Engineering Commons^™

Experimental Study Of Blast Resistant Glazing System Response To Explosive Loading, William Chad Wedding

University of Kentucky Master's Theses

This thesis recounts the experimental study of the dynamic response of a blast resistant glazing system to explosive loading. A combination of triaxial force sensors, pressure gauges, and laser displacement gauges capture the response in detail over a wide range of scenarios. The scenarios include low level blast loading to characterize the reaction at points around the perimeter of the window, moderate level blast loading to examine the repeatability of the blast scenario, and high level blast loading to capture the response during failure as the tensile membrane forms. The scenarios are modeled via an analytical Single-Degree-of-Freedom model as well …

Transitional Flow Prediction Of A Compressor Airfoil, Vivek Hariharan

University of Kentucky Master's Theses

The steady flow aerodynamics of a cascade of compressor airfoils is computed using a two-dimensional thin layer Navier-Stokes flow solver. The Dhawan and Narasimha transition model and Mayle‟s transition length model were implemented in this flow solver so that transition from laminar to turbulent flow could be included in the computations. A method to speed up the convergence of the fully turbulent calculations has been introduced. In addition, the effect of turbulence production formulations and including streamline curvature correction in the Spalart-Allmaras turbulence model on the transition calculations is studied. These transitional calculations are correlated with the low and high …

Hydraulic Geometry Relationships And Regional Curves For The Inner And Outer Bluegrass Regions Of Kentucky, Ruth Roseann Brockman

University of Kentucky Master's Theses

Hydraulic geometry relationships and regional curves are used in natural channel design to assist engineers, biologists, and fluvial geomorphologists in the efforts undertaken to ameliorate previous activities that have diminished, impaired or destroyed the structure and function of stream systems. Bankfull channel characteristics were assessed for 14 United States Geological Survey (USGS) gaged sites in the Inner Bluegrass and 15 USGS gaged sites in the Outer Bluegrass Regions of Kentucky. Hydraulic geometry relationships and regional curves were developed for the aforementioned regions.

Analysis of the regression relationships showed that bankfull discharge is a good explanatory variable for bankfull parameters such …

Characterization Of Poly(Methyl Methacrylate Based Nanocomposites Enhanced With Carbon Nanotubes, Andrew Jonathan Placido

University of Kentucky Master's Theses

The viscoelastic relaxation dynamics of a series of poly(methyl methacrylate) [PMMA] based nanocomposites filled with carbon nanotubes have been studied using dynamic mechanical analysis and broadband dielectric spectroscopy. The networks were prepared using four methods: (i) melt mixing, (ii) solution processing, (iii) in-situ polymerization, and (iv) polymer grafting. Nanotube modifications included surface oxidation via acid exposure and surface functionalization for polymer grafting. The effect of variations in processing method and nanotube modification on glass transition temperature (T_g) and relaxation dynamics was investigated. The relaxation behavior of the nanocomposites was sensitive to processing method and nanotube functionalization. Nanotube loading …

Detection Of Roof Boundaries Using Lidar Data And Aerial Photography, Andrew David Gombos

University of Kentucky Master's Theses

The recent growth in inexpensive laser scanning sensors has created entire fields of research aimed at processing this data. One application is determining the polygonal boundaries of roofs, as seen from an overhead view. The resulting building outlines have many commercial as well as military applications. My work in this area has created a segmentation algorithm where the descriptive features are computationally and theoretically simpler than previous methods. A support vector machine is used to segment data points using these features, and their use is not common for roof detection to date. Despite the simplicity of the feature calculations, the …

The Relationship Between Information Technology And Construction Productivity, Dong Zhai

University of Kentucky Doctoral Dissertations

Over the past decades, information technology has been impacting industries, economics, the way of life and even the culture throughout the world. Productivity has been attracting much attention as an important indicator of economics, and numerous researchers have investigated the relationship between information technology and productivity. Construction is one of the largest industries in the United States, but little research has been conducted to investigate the relationship between information technology and construction productivity.

The major objective of this dissertation is to determine the degree (if any) to which information technology usage, specifically the use of information technology to automate and …

Effect Of Fluorination On Partitioning Behavior And Bilayer Self Assembly, Vivian Aramide Ojogun

University of Kentucky Doctoral Dissertations

Fluorinated systems are defined by unique properties that offer advantages in drug delivery, material synthesis and industrial applications. In comparison to their hydrocarbon counterparts, the design of fluorinated solutes for tailored applications is limited by the inability to predict the effect of fluorination on phase behavior. This work examines and interprets the influence of fluorination on the phase behavior of fluorinated solutes and surfactants, with emphasis on their impact on vesicle bilayers.

Thermodynamic partitioning of functionalized series of fluorinated and hydrocarbon nicotinate prodrugs fashioned to promote solubility in a fluorocarbon solvent (perfluorooctyl bromide; PFOB) is measured. Predictive approaches are also …

Integration Of The Regression-Based Land Use Model And The Combined Trip Distribution-Assignment Transportation Model, Meiwu An

University of Kentucky Doctoral Dissertations

Regional growth caused the emergence of traffic congestion and pollution in the past few decades, which have started to affect small urban areas. These problems are not only related to transportation system design but also to land use planning. There has been growing recognition that the relationship between land use and transportation needs to be understood and analyzed in a consistent and systematic way. Integrated urban models have recently been introduced and implemented in several metropolitan areas to systematically examine the relationship between land use and transportation. The general consensus in the field of integrated urban models is that each …

Real-Time Model Predictive Control Of Quasi-Keyhole Pipe Welding, Kun Qian

University of Kentucky Doctoral Dissertations

Quasi-keyhole, including plasma keyhole and double-sided welding, is a novel approach proposed to operate the keyhole arc welding process. It can result in a high quality weld, but also raise higher demand of the operator. A computer control system to detect the keyhole and control the arc current can improve the performance of the welding process. To this effect, developing automatic pipe welding, instead of manual welding, is a hot research topic in the welding field.

The objective of this research is to design an automatic quasi-keyhole pipe welding system that can monitor the keyhole and control its establishment time …

Advancements In Transmission Line Fault Location, Ning Kang

University of Kentucky Doctoral Dissertations

In modern power transmission systems, the double-circuit line structure is increasingly adopted. However, due to the mutual coupling between the parallel lines it is quite challenging to design accurate fault location algorithms. Moreover, the widely used series compensator and its protective device introduce harmonics and non-linearities to the transmission lines, which make fault location more difficult. To tackle these problems, this dissertation is committed to developing advanced fault location methods for double-circuit and series-compensated transmission lines.

Algorithms utilizing sparse measurements for pinpointing the location of short-circuit faults on double-circuit lines are proposed. By decomposing the original network into three sequence …

Extraction And Prediction Of System Properties Using Variable-N-Gram Modeling And Compressive Hashing, Muthulakshmi Muthukumarasamy

University of Kentucky Doctoral Dissertations

In modern computer systems, memory accesses and power management are the two major performance limiting factors. Accesses to main memory are very slow when compared to operations within a processor chip. Hardware write buffers, caches, out-of-order execution, and prefetch logic, are commonly used to reduce the time spent waiting for main memory accesses. Compiler loop interchange and data layout transformations also can help. Unfortunately, large data structures often have access patterns for which none of the standard approaches are useful. Using smaller data structures can significantly improve performance by allowing the data to reside in higher levels of the memory …

Analysis And Optimization Of Electrical Systems In A Solar Car With Applications To Gato Del Sol Iii-Iv, Krishna Venkatesh Prayaga

University of Kentucky Master's Theses

Gato del Sol III, was powered by a solar array of 480 Silicon mono-crystalline photovoltaic cells. Maximum Power Point trackers efficiently made use of these cells and tracked the optimal load. The cells were mounted on a fiber glass and foam core composite shell. The shell rides on a lightweight aluminum space frame chassis, which is powered by a 95% efficient brushless DC motor. Gato del Sol IV was the University of Kentucky Solar Car Team’s (UKSCT) entry into the American Solar Car Challenge (ASC) 2010 event. The car makes use of 310 high density lithium-polymer batteries to account for …

Energy Reduction In Automotive Paint Shops A Review Of Hybrid/Electric Vehicle Battery Manufacturing, Claudia Patricia Arenas Guerrero

University of Kentucky Master's Theses

Automotive industry is facing fundamental challenges due to the rapid depletion of fossil fuels, energy saving and environmental concerns. The need of sustainable energy development has motivated the research of energy reduction and renewable energy sources. Efficient use of energy in vehicle manufacturing is demanded, as well as an alternative energy source to replace gasoline powered engines. In this thesis, we introduce a case study at an automotive paint shop, where the largest amount of energy consumption of an automotive assembly plant takes place. Additionally, we present a summary of recent advances in the area of hybrid and electrical vehicles …

Performance Analysis Of Srcp Image Based Sound Source Detection Algorithms, Praveen Reddy Nalavolu

University of Kentucky Master's Theses

Steered Response Power based algorithms are widely used for finding sound source location using microphone array systems. SRCP-PHAT is one such algorithm that has a robust performance under noisy and reverberant conditions. The algorithm creates a likelihood function over the field of view. This thesis employs image processing methods on SRCP-PHAT images, to exploit the difference in power levels and pixel patterns to discriminate between sound source and background pixels. Hough Transform based ellipse detection is used to identify the sound source locations by finding the centers of elliptical edge pixel regions typical of source patterns. Monte Carlo simulations of …

Theoretical Modeling And Analysis Of Ammonia Gas Sensing Properties Of Vertically Aligned Multiwalled Carbon Nanotube Resistive Sensors And Enhancing Their Sensitivity, Shripriya Darshini Poduri

University of Kentucky Master's Theses

Vertically aligned Multiwalled Carbon Nanotubes (MWCNTs) were grown in the pores of Anodized Aluminum Oxide (AAO) templates and investigated for resistive sensor applications. High Sensitivity of 23% to low concentration (100 ppm) of ammonia was observed. An equivalent circuit model was developed to understand the current flow path in the resistive sensor. This helped us in achieving high sensitivities through amorphous carbon (a-C) layer thickness tailoring by employing post-growth processing techniques like plasma etching.

A simulation model in MATLAB was developed to calculate the device resistance and the change in the sensitivity as a function of device parameters. The steady …

Testing Program For Kysat‐1, Jason Robert Bratcher

University of Kentucky Master's Theses

Years of success in the aerospace industry has taught Kentucky Space several lessons. This thesis will summarize the accomplishments in an attempt to formulate a well-defined program for designing and testing small spacecraft in an environment with strict financial restraints. The motivation for producing this well-defined platform for testing small spacecraft arose when Kentucky Space became the liaison between NASA and its customers for the NanoRacks and CubeLab module program. Having a solid program for testing small spacecraft will allow future student programs to easily set standards for experiment payloads. Also by discussing obstacles for smaller programs such as restraints …

Verilog Design And Fpga Prototype Of A Nanocontroller System, Akshay Vummannagari

University of Kentucky Master's Theses

Many new fabrication technologies, from nanotechnology and MEMS to printed organic semiconductors, center on constructing arrays of large numbers of sensors, actuators, or other devices on a single substrate. The utility of such an array could be greatly enhanced if each device could be managed by a programmable controller and all of these controllers could coordinate their actions as a massively-parallel computer. Kentucky Architecture nanocontroller array with very low per controller circuit complexity can provide efficient control of nanotechnology devices.

This thesis provides a detailed description of the control hierarchy of a digital system needed to build "nanocontrollers" suitable for …

Gold Nanospheres And Gold Nanorods As Localized Surface Plasmon Resonance Sensors, Akil Mannan Matcheswala

University of Kentucky Master's Theses

A novel localized surface plasmon resonance (LSPR) sensor that differentiates between background refractive index changes and surface-binding of a target analyte (e.g. a target molecule, protein, or bacterium) is presented. Standard, single channel LSPR sensors cannot differentiate these two effects as their design allows only one mode to be coupled. This novel technique uses two surface plasmon modes to simultaneously measure surface binding and solution refractive index changes. This increases the sensitivity of the sensor.

Different channels or modes can be created in sensors with the introduction of gold nanospheres or gold nanorods that act as receptor mechanisms. Once immobilization …

Multiwall Carbon Nanotubes Alter The Thermal Profile And Antibiotic Elution Of Orthopaedic Bone Cement, Alison Carroll Tickle

University of Kentucky Master's Theses

Multiwall carbon nanotubes (MWNTs) have extraordinary mechanical and thermal transport properties. They significantly improve the static and dynamic mechanical properties of acrylic orthopaedic bone cement when added to the dry cement polymer powder. Understanding the role MWNTs play on bone cement polymerization temperatures will lead to improved mechanical integrity of the cement-bone interface in joint arthroplasties. It was determined through thermal testing that MWNTs increased the polymerization time of the methylmethacrylate by 45-460% and decreased the peak exothermic temperature of bone cement with and without antibiotics. The flow of heat produced during polymerizing cement was reduced 25-85% with the addition …

Issues Related To The Numerical Implementation Of A Sparse Method For The Solution Of Volume Integral Equations At Low Frequencies, Kiran Arcot

University of Kentucky Master's Theses

Computational electromagnetic modeling involves generating system matrices by discretizing integral equations and solving the resulting system of linear equations. Many methods of solving the system of linear equations exist and one such method is the factorization of the matrix using the so called local-global solution (LOGOS) modes. Computer codes to perform the discretization of the integral equations, filling of the matrix, and the subsequent LOGOS factorization have previously been developed by others. However, these codes are limited to complex double precision arithmetic only.

This thesis extends and expands the existing computer by creating a more general implementation that is able …

A Novel Message Routing Layer For The Communication Management Of Distributed Embedded Systems, Darren Jacob Brown

University of Kentucky Master's Theses

Fault tolerant and distributed embedded systems are research areas that have the interest of such entities as NASA, the Department of Defense, and various other government agencies, corporations, and universities. Taking a system and designing it to work in the presence of faults is appealing to these entities as it inherently increases the reliability of the deployed system. There are a few different fault tolerant techniques that can be implemented in a system design to handle faults as they occur. One such technique is the reconfiguration of a portion of the system to a redundant resource. This is a difficult …

Audio Scene Segementation Using A Microphone Array And Auditory Features, Harikrishnan Unnikrishnan

University of Kentucky Master's Theses

Auditory stream denotes the abstract effect a source creates in the mind of the listener. An auditory scene consists of many streams, which the listener uses to analyze and understand the environment. Computer analyses that attempt to mimic human analysis of a scene must first perform Audio Scene Segmentation (ASS). ASS find applications in surveillance, automatic speech recognition and human computer interfaces. Microphone arrays can be employed for extracting streams corresponding to spatially separated sources. However, when a source moves to a new location during a period of silence, such a system loses track of the source. This results in …

Accelerated Aging Of Mwcnt Filled Electrically Conductive Adhesives, Ashwanth Reddy Vangala

University of Kentucky Master's Theses

Electrically conductive adhesives (ECA) are discussed and studied with everincreasing interest as an environmentally friendly alternative to solder interconnection in microelectronics circuit packaging. They are used to attach surface mount devices (SMD), Integrated Circuits (IC) and Flip chips in electronic assembly. The use of ECAs brings some benefits like flexibility, mild processing conditions and process simplicity. Multi walled carbon nanotubes (MWCNT) are used instead of metal fillers because of their novel properties such as light weight, high aspect ratio, corrosion resistant, reduced processing temperature, lead free, good electrical conduction and mechanical strength.

The purpose of the present work is to …

Genetic Algorithm Controlled Common Subexpression Elimination For Spill-Free Register Allocation, Shashi Deepa Arcot

University of Kentucky Master's Theses

As code complexity increases, maxlive increases. This is especially true in the case of the Kentucky If-Then-Else architecture proposed for Nanocontrollers. To achieve low circuit complexity, computations are decomposed to bit-level operations, thus generating large blocks of code with complex dependence structures. Additionally, the Nanocontroller architecture allows for only a small number of single bit registers and no extra memory.

The assumption of an infinite number of registers made during code generation becomes a huge problem during register allocation because the small number of registers and no additional memory. The large basic blocks mean that maxlive almost always exceeds the …

Design And Development Of Structurally Feasible Antennas For Deployment On Inflatable Wings Of Small Unmanned Aerial Vehicles, Rohit Reddy Tammannagari

University of Kentucky Master's Theses

This study is focused on designing conformal antennas to be deployed with the inflatable wings for unmanned aerial vehicles (UAV). The main emphasis is on utilizing the structure of the wing to develop antennas for various frequency bands, while maintaining the wing’s aerodynamic performance. An antenna modeler and optimizer software called 4NEC2 and a program called WIRECODE were used to design and determine the characteristics of the antennas. The effect of flexibility of the inflatable wing on the antenna characteristics during flight is also evaluated.

Arsenite Oxidation By Pure Cultures Of Thiomonas Arsenivorans Strain B6 In Bioreactor Systems, Aniruddha Dastidar

University of Kentucky Doctoral Dissertations

The removal of arsenic toxicity from water is accomplished by a preliminary preoxidative step transforming the most toxic form, arsenite (As (III)), to the least toxic form, arsenate (As (V)). The potential of As (III) oxidation to As (V) was initially investigated in batch reactors using the chemoautotrophic Thiomonas arsenivorans strain b6 under varying initial As (III) and cell concentrations and at optimal pH and temperature conditions (pH 6.0 and temperature 30°C). The strain b6 completely oxidized As (III) to As (V) during exponential growth phase for lower levels of As (III) concentrations (≤ 100 mg/L) but continued into stationary …

Real-Time 3-D Reconstruction By Means Of Structured Light Illumination, Kai Liu

University of Kentucky Doctoral Dissertations

Structured light illumination (SLI) is the process of projecting a series of light striped patterns such that, when viewed at an angle, a digital camera can reconstruct a 3-D model of a target object's surface. But by relying on a series of time multiplexed patterns, SLI is not typically associated with video applications. For this purpose of acquiring 3-D video, a common SLI technique is to drive the projector/camera pair at very high frame rates such that any object's motion is small over the pattern set. But at these high frame rates, the speed at which the incoming video can …

A Continuous Mathematical Model Of The One-Dimensional Sedimentation Process Of Flocculated Sediment Particles, Sebastian Fernando Torrealba

University of Kentucky Doctoral Dissertations

A new continuous one-dimensional sedimentation model incorporating a new continuous flocculation model that considers aggregation and fragmentation processes was derived and tested. Additionally, a new procedure to model sediment particle size distribution (PSD) was derived. Basic to this development were three different parametric models: Jaky, Fredlund and the Gamma probability distribution (GPD) were chosen to fit three different glass micro-spheres PSDs having average particle sizes of 7, 25 and 35 microns. The GPD provided the best fit with the least parameters. The bimodal GPD was used to fit ten sediment samples with excellent results (< 5% average error). A continuous flocculation model was derived using the method of moments for solving the continuous Smoluchowski coagulation equation with fragmentation. The initial sediment PSD was modeled using a bimodal GPD. This new flocculation model resulted in a new general moments’ equation that considers aggregation and fragmentation processes, which is represented by a system of ordinary differential equations. The model was calibrated using a genetic algorithm with initial and flocculated PSDs of four sediment samples and four anionic polyacrylamides flocculants. The results show excellent correlation between predicted and observed values (R² > 0.9878). A new continuous …

Characterization Of Defects In Metal Sheets Via Infrared Thermography, Marc Anthony Harik

University of Kentucky Master's Theses

Defects in Aluminum, Stainless steel and galvanized steel sheets are studied in reflection mode infrared thermography. The effect of material properties, surface finish, heating intensity, heater emission spectra, pixel size and defect size are studied. Contrast is governed by heat quality, emissivity and defect geometry—which follows a logarithmic trend. The diameter detected via infrared thermography is found to be at least 30% larger than the measured diameter and sub-pixel defects can be detected. The use of gradient and Laplacian of temperature is introduced as a means of increasing defect contrast and mitigating heater variation.

Sustainable Resource Utilization In Manufacturing Of Printed Circuit Board Assembly: Exergy Analysis Of The Process, Subramaniam Saiganesh

University of Kentucky Master's Theses

Engineering for sustainable development requires prudent utilization of resources under economic, environmental and societal constraints. Resource utilization must follow a holistic approach. This brings in a need for comprehensive metrics which are simple, standard and universal. Thermodynamics may offer a metric that focuses on both quality and quantity of energy resources which may carry information to be combined with other metrics. This metric may be a thermodynamic property called exergy or available energy, which provides a better insight into resource use in both energy and non-energy producing systems. This thesis is devoted to a study of the exergy concept in …