Engineering Commons^™

Universality Of Fast Quenches From The Conformal Perturbation Theory, Anatoly Dymarsky, Michael Smolkin

Physics and Astronomy Faculty Publications

We consider global quantum quenches, a protocol when a continuous field theoretic system in the ground state is driven by a homogeneous time-dependent external interaction. When the typical inverse time scale of the interaction is much larger than all relevant scales except for the UV-cutoff the system’s response exhibits universal scaling behavior. We provide both qualitative and quantitative explanations of this universality and argue that physics of the response during and shortly after the quench is governed by the conformal perturbation theory around the UV fixed point. We proceed to calculate the response of one and two-point correlation functions confirming …

Accurate Location Of Evolving Faults On Transmission Lines Using Sparse Wide Area Measurements, Xiangqing Jiao, Yuan Liao

Electrical and Computer Engineering Faculty Publications

In electric power systems, not all fault conditions remain unchanged during faults. An evolving fault has one characteristic initially and changes to a different condition subsequently. Locating evolving faults is challenging due to the change in fault type shortly after the fault initiation. This paper presents a new approach for estimating the locations of evolving faults on transmission lines. By using sparse wide area voltage measurements, this method is able to accurately locate evolving faults without requiring measurements from either end of the faulted line. There is no need to detect whether a fault is an evolving fault or not. …

Pit Evolution Around The Fusion Line Of A Nicrmov Steel Welded Joint Caused By Galvanic And Stress-Assisted Coupling Corrosion, Shuo Weng, Yuhui Huang, Fuzhen Xuan, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

The corrosion of NiCrMoV steel welded joints is performed in an aqueous solution of 3.5 wt% NaCl at 180 °C in a container at a pressure of 0.8 MPa. The specimens in the shape of cylindrical tensile rods are immersed in the aqueous solution under the action of tensile stress in a range of 0 to 0.9 of the yield stress of the base metal. The experimental results suggest that there is macro-galvanic corrosion in the welded joint with the coarse-grained heat affected zone (CGHAZ) as anode due to the highest corrosion susceptibility of the CGHAZ. The CGHAZ has the …

A Fast And Robust Extrinsic Calibration For Rgb-D Camera Networks, Po-Chang Su, Ju Shen, Wanxin Xu, Sen-Ching S. Cheung, Ying Luo

Electrical and Computer Engineering Faculty Publications

From object tracking to 3D reconstruction, RGB-Depth (RGB-D) camera networks play an increasingly important role in many vision and graphics applications. Practical applications often use sparsely-placed cameras to maximize visibility, while using as few cameras as possible to minimize cost. In general, it is challenging to calibrate sparse camera networks due to the lack of shared scene features across different camera views. In this paper, we propose a novel algorithm that can accurately and rapidly calibrate the geometric relationships across an arbitrary number of RGB-D cameras on a network. Our work has a number of novel features. First, to cope …

Correlation Of Structure, Function And Protein Dynamics In Gh7 Cellobiohydrolases From Trichoderma Atroviride, T. Reesei And T. Harzianum, Anna S. Borisova, Elena V. Eneyskaya, Suvamay Jana, Silke F. Badino, Jeppe Kari, Antonella Amore, Magnus Karlsson, Henrik Hansson, Mats Sandgren, Michael E. Himmel, Peter Westh, Christina M. Payne, Anna A. Kulminskaya, Jerry Ståhlberg

Chemical and Materials Engineering Faculty Publications

Background: The ascomycete fungus Trichoderma reesei is the predominant source of enzymes for industrial conversion of lignocellulose. Its glycoside hydrolase family 7 cellobiohydrolase (GH7 CBH) TreCel7A constitutes nearly half of the enzyme cocktail by weight and is the major workhorse in the cellulose hydrolysis process. The orthologs from Trichoderma atroviride (TatCel7A) and Trichoderma harzianum (ThaCel7A) show high sequence identity with TreCel7A, ~ 80%, and represent naturally evolved combinations of cellulose-binding tunnel-enclosing loop motifs, which have been suggested to influence intrinsic cellobiohydrolase properties, such as endo-initiation, processivity, and off-rate.

Results: The TatCel7A, ThaCel7A, …

Noncontact Three-Dimensional Diffuse Optical Imaging Of Deep Tissue Blood Flow Distribution, Guoqiang Yu, Yu Lin, Chong Huang

Biomedical Engineering Faculty Patents

The present invention provides for three-dimensional reflectance diffuse optical imaging of deep tissue blood flow distribution that removes the need for probe-tissue contact, thereby allowing for such technology to be applied to sensitive, vulnerable, damaged, or reconstructive tissue. The systems utilize noncontact application and detection of near-infrared light through optical lens and detection through a linear array or two-dimensional array of avalanche photodiodes or a two-dimensional array of detectors provided by charge-coupled-device (CCD). Both further feature a finite-element-method (FEM) based facilitation to provide for three-dimensional flow image reconstruction in deep tissues with arbitrary geometries.

Comparison Of Eosin And Fluorescein Conjugates For The Photoinitiation Of Cell-Compatible Polymer Coatings, Jacob L. Lilly, Anuhya Gottipati, Calvin F. Cahall, Mohamed Agoub, Brad J. Berron

Chemical and Materials Engineering Faculty Publications

Targeted photopolymerization is the basis for multiple diagnostic and cell encapsulation technologies. While eosin is used in conjunction with tertiary amines as a water-soluble photoinitiation system, eosin is not widely sold as a conjugate with antibodies and other targeting biomolecules. Here we evaluate the utility of fluorescein-labeled bioconjugates to photopolymerize targeted coatings on live cells. We show that although fluorescein conjugates absorb approximately 50% less light energy than eosin in matched photopolymerization experiments using a 530 nm LED lamp, appreciable polymer thicknesses can still be formed in cell compatible environments with fluorescein photosensitization. At low photoinitiator density, eosin allows more …

Synthesis And Characterization Of Blue Light Poly(Β-Amino Ester)S, Nicholas John Kohrs

Theses and Dissertations--Biomedical Engineering

Volumetric muscle loss (VML) is a debilitating injury which results in full or partial loss of function. Current clinical options utilize tissue grafts and bracing to restore function. Tissue graft implantation oftentimes leads to serious complications, some of which end in graft rejection and thereby necessitate further surgeries and procedures. Polymeric scaffolds show promise as scaffolding systems due to their mechanical properties and overall degradation profiles. Scaffolds need appropriate mechanical properties, 10-60 kPa modulus, and overall degradation times, five days to two weeks, to initiate tissue regeneration. Poly(β-amino ester)s (PBAE), a class of synthetic polymers, act as a safe biocompatible …

Effects Of Backpack Type On Kinematics Of The Lower Back During Walking And Jogging, Cazmon Suri

Theses and Dissertations--Biomedical Engineering

Heavy backpacks have been suggested to have a pathogenic role in experience of low back pain among children. We have conducted a repeated-measure study to investigate the backpack-induced changes in lumbo-pelvic coordination of forty gender-balanced college age students when they walked and jogged on a treadmill with two different types of backpacks: normal and ergonomically modified. The backpack-induced changes in lumbo-pelvic coordination were larger when carrying an ergonomically modified vs. a normal backpack as well as when jogging versus walking. The larger changes in lumbo-pelvic coordination when carrying an ergonomically modified backpack were likely due to kinematic restraints imposed by …

Stochastic Bi-Level Optimization Models For Efficient Operating Room Planning, Amin Abedini, Wei Li, Honghan Ye

Mechanical Engineering Faculty Publications

Within a hospital, the operating room (OR) department has the largest cost and revenue. Because of the aging population, the demand for surgical services has been increasing sharply in recent years. At the other hand, the rate of OR capacity expansion is lower than the rate of increasing demand. As a result, OR managers must leverage their resources by efficient OR planning. OR planning is challenging because of multiple competing\conflicting objectives such cost minimization and throughput maximization. Inherent uncertainty in the surgical procedures and patients arrivals complicate the decision making process. This increases the risk of non-realization of the system …

The Role Of Dense Slurry In Achieving Zero Liquid Discharge, D.M. Timmons, Istvan Kovacsics

Coal Combustion and Gasification Products Journal Archive

The Coal Combustion Residual (CCR) and Effluent Limitations Guidelines (ELGs) rules pose significant technical and economic challenges for ash management and for treatment and discharge of flue gas desulfurization (FGD) wastewater at coal-fired power plants. Beneficial use is always a priority for ash, but only about half is being reused on a national basis, and the rest is destined for disposal. The U.S. Environmental Protection Agency identified biological treatment as the baseline treatment technology for FGD wastewater in the ELGs. However, it is becoming evident that bioreactors exhibit high capital and operating costs, occupy significant space, and are sensitive to …

Evaluation Of 2-Cell Rc Box Culverts, Hossein Sharifi

Theses and Dissertations--Civil Engineering

Reinforced Concrete Box Culverts (RCBCs) are an integral part of the national and international transportation infrastructure. The National Bridge Inventory Standards (NBIS) requires that all bridges, which include culverts with spans ≥ 20 ft. (6.1 m), be load rated for safe load carrying capacity in accordance with the AASHTO Manual for Bridge Evaluation (MBE). In Kentucky, the Transportation Cabinet manages more than 15,500 bridges, of which almost 1,400 are bridge size culverts. Of the 1241 bridge size RCBCs that were being evaluated in Kentucky between 2015 and 2018, 846 were 2-cell culverts (or 68%). The objective in this study is …

Risk Management And Practice Alignment For Utility Coordination On Transportation Projects, Roy E. Sturgill Jr.

Theses and Dissertations--Civil Engineering

Utility coordination is an exceedingly complex effort of managing, communicating, and facilitating the avoidance and relocation of utility facilities as needed for highway projects. Utility coordination occurs throughout the design and delivery of a project and best practices are used to make sure this occurs efficiently and in the best interest of the public, who are not only the taxpayers but also the ratepayers. Recent research has attempted to enhance utility location technology and procedures, instill frameworks and tools for utility coordination, and proceduralize risk management relative to utility coordination. However, research attempting to improve various aspects of utility coordination …

3d Human Face Reconstruction And 2d Appearance Synthesis, Yajie Zhao

Theses and Dissertations--Computer Science

3D human face reconstruction has been an extensive research for decades due to its wide applications, such as animation, recognition and 3D-driven appearance synthesis. Although commodity depth sensors are widely available in recent years, image based face reconstruction are significantly valuable as images are much easier to access and store.

In this dissertation, we first propose three image-based face reconstruction approaches according to different assumption of inputs.

In the first approach, face geometry is extracted from multiple key frames of a video sequence with different head poses. The camera should be calibrated under this assumption.

As the first approach is …

Investigation Of Volatile Organic Compounds (Vocs) Detected At Vapor Intrusion Sites, Mohammadyousef Roghani

Theses and Dissertations--Civil Engineering

This dissertation investigates unexplained vapor intrusion field data sets that have been observed at hazardous waste sites, including: 1) non-linear soil gas concentration trends between the VOC source (i.e. contaminated groundwater plume) and the ground surface; and, 2) alternative pathways that serve as entry points for vapors to infiltrate into buildings and serve to increase VOC exposure risks as compared to the classic vapor intrusion model, which primarily considered foundation cracks as the route for vapor entry. The overall hypothesis of this research is that theoretical knowledge of fate and transport processes can be systematically applied to vapor intrusion field …

Assessing The Application Of The Unmanned Aerial Systems (Uas) In Earthwork Volume Measurement, Xi Wang

Theses and Dissertations--Civil Engineering

Earthwork operations are often one of the major cost items on infrastructure construction projects. Because earthwork is largely influenced by unstable construction conditions and organization plans, it becomes the emphasis and difficulties of the cost control in the construction process. Therefore, precise estimates of actual earthwork volumes are important for both owners and contractors alike to ensure appropriate payments are made. However, measuring work on site requires lots of time and labors because of various and irregular site conditions. Conventional measurement methods, such as planned quantities from the drawings or estimates from equipment activity, are rough estimates with significant opportunities …

Effect Of Socioeconomic And Demographic Factors On Kentucky Crashes, Aaron Berry Cambron

Theses and Dissertations--Civil Engineering

The goal of this research was to examine the potential predictive ability of socioeconomic and demographic data for drivers on Kentucky crash occurrence. Identifying unique background characteristics of at-fault drivers that contribute to crash rates and crash severity may lead to improved and more specific interventions to reduce the negative impacts of motor vehicle crashes. The driver-residence zip code was used as a spatial unit to connect five years of Kentucky crash data with socioeconomic factors from the U.S. Census, such as income, employment, education, age, and others, along with terrain and vehicle age. At-fault driver crash counts, normalized over …

Dust Control Examination Using Computational Fluid Dynamics Modeling And Laboratory Testing Of Vortecone And Impingement Screen Filters, Ashish R. Kumar

Theses and Dissertations--Mining Engineering

Heavy industries, such as mining, generate dust in quantities that present an occupational health hazard. Prolonged exposure to the respirable dust has been found to result in many irreversible occupational ailments in thousands of miners. In underground mining applications, a variety of scrubbing systems are used to remove dust near the zones of generation. However, the wire-mesh type fibrous screens in the flooded-bed dust scrubbers used on continuous miners, are prone to clogging due to the accumulation of dust particles. This clogging results in a reduced capture efficiency and a higher exposure to the personnel. This research establishes the Vortecone, …

Physio-Chemical And Functional Properties Of Nine Proso Millet Cultivars, Manjot Singh, Akinbode A. Adedeji, Dipak Santra

Biosystems and Agricultural Engineering Faculty Publications

Evaluation of the postharvest properties of nine proso millet cultivars was carried out to determine their physical and engineering properties, which are very useful for designing appropriate systems for process operations such as sorting, drying, heating, cooling, and milling. Nine cultivars of proso millet comprising waxy and non-waxy types, namely Cope, Earlybird, Huntsman, Minco, Plateau, Sunrise, Rise, Dawn, and Panhandle, were obtained from the Panhandle Research and Extension Center, University of Nebraska, Scottsbluff. Results showed significant (p < 0.05) differences in their physical properties, such as sphericity, volume, bulk density, porosity, and angle of repose, which ranged from 0.86 to 0.91, from 3.94 to 5.14 mm³, from 765.49 to 809.67 kg m^-3, from 42.49% to 44.20%, and from 22.98° to 25.74°, respectively. The cultivars were …

Stored Grain Pack Factor Measurements For Soybeans, Grain Sorghum, Oats, Barley, And Wheat, Rumela Bhadra, Mark E. Casada, Aaron P. Turner, Michael D. Montross, Sidney A. Thompson, Samuel G. Mcneill, Ronaldo G. Maghirang, Josephine M. Boac

Biosystems and Agricultural Engineering Faculty Publications

Grain and oilseed crops stored in bins undergo compaction due to overbearing pressure of the grain inside the structure. Thus, volume measurements of grain in bins need to be combined with the amount of packing (usually called pack factor) in addition to the initial density so that the mass in the structure can be calculated. Multiple pack factor prediction methods are in use in the grain industry, but they have only been validated in the literature and compared with field data for corn and hard red winter wheat. Predictions from WPACKING, the program in ASABE Standard EP413.2, and two standard …

Assessing Intra-Event Phosphorus Dynamics In Drainage Water Using Phosphate Stable Oxygen Isotopes, William Ford Iii, Mark R. Williams, Megan B. Young, Kevin W. King, Eric Fischer

Biosystems and Agricultural Engineering Faculty Publications

Quantifying fluxes and pathways of dissolved reactive phosphorus (DRP) in tile-drained landscapes has been hampered by a lack of measurements that are sensitive to P fate and transport processes. One potential tool to help understand these dynamics is the oxygen isotope signature of phosphate (δ¹⁸O_PO4); however, its potential benefits and limitations are not well understood for intra-event dynamics at the field scale. The objectives of this study were to quantify intra-event variability of δ¹⁸O_PO4 signatures in tile drainage water and assess the efficacy of δ¹⁸O_PO4 to elucidate mechanisms and flow …

Compressibility Of Fly Ash Under Ko Loading: Strain Rate Effects In Constant Rate Of Strain Testing, Jaime A. Mercado, Luis G. Arboleda-Monsalve, Tarunjit S. Butalia, Pedro J. Amaya

Coal Combustion and Gasification Products Journal Archive

Coal combustion processes produce large volumes of fly ash. The compressibility of fly ash was studied using moist tamping and drypluviation methods to achieve different void ratios before subjecting the material to compressive oedometric Ko loading (i.e., zero lateral deformation throughout the test). The class F fly ash used in this research was produced at a Midwest U.S. power plant. The material was initially characterized with hydrometer and specific gravity tests, and maximum and minimum realizable void ratios were determined. The compressibility characteristics of the fly ash material were studied at four strain rates, 1%/h, 10%/h, 40%/h, and 100%/h, and …

Influence Of Flow Rate On Leachability, John L. Daniels, Gautham P. Das

Coal Combustion and Gasification Products Journal Archive

The leaching potential of coal fly ash is often approximated with laboratory-based methods that expose columns of compacted material to synthetic precipitation. While this procedure can simulate aspects of the field condition, it remains difficult to replicate site-specific thermodynamic and kinetic constraints on geochemical processes. This article explores one aspect that contributes to the field/laboratory disparity, namely, the influence of flow rate and intermittency. Seven column-based leaching experiments were conducted with the same ash but with different flow rates and intermittency (i.e., infiltration pulsing), and results were evaluated in terms of aqueous sodium, calcium, and chromium concentrations in the effluent. …

Kinetic And Thermodynamic Parameters For The Adsorption Of Methylene Blue Using Fly Ash Under Batch, Column, And Heap Leaching Configurations, J.H. Potgieter, S. Pearson, C. Pardesi

Coal Combustion and Gasification Products Journal Archive

In this article, the use of fly ash, a low-cost adsorbent, for the removal of a toxic cationic dye, methylene blue (MB), from aqueous solution has been investigated. Fly ash is a waste by-product generated from coal combustion. Contrary to many other reported investigations, the fly ash was not treated prior to the experiments for this investigation. The study was done in order to ascertain the viability of using the waste material to remove cationic dyes from wastewater. While MB adsorption has been described often in batch studies, batch, column, and heap leaching studies were carried out under the same …

Universal And Excavatable Controlled Low Strength Material Using High Loss On Ignition Fly Ash And Limestone Screenings†, James T. Locum, L.K. Crouch, Daniel Badoe

Coal Combustion and Gasification Products Journal Archive

Limestone screenings and high loss on ignition (LOI) fly ash are by-products that are stockpiling because of their unintentional production and the negative effects when utilized in portland cement concretes. The research objective was to investigate whether these by-products could produce controlled low strength materials (CLSMs) meeting the three types of Tennessee Department of Transportation (TDOT) 204.06 flowable fill specifications. TDOT defines these CLSMs as the following: general use, excavatable, and early strength. Each type is required to have an inverted slump flow of not less than 15 inches (38.1 cm) while meeting ASTM International D6024 at 24 hours. Because …

Experimental Study On Surface Integrity Of Cryogenically Machined Ti-6al-4v Alloy For Biomedical Devices, M. Hardt, F. Klocke, B. Döbbeler, M. Binder, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Titanium and its alloys are widely used in the biomedical sector. In this field, titanium and its alloys are the material of choice for biomedical devices such as hip and knee replacements. Usually, a Total Hip Replacement (THR) is based on four components, made out of different materials due to the material properties associated with the functional performance. One approach to lower the overall manufacturing costs and enhance the reliability of THR’s is to manufacture the prosthesis out of one material. The titanium alloy Ti-6Al-4V is, therefore, feasible as it exhibits better osseous integration compared to other metallic materials used …

Objectively Measuring Effects Of Electro-Acupuncture In Parkinsonian Rhesus Monkeys, Rui Zhang, Anders H. Andersen, Peter A. Hardy, Eric Forman, April Evans, Yi Ai, Jin Yue, Guihua Yue, Don M. Gash, Richard Grondin, Zhiming Zhang

Magnetic Resonance Imaging and Spectroscopy Center Faculty Publications

Acupuncture has increasingly been used as an alternative therapy for treatment of Parkinson’s disease (PD). However, the efficacy of acupunture for PD still remains unclear. The present study was designed to objectively and safely monitor anti-parkinsonian effects of electroacupuncture (EA) and brain activity in nonhuman primates modeling human PD. Six middle-aged rhesus monkeys were extensively studied by a computerized behavioral testing battery and by pharmacological MRI (phMRI) scans with specific dopaminergic drug stimulations. All animals were evaluated for behavior and phMRI responses under normal, parkinsonian, parkinsonian with EA treatment and parkinsonian after EA treatment conditions. Stable parkinsonian features were observed …

Review Of Literature And Maintenance Practices At State Transportation Agencies, Bryan Gibson, Nancy Albright, Candice Y. Wallace, Christopher Van Dyke, Doug Kreis

Kentucky Transportation Center Technical Assistance Report

No abstract provided.

Kentucky Water Resources Research Institute Annual Technical Report Fy 2017, Kentucky Water Resources Research Institute, University Of Kentucky

KWRRI Annual Technical Reports (USGS’s 104b Grant Program)

The 2017 Annual Technical Report for Kentucky consolidates reporting requirements for the Section 104(b) base grant award into a single document that includes: 1) a synopsis of each student research enhancement project that was conducted during the period, 2) citations for related publications, reports, and presentations, 3) a description of information transfer activities, 4) a summary of student support during the period, and 5) notable awards and achievements.

No funds were requested for general program administration activities. However, travel funds were provided to support the participation of the director and associate director in the annual meeting of the National Institutes …

Adrenergic Stimulation In Acute Hyperglycemia: Effects On Cellular And Tissue Level Murine Cardiac Electrophysiology, Sridevi Thyagarajan

Theses and Dissertations--Biomedical Engineering

Cardiovascular complications associated with elevated levels of glucose in the blood (Hyperglycemia, HG) is a growing health concern. HG is known to be associated with a variety of cardiovascular morbidities including higher incidence of electrical disturbances. Although effects of chronic HG have been widely investigated, electrophysiological effects of acute hyperglycemia are relatively less known. Further, hyperglycemic effects on adrenergic response is not widely investigated. We used excised ventricular tissues from mice to record trans-membrane potentials during a variety of pacing protocols to investigate cellular/tissue level electrophysiological effects of acute hyperglycemia and adrenergic stimulation (1µM Isoproterenol, a β-adrenergic agonist). A custom …