Engineering Commons^™

A New Design Of Dc-Dc Converter For Capacitive Deionization Process, Zhiao Li

Theses and Dissertations--Electrical and Computer Engineering

The shortage of clean water has become a significant global problem, and capacitive deionization (CDI) is a technology that can be used to help relieve the problem. A Ćuk converter system that can recover energy from CDI cells is described. This converter transfers energy between two CDI cells when a cell is in its desorption period, allowing energy that would otherwise be lost to be recovered and improving overall system efficiency. In order to control the states of the MOSFET switches in the converter, a self boost charge pump is used. In this way, the microcontroller can control system duty …

A Multi-Physics Computational Approach To Simulating Thz Photoconductive Antennas With Comparison To Measured Data And Fabrication Of Samples, Darren Ray Boyd

Theses and Dissertations--Electrical and Computer Engineering

The frequency demands of radiating systems are moving into the terahertz band with potential applications that include sensing, imaging, and extremely broadband communication. One commonly used method for generating and detecting terahertz waves is to excite a voltage-biased photoconductive antenna with an extremely short laser pulse. The pulsed laser generates charge carriers in a photoconductive substrate which are swept onto the metallic antenna traces to produce an electric current that radiates or detects a terahertz band signal. Therefore, analysis of a photoconductive antenna requires simultaneous solutions of both semiconductor physics equations (including drift-diffusion and continuity relations) and Maxwell’s equations. A …

Coordinated Voltage And Reactive Power Control Of Power Distribution Systems With Distributed Generation, Esa A. Paaso

Theses and Dissertations--Electrical and Computer Engineering

Distribution system voltage and VAR control (VVC) is a technique that combines conservation voltage reduction and reactive power compensation to operate a distribution system at its optimal conditions. Coordinated VVC can provide major economic benefits for distribution utilities. Incorporating distributed generation (DG) to VVC can improve the system efficiency and reliability. The first part of this dissertation introduces a direct optimization formulation for VVC with DG. The control is formulated as a mixed integer non-linear programming (MINLP) problem. The formulation is based on a three-phase power flow with accurate component models. The VVC problem is solved with a state of …

Structure And Catalytic Properties Of Ultra-Small Ceria Nanoparticles, Xing Huang

Theses and Dissertations--Chemical and Materials Engineering

Cerium dioxide (ceria) is an excellent catalytic material due to its ability to both facilitate oxidation/reduction reactions as well as store/release oxygen as an oxygen buffer. The traditional approach to assess and improve ceria's catalytic behavior focuses on how efficiently O-vacancies can be generated and/or annihilated within the material, and how to extend established understandings of "bulk" ceria to further explain the greatly enhanced catalytic behavior of ultra-small ceria nanoparticles (uCNPs) with sizes less than 10 nm. Here, using density functional theory (DFT) calculations, we reexamine the atomic and electronic structures of uCNPs, especially their surface configurations. A unique picture …

Nanofiltration Membranes From Oriented Mesoporous Silica Thin Films, Mary K. Wooten

Theses and Dissertations--Chemical and Materials Engineering

The synthesis of mesoporous silica thin films using surfactant templating typically leads to an inaccessible pore orientation, making these films not suitable for membrane applications. Recent advances in thin film synthesis provide for the alignment of hexagonal pores in a direction orthogonal to the surface when templated on chemically neutral surfaces. In this work, orthogonal thin film silica membranes are synthesized on alumina supports using block copolymer poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (P123) as the template. The orthogonal pore structure is achieved by sandwiching membranes between two chemically neutral surfaces, resulting in 90 nm thick films. Solvent flux of ethanol through …

Influence Of Ferrite Phase In Alite-Calcium Sulfoaluminate Cements, Tristana Y. Duvallet

Theses and Dissertations--Chemical and Materials Engineering

Since the energy crisis in 1970’s, research on low energy cements with low CO₂-emissions has been increasing. Numerous solutions have been investigated, and the goal of this original research is to create a viable hybrid cement with the components of both Ordinary Portland cement (OPC) and calcium sulfoaluminate cement (CSAC), by forming a material that contains both alite and calcium sulfoaluminate clinker phases. Furthermore, this research focuses on keeping the cost of this material reasonable by reducing aluminum requirements through its substitution with iron. The aim of this work would produce a cement that can use large amounts …

Quartz Crystal Microbalance Investigation Of Cellulosome Activity From Clostridium Thermocellum On Model Cellulose Films, Shanshan Zhou

Theses and Dissertations--Chemical and Materials Engineering

The cost of deconstructing cellulose into soluble sugars is a key impediment to the commercial production of lignocellulosic biofuels. The use of the quartz crystal microbalance (QCM) to investigate reaction variables critical to enzymatic cellulose hydrolysis is investigated here, extending previous studies of fungal cellulase activity for the first time to whole cell cellulases. Specifically, the activity of the cellulases of Clostridium thermocellum, which are in the form of cellulosomes, was investigated. To clearly differentiate the activity of free cellulosome and cell-bound cellulosome, the distribution of free cellulosome and cell-bound cellulosome in crude cell broth at different growth stages …

The Development And Biocompatibility Of Low Temperature Co-Fired Ceramic (Ltcc) For Microfluidic And Biosensor Applications, Jin Luo

Theses and Dissertations--Chemical and Materials Engineering

Low temperature co-fired ceramic (LTCC) electronic packaging materials are applied for their electrical and mechanical properties, high reliability, chemical stability and ease of fabrication. Three dimensional features can also be prepared allowing integration of microfluidic channels and cavities inside LTCC modules. Mechanical, optical, electrical, microfluidic functions have been realized in single LTCC modules. For these reasons LTCC is attractive for biomedical microfluidics and Lab-on-a-Chip systems. However, commercial LTCC systems, optimized for microelectrics applications, have unknown cytocompatibility, and are not compatible with common surface functionalization chemistries.

The first goal of this work is to develop biocompatible LTCC materials for biomedical applications. …

Functionalized Membranes For Environmental Remediation And Selective Separation, Li Xiao

Theses and Dissertations--Chemical and Materials Engineering

Membrane process including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) have provided numerous successful applications ranging from drinking water purification, wastewater treatment, to material recovery. The addition of functional moiety in the membranes pores allows such membranes to be used in challenging areas including tunable separations, toxic metal capture, and catalysis. In this work, polyvinylidene fluoride (PVDF) MF membrane was functionalized with temperature responsive (poly(N-isopropylacrylamide), PNIPAAm) and pH responsive (polyacrylic acid, PAA) polymers. It’s revealed that the permeation of various molecules (water, salt and dextran) through the membrane can be thermally or pH controlled. The introduction of …

Nanometer-Scale Membrane Electrode Systems For Active Protein Separation, Enzyme Immobilization And Cellular Electroporation, Zhiqiang Chen

Theses and Dissertations--Chemical and Materials Engineering

Automated and continuous processes are the future trends in downstream protein purification. A functionalized nanometer-scale membrane electrode system, mimicking the function of cell wall transporters, can selectively capture genetically modified proteins and subsequently pump them through the system under programmed voltage pulses. Numerical study of the two-step pulse pumping cycles coupled with experimental His-GFP releasing study reveals the optimal 14s/1s pumping/repel pulse pumping condition at 10 mM bulk imidazole concentration in the permeate side. A separation factor for GFP: BSA of 9.7 was achieved with observed GFP electrophoretic mobility of 3.1×10^-6 cm² s^-1 V^-1 at 10 …

Cnt Membrane Platforms For Transdermal Drug Delivery And Aptamer Modulated Transport, Tao Chen

Theses and Dissertations--Chemical and Materials Engineering

CNT membrane platforms are biomimetic polymeric membranes imbedded with carbon nanotubes which show fast fluid flow, electric conductivity, and the ability to be grafted with chemistry. A novel micro-dialysis probe nicotine concentration sampling technique was proposed and proved in vitro, which could greatly improve the efficiency and accuracy of future animal transdermal studies. To enhance the scope of transdermal drug delivery which was limited to passive diffusion of small, potent lipophilic drugs, a wire mesh lateral electroporation design was also proposed which could periodically disrupt the skin barrier and enhance drug flux.

It was shown that AMP binding aptamer …

Magnesium-Titanium Alloys For Biomedical Applications, Ilona Hoffmann

Theses and Dissertations--Chemical and Materials Engineering

Magnesium has been identified as a promising biodegradable implant material because it does not cause systemic toxicity and can reduce stress shielding. However, it corrodes too quickly in the body. Titanium, which is already used ubiquitously for implants, was chosen as the alloying element because of its proven biocompatibility and corrosion resistance in physiological environments. Thus, alloying magnesium with titanium is expected to improve the corrosion resistance of magnesium.

Mg-Ti alloys with a titanium content ranging from 5 to 35 at.-% were successfully synthesized by mechanical alloying. Spark plasma sintering was identified as a processing route to consolidate the alloy …

Iron And Iron Oxide Functionalized Membranes With Applications To Selected Chloro-Organic And Metal Removal From Water, Minghui Gui

Theses and Dissertations--Chemical and Materials Engineering

The development of functionalized membranes with tunable pores and catalytic properties provides us an opportunity to manipulate the membrane pore structure, selectivity and reactivity. By introducing the functional groups into membrane pores, dissolved metal ions and reactive particles can be effectively immobilized within the polymer matrix for toxic chloro-organic and heavy metal remediation in water.

A polyelectrolyte functionalized membrane platform with tunable pore size and ion exchange capacity has been developed for iron/iron oxide nano-catalyst synthesis and chlorinated organic compound (trichloroethylene, TCE and polychlorinated biphenyls, PCBs) degradation. Highly robust polyvinylidene fluoride (PVDF) microfiltration membranes are used as the support with …

Layer-By-Layer Assemblies For Membrane-Based Enzymatic Catalysis, Andrew R. Tomaino

Theses and Dissertations--Chemical and Materials Engineering

While considerable progress has been made towards understanding the effect that membrane-based layer-by-layer (LbL) immobilizations have on the activity and stability of enzymatic catalysis, detailed work is required in order to fundamentally quantify and optimize the functionalization and operating conditions that define these properties. This work aims to probe deeper into the nature of transport mechanisms by use of pressure-induced, flow-driven enzymatic catalysis of LbL-functionalized hydrophilized poly(vinyldiene) (PVDF)-poly(acrylic acid) (PAA)-poly(allylamine hydrochloride) (PAH)-glucose oxidase (GOx) membranes. These membranes were coupled in a sealed series following cellulose acetate (CA) membranes for the elimination of product accumulation within the feed-side solution during operation. …

Generation Of Multicomponent Polymer Blend Microparticles Using Droplet Evaporation Technique And Modeling Evaporation Of Binary Droplet Containing Non-Volatile Solute, Venkat N. Rajagopalan

Theses and Dissertations--Chemical and Materials Engineering

Recently, considerable attention has been focused on the generation of nano- and micrometer scale multicomponent polymer particles with specifically tailored mechanical, electrical and optical properties. As only a few polymer-polymer pairs are miscible, the set of multicomponent polymer systems achievable by conventional methods, such as melt blending, is severely limited in property ranges. Therefore, researchers have been evaluating synthesis methods that can arbitrarily blend immiscible solvent pairs, thus expanding the range of properties that are practical. The generation of blended microparticles by evaporating a co-solvent from aerosol droplets containing two dissolved immiscible polymers in solution seems likely to exhibit a …

Microstructure And Work Function Of Dispenser Cathode Coatings: Effects On Thermionic Emission, Phillip D. Swartzentruber

Theses and Dissertations--Chemical and Materials Engineering

Dispenser cathodes emit electrons through thermionic emission and are a critical component of space-based and telecommunication devices. The emission of electrons is enhanced when coated with a refractory metal such as osmium (Os), osmium-ruthenium (Os-Ru), or iridium (Ir). In this work the microstructure, thermionic emission, and work function of thin film Os-Ru coatings were studied in order to relate microstructural properties and thermionic emission.

Os-Ru thin film coatings were prepared through magnetron sputtering and substrate biasing to produce films with an array of preferred orientations, or texture. The effect of texture on thermionic emission was studied in detail through closely-spaced …

A Multidisciplinary Techno-Economic Decision Support Tool For Validating Long-Term Economic Viability Of Biorefining Processes, Sumesh Sukumara

Theses and Dissertations--Chemical and Materials Engineering

Increasing demand for energy and transportation fuel has motivated researchers all around the world to explore alternatives for a long-term sustainable source of energy. Biomass is one such renewable resource that can be converted into various marketable products by the process of biorefining. Currently, research is taking strides in developing conversion techniques for producing biofuels from multiple bio-based feedstocks. However, the greatest concern with emerging processes is the long-term viability as a sustainable source of energy. Hence, a framework is required that can incorporate novel and existing processes to validate their economic, environmental and social potential in satisfying present energy …

Thermo-Chemical Conversion Of Coal-Biomass Blends: Kinetics Modeling Of Pyrolysis, Moving Bed Gasification And Stable Carbon Isotope Analysis, Abhijit Bhagavatula

Theses and Dissertations--Chemical and Materials Engineering

The past few years have seen an upsurge in the use of renewable biomass as a source of energy due to growing concerns over greenhouse gas emissions caused by the combustion of fossil fuels and the need for energy independence due to depleting fossil fuel resources. Although coal will continue to be a major source of energy for many years, there is still great interest in replacing part of the coal used in energy generation with renewable biomass. Combustion converts inherent chemical energy of carbonaceous feedstock to only thermal energy. On the other hand, partial oxidation processes like gasification convert …

Addressing Public Health Risks Of Persistent Pollutants Through Nutritional Modulation And Biomimetic Nanocomposite Remediation Platforms, Bradley J. Newsome

Theses and Dissertations--Chemistry

Due to their relative chemical stability and ubiquity in the environment, chlorinated organic contaminants such as polychlorinated biphenyls (PCBs) pose significant health risks and enduring remediation challenges. Engineered nanoparticles (NPs) provide a novel platform for sensing/remediation of these toxicants, in addition to the growing use of NPs in many industrial and biomedical applications, but there remains concern for their potential long-term health effects. Research highlighted herein also represents a transdisciplinary approach to address human health challenges associated with exposure to PCBs and NPs. The objectives of this dissertation research are two-fold, 1) to develop effective methods for capture/sensing and remediation …

Pavement Evaluation Of The Concrete Tie-Bars And Dowel Baskets On Irvin Cobb Drive, Us 60, Mccracken County, Ky, Brad W. Rister, Jamie Creech, Joe Whelan, Timothy R. B. Taylor

Kentucky Transportation Center Research Report

A 1500 Mhz. ground coupled, ground penetrating radar antenna was used to identify both the horizontal alignment and the vertical displacement of the concrete tie-bars and the transverse joint dowel bar assembles on a Portland-Cement-Concrete-Pavement (PCCP) on US 60 in McCracken County, KY. Approximately 5 lanes miles of PCCP were evaluated using the 1500 Mhz. ground coupled antenna. Results indicate that only one transverse dowel basket out of an approximate total of 1,760 were within 4.17 inches of the pavement surface. Seven transverse dowel baskets were misaligned four inches or greater from the location of the sawed joint. These areas …

Broadcasting With Prediction And Selective Forwarding In Vehicular Networks, Jainjun Yang, Zongming Fei

Computer Science Faculty Publications

Broadcasting in vehicular networks has attracted great interest in research community and industry. Broadcasting on disseminating information to individual vehicle beyond the transmission range is based on inter-vehicle communication systems. It is crucial to broadcast messages to other vehicles as fast as possible because the messages in vehicle communication systems are often emergency messages such as accident warning or alarm. In many current approaches, the message initiator or sender selects the node among its neighbors that is farthest away from it in the broadcasting direction and then assigns the node to rebroadcast the message once the node gets out of …

The Future Of Transit In West Virginia, Diana Long, Benjamin L. Blandford, Peter J. Dailey, Sinaya Dayan, Justin Matthews, Kent Sowards

Reports with Contribution from KTC Researchers

No abstract provided.

Fiscal Year 2013 Fhwa-536 Report For The Kentucky Transportation Cabinet, Steven Douglas Kreis, Candice Y. Wallace, Bryan Gibson, Sarah M. Mccormack

Kentucky Transportation Center Research Report

The Federal Highway Administration (FHWA) requires state transportation agencies to submit a biennial report on local highway finances. The purpose of these reports is to provide FHWA with the data it needs to capture the financing of highway activities at the local level. Based on this information, it can identify trends in revenue, expenditures, investments, and program development, and in turn make decisions about future investments. The report, FHWA-536, asks agencies to report on four areas of local highway finance: 1) disposition of highway-user revenues; 2) revenues used for roads and streets identified by source and funding type; 3) road …

Dopaminergic Modulation Of Memory And Affective Processing In Parkinson Depression, Lee X. Blonder, John T. Slevin, Richard J. Kryscio, Catherine A. Martin, Anders H. Andersen, Charles D Smith, Frederick A. Schmitt

Magnetic Resonance Imaging and Spectroscopy Center Faculty Publications

Depression is common in Parkinson's disease and is associated with cognitive impairment. Dopaminergic medications are effective in treating the motor symptoms of Parkinson's disease; however, little is known regarding the effects of dopaminergic pharmacotherapy on cognitive function in depressed Parkinson patients. This study examines the neuropsychological effects of dopaminergic pharmacotherapy in Parkinsonian depression. We compared cognitive function in depressed and non-depressed Parkinson patients at two time-points: following overnight withdrawal and after the usual morning regimen of dopaminergic medications. A total of 28 non-demented, right-handed patients with mild to moderate idiopathic Parkinson's disease participated. Ten of these patients were depressed according …

Diffuse Correlation Spectroscopy (Dcs) For Assessment Of Tissue Blood Flow In Skeletal Muscle: Recent Progress, Yu Shang, Katelyn Gurley, Guoqiang Yu

Biomedical Engineering Faculty Publications

Near-infrared diffuse correlation spectroscopy (DCS) is an emerging technology for monitoring blood flow in various tissues. This article reviews the recent progress of DCS for the assessment of skeletal muscle blood flow, including the developments in technology allowing use during dynamic exercise and muscular electrical stimulation, the utilization for diagnosis of muscle vascular diseases, and the applications for evaluating treatment effects. The limitations of current DCS studies and future perspective are finally discussed.

Binding, Transcytosis And Biodistribution Of Anti-Pecam-1 Iron Oxide Nanoparticles For Brain-Targeted Delivery, Mo Dan, David B. Cochran, Robert A. Yokel, Thomas D. Dziubla

Pharmaceutical Sciences Faculty Publications

OBJECTIVE: Characterize the flux of platelet-endothelial cell adhesion molecule (PECAM-1) antibody-coated superparamagnetic iron oxide nanoparticles (IONPs) across the blood-brain barrier (BBB) and its biodistribution in vitro and in vivo.

METHODS: Anti-PECAM-1 IONPs and IgG IONPs were prepared and characterized in house. The binding affinity of these nanoparticles was investigated using human cortical microvascular endothelial cells (hCMEC/D3). Flux assays were performed using a hCMEC/D3 BBB model. To test their immunospecificity index and biodistribution, nanoparticles were given to Sprague Dawley rats by intra-carotid infusion. The capillary depletion method was used to elucidate their distribution between the BBB and brain parenchyma.

RESULTS: Anti-PECAM-1 …

Compounds And Methods For Reducing The Occurrence Of Post-Surgical Adhesions, Thomas Dziubla, Eugene Kaplan, John Mark Medley Jr.

Chemical and Materials Engineering Faculty Patents

Compounds and methods for reducing the occurrence of a post-surgical adhesion are provided. The compounds can include acrylic acid groups and ethylene glycol groups, and can be directed to an area of damaged tissue by the incorporation of a fibrin targeting peptide. The compounds can further include a brush-like portion, capable of creating a steric barrier between a damaged tissue or organ and adjacent tissues or organs, and a targeting portion, capable of directing the compounds to a damaged tissue or organ. Methods of detecting damaged tissue and kits are also provided.

Updating The Kentucky Contract Time Determination System, Timothy R. B. Taylor, Paul M. Goodrum, Michael Brockman, Barry Bishop, Yongwei Shan, Roy E. Sturgill, Kevin Hout

Kentucky Transportation Center Research Report

The Federal Highway Administration requires State Transportation Agencies to have a formal method to estimate contract time for highway construction projects. To meet this requirement many states use an integrated scheduling system to estimate project durations based on assumed productivity rates and generic job logic. The current work investigated the accuracy of two of these systems found that both systems accuracy in predicting the duration of Kentucky Transportation Cabinet projects was greater than +200%. In response to this poor accuracy, a parametric project duration estimating tool was developed based on a multivariate regression analysis of bid item quantities and engineering …

Approximate Techniques In Solving Optimal Camera Placement Problems, Jian Zhao, Ruriko Yoshida, Sen-Ching Samson Cheung, David Haws

Statistics Faculty Publications

While the theoretical foundation of the optimal camera placement problem has been studied for decades, its practical implementation has recently attracted significant research interest due to the increasing popularity of visual sensor networks. The most flexible formulation of finding the optimal camera placement is based on a binary integer programming (BIP) problem. Despite the flexibility, most of the resulting BIP problems are NP-hard and any such formulations of reasonable size are not amenable to exact solutions. There exists a myriad of approximate algorithms for BIP problems, but their applications, efficiency, and scalability in solving camera placement are poorly understood. Thus, …

Workforce Assessment Of The Inland Waterways Industry: A Survey Of Current And Future Training And Personnel Needs, Lenahan O'Connell, Timothy J. Brock

Kentucky Transportation Center Research Report

This report describes the findings of a preliminary review of the workforce needs of the inland waterways industry, which currently confronts a human resources crisis and must recruit more people who can work their way up to the skilled positions on towboats. The looming surge in retirements will present a significant hurdle—especially as its large cohort of baby boom river pilots and captains reach retirement age. The industry will need to recruit, train, and retain competent personnel for a very demanding and important set of jobs. While many people can handle the tasks of a deckhand, only a minority will …