Engineering Commons^™

The Magnetic, Electrical And Structural Properties Of Copper-Permalloy Alloys, Makram A. Qader, A. Vishina, Lei Yu, Cougar Garcia, Rakesh K. Singh, Nicholas D. Rizzo, Mengchu Huang, Ralph Chamberlin, Kirill Belashchenko, Mark Van Schilfgaarde, N. Newman

Kirill Belashchenko Publications

Copper-permalloy [Cu_1–x(Ni₈₀Fe₂₀)_x] alloy films were deposited by co-sputtering and their chemical, structural, magnetic, and electrical properties were characterized. These films are found to have favorable weak ferromagnetic properties for low temperature magnetoelectronic applications. Our results show that by varying the composition, the saturation magnetization (M_s) can be tuned from 700 emu/cm³ to 0 and the Curie temperature (T_c), can be adjusted from 900 K to 0 K. The M_s and T_c are found to scale linearly between x = 25% and 100%. Electronic structure calculations …

Geometry-Based Mass Grading Of Mango Fruits Using Image Processing, M. A. Momin, Md Towfiqur Rahman, M. S. Sultana, C. Igathinathane, A. T. M. Ziauddin, T. E. Grift

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Mango (Mangifera indica) is an important, and popular fruit in Bangladesh. However, the post-harvest processing of it is still mostly performed manually, a situation far from satisfactory, in terms of accuracy and throughput. To automate the grading of mangos (geometry and shape), we developed an image acquisition and processing system to extract projected area, perimeter, and roundness features. In this system, images were acquired using a XGA format color camera of 8-bit gray levels using fluorescent lighting. An image processing algorithm based on region based global thresholding color binarization, combined with median filter and morphological analysis was developed …

Injury Severity Of Truck Drivers In Crashes At Highway–Rail Grade Crossings, Waleed Ali Khan

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

There is a noticeable difference between different road users, specifically between passenger vehicles and heavy vehicles such as its length and weight. The majority of previous research were focused on general highway traffic that included passenger cars, trucks, buses, motorcycles, etc. Moreover, HRGC safety studies of specific types of vehicles are relatively few and heavy vehicle safety at grade crossing is even more under-explored.

This research thus focuses on the following objectives: Identify factors related to different injury severity levels of heavy-vehicle drivers (truck/truck-trailer) drivers in crashes reported at HRGCs; to identify a more suitable statistical model for injury severity …

Regulatory Barriers To Approval Of New Technologies For Small Drinking Water Systems, Deanna T. Ringenberg

Department of Environmental Engineering: Theses and Other Student Research

Small drinking water systems face different challenges than large drinking water systems. Innovative technologies can provide cost and reliability benefits to small systems, but new technologies are not frequently considered. One important barrier to the implementation of new technologies is obtaining state drinking water agency approval.

To identify specific state regulatory barriers, a survey including sixteen questions was sent to the 49 state agencies. The survey included questions regarding their acceptance programs, experiences with new technologies, barriers, data needs for technology approval, and interest in a shared approach for acceptance of new technologies. The survey was sent in 2015 and …

Sensor System, Implantable Sensor And Method For Remote Sensing Of A Stimulus In Vivo, Eric H. Ledet, Rebecca A. Wachs, Keegan Paul Cole, David Fiorella

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A sensor system for sensing a stimulus in vivo includes an implantable sensor. The sensor comprises a passive resonator circuit having a resonant frequency and including at least a pair of generally parallel spirally wound unconnected conductive coils sandwiching a layer of solid dielectric material that manifest a change in property affecting the resonant frequency in response to application of the stimulus to the layer. A resonant frequency of the sensor is modulated by altering the spacing or gap between the coils or altering the overlapping area of the coils. The sensor is energized through application of radio frequency energy …

Evaluating The Impacts Of Farmers’ Behaviors On A Hypothetical Agricultural Water Market Based On Double Auction, Erhu Du, Ximing Cai, Barbara Minsker

Daugherty Water for Food Global Institute: Faculty Publications

Agricultural water markets are considered effective instruments to mitigate the impacts of water scarcity and to increase crop production. However, previous studies have limited understanding of how farmers’ behaviors affect the performance of water markets. This study develops an agent-based model to explicitly incorporate farmers’ behaviors, namely irrigation behavior (represented by farmers’ sensitivity to soil water deficit k) and bidding behavior (represented by farmers’ rent seeking l and learning rate b), in a hypothetical water market based on a double auction. The model is applied to the Guadalupe River Basin in Texas to simulate a hypothetical agricultural water market under …

A Tunable, Three-Dimensional In Vitro Culture Model Of Growth Plate Cartilage Using Alginate Hydrogel Scaffolds, Alek G. Erickson, Taylor D. Laughlin, Sarah Romereim, Catherine Sargus-Patino, Angela K. Pannier, Andrew T. Dudley

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Defining the final size and geometry of engineered tissues through precise control of the scalar and vector components of tissue growth is a necessary benchmark for regenerative medicine, but it has proved to be a significant challenge for tissue engineers. The growth plate cartilage that promotes elongation of the long bones is a good model system for studying morphogenetic mechanisms because cartilage is composed of a single cell type, the chondrocyte; chondrocytes are readily maintained in culture; and growth trajectory is predominately in a single vector. In this cartilage, growth is generated via a differentiation program that is spatially and …

Evaluation Of Floorpan Tearing And Cable Splices For Cable Barrier Systems, Scott K. Rosenbaugh, Jason A. Hartwell, Robert W. Bielenberg, Ronald K. Faller, James C. Holloway, Karla A. Lechtenberg

Nebraska Department of Transportation: Research Reports

This research effort consisted of two objectives related to components of a prototype cable barrier system. The first objective was to mitigate the potential for vehicle floorpan tearing by modifying the cable guardrail posts. A bogie vehicle was equipped with a simulated floorpan designed to replicate the height, thickness, and strength of the floorpan of a Kia Rio vehicle. Baseline testing demonstrated that the top of the Midwest Weak Post (MWP) would contact, and crease the simulated floorpan, which matched the damage observed in actual full-scale vehicle crash tests. Once the test setup provided the desired results, various post configurations …

Supraspinatus Tendon Micromorphology In Individuals With Subacromial Pain Syndrome, Federico Pozzi, Amee L. Seitz, Hillary A. Plummer, Kira Chow, Gregory R. Bashford, Lori A. Michener

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Study Design: Cross-sectional cohort. Introduction: Tendon collagen organization can be estimated by peak spatial frequency radius (PSFR) on ultrasound images. Characterizing PSFR can define the contribution of collagen disruption to shoulder symptoms.

Purpose of the Study: The purpose of this was to characterize the (1) supraspinatus tendon PSFR in participants with sub acromial pain syndrome (SPS) and healthy controls; (2) PSFR between participants grouped on a tendon visual quality score; and (3) relationship between PSFR with patient-reported pain, function, and shoulder strength.

Methods: Participants with SPS (n ¼ 20) and age, sex, and arm-dominance matched healthy controls (n ¼ 20) …

Mash Test No. 3-10 Of A Non-Proprietary, High-Tension Cable Median Barrier For Use In 6h:1v V-Ditch (Test No. Mwp-8), Dylan T. Meyer, Karla A. Lechtenberg, Ronald K. Faller, Robert W. Bielenberg, Scott K. Rosenbaugh, John D. Reid

Nebraska Department of Transportation: Research Reports

The Midwest States Pooled Fund Program has been developing a prototype design for a non-proprietary, high-tension cable median barrier for use in a 6H:1V V-ditch. This system incorporates four evenly spaced cables, Midwest Weak Posts (MWP) spaced at 8 to 16 ft (2.4-4.9 m) intervals, and a bolted, tabbed bracket to attach three or four cables to the sides of each post. According to the Manual for Assessing Safety Hardware (MASH) testing matrix for cable barriers installed within a 6H:1V median V-ditch, a series of eight full-scale tests are required to evaluate the safety performance of a system. A ninth …

Length Of Need And Minimum System Length For F-Shape Portable Concrete Barrier, Robert W. Bielenberg, Dylan T. Meyer, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

Portable concrete barrier (PCB) systems are often used to redirect errant vehicles through a combination of inertial resistance, lateral friction loads, and tensile loads developed from the mass and friction of the barrier segments. State departments of transportation (DOTs) and other end users may wish to utilize minimal length PCB installations to shield a hazard or work zone or limit the number of barriers required on the upstream and downstream ends to reduce overall system length. However, concerns with the performance of shorter PCB installations include increased lateral deflections and working widths and barrier pocketing. Additionally, no impact testing has …

Method For The Production Of Substituted Polysaccharides Via Reactive Extrusion, Milford Hanna, Pratik Bhandari

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A reactive extrusion process for the production of substituted polysaccharides, in particular, cellulose acetate, starch acetate, carboxymethyl cellulose, and carboxymethyl starch.

The present application claims the benefit of PCT/ US20111059785 filed on Nov. 8, 2011, which claimed the benefit of U.S. provisional application 611411,521, filed on Nov. 9, 2010, U.S. provisional application 611411,992, filed on Nov. 10, 2010, and U.S. provisional application 611472, 748, filed on Apr. 7, 2011, each of which is which is incorporated herein by reference in its entirety.

The production of substituted polysaccharides such as starch and cellulose acetates and carboxymethylated starches and celluloses have typically …

Testing And Evaluation Of Mash Tl-3 Transition Between Guardrail And Portable Concrete Barriers, Robert W. Bielenberg, Jessica L. Lingenfelter, Justine E. Kohtz, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

Three full-scale vehicle crash tests were conducted according to the Manual for Assessing Safety Hardware (MASH) Test Level 3 (TL-3) safety performance criteria on a transition between the Midwest Guardrail System (MGS) and a portable concrete barrier (PCB) system. The transition system utilized for test nos. MGSPCB-1 through MGSPCB-3 consisted of a standard MGS that overlapped a series of F- shape PCB segments that approached the MGS at a 15H:1V flare. In the overlapped portion of the barrier systems, uniquely-designed blockout holders and a specialized W-beam end shoe mounting bracket were used to connect the systems.

In test no. MGSPCB-1, …

Design And Evaluation Of Modified Centerline Rumble Strips, Yong-Rak Kim, Tae Sun You, Laurence Rilett

Nebraska Department of Transportation: Research Reports

A centerline rumble strip (CLRS) is primarily installed on the centerline of undivided two-lane and two-way roadways to alert drivers that they are moving out of their intended travel lane. The main purpose of CLRSs is to reduce crossover collisions typically caused by inattentive, distracted, drowsy, or fatigued drivers. Despite the safety benefits, CLRSs that were milled over or adjacent to the centerline joint may increase or accelerate the deterioration and degradation of the pavement structure, which has been observed in Nebraska pavements. In this research project, new (or modified) CLRS designs were sought to reduce pavement damage, while satisfying …

Bias And Other Error In Gridded Weather Data Sets And Their Impacts On Estimating Reference Evapotranspiration, Philip A. Blankenau

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Gridded weather data sets are increasingly used in a variety of hydrologic and agricultural applications due to their complete spatial and temporal coverage. One application of gridded data sets is the estimation of evapotranspiration (ET). Several operational remote sensing (RS) approaches for estimating ET, such as the SEBAL, METRIC and EEFlux models, require estimates of reference ET (ETref), where ETref is expected ET from a hypothetical reference crop of clipped grass or alfalfa. Gridded weather data provide for the computation of ETref in all areas of a remote sensing image, and therefore potentially remove the need for dense weather station …

Detection Of Plant Emergence Based On Spatio Temporal Image Sequence Analysis, Bhushit Agarwal

School of Computing: Dissertations, Theses, and Student Research

The phenome of a plant is the sum of all observable phenotypes for that plant. Phenotypes are observable characteristics or traits of a plant. These traits generally reflect a combination of influences from the genotype of the plant and the environment in which the plant has grown and developed. Collecting phenotypic data has traditionally been a slow and costly manual process, albeit one highly necessary for plant breeding and the development of improved agronomic practices. As a result automated methods for plant phenotyping analysis have become an active research field in recent years. Image-based plant phenotyping analysis facilitates extraction of …

In Situ Electron Microscopy Of Plasmon-Mediated Nanocrystal Synthesis, Peter Sutter, Ying Li, Christos Argyropoulos, Eli A. Sutter

Department of Electrical and Computer Engineering: Faculty Publications

Chemical processes driven by nonthermal energy (e.g., visible light) are attractive for future approaches to energy conversion, synthesis, photocatalysis, and so forth. The growth of anisotropic metal nanostructures mediated by excitation of a localized surface plasmon resonance (LSPR) is a prototype example of such a reaction. Important aspects, notably the growth mechanism and a possible role of plasmonic “hot spots” within the metal nanostructures, remain poorly understood. Here, we use in situ electron microscopy to stimulate and image the plasmon-mediated growth of triangular Ag nanoprisms in solution. The quantification of the time-dependent evolution of the lateral size and thickness of …

Smart Feedback Control For Fiber-Optics Acoustic Emission Sensor System, Xiangyu Luo

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Optical fiber sensors for ultrasonic detection have become a subject of much research in recent years. In this thesis, a fiber-optic acoustic emission (AE) sensor system that is capable of performing AE detection, even when the sensor is experiencing large quasi-static strains, is first described. The system consists of a smart selection of a wavelength notch to which a distributed feedback (DFB) laser is locked for high sensitivity AE signal demodulation. A smart feedback control unit for the DFB laser, which is the focus of this thesis, is designed and investigated. The smart control ensures that the AE signal is …

Impact Of Using Spatially Distributed Soils Information On Flood Hydrograph Simulation With Hec-Hms, Matthew J. Nelson

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Hydrologic rainfall-runoff models employ numerical equations to simulate the soil absorption of rainfall and resulting runoff. A number of methods have been developed to model these processes, but the parameters used to define these methods can be difficult to directly measure due to the variable nature of soil properties. They often rely on estimation of hydraulic and hydrologic parameters and calibration to produce accurate results.

A challenge with runoff method parameterization is the need for oversimplification using a lumped modeling approach. While distributed hydrologic modeling techniques are now available, distributed runoff methods are limited in use due to the tradition …

Safer Sweep Auger Operation Using Robotics, Nathan A. Wulf

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This thesis presents a remotely controlled robotic solution for those who must sometimes enter agriculturally confined spaces in attempts to assist with grain bin cleanout, particularly by manipulating the sweep auger. In 2015 alone, there were at least 47 documented incidents that occurred in agriculturally confined spaces, of which more than half were fatal. While there have been several advancements in the quality and effectiveness of sweep augers, there have been very few that offer the safety and adaptability of the robotic solution proposed. This robotic solution is a four-wheeled, skid-steering style robot with camera and lighting attachments that allow …

Peridynamic Models For Fatigue And Fracture In Isotropic And In Polycrystalline Materials, Guanfeng Zhang

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

To improve design and reliability, extensive efforts has been devoted to understanding damage and failure of materials and structures using numerical simulation, as a complement of theory and experiment. In this thesis, peridynamics is adopted to study fatigue and dynamic failure problems.

Fatigue is a major failure mode in engineering structures. Predicting fracture/failure under cyclic loading is a challenging problem. Classical model cannot directly be applied to problems with discontinuities. A peridynamic model is adopted in this work because of important advantages of peridynamics in allowing autonomous crack initiation and propagation. A recently proposed peridynamic fatigue crack model is considered …

Applications Of Femtosecond Laser Processed Metallic Surfaces: Leidenfrost Point And Thermal Stability Of Rare Earth Oxide Coatings, Anton Charles Hassebrook

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In this thesis, micro/nano structured surfaces were created through the use of Femtosecond Laser Surface Processing (FLSP). In the first part of the thesis, an experimental investigation of the effects of droplet diameters and fluid properties on the Leidenfrost temperature of polished and nano/microstructured surfaces has been carried out. Leidenfrost experiments were conducted on a stainless steel 304 polished surface and a stainless steel surface which was processed by a femtosecond laser to form Above Surface Growth (ASG) nano/microstructures. Surface preparation resulted in a root mean square roughness (R_rms) of 4.8 µm and 0.04 µm on the laser …

Development Of Peritoneal Microbubble Oxygenation As An Extrapulmonary Treatment For Hypoxia, Nathan Legband

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Patients affected by a respiratory disease or injury experience a substantially impaired respiratory system and as a consequence are unable to obtain a sufficient amount of oxygen. Hypoxia can quickly result in developing permanent tissue damage or death. Currently, the medical methods of treating hypoxia are mechanical ventilation or extracorporeal membrane oxygenation. However, these treatments are ineffective in certain cases and possess significant additional risks including barotrauma, infection, hemorrhage, and thrombosis.

The extrapulmonary method of peritoneal oxygenation has been investigated by other research groups as a potential alternative to providing supplemental oxygen in hypoxic animals. In peritoneal oxygenation, the peritoneum, …

On The Wetting States Of Low Melting Point Metal Galinstan And Wetting Characteristics Of 3-Dimensional Nanostructured Fractal Surfaces, Ethan Allan Davis

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Exergy, or the availability of energy for useful work, is a critical issue that must be addressed to accommodate growing energy demands of society. Increasing population and steady advancement of technology necessitates novel approaches to the management, conversion, and storage of energy. Per the Lawrence Livermore National Laboratory, approximately 60 percent of the energy used by the United States in 2015 was rejected as waste [1]; a large quantity of which can be assumed to be in the form of heat. Therefore, novel thermal management methods for waste heat are critical to increasing energy efficiency and sustainability in the future. …

Near-Field Thermal Radiation For Solar Thermophotovoltaics And High Temperature Thermal Logic And Memory Applications, Mahmoud Elzouka

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This dissertation investigates Near-Field Thermal Radiation (NFTR) applied to MEMS-based concentrated solar thermophotovoltaics (STPV) energy conversion and thermal memory and logics. NFTR is the exchange of thermal radiation energy at nano/microscale; when separation between the hot and cold objects is less than dominant radiation wavelength (~1 μm). NFTR is particularly of interest to the above applications due to its high rate of energy transfer, exceeding the blackbody limit by orders of magnitude, and its strong dependence on separation gap size, surface nano/microstructure and material properties.

Concentrated STPV system converts solar radiation to electricity using heat as an intermediary through a …

Design And Validation Of An In Vivo Long-Term Attachment Capsule Robot, Wanchuan Xie

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The invention of capsule endoscopy (CE) made the non-invasive monitoring of the entire small bowel possible and became the primary means for diagnosing small bowel pathology. In the last decade, capsule robots have been transformed from diagnostic devices into a widely studied biomedical platform with the potential for active locomotion, drug delivery and therapeutic capabilities. To perform accurate on-site drug release and therapy, it is necessary for a capsule robot to be able to attach to the intestinal tissue and maintain its position long-term. Design challenges derive from the task of long-term mucosal adhesion which requires firm, quick-response attachment without …

5g-Ucda Multi Antenna-To-Logical Cell Circular Fifo Mapping Strategy For High-Speed Train Wireless Communications, Subharthi Banerjee

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

2020 is the target year for the roll out of fifth generation wireless communication methodologies. The commercial vendors have characterized 5G as a collection of disruptive set of technologies to provide high throughput, low latency communication supporting a variety of services, i.e., machine to machine communication to next generation base stations and vehicle-to-vehicle communication to radio-over-fiber and high mobility channels. High-speed train wireless communication channels as a subset of high mobility channels have their clear advantages and disadvantages considering other vehicular channels. The speed of high-speed trains is going to reach 500km/hr and with Hyperloop it may reach 1000km/hr. LTE …

Increased Span Length For The Mgs Long-Span Guardrail System Part Ii: Full-Scale Crash Testing, Dylan T. Meyer, John D. Reid, Karla A. Lechtenberg, Robert W. Bielenberg, Ronald K. Faller

Nebraska Department of Transportation: Research Reports

The objective of this research study was to design and evaluate the MGS long-span design for use with unsupported spans greater than 25 ft (7.6 m). Two full-scale crash tests were conducted to evaluate the MGS long-span system with increased span lengths and the use of UBSP posts adjacent to the long span. Both tests were conducted according to the TL- 3 criteria outlined in MASH. Both test nos. MGSLS-1 and MGSLS-2 were conducted with the 2270P vehicle impacting their respective critical impact points at a speed of 62 mph (100 km/h) and an angle of 25 degrees. Test no. …

Fabrication And Study Of The Structure And Magnetism Of Rare-Earth Free Nanoclusters, Bhaskar Das

Department of Physics and Astronomy: Dissertations, Theses, and Student Research

No abstract provided.

Who R U? Identity Theft And Unl Students, Marcia L. Dority Baker, Cheryl O'Dell

Information Technology Services: Publications

How can academic institutions help educate their students about the risks of identity theft? Or teach students to better understand how one’s online presence can hold so much joy and angst? For one campus, the University of Nebraska–Lincoln, the opportunity came from a middle school teacher engaging his students in a future problem-solving activity. UNL had the opportunity to create a 45-minute presentation on identity theft for local public school students who would be spending the day on campus researching this topic.

While preparing the presentation, we realized a top 10 list on identity theft for UNL students would be …