Engineering Commons^™

3d Printing Of Human Microbiome Constituents To Understand Spatial Relationships And Shape Parameters In Bacteriology, Jacques Izard, Teklu Kuru Gerbaba, Shara R. P. Yumul

Department of Food Science and Technology: Faculty Publications

Effective laboratory and classroom demonstration of microbiome size and shape, diversity, and ecological relationships is hampered by a lack of high-resolution, easy-to-use, readily accessible physical or digital models for use in teaching. Three-dimensional (3D) representations are, overall, more effective in communicating visuospatial information, allowing for a better understanding of concepts not directly observable with the unaided eye. Published morphology descriptions and microscopy images were used as the basis for designing 3D digital models, scaled at 20,000×, using computer-aided design software (CAD) and generating printed models of bacteria on mass-market 3D printers. Sixteen models are presented, including rod-shaped, spiral, flask-like, vibroid, …

On Road Coordinates For Autonomous Vehicle Guidance, Ricardo Jacome

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

A new roadmap framework is proposed to improve the guidance and trajectory prediction capabilities of connected and automated vehicles (CAVs). Independent of road shape determination through external sensors, the system serves as a backup for challenging conditions, such as low sensor visibility and adverse environmental effects (e.g., rain, fog, snow). Based on the fusion of vehicle dynamics principles, differential geometry, and road design standards, the roadmap framework provides a consolidated collection of critical reference points of roadway centerlines and information about the shape of the roadway in the vicinity of a vehicle, including curvature, optimal travel velocity, and road alignment …

Chilling And Heat Accumulation Of Fruit And Nut Trees And Flower Bud Vulnerability To Early Spring Low Temperatures In New Mexico: Meteorological Approach, Koffi Djaman, Komlan Koudahe, Murali Darapuneni, Suat Irkmak

Department of Mechanical and Materials Engineering: Faculty Publications

Fruit and nut trees production is an important activity across the southwest United States and this production is greatly impacted by the local climate. Temperature is the main environmental factor influencing the growth and the productivity of the fruit and nut trees as it affects the trees’ physiology and the vulnerability of flower bud, flowers, and young fruit and nut to the low temperatures or spring frost. The objective of the present study is to estimate the chilling and heat accumulation of fruit and nut trees across New Mexico. Three study sites as Fabian Garcia, Los Lunas, and Farmington were …

Quasi-Static Nonlinear Seismic Assessment Of A Fourth Century A.D. Roman Aqueduct In Istanbul, Turkey, Semih Gonen, Ece Erdogmus, Engin Karaesmen, Erhan Karaesmen

Durham School of Architectural Engineering and Construction: Faculty Publications

The majority of architectural heritage consists of load-bearing masonry components made up of stone units and relatively weak mortar joints, yielding potential weak planes for masonry structures where tension and shear failures are expected to occur. Advanced nonlinear analyses are required to simulate these phenomena and predict the corresponding nonlinear structural behavior of historic masonry constructions. In this context, this paper presents a model of a stone masonry Roman aqueduct (the Valens Aqueduct), constructed in the fourth century A.D. in Istanbul, Turkey, to explore the seismic capacity and behavior using the discrete element method (DEM). The employed modeling approach comprises …

Determination Of Vadose Zone And Saturated Zone Nitrate Lag Times Using Long-Term Groundwater Monitoring Data And Statistical Machine Learning, Martin J. Wells, Troy E. Gilmore, Natalie Nelson, John K. Bohlke

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In this study, we explored the use of statistical machine learning and long-term groundwater nitrate monitoring data to estimate vadose zone and saturated zone lag times in an irrigated alluvial agricultural setting. Unlike most previous statistical machine learning studies that sought to predict groundwater nitrate concentrations within aquifers, the focus of this study was to leverage available groundwater nitrate concentrations and other environmental variables to determine mean regional vertical velocities (transport rates) of water and solutes in the vadose zone and saturated zone (3.50 and 3.75 m yr−1 , respectively). The statistical machine learning results are consistent with two primary …

Role Of Nadþ In Regulating Cellular And Metabolic Signaling Pathways, Sara Amjad, Sabah Nisar, Ajaz A. Bhat, Ab Rauf Shah, Michael P. Frenneaux, Khalid Fakhro, Mohammad Haris, Ravinder Reddy, Zoltan Patay, Joseph Baur, Puneet Bagga

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Background: Nicotinamide adenine dinucleotide (NAD⁺), a critical coenzyme present in every living cell, is involved in a myriad of metabolic processes associated with cellular bioenergetics. For this reason, NAD⁺ is often studied in the context of aging, cancer, and neurodegenerative and metabolic disorders.

Scope of review: Cellular NAD⁺ depletion is associated with compromised adaptive cellular stress responses, impaired neuronal plasticity, impaired DNA repair, and cellular senescence. Increasing evidence has shown the efficacy of boosting NAD⁺ levels using NAD⁺ precursors in various diseases. This review provides a comprehensive understanding into the role of NAD^{+ …}

Exploring The Efficiency Of Self-Organizing Software Teams With Game Theory, Clay Stevens, Jared Soundy, Hau Chan

School of Computing: Conference and Workshop Papers

Over the last two decades, software development has moved away from centralized, plan-based management toward agile methodologies such as Scrum. Agile methodologies are founded on a shared set of core principles, including self-organizing software development teams. Such teams are promoted as a way to increase both developer productivity and team morale, which is echoed by academic research. However, recent works on agile neglect to consider strategic behavior among developers, particularly during task assignment–one of the primary functions of a self-organizing team. This paper argues that self-organizing software teams could be readily modeled using game theory, providing insight into how agile …

Historical Contingency In Microbial Resilience To Hydrologic Perturbations, Hyun-Seob Song, James C. Stegen, Emily B. Graham, Timothy D. Scheibe

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Development of reliable biogeochemical models requires a mechanistic consideration of microbial interactions with hydrology. Microbial response to and its recovery after hydrologic perturbations (i.e., resilience) is a critical component to understand in this regard, but generally difficult to predict because the impacts of future events can be dependent on the history of perturbations (i.e., historical contingency). Fundamental issues underlying this phenomenon include how microbial resilience to hydrologic perturbations is influenced by historical contingency and how their relationships vary depending on the characteristics of microbial functions. To answer these questions, we considered a simple microbial community composed of two species that …

Modeling The Release And Spreading Of Permanganate From Aerated Slow-Release Oxidants In A Laboratory Flow Tank, Ann Kambhu, Yusong Li, Troy E. Gilmore, Steve D. Comfort

School of Natural Resources: Faculty Publications

Aerated, slow-release oxidants are a relatively new technology for treating contaminated aquifers. A critical need for advancing this technology is developing a reliable method for predicting the radius of influence (ROI) around each drive point. In this work, we report a series of laboratory flow tank experiments and numerical modeling efforts designed to predict the release and spreading of permanganate from aerated oxidant candles (oxidant-wax composites). To mimic the design of the oxidant delivery system used in the field, a double screen was used in a series of flow tank experiments where the oxidant was placed inside the inner screen …

Characterization Of The Strain-Rate–Dependent Mechanical Response Of Single Cell–Cell Junctions, Amir Monemian Esfahani, Jordan Rosenbohm, Bahareh Tajvidi Safa, Nickolay V. Lavrik, Grayson Minnick, Quan Zhou, Fang Kong, Xiaowei Jin, Eunju Kim, Ying Liu, Yongfeng Lu, Jung Yul Lim, James K. Wahl Iii, Ming Dao, Changjin Huang, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

Cell–cell adhesions are often subjected to mechanical strains of different rates and magnitudes in normal tissue function. However, the rate-dependent mechanical behavior of individual cell– cell adhesions has not been fully characterized due to the lack of proper experimental techniques and therefore remains elusive. This is particularly true under large strain conditions, which may potentially lead to cell–cell adhesion dissociation and ultimately tissue fracture. In this study, we designed and fabricated a single-cell adhesion micro tensile tester (SCAμTT) using twophoton polymerization and performed displacement-controlled tensile tests of individual pairs of adherent epithelial cells with a mature cell–cell adhesion. Straining the …

Irrigation Management In Potato (Solanum Tuberosum L.) Production: A Review, Koffi Djaman, Suat Irkmak, Komlan Koudahe, Samuel Allen

Department of Mechanical and Materials Engineering: Faculty Publications

Limited water resources coupled with the increase of the human population calls for more efficient use of water in irrigated agriculture. Potato (Solanum tuberosum L.) is one of the most widely grown crops worldwide and is very sensitive to water stress due to its shallow rooting system. With the dilemma of potato sensitivity to drought and limited available water resources restricting crop production, researchers and crop growers have been investigating different approaches for optimizing potato yield and improving crop water use efficiency under different irrigation methods. While potato response to water is affected by other management practices such as fertilizer …

Ultrasonic Mapping Of Hybrid Additively Manufactured 420 Stainless Steel, Luz D. Sotelo, Haitham Hadidi, Cody S. Pratt, Michael P. Sealy, Joseph A. Turner

Department of Mechanical and Materials Engineering: Faculty Publications

Metal hybrid additive manufacturing (AM) processes are suitable to create complex structures that advance engineering performance. Hybrid AM can be used to create functionally graded materials for which the variation in microstructure and material properties across the domain is created through a synergized combination of fully coupled manufacturing processes and/or energy sources. This expansion in the engineering design and manufacturing spaces presents challenges for nondestructive evaluation, including the assessment of the sensitivity of nondestructive measurements to functional gradients. To address this problem, linear ultrasound measurements are used to interrogate 420 stainless steel coupons from three manufacturing methods: wrought, AM, and …

Plasmonic Waveguides To Enhance Quantum Electrodynamic Phenomena At The Nanoscale, Ying Li, Christos Argyropoulos

Department of Electrical and Computer Engineering: Faculty Publications

The emerging field of plasmonics can lead to enhanced light-matter interactions at extremely nanoscale regions. Plasmonic (metallic) devices promise to efficiently control both classical and quantum properties of light. Plasmonic waveguides are usually used to excite confined electromagnetic modes at the nanoscale that can strongly interact with matter. The analysis of these nanowaveguides exhibits similarities with their low frequency microwave counterparts. In this article, we review ways to study plasmonic nanostructures coupled to quantum optical emitters from a classical electromagnetic perspective. These quantum emitters are mainly used to generate single-photon quantum light that can be employed as a quantum bit …

Anisotropic Dielectric Functions, Band-To-Band Transitions, And Critical Points In Α-Ga2O3, Matthew J. Hilfiker, Rafal Korlacki, Riena Jinno, Yongjin Cho, Huili Grace Xing, Debdeep Jena, Ufuk Kilic, Megan Stokey, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

We use a combined generalized spectroscopic ellipsometry and density functional theory approach to determine and analyze the anisotropic dielectric functions of an α-Ga₂O₃ thin film. The sample is grown epitaxially by plasma-assisted molecular beam epitaxy on m-plane sapphire. Generalized spectroscopic ellipsometry data from multiple sample azimuths in the spectral range from 0.73 eV to 8.75 eV are simultaneously analyzed. Density functional theory is used to calculate the valence and conduction band structure. We identify, for the indirect-bandgap material, two direct band-to-band transitions with M₀-type van Hove singularities for polarization perpendicular to the c axis, …

Unveiling Precipitation Behavior In Mg-Y Based Alloys, Qingchun Zhu, Yangxin Li, Zhigang Ding, Jian Wang, Yuxuan Liu, Huan Zhang, Tian Xie, Mingxu Wang, Hong Zhu, Tao Ying, Wei Liu, Xiaoquin Zeng

Department of Mechanical and Materials Engineering: Faculty Publications

Mg-Y based alloys exhibit a promising combination of strength and deformability through tuning precipitation and solute strengthening mechanisms and tailoring the activity of non-basal dislocations. Understanding the precipitation sequence of Mg-Y based alloys and its dependence on Yttrium concentration in the matrix will provide a guideline for fine tuning structure, morphology and distribution of precipitates in Mg-Y based alloys. In this paper, we explore the precipitation behaviors of Mg-11Y (wt%) and Mg-11Y-1Al (wt%) alloys using aberration-corrected scanning transmission electron microscopy, and rationalize the experimental observations based on first-principles density functional theory calculations. The precipitation sequence during ageing at 225 °C …

Truck Platooning Effects On Girder Bridges, Joshua Steelman, Jay A. Puckett, Daniel Linzell, Bowen Yang

Nebraska Department of Transportation: Research Reports

Truck platooning – digitally linking two or more trucks to travel in a closely spaced convoy – is increasingly used to save fuel, and reduce driver work and road congestion. Currently, the platoon load effects with several constant headways on bridges have been evaluated and compared to AASHTO design and legal loads. However, reliability assessment and a more rigorous investigation of headway spacing assumptions for truck platoons are lacking. This research provides a framework for determining how much a platoon permit load might be increased given strict control over the load characteristics and operational tactics. The present research evaluates the …

Laser Vibrational Excitation Of Radicals To Prevent Crystallinity Degradation Caused By Boron Doping In Diamond, L Fan, L Constantin, Z P. Wu, K A. Mcelveen, X G. Chen, F Wang, C Debiemme-Chouvy, B Cui, R Y. Lai, X Li, J F. Silvain, Y F. Lu

Department of Electrical and Computer Engineering: Faculty Publications

Pursuing high-level doping without deteriorating crystallinity is prohibitively difficult but scientifically crucial to unleashing the hidden power of materials. This study demonstrates an effective route for maintaining lattice integrity during the combustion chemical vapor deposition of highly conductive boron-doped diamonds (BDDs) through laser vibrational excitation of a growth-critical radical, boron dihydride (BH₂). The improved diamond crystallinity is attributed to a laser-enabled, thermal nonequilibrium suppression of the relative abundance of boron hydrides (BH), whose excessive presence induces boron segregation and disturbs the crystallization. The BDDs show a boron concentration of 4.3 × 10²¹ cm⁻³, a film …

The Role Of Microenvironmental Cues And Mechanical Loading Milieus In Breast Cancer Cell Progression And Metastasis, Brandon D. Riehl, Eunju Kim, Tasneem Bouzid, Jung Yul Lim

Department of Mechanical and Materials Engineering: Faculty Publications

Cancer can disrupt the microenvironments and mechanical homeostatic actions in multiple scales from large tissue modification to altered cellular signaling pathway in mechanotransduction. In this review, we highlight recent progresses in breast cancer cell mechanobiology focusing on cell-microenvironment interaction and mechanical loading regulation of cells. First, the effects of microenvironmental cues on breast cancer cell progression and metastasis will be reviewed with respect to substrate stiffness, chemical/topographic substrate patterning, and 2D vs. 3D cultures. Then, the role of mechanical loading situations such as tensile stretch, compression, and flow-induced shear will be discussed in relation to breast cancer cell mechanobiology and …

Quantification Of Nitric Oxide Concentration Using Single-Walled Carbon Nanotube Sensors, Jakob Meier, Joseph Stapleton, Eric M. Hofferber, Abigail Haworth, Stephen D. Kachman, Nicole M. Iverson

Department of Mechanical and Materials Engineering: Faculty Publications

Nitric oxide (NO), a free radical present in biological systems, can have many detrimental effects on the body, from inflammation to cancer. Due to NO’s short half-life, detection and quantification is difficult. The inability to quantify NO has hindered researchers’ understanding of its impact in healthy and diseased conditions. Single-walled carbon nanotubes (SWNTs), when wrapped in a specific single-stranded DNA chain, becomes selective to NO, creating a fluorescence sensor. Unfortunately, the correlation between NO concentration and the SWNT’s fluorescence intensity has been difficult to determine due to an inability to immobilize the sensor without altering its properties. Through the use …

Mechanical Behavior Of Al–Al2cu–Si And Al–Al2cu Eutectic Alloys, Qian Lei, Jian Wang, Amitava Mitra

Department of Mechanical and Materials Engineering: Faculty Publications

In this study, laser rapid solidification technique was used to refine the microstructure of ternary Al–Cu–Si and binary Al–Cu eutectic alloys to nanoscales. Micropillar compression testing was performed to measure the stress–strain response of the samples with characteristic microstructure in the melt pool regions. The laser-remelted Al–Al₂Cu–Si ternary alloy was observed to reach the compressive strength of 1.59 GPa before failure at a strain of 28.5%, which is significantly better than the as-cast alloy with a maximum strength of 0.48 GPa at a failure strain of 4.8%. The laser-remelted Al–Cu binary alloy was observed to reach the compressive …

Sensitive X-Ray And Gamma-Ray Detectors Including Perovskite Single Crystals, Jinsong Huang, Haotong Wei

Department of Mechanical and Materials Engineering: Faculty Publications

Perovskite single crystal X-ray and gamma-ray radiation detector devices include an X-ray and gamma-ray wavelength responsive active layer including a perovskite single crystal. The perovskite single crystal is a perovskite single crystal having a structure of ABX₃ , wherein A is methyl ammonium ( CH₂NH₂+), C_S+, formamidinum ( H₂NCHNH₂+) , or Rb⁺ or a mixture thereof, B is Pb²⁺ which can be partially or completely replaced by other ions including Bi³⁺, Sb³⁺, Sn²⁺ or a mixture thereof, and X is a halide …

Feasibility Of Lora For Smart Home Indoor Localization, Kyungki Kim, Sining Li, Milad Heydariaan, Nour Smaoui, Omprakash Gnawali, Wonho Suh, Min Jae Suh, Jung In Kim

Durham School of Architectural Engineering and Construction: Faculty Publications

With the advancement of low-power and low-cost wireless technologies in the past few years, the Internet of Things (IoT) has been growing rapidly in numerous areas of Industry 4.0 and smart homes. With the development of many applications for the IoT, indoor localization, i.e., the capability to determine the physical location of people or devices, has become an important component of smart homes. Various wireless technologies have been used for indoor localization includingWiFi, ultra-wideband (UWB), Bluetooth low energy (BLE), radio-frequency identification (RFID), and LoRa. The ability of low-cost long range (LoRa) radios for low-power and long-range communication has made this …

Moving Beyond ‘More Crop Per Drop’: Insights From Two Decades Of Research On Agricultural Water Productivity, Meredith Giordano, Susanne M. Scheierling, David O. Tréguer, Hugh Turral, Peter G. Mccornick

Daugherty Water for Food Global Institute: Faculty Publications

Concern over increasing water scarcity has led to the introduction of the concept of agricultural water productivity and an emphasis on interventions to achieve ‘more crop per drop’. Yet, a strong debate continues on how the concept is to be defined and used. Drawing largely from the irrigation literature, the origins of the concept and its methodological developments are reviewed, and its use in applied work over two decades is discussed. Based on this analysis of conceptual and applied research, key insights into the concept’s contributions and limitations are presented, as well as opportunities for further refinements.

Surface Acoustic Waves Increase Magnetic Domain Wall Velocity, Anil Adhikari, Shireen Adenwalla

Shireen Adenwalla Papers

Domain walls in magnetic thin films are being explored for memory applications and the speed at which they move has acquired increasing importance. Magnetic fields and currents have been shown to drive domain walls with speeds exceeding 500 m/s. We investigate another approach to increase domain wall velocities, using high frequency surface acoustic waves to create standing strain waves in a 3 micron wide strip of magnetic film with perpendicular anisotropy. Our measurements, at a resonant frequency of 248.8 MHz, indicate that domain wall velocities increase substantially, even at relatively low applied voltages. Our findings suggest that the strain wave …

Nebraska Summary: S1150a Fendt 1050, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 1218s: Fendt 724 Vario Gen6, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Use Of Energy Consumption During Milling To Fill A Measurement Gap In Hybrid Additive Manufacturing, K. L. M. Avegnon, P. Noll, M. R. Uddin, G. Madireddy, R. Williams, A. Achuthan, M. P. Sealy

Department of Mechanical and Materials Engineering: Faculty Publications

Coupling additive manufacturing (AM) with interlayer peening introduces bulk anisotropic properties within a build across several centimeters. Current methods to map high resolution anisotropy and heterogeneity are either destructive or have a limited penetration depth using a nondestructive method. An alternative pseudo-nondestructive method to map high-resolution anisotropy and heterogeneity is through energy consumption during milling. Previous research has shown energy consumption during milling correlates with surface integrity. Since surface milling of additively manufactured parts is often required for post-processing to improve dimensional accuracy, an opportunity is available to use surface milling as an alternative method to measure mechanical properties and …

A 3d Point Cloud Deep Learning Approach Using Lidar To Identify Ancient Maya Archaeological Sites, Heather Richards-Rissetto, David Newton, Aziza Al Zadjali

Department of Anthropology: Faculty Publications

Airborne light detection and ranging (LIDAR) systems allow archaeologists to capture 3D data of anthropogenic landscapes with a level of precision that permits the identification of archaeological sites in difficult to reach and inaccessible regions. These benefits have come with a deluge of LIDAR data that requires significant and costly manual labor to interpret and analyze. In order to address this challenge, researchers have explored the use of state-of-the-art automated object recognition algorithms from the field of deep learning with success. This previous research, however, has been limited to the exploration of deep learning processes that work with only 2D …

Test 2235: John Deere 8rt 340, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Co2 Biocapture By Scenedesmus Sp. Grown In Industrial Wastewater, Itzel Y. López-Pacheco, Eduardo Israel Castillo-Vacas, Lizbeth Castañeda-Hernández, Angie Gradiz-Menjivar, Laura Isabel Rodas-Zuluaga, Carlos Castillo-Zacarías, Juan Eduardo Sosa-Hernández, Damià Barceló, Hafiz M.N. Iqbal, Roberto Parra-Saldívar

Panhandle Research and Extension Center

Greenhouse gases (GHG) emissions are widely related to climate change, triggering several environmental problems of global concern and producing environmental, social, and economic negative impacts. Therefore, global research seeks to mitigate greenhouse gas emissions. On the other hand, the use of wastes under a circular economy scheme generates subproducts from the range of high to medium-value, representing away to help sustainable development. Therefore, the use of wastewater as a culture medium to grow microalgae strains that biocapture environmental CO₂, is a proposal with high potential to reduce the GHG presence in the environment. In this work, Scenedesmus sp. …