praveen Akula, Matthew Kelso, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

The closed head impact (CHI) rat models are commonly used for studying the traumatic brain injury. The impact parameters vary considerably among different laboratories, making the comparison of research findings difficult. In this work, numerical CHI experiments were conducted to investigate the sensitivities of intracranial responses to various impact parameters (e.g., impact depth, velocity, and position; impactor diameter, material, and shape). A three-dimensional finite element rat head model with anatomical details was subjected to impact loadings. Results revealed that impact depth and impactor shape were the two leading factors affecting intracranial responses.The influence of impactor diameter was region-specific and an …

Evaluation Of Peritoneal Microbubble Oxygenation Therapy In A Rabbit Model Of Hypoxemia, Nathan D. Legband, Jameel A. Feshitan, Mark A. Borden, Benjamin S. Terry

Department of Mechanical and Materials Engineering: Faculty Publications

Alternative extrapulmonary oxygenation technologies are needed to treat patients suffering from severe hypoxemia refractory to mechanical ventilation. We previously demonstrated that peritoneal microbubble oxygenation (PMO), in which phospholipid-coated oxygen microbubbles (OMBs) are delivered into the peritoneal cavity, can successfully oxygenate rats suffering from a right pneumothorax. This study addressed the need to scale up the procedure to a larger animal with a splanchnic cardiac output similar to humans. Our results show that PMO therapy can double the survival time of rabbits experiencing complete tracheal occlusion from6.6 ± 0.6 min for the saline controls to 12.2 ± 3.0 min for the …

Energy Intensity And Environmental Impact Metrics Of The Back-End Separation Of Ethylene Plant By Thermodynamic Analysis, Mahdi H. Alhajji, Yaşar Demirel

Department of Chemical and Biomolecular Engineering: Faculty Publications

This study presents metrics of energy intensity and environmental impact of the back-end separation of ethylene plant consisting three interacting distillation columns by thermodynamic analysis. The objective is to explore the scope of reducing the energy for utilities and CO₂ emissions. Thermodynamic analysis is carried out using the column targeting tool (CTT) to address the sustainability metrics of ‘Energy Intensity.’ CTT is based on the ‘Practical Near-Minimum Thermodynamic Condition’ representing a close to practical reversible column operation. Environmental impact metrics are estimated from the carbon tracking options. The carbon tracking are estimated by the CO₂ emission data source …

Chemical Storage Of Wind Energy By Renewable Methanol Production: Feasibility Analysis Using A Multi-Criteria Decision Matrix, Michael J. Matzen, Mahdi H. Alhajji, Yaşar Demirel

Department of Chemical and Biomolecular Engineering: Faculty Publications

This study is for the technoeconomic analysis of an integral facility consisting of wind energy-based electrolytic hydrogen production, bioethanol-based carbon dioxide capture and compression, and direct methanol synthesis. ASPEN Plus was used to simulate the facility producing 97.01 mt (metric tons) methanol/day using 138.37 mt CO₂/day and 18.56 mt H₂/day. A discounted cash flow diagram for the integral facility is used for the economic analysis at various hydrogen production costs and methanol selling prices. The feasibility analysis is based on a multi-criteria decision matrix consisting of economic and sustainability indicators comparing renewable and non-renewable methanol productions. …

Uncertainty Analysis Of An Irrigation Scheduling Model For Water Management In Crop Production, S. Mun, G. F. Sassenrath, Amy M. Schmidt, N. Lee, M. C. Wadsworth, B. Rice, Jason Q, Corbitt, J. M. Schneider, M. L. Tagert, J. Pote, R. Prabhu

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Irrigation scheduling tools are critical to allow producers to effectively manage water resources for crop production. To be useful, these tools need to be accurate, complete, and relatively reliable. The current work presents an uncertainty analysis and its results for the Mississippi Irrigation Scheduling Tool (MIST) model, showing the margin of error (uncertainty) of the resulting irrigation advice arising solely from the propagation of measurement uncertainty through the MIST calculations. The final relative uncertainty in the water balance value from MIST was shown to be around 9% of that value, which is in the normal range of the margin of …

Development Of A Turbidity Prediction Methodology For Runoff-Erosion Models, Sagar Neupane, Jason R. Vogel, Daniel E. Storm, Bill J. Barfield, Aaron R. Mittelstet

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Surface water bodies can be impaired by turbidity and excessive sediment loading due to urban development, construction activities, and agricultural practices. Turbidity has been considered as a proxy for evaluating water quality, aquatic habitat, and aesthetic impairments in surface waters. The US Environment Protection Agency (USEPA) has listed turbidity and sediment as major pollutants for construction site effluent. Recently proposed USEPA regulations for construction site runoff led to increased interest in methods to predict turbidity in runoff based on parameters that are more commonly predicted in runoff- erosion models. In this study, a turbidity prediction methodology that can be easily …

Robust Estimates Of Soil Moisture And Latent Heat Flux Coupling Strength Obtained From Triple Collocation, Wade T. Crow, Fangni Lei, Christopher R. Hain, Martha C. Anderson, Russell L. Scott, David P. Billesbach, Timothy Arkebauer

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Land surface models (LSMs) are often applied to predict the one-way coupling strength between surface soil moisture (SM) and latent heat (LH) flux. However, the ability of LSMs to accurately represent such coupling has not been adequately established. Likewise, the estimation of SM/LH coupling strength using ground-based observational data is potentially compromised by the impact of independent SM and LH measurements errors. Here we apply a new statistical technique to acquire estimates of one-way SM/LH coupling strength which are nonbiased in the presence of random error using a triple collocation approach based on leveraging the simultaneous availability of independent SM …

Using Swat To Simulate Crop Yields And Salinity Levels In The North Fork River Basin, Usa, Aaron R. Mittelstet, Daniel E. Storm, Art L. Stoecker

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Crop yields and salinity levels in the North Fork of the Red River (North Fork River) basin, located in southwestern Oklahoma and the Texas Panhandle, were analyzed based on the diverse climate in the region. Saline irrigation water is a major problem in the basin. The Elm Fork Creek flows through salt deposits, making the creek and its receiving stream, the North Fork River, too saline to use for irrigation. This greatly reduces the number of hectares that can be utilized for agricultural crops within the basin. A baseline SWAT model was setup, calibrated and validated to simulate streamflow and …

Identifying Intracellular Pdna Losses From A Model Of Nonviral Gene Delivery, Timothy Michael Martin, Beata Joanna Wysocki, Tadeusz Antoni Wysocki, Angela K. Pannier

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Nonviral gene delivery systems are a type of nanocommunication system that transmit plasmid packets (i.e., pDNA packets) that are programmed at the nanoscale to biological systems at the microscopic cellular level. This engineered nanocommunication system suffers large pDNA losses during transmission of the genetically encoded information, preventing its use in biotechnological and medical applications. The pDNA losses largely remain uncharacterized, and the ramifications of reducing pDNA loss from newly designed gene delivery systems remain difficult to predict. Here, the pDNA losses during primary and secondary transmission chains were identified utilizing a MATLAB model employing queuing theory simulating delivery of pEGFPLuc …

Narrow Grass Hedges Reduce Tylosin And Associated Antimicrobial Resistance Genes In Agricultural Runoff, Bhavneet Soni, Shannon L. Bartelt-Hunt, Daniel D. Snow, John E. Gilley, Bryan Woodbury, David B. Marx, Xu Li

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Agricultural runoff from areas receiving livestock manure can potentially contaminate surface water with antimicrobials and antimicrobial resistance genes (ARGs). The objective of this study was to investigate the effectiveness of narrow grass hedges (NGHs) on reducing the transport of antimicrobials and ARGs in runoff after land application of swine manure slurry. Plot-scale rainfall simulation tests were conducted on 0.75 m by 4.0 m plots designed to test three treatment factors: manure amendment (control plots receiving no manure vs. amended plots receiving manure based on 3 times N requirement), NGH (plots with a NGH vs. plots without a NGH), and rainfall …

Surface Energy Balance, Evapotranspiration, And Surface Coefficients During Non-Growing Season In A Maize-Soybean Cropping System, Lameck O. Odhiambo, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Surface energy balance components, including actual evapotranspiration (ET), were measured in a reducedtill maize-soybean field in south central Nebraska during three consecutive non-growing seasons (2006/2007, 2007/2008, and 2008/2009). The relative fractions of the energy balance components were compared across the non-growing seasons, and surface coefficients (K_c) were determined as a ratio of measured ET to estimated alfalfa (ET_r) and grass (ET_o) reference ET (ET_ref). The non-growing season following a maize crop had 25% to 35% more field surface covered with crop residue as compared to the non-growing seasons following soybean crops. Net …

Temporal Endogenous Gene Expression Profiles In Response To Lipid-Mediated Transfection, Timothy M. Martin, Sarah A. Plautz, Angela K. Pannier

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Background — Design of efficient nonviral gene delivery systems is limited as a result of the rudimentary understanding of the specific molecules and processes that facilitate DNA transfer.

Methods — Lipoplexes formed with Lipofectamine 2000 (LF2000) and plasmid-encoding green fluorescent protein (GFP) were delivered to the HEK 293T cell line. After treating cells with lipoplexes, HG-U133 Affymetrix microarrays were used to identify endogenous genes differentially expressed between treated and untreated cells (2 h exposure) or between flow-separated transfected cells (GFP+) and treated, untransfected cells (GFP–) at 8, 16 and 24 h after lipoplex treatment. Cell priming studies were conducted using …

Temporal Endogenous Gene Expression Profiles In Response To Polymer-Mediated Transfection And Profile Comparison To Lipid-Mediated Transfection, Timothy M. Martin, Sarah A. Plautz, Angela K. Pannier

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Background Design of efficient nonviral gene delivery systems is limited by the rudimentary understanding of specific molecules that facilitate transfection.

Methods Polyplexes using 25-kDa polyethylenimine (PEI) and plasmid encoding green fluorescent protein (GFP) were delivered to HEK 293T cells. After treating cells with polyplexes, microarrays were used to identify endogenous genes differentially expressed between treated and untreated cells (2 h of exposure) or between flow-separated transfected cells (GFP+) and treated, untransfected cells (GFP–) at 8, 16 and 24 h after lipoplex treatment. Cell priming studies were conducted using pharmacologic agents to alter endogenous levels of the identified differentially expressed genes …

Vulnerability Of Crops And Native Grasses To Summer Drying In The U.S. Southern Great Plains, Naama Raz-Yaseef, Dave P. Billesbach, Marc L. Fischer, Sebastien C. Biraud, Stacey A. Gunter, James A. Bradford, Margaret S. Torn

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The Southern Great Plains are characterized by a fine-scale mixture of different land-cover types, predominantly winter-wheat and grazed pasture, with relatively small areas of other crops, native prairie, and switchgrass. Recent droughts and predictions of increased drought in the Southern Great Plains, especially during the summer months, raise concern for these ecosystems. We measured ecosystem carbon and water fluxes with eddy-covariance systems over cultivated cropland for 10 years, and over lightly grazed prairie and new switchgrass fields for 2 years each. Growing-season precipitation showed the strongest control over net carbon uptake for all ecosystems, but with a variable effect: grasses …

A Sustainable Slashing Industry Using Biodegradable Sizes From Modified Soy Protein To Replace Petro-Based Poly(Vinyl Alcohol), Yi Zhao, Yuzhu Zhao, Helan Xu, Yiqi Yang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Biodegradable sizing agents from triethanolamine (TEA) modified soy protein could substitute poly(vinyl alcohol)(PVA) sizes for high-speed weaving of polyester and polyester/cotton yarns to substantially decrease environmental pollution and impel sustainability of textile industry. Nonbiodegradable PVA sizes are widely used and mainly contribute to high chemical oxygen demand (COD) in textile effluents. It has not been possible to effectively degrade, reuse or replace PVA sizes so far. Soy protein with good biodegradability showed potential as warp sizes in our previous studies. However, soy protein sizes lacked film flexibility and adhesion for required high-speed weaving. Additives with multiple hydroxyl groups, nonlinear molecule, …

Sustainable And Hydrolysis-Free Dyeing Process For Polylactic Acid Using Nonaqueous Medium, Suxin Xu, Jiangang Chen, Bijia Wang, Yiqi Yang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A sustainable and hydrolysis-free dyeing process was developed for polylactic acid (PLA) fibers. PLA is a biobased alternative to petroleum based polyethylene terephthalate (PET), which is the most widely used textile fiber. However, the hydrolytic degradation of PLA fibers under the conventional aqueous dyeing conditions limited its applications in textile industry. A new solvent dyeing process was developed using liquid paraffin as a nonaqueous dyeing medium. High quality dyed PLA fabrics were obtained without consuming water and auxiliaries. Minimal strength loss of dyed fibers was achieved by postheat setting treatment. The 3R principle (reduce, reuse, and recycle) was implemented to …

Robust And Flexible Films From 100% Starch Cross-Linked By Biobased Disaccharide Derivative, Helan Xu, Hazal Canisag, Bingnan Mu, Yiqi Yang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In this research, oxidized sucrose, a novel aldehyde-based green cross-linker, endowed starch films with substantial improvement in both tensile strength and elongation, whereas many other cross-linkers did not. Starch films are usually weak, brittle, and highly moisture sensitive, and thus have restricted industrial applications. Cross-linking is one of the most common methods to tackle these problems. However, most of the available cross-linkers are either toxic, expensive, or with low cross-linking efficiencies. Oxidized sucrose is a green cross-linker with multiple aldehyde groups per molecule to cross-link starch molecules via forming hemiacetals/acetals. The starch films cross-linked with oxidized sucrose had tensile strength …

Chitosan-Alginate Scaffold Cell Culture System And Related Methods, Miqin Zhang, Forrest Kievit, Matthew Chi-Hang Leung, Stephen Florczyk

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Methods for culturing cancer cells in vitro using a three dimensional scaffold, scaffolds that include the cultured cancer cells, and methods for using the cultured cancer cells and the scaffolds that include the cultured cancer cells in anticancer therapeutic drug development.

Bionanotechnology And The Future Of Glioma, Peter A. Chiarelli, Forrest M. Kievit, Miqin Zhang, Richard G. Ellenbogen

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Designer nanoscaled materials have the potential to revolutionize diagnosis and treatment for glioma. This review summarizes current progress in nanoparticle‑based therapies for glioma treatment including targeting, drug delivery, gene delivery, and direct tumor ablation. Preclinical and current human clinical trials are discussed. Although progress in the field has been significant over the past decade, many successful strategies demonstrated in the laboratory have yet to be implemented in human clinical trials. Looking forward, we provide examples of combined treatment strategies, which harness the potential for nanoparticles to interact with their biochemical environment, and simultaneously with externally applied photons or magnetic fields. …

Nanoparticle Mediated Silencing Of Dna Repair Sensitizes Pediatric Brain Tumor Cells To Y-Irradiation, Forrest M. Kievit, Zachary R. Stephen, Kui Wang, Christopher J. Dayringer, Jonathan G. Sham, Richard G. Ellenbogen, John R. Silber, Miqin Zhang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Medulloblastoma (MB) and ependymoma (EP) are the most common pediatric brain tumors, afflicting 3000 children annually. Radiotherapy (RT) is an integral component in the treatment of these tumors; however, the improvement in survival is often accompanied by radiation-induced adverse developmental and psychosocial sequelae. Therefore, there is an urgent need to develop strategies that can increase the sensitivity of brain tumors cells to RT while sparing adjacent healthy brain tissue. Apurinic endonuclease 1 (Ape1), an enzyme in the base excision repair pathway, has been implicated in radiation resistance in cancer. Pharmacological and specificity limitations inherent to small molecule inhibitors of Ape1 …

Technoeconomics And Sustainability Of Renewable Methanol And Ammonia Productions Using Wind Power-Based Hydrogen, Michael J. Matzen, Mahdi H. Alhajji, Yaşar Demirel

Yaşar Demirel Publications

This study analyzes and compares the economics and sustainability aspects of two hydrogenation processes for producing renewable methanol and ammonia by using wind-power based electrolytic hydrogen. Carbon dioxide from an ethanol plant is used for producing methanol, while the nitrogen is supplied by an Air Separation Unit (ASU) for producing ammonia. The capacities are 99.96 mt/day methanol and 1202.55 mt/day anhydrous ammonia. The methanol plant requires 138.37 mt CO₂/day and 19.08 mt H₂/day. The ammonia is synthesized by using 217.72 mt H₂/day and 1009.15 mt N₂/day. The production costs and the carbon …

Integrating Ecological And Engineering Concepts Of Resilience In Microbial Communities, Hyun-Seob Song, Ryan S. Renslow, Jim K. Fredrickson, Stephen R. Lindemann

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Many definitions of resilience have been proffered for natural and engineered ecosystems, but a conceptual consensus on resilience in microbial communities is still lacking. We argue that the disconnect largely results from the wide variance in microbial community complexity, which range from compositionally simple synthetic consortia to complex natural communities, and divergence between the typical practical outcomes emphasized by ecologists and engineers. Viewing microbial communities as elasto-plastic systems that undergo both recoverable and unrecoverable transitions, we argue that this gap between the engineering and ecological definitions of resilience stems from their respective emphases on elastic and plastic deformation, respectively. We …

Lidar Scanning With Supplementary Uav Captured Images For Structural Inspections, Richard L. Wood, Mohammad Ebrahim Mohammadi

Department of Civil and Environmental Engineering: Faculty Publications

Structural assessment using remote sensing technologies can be performed efficiently and effectively using such technologies as LiDAR (light detection and ranging). LiDAR can be employed for various structural assessments, such as as-built conditions for a newly constructed facility, routine inspection during its service life, or structural collapse evaluation after a natural hazard or extreme event. However, the main disadvantage of LiDAR is that it is a line-of-sight technology that can result in significant occlusions. Architectural or structural components can be partially or fully occluded by another object with respect to the location of the laser scanner. Supplemental photogrammetry techniques, such …