Engineering Commons^™

High-Speed Adaptive Wireless Body Area Networks, Miftadi Sudjai, Le Chung Tran, Farzad Safaei, Tadeusz Wysocki, Son Lam Phung

Department of Electrical and Computer Engineering: Faculty Publications

Adaptive ultra-wideband wireless body area network (WBAN) is proposed in this paper as a feasible mobile health platform, offering a high-speed and robust service. It employs a space-time-frequency-coded (STFC) multiband orthogonal frequency division multiplexing ultra-wideband technology. It is designed to improve the average bit error performance for high data rate applications while maintaining a reasonably high throughput in body-to-external links of a WBAN. The proposed adaptive WBAN comprises two novel components, namely, the frame transmission model and the bit error rate (BER) estimation-based adaptive algorithm. In addition, the optimization of adaptive parameters is conducted to obtain an extra improvement, hence …

Identification And Characterization Of Irregular Consumptions Of Load Data, Desh Deepak Sharma, S. N. Singh, Jeremy Lin, Elham Foruzan

Department of Electrical and Computer Engineering: Faculty Publications

The historical information of loadings on substation helps in evaluation of size of photovoltaic (PV) generation and energy storages for peak shaving and distribution system upgrade deferral. A method, based on consumption data, is proposed to separate the unusual consumption and to form the clusters of similar regular consumption. The method does optimal partition of the load pattern data into core points and border points, high and less dense regions, respectively. The local outlier factor, which does not require fixed probability distribution of data and statistical measures, ranks the unusual consumptions on only the border points, which are a few …

Anisotropy, Phonon Modes, And Lattice Anharmonicity From Dielectric Function Tensor Analysis Of Monoclinic Cadmium Tungstate, Alyssa Mock, Rafal Korlacki, Sean Knight, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

We determine the frequency dependence of four independent Cartesian tensor elements of the dielectric function for CdWO₄ using generalized spectroscopic ellipsometry within mid-infrared and far-infrared spectral regions. Different single crystal cuts, (010) and (001), are investigated. From the spectral dependencies of the dielectric function tensor and its inverse we determine all long-wavelength active transverse and longitudinal optic phonon modes with A_u and B_u symmetry as well as their eigenvectors within the monoclinic lattice. We thereby demonstrate that such information can be obtained completely without physical model line-shape analysis in materials with monoclinic symmetry. We then augment the …

Shielding Effectiveness Performance Of Conductive Concrete Structures, Lim Nguyen, Aaron Krause, Christopher Tuan, Joel D. Blasey, Holly Mcnerney, Ferdinand J. Metzger

Department of Electrical and Computer Engineering: Faculty Publications

Conductive concrete mixtures have been designed and demonstrated to perform electromagnetic shielding. This paper describes the design, testing methods, and results obtained from the development of conductive concrete construction for structured electromagnetic shielding.

Integrated Mid-Infrared, Far Infrared And Terahertz Optical Hall Effect (Ohe) Instrument, And Method Of Use, Tino Hofmann, Mathias M. Schubert, Stefan Schoeche, Sean Knight, Craig M. Herzinger, John A. Woollam, Greg K. Pribil, Thomas E. Tiwald

Department of Electrical and Computer Engineering: Faculty Publications

System Stage, and Optical Hall Effect (OHE) system method for evaluating such as free charge carrier effective mass, concentration, mobility and free charge carrier type in a (51) Int. Ci. sample utilizing a permanent magnet at room temperature.

Systems And Methods Using Drawings Which Incorporate Bometric Data Assecurity Information, Cliff Xiaongang Wang, Wesley E. Snyder, Benjamin S. Riggan

Department of Electrical and Computer Engineering: Faculty Publications

Systems and method using drawings as security information are disclosed. According to an aspect, a computing device may include a touchscreen display configured to receive information for drawing a security manager configured to determined one or more characteristics associated with input of the gesture information. The security manager may also be configured to authenticate a user based on the drawn security picture and the one or more characteristics associated with input of the gesture information.

Experimental Study Of Corrugated Metal-Composite Tubes Under Axial Loading, Arameh Eyvazian, Hozhabr Mozafari, Abdel Magid Hamouda

Department of Mechanical and Materials Engineering: Faculty Publications

In this study, crushing behavior of corrugated metal-composite tube was examined experimentally under axial loading condition. Six types of specimens, classified into two groups of metal and metal-composite, were tested under quasi static axial loading. The failure mechanism and failure history of the specimens were presented and discussed. The experimental result showed that corrugated metal composite tubes demonstrate perfect energy absorption characteristics in terms of uniformity of load-displacement diagram, reduction of initial peak load and controlling failure mechanism. Moreover, it was also found that adding filament wound layer of composite on the surface of metallic corrugated tube compensated weakness of …

Disturbed Cyclical Stretch Of Endothelial Cells Promotes Nuclear Expression Of The Pro-Atherogenic Transcription Factor Nf-Kb, Ryan M. Pedrigi, Konstantinos I. Papadimitriou, Avinash Kondiboyina, Sukhjinder Sidhu, James Chau, Miten B. Patel, Daniel C. Baeriswyl, Emmanuel M. Drakakis, Rob Krams

Department of Mechanical and Materials Engineering: Faculty Publications

Exposure of endothelial cells to low and multidirectional blood flow is known to promote a pro-atherogenic phenotype. The mechanics of the vessel wall is another important mechano-stimulus within the endothelial cell environment, but no study has examined whether changes in the magnitude and direction of cell stretch can be pro-atherogenic. Herein, we developed a custom cell stretching device to replicate the in vivo stretch environment of the endothelial cell and examined whether low and multidirectional stretch promote nuclear translocation of NF-kB. A fluid–structure interaction model of the device demonstrated a nearly uniform strain within the region of cell attachment and …

Reconceptualizing Pedagogical And Curricular Knowledge Development Through Making, Steven Greenstein, Justin Olmanson

Department of Teaching, Learning, and Teacher Education: Faculty Publications

While making is typically tethered to narratives of entrepreneurship and business, it can provide a gateway to meaningful interaction and deepened understanding of both content and pedagogy. In this article we provide descriptions of two courses—one each at the pre-service and in-service levels—that engage teachers in making and design practices that we hypothesized would inform their pedagogical and curricular thinking. With a focus on the design of new tools to support teaching and learning through the use of human-centered design practices and digital fabrication technologies, these courses have teachers exploring at the intersection of content, pedagogy, and making. Specifically, they …

Lifelong Learning: A Strategic Analysis Of Education, Iwasan D. Kejawa Ed.D

Department of Teaching, Learning, and Teacher Education: Faculty Publications

Are outdated traditional education, distance education, information technological infrastructure, partnerships and financial resources common problematic issues facing many of the educational institutions in our world today? With this into considerations, are these issues vital in order to stabilize the political and economic embroidery of an institution or organization, and its psychological and sociological awareness? What is it that is to be learned and thought in our institutions and, what really is lifelong education; and how is to be carried out in the society of ours? It is found that education may be the training of the mind to perform desire …

Investigating Students’ Perception Using Construction Management Simulations, Saeed Rokooei, James D. Goedert, Asregedew Woldesenbet

Department of Construction Engineering and Management: Faculty Publications

Today, construction programs are incorporating a wide variety of active learning methods in their curricula to improve student learning outcomes and induce a more knowledge retention rate. Simulations and educational games are one of the fast growing and effective active learning methods that have been implemented in many programs. However, there are few instances of such learning methods applied in construction programs and a limited number of research projects have been conducted to investigate short-term and long-term outcomes of these methods and applications. This paper presents construction students’ perceptions of tested simulations with regards to the features, knowledge gained, level …

2017 State Of Resnet Report Acuta/Acuho-1

ACUTA: Other Publications

Copyright 2017 Association for College and University Technology Advancement & Association of College and University Housing Officers -International 2017

Sugar Versus Lipid For Sustainable Biofuels, Yaşar Demirel

Yaşar Demirel Publications

Introduction

First‐generation biofuels, namely, ethanol and biodiesel, have led to far reaching impact on the peoples’ life world‐wide.[1] However, they inter-fere with the food supply chain and may not be sustainable although some of the biomass are converted to biofuels after those biomasses have met the human needs. Still, the first‐generation–based biofuels have proved that sugar and lipid platforms can be an answer to energy security and global warming concerns without the need for new infrastructure for feedstock delivery as well as for biomass‐to‐biofuel conversion tech-nologies. At the same time, we are discovering and assessing the long‐term environmental im-plications on …

A Novel Diffuse Fraction-Based Two-Leaf Light Use Efficiency Model: An Application Quantifying Photosynthetic Seasonality Across 20 Ameriflux Flux Tower Sites, Hao Yan, Shao-Qiang Wang, Kai-Liang Yu, Bin Wang, Qin Yu, Gil Bohrer, Dave P. Billesbach, Rosvel Bracho, Faiz Rahman

Department of Agricultural and Biological Systems Engineering: Faculty Publications

.

Diffuse radiation can increase canopy light use efficiency (LUE). This creates the need to differentiate the effects of direct and diffuse radiation when simulating terrestrial gross primary production (GPP). Here, we present a novel GPP model, the diffuse-fraction-based two-leaf model (DTEC), which includes the leaf response to direct and diffuse radiation, and treats maximum LUE for shaded leaves (ε_msh defined as a power function of the diffuse fraction (D_f)) and sunlit leaves (ε_msu defined as a constant) separately. An Amazonian rainforest site (KM67) was used to calibrate the model by simulating the linear relationship between …

Gas Generation, Haorong Li, Daihong Yu, Yanshun Yu

Durham School of Architectural Engineering and Construction: Faculty Publications

A first system includes a feedstock load port and a feedstock discharge port. The first system also includes a tank configured to retain biomass feedstock for aerobic biodegradation. The first system further includes a mechanical ventilator in fluid communication with the tank. The mechanical ventilator is configured to supply air to facilitate the aerobic biodegradation of the biomass feedstock. The first system also includes an exhaust port configured to receive gas generated during the aerobic biodegradation. A second system includes a feedstock load port and a feedstock discharge port. The second system also includes a pressure vessel configured to retain …

Quantification Of Re-Absorption And Re-Emission Processes To Determine Photon Recycling Efficiency In Perovskite Single Crystals, Yanjun Fang, Haotong Wei, Qingfeng Dong, Jinsong Huang

Department of Mechanical and Materials Engineering: Faculty Publications

Photon recycling, that is, iterative self-absorption and re-emission by the photoactive layer itself, has been speculated to contribute to the high open-circuit voltage in several types of high efficiency solar cells. For organic–inorganic halide perovskites that have yielded highly efficient photovoltaic devices, however, it remains unclear whether the photon recycling effect is significant enough to improve solar cell efficiency. Here we quantitatively evaluate the re-absorption and re-emission processes to determine photon recycling efficiency in hybrid perovskite with its single crystals by measuring the ratio of the re-emitted photons to the initially excited photons, which is realized by modulating their polarization …

Target Lesion Calcium Arc Influence The Performance Of Stenting, Pengfei Dong, Shengmao Lin, David L. Wilson, Hiram G. Bezerra, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Percutaneous coronary intervention (PCI) is the most common revascularization procedure, in which, fibrocalcific plaques are found in 17–35% of patients undergoing PCI [1]. Numbers will rise with population aging and prolonged statin treatment. Calcifications often lead to stent under expansion and strut malapposition, with increased risk of thrombosis and in-stent restenosis [2]. Presence of calcium strongly inhibits stent performance, a well-documented metric for outcome [3]. The goal of this work is to develop the finite element models for inspecting the influence of the calcium arc extent on the stenting outcomes, such as the stress and strain distribution within the plaque, …

Growth Mechanisms Of Multiscale, Mound-Like Surface Structures On Titanium By Femtosecond Laser Processing, Edwin Peng, Ryan Bell, Craig A. Zuhlke, Meiyu Wang, Dennis R. Alexander, George Gogos, Jeffrey E. Shield

Department of Mechanical and Materials Engineering: Faculty Publications

Femtosecond laser surface processing (FLSP) can be used to functionalize many surfaces, imparting specialized properties such as increased broadband optical absorption or superhydrophobicity/- hydrophilicity. In this study, the subsurface microstructure of a series of mound-like FLSP structures formed on commercially pure titanium using five combinations of laser fluence and cumulative pulse counts was studied. Using a dual beam Scanning Electron Microscope with a Focused Ion Beam, the subsurface microstructure for each FLSP structure type was revealed by cross-sectioning. The microstructure of the mounds formed using the lowest fluence value consists of the original Ti grains. This is evidence that preferential …

Dissipative Elastic Metamaterial With A Lowfrequency Passband, Yongquan Liu, Jianlin Yi, Zheng Li, Xianyue Su, Wenlong Li, Mehrdad Negahban

Department of Mechanical and Materials Engineering: Faculty Publications

We design and experimentally demonstrate a dissipative elastic metamaterial structure that functions as a bandpass filter with a low-frequency passband. The mechanism of dissipation in this structure is well described by a mass-spring-damper model that reveals that the imaginary part of the wavenumber is non-zero, even in the passband of dissipative metamaterials. This indicates that transmittance in this range can be low. A prototype for this viscoelastic metamaterial model is fabricated by 3D printing techniques using soft and hard acrylics as constituent materials. The transmittance of the printed metamaterial is measured and shows good agreement with theoretical predictions, demonstrating its …

Narrowband Nanocomposite Photodetector, Jinsong Huang, Fawen Guo, Liang Shen

Department of Mechanical and Materials Engineering: Faculty Publications

A photodetector includes an anode that is transparent or partially transparent to light, a cathode and an active layer disposed between the anode and the cathode. The active layer includes a nanocomposite material that has a polymer blended with nanoparticles or organic electron trapping particles. The photodetector has a low dark current when not illuminated by light and has a high conductivity when illuminated by light, in which the light passes the anode and is absorbed by the active layer. The active layer has a thickness selected such that the photodetector has a narrowband spectral response.

Role Of Copper Oxide Layer On Pool Boiling Performance With Femtosecond Laser Processed Surfaces, Corey Kruse, Edwin Peng, Craig Zuhlke, Jeff Shield, Dennis Alexander, Sidy Ndao, George Gogos

Department of Mechanical and Materials Engineering: Faculty Publications

Copper pool boiling surfaces are tested for pool boiling enhancement due to femtosecond laser surface processing (FLSP). FLSP creates self-organized micro/nanostructures on metallic surfaces and creates highly wetting and wicking surfaces with permanent surface features. In this study two series of samples were created. The first series consists of three flat FLSP copper surfaces with varying microstructures and the second series is an open microchannel configuration with laser processing over the horizontal surfaces of the microchannels. These microchannels range in height from 125 microns to 380 microns. Each of these surfaces were tested for pool boiling performance. It was found …

Field Characterization Of Field Capacity And Root Zone Available Water Capacity For Variable Rate Irrigation, Tsz Him Lo, Derek M. Heeren, Luciano Mateos, Joe D. Luck, Derrel L. Martin, Keith A. Miller, J. Burdette Barker, Tim M. Shaver

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Accurate spatial characterization of field capacity (FC) and root zone available water capacity (R) can enhance site-specific management practices—such as variable rate irrigation—to lower input costs, reduce contaminant leaching, and/or improve crop yield. Measuring the volumetric water content after wet soils drain following substantial precipitation can provide a field estimate of FC. The average FC (FC_a) for the managed root zone was determined at thirty-two locations in a topographically variable field in south central Nebraska. The difference between FC and permanent wilting point estimates—computed using a pedotransfer function—yielded values for R for the observation locations. Sampling locations were …

Test 2176: Kubota M7-131, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2180: Claas Axion 820, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2189: Kubota M7-151, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test 2175: Claas Xerion 5000 Cvt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test 2172: John Deere 8400r E23, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1149 Challenger 1046, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1148 Challenger 1042, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1147 Challenger 1038, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …